Analog Devices

MAX3095ESE/GG8 - 10Mbps Quad RS-485 Receiver | Analog Devices

MPN: MAX3095ESE/GG8 ✗ Akhir Hayat
4.75 V to 5.25 V Vdss RS-422 and RS-485 Rds(on) 16-pin SOIC Package
MOQ: 1 |

MAX3095ESE/GG8 Ringkasan

The Analog Devices MAX3095ESE/GG8 is a rugged, low-power quad RS-422/RS-485 receiver with 10 Mbps data-rate capability and reinforced electrostatic-discharge protection, packaged in a 16-pin SOIC. It integrates four differential receivers, accepts both RS-422 and RS-485 signaling, and is designed for communication links exposed to electrical noise and electrostatic discharge.

A differential line receiver is an interface circuit that interprets the voltage difference between a pair of signal conductors. RS-422 and RS-485 are balanced, differential communication standards used to transmit data reliably over cables. The MAX3095 family supports four receiver channels, allowing one device to handle several isolated point-to-point RS-422 links or multiple receivers connected to an RS-485 multidrop bus. The receiver also provides 45 mV receiver hysteresis according to the product comparison data.

The MAX3095/MAX3096 family is specified for a 4.75 V to 5.25 V supply and a maximum data rate of 10 Mbps. Its input protection is specified at ±15 kV using the IEC 1000-4-2 air-gap discharge method and ±8 kV using IEC 1000-4-2 contact discharge. These ratings make the receiver appropriate for industrial, telecommunications, instrumentation, and data-acquisition equipment where exposed connectors can accumulate electrostatic discharge.

The MAX3095 and MAX3096 are pin-compatible low-power upgrades to the industry-standard 26LS32 receiver family. The MAX3095 is intended for RS-422 and RS-485 applications, while the MAX3096 is associated with RS-423. Both use a space-saving surface-mount package, and the MAX3095 family includes narrow-SOIC ordering options. The ESE suffix identifies the 16-pin SOIC configuration, while the /GG8 suffix identifies the tube-packaging form.

Typical uses include industrial RS-485 control networks, factory data buses, telecommunications equipment, instrumentation interfaces, and external connection ports. Because the device contains four receivers, it can reduce receiver count in systems with four differential channels. A complete interface still requires correct termination, fail-safe biasing, grounding, cable routing, and protection coordination with the system architecture.

Designers should treat the protection rating as a component-level specification, not as permission to omit external protection. Keep differential routing symmetrical and controlled, place the receiver close to the connector, and provide a defined ground reference. For RS-485 multidrop networks, verify termination and bias values for the selected cable length, topology, and fault conditions before releasing the PCB.

This product page combines manufacturer specifications, lifecycle information, same-footprint alternatives, interface-selection guidance, and practical implementation notes. It is intended to help engineers determine whether the MAX3095ESE/GG8 meets the required speed, channel count, package, environmental robustness, and supply constraints before completing a drop-in design review.

Pilihan pengganti yang segera untuk MAX3095ESE/GG8 — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

Varietas dalam siri ini

Model serupa yang kompatibel dengan pengganti yang segera MAX3095ESE/GG8 (sama faktor bentuk dan kaki) — berbeza dalam Package, Number of Receivers, Data Rate, Number of Drivers, Product Type.

Analog Devices
Package: 16-pin QSOP
Number of Receivers: 4
Data Rate: 10 Mbps (minimum)
Maxim Integrated
Package: QSOP-16 (0.154", 3.90 mm wide)
Number of Receivers: 4
Number of Drivers: 0 (receive-only device)
Analog Devices
Number of Receivers: 4
Data Rate: 10 Mbps
Product Type: Quad RS-422/RS-485 receiver

MAX3095ESE+

✅ Masuk Drop-In
Analog Devices
📦 16-pin SOIC
Quad RS-422/RS-485 receiver · 4 · 10 Mbps · 3 V to 5 V · ±15 kV · 16-pin SOIC · RS-422 and RS-485

Hubungi untuk harga

Lihat Datasheet →

MAX3095EEE+

✅ Masuk Drop-In
Maxim Integrated
📦 16-pin SOIC
Quad differential line receiver (RS-422/RS-485) · 4 · 0 (receive-only device) · 10 Mbps · 4.75 V to 5.25 V · 3 V / 5 V (MAX3095/MAX3096 family) · ±15 kV · IEC 61000-4-2

Hubungi untuk harga

Lihat Datasheet →

MAX3095CEE+

✅ Masuk Drop-In
Analog Devices
📦 16-pin SOIC
Receiver (0/4 driver/receiver) · RS-422, RS-485 · 4 · 10 Mbps (minimum) · 4.75 V to 5.25 V (5 V nominal) · 13 mA typical (all channels active) · ±15 kV HBM · -7 V to +12 V

Hubungi untuk harga

Lihat Datasheet →

MAX3096ESE/GG8

✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 16-pin SOIC
Same pin-compatible 16-pin SOIC MAX309x receiver family; RS-423 emphasis differs from the MAX3095's RS-422/RS-485 application with 10% nominal parameter proximity.

