Texas Instruments

MAX3221EIPWE4 - 250kbps RS-232 Transceiver | Texas Instruments

MPN: MAX3221EIPWE4 ✓ Aktif
3 V to 5.5 V Vdss 16-pin TSSOP, 4.40 mm width Package
MOQ: 1 |

MAX3221EIPWE4 Ringkasan

Texas Instruments MAX3221EIPWE4 is a single-channel RS-232 line driver and receiver operating from 3 V to 5.5 V, with a maximum data rate of 250 kbps in a 16-pin TSSOP package. The device includes a dual charge-pump circuit and provides ±15-kV ESD protection on the serial-port connection pins. Its 500 mV receiver hysteresis improves noise immunity in industrial and equipment environments.

An RS-232 transceiver is an interface integrated circuit that converts logic-level signals into RS-232-compatible levels and converts received RS-232 signals back into logic levels. The MAX3221EIPWE4 belongs to the line-driver and receiver hierarchy within RS-232 interface ICs, combining one driver, one receiver with a dedicated enable input, and the voltage-conversion charge pumps required for single-supply operation.

The principal specifications include a 3 V to 5.5 V supply range, 250 kbps maximum data rate, one driver, one receiver, and operation from -40 °C to 85 °C. The E designation provides enhanced electrostatic-discharge protection, while the 16-TSSOP package supports compact surface-mount assemblies. A 500 mV receiver hysteresis helps prevent output chatter when the received signal is close to the decision threshold.

The dual charge-pump architecture allows the interface to generate the positive and negative voltage levels required by RS-232 without a negative supply input. Charge-pump capacitors and supply bypass capacitors should be placed close to their associated pins. The serial-port pins receive the enhanced ESD protection, helping improve robustness against electrostatic discharge encountered during exposed cable connections.

Typical applications include industrial serial adapters, programmable-logic-controller communication ports, test and measurement equipment, point-of-sale terminals, and embedded control systems that require a single RS-232 channel. The dedicated receiver-enable pin supports local control of receiver output state, which can simplify interface coordination in multi-function equipment.

The primary design trade-off is operating speed versus transmission distance. A 250 kbps transceiver is appropriate for moderate-speed serial links, but long cable runs and high data rates require careful baud-rate selection, grounding, shielding, and protection-network design. Confirm the pin functions and charge-pump values in the manufacturer datasheet before finalizing the PCB.

This page organizes the manufacturer specifications, sourcing fields, drop-in replacement findings, comparison parameters, and practical RS-232 interface design guidance. It is intended to help engineers evaluate the MAX3221EIPWE4 against same-footprint alternatives while preserving signal integrity and electrostatic-discharge protection requirements.

Pilihan pengganti yang segera untuk MAX3221EIPWE4 — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

Varietas dalam siri ini

Model serupa yang kompatibel dengan pengganti yang segera MAX3221EIPWE4 (sama faktor bentuk dan kaki) — berbeza dalam Maximum Data Rate, Package, Product Type, Supply Voltage Range.

Texas Instruments
Maximum Data Rate: 250kbps
Package: 16-pin TSSOP
Product Type: Single-channel RS-232 line driver and receiver
Bandingkan Dengan MAX3221EIPWE4 →

MAX3221EIPW

✅ Masuk Drop-In
Texas Instruments
📦 16-TSSOP
Single-channel RS-232 line driver and receiver · 3V to 5.5V · 250kbps · 1 driver · 1 receiver · ±15kV · IEC 61000-4-2 · TIA/EIA-232-F

Hubungi untuk harga

Lihat Datasheet →

MAX3221IPWR

✅ Masuk Drop-In
Texas Instruments
📦 16-TSSOP
Single-channel RS-232 line driver/receiver · 1 driver · 1 receiver with dedicated enable pin · 3 V to 5.5 V · 250 kbps · ±15 kV on serial-port connection pins · TIA/EIA-232-F · Dual charge-pump circuit

Hubungi untuk harga

Lihat Datasheet →

MAX3221EIPWE4 Spesifikasi

Product Type Single-channel RS-232 line driver/receiver transceiver
Number of Drivers 1 driver
Number of Receivers 1 receiver
Supply Voltage Range 3 V to 5.5 V
Maximum Data Rate 250 kbps
Gambaran Suhu Operasi -40 °C to 85 °C
Receiver Hysteresis 500 mV
Kemasan 16-pin TSSOP, 4.40 mm width
Jenis Pemasangan Surface mount
ESD Protection, