MAX3221ECDBR - 3V-5.5V 250kbps RS-232 | Texas Instruments
MPN: MAX3221ECDBR ✓ Hoạt độngMAX3221ECDBR Tóm tắt
An RS-232 transceiver is an interface IC that converts logic-level transmit and receive signals into RS-232-compatible line levels and converts incoming RS-232 signals back into logic levels. It belongs to the RS-232 interface transceiver category, connects digital controllers to serial ports, and belongs to the broader interface IC and semiconductor hierarchy. The MAX3221ECDBR integrates one driver and one receiver for a single RS-232 channel.
Its principal operating characteristics include a 3V to 5.5V supply range, a maximum data rate of 250kbps, and ±15kV IEC ESD protection. The device is specified for a 0°C to 70°C operating-temperature range and is offered in a compact 16-pin SSOP package measuring approximately 0.209 inches, or 5.30mm, wide. These characteristics make it suitable for equipment that must generate or receive RS-232 signals from a low-voltage digital system.
The MAX3221ECDBR is identified as a full RS-232 single-channel transceiver and is designed around the A/EIA-232-F interface requirements described by the manufacturer. Its integrated driver, receiver, charge-pump support components, and protection features reduce the external circuitry required around a conventional asynchronous serial controller. The 3V minimum supply operation permits use with modern 3.3V system logic without requiring a 5V-only interface rail.
Typical uses include single-port RS-232 adapters, industrial serial controllers, point-of-sale equipment, test instruments, data-acquisition systems, and embedded equipment that still uses an RS-232 physical interface. In these systems, the IC receives logic-level serial data for transmission and converts a remote RS-232 signal into a logic-level receive signal. The 250kbps capability supports substantially faster asynchronous links than legacy low-speed serial ports.
PCB design should preserve the pin assignments and decoupling recommendations in the manufacturer datasheet. Keep the charge-pump capacitor connections, driver and receiver traces, and exposed circuit paths compact, and provide suitable protection at an accessible connector because the internal ±15kV IEC ESD rating does not remove the need for an appropriate system-level surge and ESD strategy.
This page combines the verified device identity, package information, operating limits, interface characteristics, replacement candidates, and application-specific design guidance to support component selection and PCB implementation without treating the manufacturer datasheet as a substitute for careful signal-integrity and protection review.
Bộ thay thế dễ dàng lắp đặt cho MAX3221ECDBR — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với MAX3221ECDBR (cùng hình factor và footprint) — khác nhau ở Package, Product Type, ESD Protection, Interface Standard, Maximum Data Rate.
MAX3221EIDBR
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
MAX3221IDBR
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →TRS3221ECDBR
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
TRS3221IDBR
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
SN75C3221DBR
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
MAX3221ECDBR Thông số kỹ thuật
| Product Type | Single-channel RS-232 line driver/receiver |
| Transceiver Configuration | 1/1 full RS-232 transceiver |
| Supply Voltage Range | 3 V to 5.5 V |
| Maximum Data Rate | 250kbps |
| ESD Protection | ±15kV IEC ESD |
| Khoảng nhiệt độ hoạt động | 0°C to 70°C |
| Hộp | 16-pin SSOP (DB) |
| Package Width | 0.209 inch (5.30mm) |
| Số lượng chân | 16 pins |
| Interface Standard | A/EIA-232-F |
| Communication Direction | Bidirectional line driver/receiver |
| Logic Compatibility | 3 V to 5.5 V supply operation |
| Kiểu lắp đặt | Surface mount |
Hướng dẫn cấu hình chân MAX3221ECDBR 0.209 inch (5.30mm)
Cấu hình chân cho MAX3221ECDBR (0.209 inch (5.30mm) gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.
Không có dữ liệu chân cụ thể sẵn có cho MAX3221ECDBR.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
MAX3221ECDBR phù hợp cho 6 Áp dụngs: 3.3V Embedded RS-232 Adapter, Industrial Serial Controller, Point-of-Sale Terminal Interface, Test and Measurement Equipment, Data Acquisition and Control, RS-232 Port Expansion Module.
3.3V Embedded RS-232 Adapter
MAX3221ECDBR fits an embedded controller that generates logic-level serial data but must connect through an RS-232 port. Its 3V to 5.5V operating range permits operation from a 3.3V system rail, while the single driver and receiver provide bidirectional signal conversion in one 16-pin SSOP. The 250kbps maximum data rate supports moderate-speed asynchronous links used for configuration, diagnostics, and service consoles. Unlike a passive level shifter, the device actively generates RS-232 line levels and conditions incoming signals for the controller. The implementation should follow the manufacturer capacitor and layout guidance while keeping the serial route away from sensitive analog or clock circuitry.
Được đề xuất
Industrial Serial Controller
MAX3221ECDBR is appropriate for a compact industrial controller or data-acquisition unit that must expose an RS-232 service or communication port. The 250kbps interface rate accommodates common asynchronous control protocols, and the 3V to 5.5V supply range supports modern controller logic without requiring a dedicated 5V interface rail. Its 16-pin SSOP format saves board area compared with a larger multi-channel transceiver when only one port is required. For equipment expected to operate outside 0°C to 70°C, select an industrial-temperature alternative rather than accepting reduced environmental margin. Maintain a controlled ground relationship between the controller and attached equipment because RS-232 performance depends on reference-ground quality.