📋 Alternatif rujukan (tidak dalam katalog)

MAX3096ESE+

✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 16-pin SOIC
Same pin-compatible MAX309x 16-pin SOIC arrangement; intended RS-423 interface differs from the target's RS-422/RS-485 use, with 10% nominal parameter proximity.

📋 Alternatif rujukan (tidak dalam katalog)

MAX3095ESE/GG8 Spesifikasi

Receiver Configuration 4 receivers
Supported Standards RS-422 and RS-485
Maximum Data Rate 10 Mbps
Supply Voltage Range 4.75 V to 5.25 V
Receiver Hysteresis 45 mV
Air-Gap ESD Protection ±15 kV using IEC 1000-4-2
Contact ESD Protection ±8 kV using IEC 1000-4-2
Number of Drivers 0 drivers
Number of Receivers 4 receivers
Kemasan 16-pin SOIC
Jenis Pemasangan Surface mount
Packaging Tube
Product Family MAX3095 quad differential receiver
Pin-Compatibility Reference 26LS32 receiver family

Panduan Konfigurasi Pin MAX3095ESE/GG8 16-pin soic

Konfigurasi pin untuk MAX3095ESE/GG8 (16-pin soic pakai). Penomeran pin, fungsi, dan garis bentuk koneksi ditakrifkan dalam dokumen pengeluar. Rujuk dokumen untuk kebentuk dan pedoman pengasman.

Garis bentuk pengecah pakai 16-pin soic untuk MAX3095ESE/GG8

Tiada data garisan pin yang diperoleh untuk MAX3095ESE/GG8.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

MAX3095ESE/GG8 patut untuk 6 aplikasis: Industrial RS-485 Control Bus, Telecommunications Equipment Interface, Data Acquisition and Instrumentation, RS-422 Point-to-Point Communication, External I/O and Connector Protection, Factory Automation Multi-Axis Controller.

🏭

Industrial RS-485 Control Bus

The MAX3095ESE/GG8 fits receive ports on industrial controller boards that must decode four differential RS-485 channels at up to 10 Mbps. Its four integrated receivers reduce the number of separate receiver packages needed on multi-axis machinery, remote I/O, or factory-control equipment. The specified ±15 kV IEC 1000-4-2 air-gap and ±8 kV contact ESD protection add useful robustness at a connector-adjacent interface. The 4.75 V to 5.25 V operating range suits a conventional 5 V rail. Design still requires correct common-mode grounding, cable termination, fail-safe biasing, and external surge protection when field cables extend beyond the enclosure.

🌐

Telecommunications Equipment Interface

The MAX3095ESE/GG8 is appropriate for telecommunications equipment that receives differential data from backplanes, remote modules, or protected cable ports. A 10 Mbps maximum data rate supports faster control and status links than low-speed legacy receiver families, while four channels allow one package to serve several independent receiver functions. Its low-power receiver architecture and surface-mount 16-pin SOIC construction simplify board integration where space is limited. ESD protection on every receiver input improves resilience at accessible interfaces, but engineers should coordinate it with chassis grounding, isolation boundaries, and a complete surge-protection strategy for externally connected lines.

📟

Data Acquisition and Instrumentation

The MAX3095ESE/GG8 can receive measurement and control data from balanced sensor or instrument links in laboratory and industrial acquisition systems. Four differential inputs provide a practical advantage when several transducers or remote instrument channels share the same receiver package. The 45 mV hysteresis helps reject small noise fluctuations around the switching threshold, and the 10 Mbps capability allows the receiver to handle higher-rate digital status links in addition to slower sensor interfaces. PCB implementation should preserve differential symmetry, provide a stable reference ground, and separate sensitive analog paths from high-energy cable transients.

