MAX3221ECDBR - 3V-5.5V 250kbps RS-232 | Texas Instruments
MPN: MAX3221ECDBR ✓ AktifMAX3221ECDBR Ringkasan
An RS-232 transceiver is an interface IC that converts logic-level transmit and receive signals into RS-232-compatible line levels and converts incoming RS-232 signals back into logic levels. It belongs to the RS-232 interface transceiver category, connects digital controllers to serial ports, and belongs to the broader interface IC and semiconductor hierarchy. The MAX3221ECDBR integrates one driver and one receiver for a single RS-232 channel.
Its principal operating characteristics include a 3V to 5.5V supply range, a maximum data rate of 250kbps, and ±15kV IEC ESD protection. The device is specified for a 0°C to 70°C operating-temperature range and is offered in a compact 16-pin SSOP package measuring approximately 0.209 inches, or 5.30mm, wide. These characteristics make it suitable for equipment that must generate or receive RS-232 signals from a low-voltage digital system.
The MAX3221ECDBR is identified as a full RS-232 single-channel transceiver and is designed around the A/EIA-232-F interface requirements described by the manufacturer. Its integrated driver, receiver, charge-pump support components, and protection features reduce the external circuitry required around a conventional asynchronous serial controller. The 3V minimum supply operation permits use with modern 3.3V system logic without requiring a 5V-only interface rail.
Typical uses include single-port RS-232 adapters, industrial serial controllers, point-of-sale equipment, test instruments, data-acquisition systems, and embedded equipment that still uses an RS-232 physical interface. In these systems, the IC receives logic-level serial data for transmission and converts a remote RS-232 signal into a logic-level receive signal. The 250kbps capability supports substantially faster asynchronous links than legacy low-speed serial ports.
PCB design should preserve the pin assignments and decoupling recommendations in the manufacturer datasheet. Keep the charge-pump capacitor connections, driver and receiver traces, and exposed circuit paths compact, and provide suitable protection at an accessible connector because the internal ±15kV IEC ESD rating does not remove the need for an appropriate system-level surge and ESD strategy.
This page combines the verified device identity, package information, operating limits, interface characteristics, replacement candidates, and application-specific design guidance to support component selection and PCB implementation without treating the manufacturer datasheet as a substitute for careful signal-integrity and protection review.
Pilihan pengganti yang segera untuk MAX3221ECDBR — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera MAX3221ECDBR (sama faktor bentuk dan kaki) — berbeza dalam Package, Product Type, ESD Protection, Interface Standard, Maximum Data Rate.
MAX3221EIDBR
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
MAX3221IDBR
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →TRS3221ECDBR
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
TRS3221IDBR
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif rujukan (tidak dalam katalog)
SN75C3221DBR
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
MAX3221ECDBR Spesifikasi
| Product Type | Single-channel RS-232 line driver/receiver |
| Transceiver Configuration | 1/1 full RS-232 transceiver |
| Supply Voltage Range | 3 V to 5.5 V |
| Maximum Data Rate | 250kbps |
| ESD Protection | ±15kV IEC ESD |
| Gambaran Suhu Operasi | 0°C to 70°C |
| Kemasan | 16-pin SSOP (DB) |
| Package Width | 0.209 inch (5.30mm) |
| Bilangan Pin | 16 pins |
| Interface Standard | A/EIA-232-F |
| Communication Direction | Bidirectional line driver/receiver |
| Logic Compatibility | 3 V to 5.5 V supply operation |
| Jenis Pemasangan | Surface mount |
Panduan Konfigurasi Pin MAX3221ECDBR 0.209 inch (5.30mm)
Konfigurasi pin untuk MAX3221ECDBR (0.209 inch (5.30mm) pakai). Penomeran pin, fungsi, dan garis bentuk koneksi ditakrifkan dalam dokumen pengeluar. Rujuk dokumen untuk kebentuk dan pedoman pengasman.
Tiada data garisan pin yang diperoleh untuk MAX3221ECDBR.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
MAX3221ECDBR patut untuk 6 aplikasis: 3.3V Embedded RS-232 Adapter, Industrial Serial Controller, Point-of-Sale Terminal Interface, Test and Measurement Equipment, Data Acquisition and Control, RS-232 Port Expansion Module.
3.3V Embedded RS-232 Adapter
MAX3221ECDBR fits an embedded controller that generates logic-level serial data but must connect through an RS-232 port. Its 3V to 5.5V operating range permits operation from a 3.3V system rail, while the single driver and receiver provide bidirectional signal conversion in one 16-pin SSOP. The 250kbps maximum data rate supports moderate-speed asynchronous links used for configuration, diagnostics, and service consoles. Unlike a passive level shifter, the device actively generates RS-232 line levels and conditions incoming signals for the controller. The implementation should follow the manufacturer capacitor and layout guidance while keeping the serial route away from sensitive analog or clock circuitry.
Disebarkan
Industrial Serial Controller
MAX3221ECDBR is appropriate for a compact industrial controller or data-acquisition unit that must expose an RS-232 service or communication port. The 250kbps interface rate accommodates common asynchronous control protocols, and the 3V to 5.5V supply range supports modern controller logic without requiring a dedicated 5V interface rail. Its 16-pin SSOP format saves board area compared with a larger multi-channel transceiver when only one port is required. For equipment expected to operate outside 0°C to 70°C, select an industrial-temperature alternative rather than accepting reduced environmental margin. Maintain a controlled ground relationship between the controller and attached equipment because RS-232 performance depends on reference-ground quality.