Được đề xuất
Point-of-Sale Terminal Interface
MAX3221ECDBR can provide the RS-232 link used by a point-of-sale terminal, receipt printer, scanner, or compact service interface. A single channel is sufficient when the system does not require simultaneous bidirectional links, and the 250kbps capability supports typical short-distance serial transactions. Its low-voltage supply range allows operation alongside 3.3V embedded logic, while the integrated driver and receiver reduce the number of external interface components. The ±15kV IEC ESD rating provides internal protection for the transceiver, but a connector-facing protection network should still be designed for the expected cable length and user-accessible environment. Verify the peripheral's logic levels and whether it requires hardware handshaking before finalizing the board.
Được đề xuất
Test and Measurement Equipment
MAX3221ECDBR is useful in test and measurement equipment that requires a legacy RS-232 configuration, trigger, or service interface alongside modern digital control logic. The 250kbps data rate is suitable for command and response traffic rather than continuous high-volume transfer, and the 3V to 5.5V supply range simplifies integration with mixed-voltage instrumentation. The 16-pin SSOP package permits placement close to the connector, which can help reduce exposed trace length. Because the device has ±15kV IEC ESD protection, engineers should still evaluate connector grounding, enclosure discharge paths, and cable transients. The manufacturer's recommended charge-pump capacitor placement and layout should be reproduced to avoid converter-related disturbance on the RS-232 output.
Được đề xuất
Data Acquisition and Control
MAX3221ECDBR can bridge a compact data-acquisition controller to an RS-232 instrument or programmable device. Its 250kbps maximum rate is appropriate for many legacy measurement-control protocols, while the single-channel topology reduces circuit and package overhead compared with a multi-channel transceiver. Operation from 3V to 5.5V allows the interface to share a 3.3V control rail where appropriate. Designers should account for the UART's baud-rate accuracy, command latency, and protocol timeout when estimating usable throughput. On a mixed-signal board, route the RS-232 nets away from sensitive inputs and keep the device's charge-pump section away from precision analog circuitry. For extended operating-temperature environments, choose a device explicitly rated for the required conditions.
Được đề xuất
RS-232 Port Expansion Module
MAX3221ECDBR is suitable for a small expansion module that adds one RS-232 port to an embedded controller platform. Using one driver and one receiver in a 16-pin SSOP keeps the module compact while providing full RS-232 signal conversion at up to 250kbps. The 3V to 5.5V operating range supports both 3.3V and 5V system architectures, although the surrounding logic and protection components must match the selected rail. For a board intended for use across multiple temperature zones, verify the commercial 0°C to 70°C rating or specify an industrial-temperature alternative. The module should use a defined chassis or signal ground, appropriate connector retention, and an external ESD strategy if the cable can be exposed to user contact.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho MAX3221ECDBR — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | MAX3221EIDBR | MAX3221IDBR | TRS3221ECDBR | TRS3221IDBR | SN75C3221DBR |
|---|---|---|---|---|---|---|
| Package | 16-pin SSOP (DB) | 16-pin SSOP (DB) | 16-pin SSOP (DB) | 16-pin SSOP (DB) | 16-pin SSOP (DB) | 16-pin SSOP (DB) |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Pin Count | 16 pins | 16 pins | 16 pins | 16 pins | 16 pins | 16 pins |
Bảo phân biệt quan trọng
- Single-channel integration in a compact package (vsSN75C3221DBR)
- Directly documented pin-to-pin family option (vsTRS3221ECDBR)
- Commercial-temperature option with lower environmental rating (vsMAX3221EIDBR)
- Defined high-speed operating class (vsMAX3221IDBR)
Ghi chú thiết kế
Reproduce the Texas Instruments recommended placement for the charge-pump capacitors and place all associated components close to the designated IC pins. Keep the RS-232 driver and receiver routes away from clocks, precision analog inputs, and switching-converter power loops. Route the connector-side nets so exposed copper is minimized where practical, and provide a deliberate return path between the board ground and the connected equipment. The 16-pin SSOP footprint is compact, so soldering accessibility and correct pin-one orientation should be checked during assembly review.
Treat the RS-232 connector as an external, potentially noisy environment even though MAX3221ECDBR provides ±15kV IEC ESD protection. Use the manufacturer-specified interface network and verify whether the finished equipment requires additional connector protection for surge, cable-discharge, or repeated user-contact events. Keep the protection network close to the connector and preserve the intended ground reference. Do not rely on internal ESD protection as the only safeguard for accessible ports, and verify signaling behavior with the baud rate and cable length used by the product.
The most common integration errors are using a multi-channel transceiver when the board requires only one port, overlooking the 0°C to 70°C rating, and substituting a temperature-grade variant without checking its pinout and supply limits. The MAX3221ECDBR supports one full RS-232 channel, 3V to 5.5V operation, and up to 250kbps. Confirm the exact ordering code against the approved BOM, validate the charge-pump capacitor values and layout, and reserve a footprint-compatible alternative only after checking its operating-temperature and lifecycle requirements.
Thông tin tuân thủ
The device description identifies ±15kV IEC ESD protection, but separate RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations were not found in the available records.