🔧

RS-422 Point-to-Point Communication

The MAX3095ESE/GG8 supports four RS-422 point-to-point receive channels where a transmitter drives one differential pair per channel. The receiver-only architecture is appropriate when the system already contains separate transmit circuitry and needs a dedicated, protected receive section. Its 10 Mbps capability accommodates many moderate-distance control, status, and synchronization links, while 45 mV hysteresis improves noise immunity. Unlike a multidrop RS-485 network, each RS-422 link is generally point-to-point, so termination and biasing should be designed separately for each channel according to cable length and source configuration.

🔌

External I/O and Connector Protection

The MAX3095ESE/GG8 is useful on boards with external differential I/O connectors where electrostatic discharge is a primary concern. With every receiver input protected to ±15 kV for IEC 1000-4-2 air-gap discharge and ±8 kV for contact discharge, it provides component-level protection against ESD entering through attached cables. The four-channel count permits several protected receive inputs without duplicating discrete receiver circuitry. Place the device near the connector entry point, route the differential pair as a tightly coupled pair, establish a low-impedance chassis-to-board ground strategy, and add coordinated surge protection if the port also faces lightning or industrial transients.

🤖

Factory Automation Multi-Axis Controller

A multi-axis motion or factory-automation controller can use the MAX3095ESE/GG8 to receive four differential status or command links from remote axes and controllers. Consolidating four receivers into one 16-pin SOIC can simplify routing compared with four separate packages, while the 10 Mbps rate is suitable for many embedded control and diagnostic channels. The device's receiver-only organization means transmit functions must be provided separately when the board also sends commands. Engineers should evaluate cable length, node topology, ground potential differences, and fault-safe biasing before deciding whether an isolated interface is required.

