Analog Devices

LT1491AIS - 44V Micropower Quad RRIO Op Amp | Analog Devices

MPN: LT1491AIS ✓ Aktif
2 V to 44 V total supply voltage Vdss 40 µA maximum Id 14-pin SO package Package
MOQ: 1 |

LT1491AIS Ringkasan

The Analog Devices LT1491AIS is a quad micropower rail-to-rail input and output operational amplifier with a 2V to 44V total supply-voltage range, 40 µA maximum quiescent current per amplifier, and a 200 kHz gain-bandwidth product. The device is offered in the 14-pin SO package identified by the “IS” ordering code. Its low-power operation and over-the-top input capability suit battery-powered instrumentation and industrial signal chains that require operation above the normal supply rails.

An operational amplifier is a voltage-controlled differential amplifier used to amplify, buffer, filter, or compare analog signals. The LT1491A belongs to the micropower operational-amplifier hierarchy, combining rail-to-rail input and output stages, low quiescent current, and a wide supply range. “Rail-to-rail input and output” means the amplifier can accept input signals close to either supply rail and produce output swing toward both rails, improving signal range in low-voltage systems.

The LT1491A family provides four amplifiers in each package and accepts single or split supplies with a total voltage between 2V and 44V. Maximum input offset voltage is 500 µV, while the gain-bandwidth product is 200 kHz. Slew rate reaches 0.07 V/µs. Each amplifier draws no more than 40 µA of quiescent current, making the device suitable for portable measurement systems where four active amplifiers would otherwise create a substantial standby load.

The LT1491A is designed for precision-oriented, low-frequency signal conditioning rather than high-speed waveform work. Its 200 kHz gain-bandwidth product supports closed-loop bandwidths below the unity-gain frequency, depending on noise gain and stability requirements. The 500 µV maximum offset is particularly relevant to current-sense, bridge-sensor, and feedback applications where a small DC error can dominate the measurement at low full-scale values.

Typical uses include battery-powered sensor interfaces, portable test equipment, industrial control modules, low-level signal conditioning, and precision current measurement. Its 44V maximum total supply voltage also allows operation in higher-voltage industrial systems when appropriate protection is implemented. The four-channel configuration reduces package count when a system requires several similar low-power amplifier functions.

Designers should use the manufacturer pin-description table and operating-limit tables when assigning PCB tracks. Input and output pins must remain within their absolute maximum ratings, including during supply transitions and fault conditions. Decoupling capacitors should be placed close to the supply pins, and sensitive analog inputs should be kept away from switching nodes to reduce coupled noise.

This product page combines manufacturer specifications, verified ordering information, practical design guidance, and same-package replacement analysis. It is intended to help engineers determine whether the LT1491AIS fits a micropower, high-voltage signal-conditioning design without assuming that merely similar amplifier functions guarantee pin-to-pin compatibility.

Pilihan pengganti yang segera untuk LT1491AIS — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

LT1491AHS#PBF

✅ Masuk Drop-In
📦 14-pin SO package
Same LT1491A quad rail-to-rail amplifier family and 14-pin SO footprint; suffix-specific grade and packaging must be confirmed

📋 Alternatif rujukan (tidak dalam katalog)

LT1491ACS#PBF

✅ Masuk Drop-In
📦 14-pin SO package
Same LT1491A family and 14-pin SO package family; suffix-specific electrical grade and temperature limits require confirmation

📋 Alternatif rujukan (tidak dalam katalog)

LT1491AHS

✅ Masuk Drop-In
📦 14-pin SO package
Same family and package, with the H suffix used in direct comparison listings instead of the I suffix

📋 Alternatif rujukan (tidak dalam katalog)

LT1491AIS Penilaian maksimum & Ciri-ciri Elektrik

Amplifier Type Quad general-purpose operational amplifier
Number of Amplifiers 4 channels
Supply Voltage Range 2 V to 44 V total supply voltage
Supply Configuration Single or split supply
Quiescent Current per Amplifier 40 µA maximum
Input Offset Voltage 500 µV maximum
Gain-Bandwidth Product 200 kHz
Slew Rate 0.07 V/µs
Input Common-Mode Range Rail-to-rail
Output Swing Rail-to-rail
Over-The-Top Operation Supported
Reverse Supply Protection Supported
Kemasan 14-pin SO package
Package Family SOIC family, surface-mount package

Panduan Konfigurasi Pin LT1491AIS soic family, surface-mount package

Konfigurasi pin untuk LT1491AIS (soic family, surface-mount package pakai). Komponen analog ini mempunyai pin masukan, keluaran, dan kuasa. Rujuk dokumen pengeluar untuk konfigurasi pengecualian, pemulihan, dan pin aktifkan. Ideal untuk pengawasan isyarat dan litar pengukur.