Disebarkan
Point-of-Sale Terminal Interface
MAX3221ECDBR can provide the RS-232 link used by a point-of-sale terminal, receipt printer, scanner, or compact service interface. A single channel is sufficient when the system does not require simultaneous bidirectional links, and the 250kbps capability supports typical short-distance serial transactions. Its low-voltage supply range allows operation alongside 3.3V embedded logic, while the integrated driver and receiver reduce the number of external interface components. The ±15kV IEC ESD rating provides internal protection for the transceiver, but a connector-facing protection network should still be designed for the expected cable length and user-accessible environment. Verify the peripheral's logic levels and whether it requires hardware handshaking before finalizing the board.
Disebarkan
Test and Measurement Equipment
MAX3221ECDBR is useful in test and measurement equipment that requires a legacy RS-232 configuration, trigger, or service interface alongside modern digital control logic. The 250kbps data rate is suitable for command and response traffic rather than continuous high-volume transfer, and the 3V to 5.5V supply range simplifies integration with mixed-voltage instrumentation. The 16-pin SSOP package permits placement close to the connector, which can help reduce exposed trace length. Because the device has ±15kV IEC ESD protection, engineers should still evaluate connector grounding, enclosure discharge paths, and cable transients. The manufacturer's recommended charge-pump capacitor placement and layout should be reproduced to avoid converter-related disturbance on the RS-232 output.
Disebarkan
Data Acquisition and Control
MAX3221ECDBR can bridge a compact data-acquisition controller to an RS-232 instrument or programmable device. Its 250kbps maximum rate is appropriate for many legacy measurement-control protocols, while the single-channel topology reduces circuit and package overhead compared with a multi-channel transceiver. Operation from 3V to 5.5V allows the interface to share a 3.3V control rail where appropriate. Designers should account for the UART's baud-rate accuracy, command latency, and protocol timeout when estimating usable throughput. On a mixed-signal board, route the RS-232 nets away from sensitive inputs and keep the device's charge-pump section away from precision analog circuitry. For extended operating-temperature environments, choose a device explicitly rated for the required conditions.
Disebarkan
RS-232 Port Expansion Module
MAX3221ECDBR is suitable for a small expansion module that adds one RS-232 port to an embedded controller platform. Using one driver and one receiver in a 16-pin SSOP keeps the module compact while providing full RS-232 signal conversion at up to 250kbps. The 3V to 5.5V operating range supports both 3.3V and 5V system architectures, although the surrounding logic and protection components must match the selected rail. For a board intended for use across multiple temperature zones, verify the commercial 0°C to 70°C rating or specify an industrial-temperature alternative. The module should use a defined chassis or signal ground, appropriate connector retention, and an external ESD strategy if the cable can be exposed to user contact.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk MAX3221ECDBR — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | MAX3221EIDBR | MAX3221IDBR | TRS3221ECDBR | TRS3221IDBR | SN75C3221DBR |
|---|---|---|---|---|---|---|
| Package | 16-pin SSOP (DB) | 16-pin SSOP (DB) | 16-pin SSOP (DB) | 16-pin SSOP (DB) | 16-pin SSOP (DB) | 16-pin SSOP (DB) |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Pin Count | 16 pins | 16 pins | 16 pins | 16 pins | 16 pins | 16 pins |
Penyeberangsung Jelas
- Single-channel integration in a compact package (vsSN75C3221DBR)
- Directly documented pin-to-pin family option (vsTRS3221ECDBR)
- Commercial-temperature option with lower environmental rating (vsMAX3221EIDBR)
- Defined high-speed operating class (vsMAX3221IDBR)
Catatan Desain
Reproduce the Texas Instruments recommended placement for the charge-pump capacitors and place all associated components close to the designated IC pins. Keep the RS-232 driver and receiver routes away from clocks, precision analog inputs, and switching-converter power loops. Route the connector-side nets so exposed copper is minimized where practical, and provide a deliberate return path between the board ground and the connected equipment. The 16-pin SSOP footprint is compact, so soldering accessibility and correct pin-one orientation should be checked during assembly review.
Treat the RS-232 connector as an external, potentially noisy environment even though MAX3221ECDBR provides ±15kV IEC ESD protection. Use the manufacturer-specified interface network and verify whether the finished equipment requires additional connector protection for surge, cable-discharge, or repeated user-contact events. Keep the protection network close to the connector and preserve the intended ground reference. Do not rely on internal ESD protection as the only safeguard for accessible ports, and verify signaling behavior with the baud rate and cable length used by the product.
The most common integration errors are using a multi-channel transceiver when the board requires only one port, overlooking the 0°C to 70°C rating, and substituting a temperature-grade variant without checking its pinout and supply limits. The MAX3221ECDBR supports one full RS-232 channel, 3V to 5.5V operation, and up to 250kbps. Confirm the exact ordering code against the approved BOM, validate the charge-pump capacitor values and layout, and reserve a footprint-compatible alternative only after checking its operating-temperature and lifecycle requirements.
Maklumat Kesediaan
The device description identifies ±15kV IEC ESD protection, but separate RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations were not found in the available records.