Ringkasan Produk Disebarkan

MAX3095ESE+ Analog Devices Dipergunakan di: Industrial RS-485 Control Bus, Data Acquisition and Instrumentation, External I/O and Connector Protection MAX3096ESE/GG8 Pin-compatible MAX309x receiver family member Dipergunakan di: Industrial RS-485 Control Bus, RS-422 Point-to-Point Communication MAX3095EEE+ Maxim Integrated Dipergunakan di: Telecommunications Equipment Interface, RS-422 Point-to-Point Communication, Factory Automation Multi-Axis Controller MAX3096ESE+ Related MAX309x differential receiver family Dipergunakan di: Telecommunications Equipment Interface, Factory Automation Multi-Axis Controller MAX3095CEE MAX3095 family option for an alternate temperature-grade configuration Dipergunakan di: Data Acquisition and Instrumentation, External I/O and Connector Protection
What is the MAX3095ESE/GG8?
The MAX3095ESE/GG8 is a four-channel RS-422/RS-485 differential receiver rated for 10 Mbps operation and packaged in a 16-pin SOIC. According to the Analog Devices product page, it is a rugged, low-power receiver with electrostatic-discharge protection for harsh environments. The device contains no transmitters, so it is intended for receive-only or receiver-focused interface designs.
What are the key specifications of MAX3095ESE/GG8 that engineers should know?
The MAX3095ESE/GG8 combines four receivers, a 10 Mbps maximum data rate, a 4.75 V to 5.25 V supply range, and 45 mV receiver hysteresis. According to the Analog Devices product information, every receiver input supports ±15 kV IEC 1000-4-2 air-gap discharge protection and ±8 kV IEC 1000-4-2 contact discharge protection. It is packaged as a 16-pin surface-mount SOIC.
Where can I download the MAX3095ESE/GG8 datasheet PDF?
The official MAX3095 datasheet and product information are available from the Analog Devices MAX3095 product page. Use that manufacturer page to obtain the current MAX3095/MAX3096 data sheet and pin-description information. The ESE package variant corresponds to the 16-pin SOIC ordering option, while /GG8 denotes the tube-packaging form used by the target MPN.
Where can I find the MAX3095ESE/GG8 pinout?
Use the pin-description table and package drawing in the MAX3095/MAX3096 manufacturer data sheet to assign the 16-pin SOIC connections. The manufacturer describes the MAX3095 and MAX3096 as pin-compatible with the 26LS32 receiver family. The complete numbered pin names are not published in the product excerpts, so consult the official data sheet before assigning PCB tracks or connector nets.
What is the best drop-in replacement for MAX3095ESE/GG8?
The closest same-family drop-in candidates include the MAX3095ESE+, MAX3095EEE+, MAX3095CEE, and MAX3096ESE/GG8 when their electrical functions match the intended RS-422/RS-485 interface. The MAX3095 and MAX3096 families are described by Analog Devices as pin-compatible, but engineers must still verify supply voltage, receiver thresholds, propagation timing, exposed pad requirements, and the original component's lifecycle requirements before substitution.
Can MAX3095ESE/GG8 be replaced without changing the PCB?
The MAX3095ESE/GG8 uses a 16-pin SOIC footprint, and the MAX3095 family includes corresponding narrow-SOIC ordering variants. A no-change replacement is technically plausible when the alternative has the same pin arrangement, supply range, receiver count, and required RS-422/RS-485 characteristics. Nevertheless, board replacement should follow an engineering comparison rather than rely on the package name alone.
MAX3095ESE/GG8 vs MAX3096ESE/GG8 - which should I choose?
Choose the MAX3095ESE/GG8 for an RS-422/RS-485 receiver design, and choose the MAX3096ESE/GG8 for an RS-423-oriented interface. Analog Devices identifies the MAX3095 and MAX3096 as pin-compatible low-power upgrades to the 26LS32 family, making their physical arrangement closely related. The standards interface remains the decisive distinction, so verify the transceiver's other specifications before changing device families.
When should I choose MAX3095ESE/GG8 over MAX3095ESE+?
Choose the MAX3095ESE/GG8 when tube-packaged production parts are specifically required and the exact ordering configuration remains obtainable through an approved sourcing channel. Choose the MAX3095ESE+ when its commercial availability and lifecycle terms better fit the procurement plan. Both identify the MAX3095 16-pin SOIC receiver configuration, but procurement conditions can make one ordering suffix more suitable than the other.
Is MAX3095ESE/GG8 suitable for industrial RS-485 networks?
The MAX3095ESE/GG8 is suitable for many industrial RS-485 receive interfaces because it provides four differential receivers, 10 Mbps operation, and specified IEC 1000-4-2 ESD protection. Suitability still depends on the cable length, topology, grounding, common-mode range, isolation, and connector exposure. Use transient and surge protection at the cable boundary when the installation exceeds the component's specified ESD conditions.
How much ESD protection does MAX3095ESE/GG8 provide?
The MAX3095ESE/GG8 provides ±15 kV protection using the IEC 1000-4-2 air-gap discharge method and ±8 kV protection using the IEC 1000-4-2 contact discharge method. According to the Analog Devices MAX3095 product page, all receiver inputs carry this protection. These ratings address electrostatic-discharge immunity and do not replace surge, overvoltage, or lightning protection.
What can replace MAX3095ESE/GG8?
Potential replacements include the MAX3095ESE+, MAX3095EEE+, MAX3095CEE, MAX3096ESE+, and MAX3096ESE/GG8, subject to the required standard and pin-level review. The MAX3095ESE+ is the closest ordering alternative for the same 16-pin SOIC receiver configuration. The MAX3096 alternatives are appropriate only when RS-423 behavior is acceptable for the interface.
Is MAX3095ESE/GG8 the same as MAX3095ESE+?
The MAX3095ESE/GG8 and MAX3095ESE+ identify the same MAX3095 16-pin SOIC receiver configuration, with /GG8 specifying a tube-packaging order form. Their electrical function is therefore closely aligned. Availability, lot traceability, acquisition terms, and any suffix-specific commercial conditions should still be checked before treating them as interchangeable for a current production build.
What is the best Analog Devices equivalent for MAX3095ESE/GG8?
The MAX3095ESE+ is the closest same-manufacturer alternative because it retains the MAX3095 family, four-receiver arrangement, 16-pin SOIC package, 10 Mbps capability, and supported supply range. Use it when procurement conditions favor that ordering form. For an RS-423 design, the MAX3096 family is relevant instead, but it should not replace an RS-485-specific function without interface review.
Where to buy MAX3095ESE/GG8 online?
Use the Request a Quote form on this page to request MAX3095ESE/GG8 availability, current commercial terms, and the required tube-packaging quantity. The component is identified as obsolete in a published comparison record, so procurement should include a documented lifecycle plan and manufacturer-supported sourcing strategy. Avoid assuming that a distributor search result guarantees production availability.
What is the price of MAX3095ESE/GG8?
The current price for MAX3095ESE/GG8 should be requested through the Request a Quote form on this page. No qualifying quantity-break price is published in the captured listings, so this page does not present a static price or infer a tier. Because the target is marked obsolete, request the quotation, traceability information, remaining-life status, and any available authorized-sourcing terms together.
What is the lead time and stock status for MAX3095ESE/GG8?
Current stock, lead time, and minimum order quantity for MAX3095ESE/GG8 should be confirmed through the Request a Quote form on this page. The target is marked obsolete in a published comparison record, and the captured product listing does not establish a stock quantity or delivery schedule. Include the required tube quantity, date code, and traceability criteria in the request.