Garis bentuk pengecah pakai soic family, surface-mount package untuk LT1491AIS

Tiada data garisan pin yang diperoleh untuk LT1491AIS.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

LT1491AIS patut untuk 6 aplikasis: Battery-Powered Sensor Interfaces, Portable Test and Measurement, Industrial Current Sensing, Low-Power Data Acquisition, Precision Bridge and Resistance Measurement, Audio and Control Signal Buffers.

🧩

Battery-Powered Sensor Interfaces

The LT1491AIS fits low-power sensor conditioning because each of its four amplifiers draws no more than 40 µA of quiescent current while accepting single or split supplies from 2V to 44V total. Rail-to-rail inputs help preserve measurement range when sensor outputs approach the supply limits, and rail-to-rail outputs improve downstream utilization of low-voltage operating space. The 500 µV maximum input offset is relevant when conditioning low-level sensor signals, while the 200 kHz gain-bandwidth product is appropriate for filtering and instrumentation stages rather than high-speed waveform acquisition. Designers can use all four channels for buffering, gain, filtering, and threshold functions to reduce package count.

🔧

Portable Test and Measurement

Portable meters and field-test instruments benefit from the LT1491AIS because four precision-oriented channels are integrated into one 14-pin SO package. The 2V to 44V total supply range allows use with single low-voltage rails or split supplies, while the 500 µV maximum input offset helps preserve accuracy in low-level measurement paths. Its 200 kHz gain-bandwidth product supports measurement amplifiers, buffers, filters, and comparator functions, and the 40 µA per-amplifier quiescent current limits the impact on battery life. Rail-to-rail input and output operation also makes the device practical when the available input range and output swing must be used efficiently.

🏭

Industrial Current Sensing

The LT1491AIS can amplify small shunt-derived voltages in industrial current-measurement circuits when low offset and low standby power are priorities. The manufacturer specifies a maximum input offset voltage of 500 µV, which helps reduce output error in low-current measurements, and the rail-to-rail input stage can accept signals near the supply range. Four channels allow one amplifier to serve multiple sensing or conditioning functions. The 2V to 44V total supply capability accommodates suitable industrial rails, but designers must still protect inputs during switching events and confirm the exact suffix-specific operating limits. Its 200 kHz bandwidth is appropriate for typical current-loop and control signal paths.

📡

Low-Power Data Acquisition

The LT1491AIS is suited to slow, low-power acquisition channels that require buffering or amplification rather than high-speed conversion. Its 200 kHz gain-bandwidth product supports common gain, filtering, and summing stages for sensors and transducers, while the 0.07 V/µs slew rate provides adequate dynamic performance for many low-bandwidth measurements. Four channels reduce both PCB area and the number of power rails and bypass networks. Rail-to-rail operation increases usable input and output range, and the 40 µA per-channel quiescent current is valuable in distributed or battery-powered acquisition systems. System designers should verify stability for each feedback topology and noise-gain configuration.

🧪

Precision Bridge and Resistance Measurement

The LT1491AIS can support bridge-based resistance and pressure measurements when offset error must remain small relative to the sensor output. Its 500 µV maximum input offset reduces DC error, while four rail-to-rail amplifiers can provide excitation buffering, channel amplification, difference amplification, and output conditioning. The broad 2V to 44V total supply range supports multiple laboratory and industrial system architectures. Micro-power operation is valuable when the bridge interface is remote or battery powered. Designers should calculate the maximum shunt or sensor excitation current, verify input common-mode limits under imbalance, and keep sensitive input routing away from digital and switching-current paths.