Data referensi kejuruteraan untuk MAX3095ESE/GG8 — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose the MAX3095ESE/GG8 when the design requires four 10 Mbps RS-422 or RS-485 receivers in a 16-pin SOIC, specifically accepts the tube-packaged ordering form, and can support an obsolete-product sourcing plan. The MAX3095ESE+ is the closest procurement alternative because it retains the same family and electrical configuration; confirm current availability and traceability before release. The MAX3095EEE+ and MAX3095CEE are useful when their ordering or temperature-grade conditions fit the production program. Consider the MAX3096ESE/GG8 or MAX3096ESE+ only for an RS-423 interface, because their standard emphasis differs even though the package family is pin-compatible. No substitution should be approved until pin functions, supply voltage, receiver thresholds, timing, environmental requirements, and the manufacturer data sheet have been checked against the original design.

Perbandingan dengan Gantian

Parametr Produk Ini MAX3095ESE+ MAX3095EEE+ MAX3095CEE MAX3096ESE/GG8 MAX3096ESE+
Package 16-pin SOIC 16-pin SOIC - same 16-pin SOIC - same 16-pin SOIC - same 16-pin SOIC - same 16-pin SOIC - same
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Receiver Configuration 4 receivers 4 receivers 4 receivers 4 receivers 4 receivers 4 receivers
Supported Protocol RS-422 and RS-485 RS-422 and RS-485 RS-422 and RS-485 RS-422 and RS-485 RS-423 RS-423
Number of Drivers 0 0 0 0 0 0

Penyeberangsung Jelas

  • Four high-speed differential receivers in one interface package (vsMAX308ESE+T)
  • Documented ESD protection on every receiver input (vsMAX3095CEE)
  • Pin-compatible MAX309x family options (vsMAX3096ESE/GG8)

Catatan Desain

Route each differential receiver pair as a tightly coupled pair with continuous reference to the board ground plane. Place the MAX3095ESE/GG8 close to the connector entry and minimize the distance from the connector pins to the receiver inputs. Avoid routing these signals adjacent to switching nodes or high-current return paths. Maintain symmetric spacing between each pair so external noise induces similar voltage disturbances on both conductors.

Do not treat the specified ESD ratings as a complete industrial surge-protection solution. The receiver provides ±15 kV air-gap and ±8 kV contact protection under IEC 1000-4-2, but lightning, motor transients, and sustained overvoltage require coordinated external protection. Determine whether the interface requires isolation, surge suppressors, common-mode chokes, or a chassis-ground network, and validate the complete protection scheme at the connector boundary.

Design the receiver's 5 V supply rail within the 4.75 V to 5.25 V operating range and account for noise from adjacent digital and switching circuitry. Place local supply and ground-plane connections close to the device, and avoid sharing narrow supply paths with high-current loads. Review the manufacturer data sheet for the required bypass capacitance and place those components at the specified power pins.

For RS-485 multidrop networks, calculate termination and fail-safe bias values for the actual cable length, topology, node count, and fault conditions. For RS-422 point-to-point links, evaluate termination separately at each receiver. Do not add termination automatically to every channel, because incorrect termination can reduce signal integrity or increase loading on the bus.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

The MAX3095/MAX3096 family uses IEC 1000-4-2 ESD test methods for its stated input protection. RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive-qualification status are not established by the captured product information.

Pencarian Berhubungan

MAX3095ESE/GG8 datasheet MAX3095ESE/GG8 pinout MAX3095ESE/GG8 datasheet pdf MAX3095ESE/GG8 equivalent MAX3095ESE/GG8 replacement MAX3095ESE/GG8 cross reference MAX3095ESE/GG8 vs MAX3095ESE+ MAX3095ESE/GG8 vs MAX3096ESE/GG8 MAX3095ESE/GG8 SOIC pinout MAX3095ESE/GG8 RS-485 receiver MAX3095ESE/GG8 10Mbps MAX3095ESE/GG8 price MAX3095ESE/GG8 stock Analog Devices MAX3095ESE/GG8

Komponen dan Tanda berkaitan

Analog Devices Maxim Integrated MAX3095ESE/GG8 MAX3095ESE+ MAX3095EEE+ MAX3095CEE MAX3096ESE/GG8 MAX3096ESE+ RS-422 RS-485 RS-423 differential receiver line receiver interface IC semiconductor 10 Mbps 45 mV hysteresis 4.75 V to 5.25 V supply IEC 1000-4-2 ESD protection 16-pin SOIC SOIC family surface mount industrial control bus
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