🎧

Audio and Control Signal Buffers

The LT1491AIS can buffer low-level audio and control signals when low quiescent current matters more than wideband performance. Rail-to-rail input and output stages provide useful range in single-supply systems, and the four-channel package can handle left and right audio paths, monitoring, or control channels in a compact design. The 200 kHz gain-bandwidth product and 0.07 V/µs slew rate are suitable for many low-frequency audio and feedback functions, although they do not target high-fidelity wideband audio performance. Designers should verify capacitive-load stability, output-current requirements, and ground-return paths. Low-power operation helps limit heat and unwanted channel-to-channel coupling from supply noise.

Ringkasan Produk Disebarkan

LT1491AIS Analog Devices Dipergunakan di: Battery-Powered Sensor Interfaces, Portable Test and Measurement, Industrial Current Sensing, Low-Power Data Acquisition, Precision Bridge and Resistance Measurement, Audio and Control Signal Buffers LT1491AHS Same-family family variant Dipergunakan di: Battery-Powered Sensor Interfaces, Precision Bridge and Resistance Measurement LT1491ACS Same-family amplifier variant Dipergunakan di: Portable Test and Measurement LT1491AHS#PBF Same-family drop-in candidate Dipergunakan di: Industrial Current Sensing, Audio and Control Signal Buffers LT1491ACS#PBF Same-family package alternative Dipergunakan di: Low-Power Data Acquisition
What is the LT1491AIS?
The LT1491AIS is a four-channel, micropower operational amplifier with rail-to-rail input and output stages and a 2V to 44V total supply range. According to the Analog Devices manufacturer datasheet, it combines a 200 kHz gain-bandwidth product, 0.07 V/µs slew rate, 500 µV maximum input offset voltage, and no more than 40 µA of quiescent current per amplifier. It is intended for low-power precision signal conditioning.
What is the operating voltage range of the LT1491AIS?
The LT1491AIS operates from 2V to 44V total supply voltage and accepts single or split supplies. The Analog Devices manufacturer datasheet identifies over-the-top operation as an additional capability for applications where an input may exceed the nominal supply range. Absolute maximum ratings must still be respected during power sequencing, fault conditions, and supply transients.
How much current does each LT1491AIS amplifier consume?
Each LT1491AIS amplifier draws at most 40 µA of quiescent current. With four amplifiers in one package, the datasheet describes the device as a micropower quad amplifier suited to battery-powered and portable instrumentation. Actual circuit consumption also depends on output activity, feedback-network values, load current, supply voltage, and the selected operating frequency.
Is the LT1491AIS suitable for battery-powered sensors?
Yes, the LT1491AIS is suitable for battery-powered sensor interfaces because each amplifier consumes no more than 40 µA of quiescent current. Its rail-to-rail input and output capability also increases usable signal range in low-voltage systems. The Analog Devices manufacturer datasheet specifies 200 kHz gain-bandwidth product and 500 µV maximum offset, supporting precision filtering, buffering, and current-sense amplification.
What are the key specifications of LT1491AIS that engineers should know?
The principal LT1491AIS specifications are four amplifier channels, a 2V to 44V total supply range, 40 µA maximum quiescent current per amplifier, 200 kHz gain-bandwidth product, 0.07 V/µs slew rate, and 500 µV maximum input offset voltage. The Analog Devices manufacturer datasheet also identifies rail-to-rail inputs and outputs, over-the-top operation, and reverse supply protection as important functional characteristics.
Where can I download the LT1491AIS datasheet PDF?
Download the LT1491AIS family datasheet from the Analog Devices technical-documentation link listed on this page. The document covers the LT1490A dual and LT1491A quad micropower rail-to-rail operational amplifiers, including electrical characteristics, pin descriptions, package information, and application guidance. Use the manufacturer document when assigning pins or checking absolute maximum ratings.
Where can I find the LT1491AIS pinout?
Use the pin-description table in the Analog Devices manufacturer datasheet to find the LT1491AIS pinout. The verified ordering information identifies the device as a 14-pin SO package, but a complete numbered pin list is not reproduced here. The pin-description table is the authoritative reference for amplifier inputs, outputs, supply pins, and package orientation.
Can LT1491AIS replace LT1491AHS?
The LT1491AIS and LT1491AHS are closely related Analog Devices order codes associated with the same 14-pin SO-family package family, but replacement should be confirmed against the manufacturer ordering table. Both are identified in the manufacturer family documentation and comparison listings, while the suffix can encode grade and packaging information. Verify electrical limits, temperature grade, markings, and production status before substitution.
What can replace the LT1491AIS?
LT1491AIS and LT1491AHS order codes are the closest documented same-brand alternatives, with LT1491ACS providing another family variant listed in comparison results. A true drop-in replacement must use the same 14-pin SO footprint and pin assignment and must meet the original circuit’s voltage, offset, bandwidth, quiescent-current, and common-mode requirements. The manufacturer ordering table should confirm each suffix before PCB reuse.
Is the LT1491AIS the same as LT1491AHS?
The LT1491AIS and LT1491AHS belong to the same LT1491A amplifier family, but they are not automatically identical order codes. The Analog Devices comparison information identifies the LT1491AHS#PBF as a 14-pin SO-family variant with tube packaging details, while LT1491AIS#PBF is the lead-free SO package ordering code. Confirm suffix-specific grade, package, and operating requirements before treating them as interchangeable.
What is the best Analog Devices equivalent for the LT1491AIS?
The LT1491AHS#PBF is the closest documented Analog Devices alternative for the LT1491AIS because it appears in direct family comparisons and uses the same 14-pin SO package family. It shares the LT1491A series architecture, including a 180 kHz gain-bandwidth product in the comparison listing, 60 µV/µs-class performance, and rail-to-rail operation. Verify the exact ordering table and production status before using it as a drop-in substitute.
LT1491AIS vs LT1491AHS: which is better for a precision interface?
Choose the LT1491AIS when the board design calls for the specific IS order code and its lead-free 14-pin SO packaging; choose LT1491AHS only after confirming its grade and package details in the Analog Devices ordering table. The documented family comparison lists both as four-channel rail-to-rail amplifiers with 180 kHz gain-bandwidth product and approximately 60 µV/µs slew rate. Circuit requirements should determine the final selection.
When should I choose the LT1491AIS over another quad amplifier?
Choose the LT1491AIS when the design needs four amplifiers, rail-to-rail input and output operation, a 2V to 44V total supply range, and very low standby consumption. Its 40 µA maximum quiescent current per amplifier is the central selection criterion for battery-operated instrumentation. A different amplifier may offer greater bandwidth or lower offset, but it must still satisfy the voltage, current, layout, and stability requirements of the application.
Is the LT1491AIS suitable for industrial signal conditioning?
Yes, the LT1491AIS is suitable for low-frequency industrial signal conditioning when its 2V to 44V supply capability, rail-to-rail operation, and 200 kHz gain-bandwidth product meet the system requirements. The 500 µV maximum offset can be important in current-sense and bridge-measurement circuits. Confirm the suffix-specific temperature grade and absolute maximum limits against the manufacturer ordering information.
Where to buy LT1491AIS online?
Use the Request a Quote form on this page to request current LT1491AIS availability, authorized sourcing, and order handling. The part is a standard catalog item with a manufacturer datasheet and multiple distribution records, but stock and delivery schedules can change. Submit the exact LT1491AIS order code and required quantity so the request can be matched without relying on an obsolete third-party inventory page.
What is the price and lead time for the LT1491AIS?
Request the current LT1491AIS unit price, quantity breaks, stock position, and lead time through the Request a Quote form on this page. Pricing and availability are maintained separately from the technical description because they can vary with order quantity, date, and market conditions. Include the exact LT1491AIS order code, target quantity, and any required production-planning information.

Data referensi kejuruteraan untuk LT1491AIS — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose the LT1491AIS for portable or industrial low-frequency signal conditioning when four channels, rail-to-rail inputs and outputs, a 2V to 44V total supply range, and no more than 40 µA of quiescent current per amplifier are important. Its 500 µV maximum offset is useful in current-sense and bridge-measurement paths, while 200 kHz bandwidth suits filtering and buffering rather than high-speed waveform work. LT1491AHS and LT1491ACS are close family alternatives when their suffix-specific grade, packaging, and production status are acceptable. The documented LT1491AHS comparison rating is slightly lower at 180 kHz bandwidth and 0.06 V/µs slew rate. No cross-brand part was documented as a guaranteed 14-pin SO pin-to-pin replacement, so do not substitute based only on similar micropower or rail-to-rail ratings. Confirm the manufacturer ordering table, exact pin assignment, temperature grade, absolute maximum ratings, and availability before committing a replacement to production.

Perbandingan dengan Gantian

Parametr Produk Ini LT1491AHS#PBF LT1491ACS#PBF LT1491AHS
Brand Analog Devices Analog Devices Analog Devices Analog Devices
Package 14-pin SO package 14-pin SO package 14-pin SO package 14-pin SO package
Number of Channels 4 4 4 4
Total Supply Voltage 2 V to 44 V 2 V to 44 V 2 V to 44 V 2 V to 44 V
Quiescent Current per Amplifier 40 µA maximum 40 µA maximum 40 µA maximum 40 µA maximum
Input Offset Voltage 500 µV maximum 500 µV maximum 500 µV maximum 500 µV maximum
Input and Output Operation Rail-to-rail Rail-to-rail Rail-to-rail Rail-to-rail

Penyeberangsung Jelas

  • Wide total supply range for micropower operation (vsLT1491AHS#PBF)
  • Four rail-to-rail amplifiers in one 14-pin SO package (vsLT1491ACS#PBF)
  • Bandwidth advantage over the H-suffix comparison listing (vsLT1491AHS)

Catatan Desain

Place the supply bypass capacitor immediately between the positive supply and ground pins of the LT1491AIS, with the shortest and lowest-inductance connection possible. Keep sensitive input traces away from power switches, relay contacts, inductors, and high-current return paths. Because the amplifier has rail-to-rail inputs, exposed traces may collect more interference than inputs biased near a midpoint, so route each channel according to its sensitivity and use a quiet ground reference.

Do not treat the over-the-top capability as permission to exceed the absolute maximum input and output ratings. During shutdown, supply reversal, or a disconnected sensor, an input can move beyond the normal operating rails and damage the amplifier. Add series resistance or external clamping where the source can exceed the allowed range, and check the suffix-specific absolute maximum table before choosing operating limits.

Verify stable operation at the actual noise gain of every channel. The LT1491AIS is a micropower precision amplifier with 200 kHz gain-bandwidth product, so inverting stages, capacitive loads, and sensor capacitance can affect stability. Use the manufacturer feedback and compensation guidance, keep feedback paths compact, and avoid excessive loading on the output. Stable operation should be checked across supply, temperature, and process variation rather than only at nominal conditions.

Estimated: using the maximum 40 µA quiescent current per amplifier, all four channels consume up to 160 µA before input bias current, output-load current, and feedback-network losses are included. At a 5V supply, the quiescent contribution is approximately 0.8 mW. Actual board demand will be higher because sensor bias currents and external loads may dominate, so calculate the complete power budget before assigning battery capacity.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bosong logam timbal
Yes
Bosong halogen
Unknown
Mineral konflik
Unknown

The LT1491AIS#PBF ordering code includes the lead-free finish designation. No explicit RoHS, REACH, halogen-free, conflict-minerals, or AEC-Q100 statement was identified.

Pencarian Berhubungan

LT1491AIS datasheet LT1491AIS pinout LT1491AIS datasheet pdf Analog Devices LT1491AIS LT1491AIS 44V quad op amp LT1491AIS micropower amplifier LT1491AIS rail to rail LT1491AIS SOIC-14 pinout LT1491AIS equivalent LT1491AIS replacement LT1491AIS vs LT1491AHS LT1491AIS cross reference LT1491AIS application circuit LT1491AIS price LT1491AIS stock

Komponen dan Tanda berkaitan

Analog Devices Linear Technology LT1491AIS LT1491AHS#PBF LT1491ACS#PBF LT1491AHS LT1491A operational amplifier micropower amplifier quad amplifier rail-to-rail input rail-to-rail output over-the-top amplifier precision signal conditioning current-sense amplifier bridge measurement gain-bandwidth product input offset voltage quiescent current slew rate 2 V to 44 V supply 14-pin SO package SOIC family surface-mount package battery-powered instrumentation
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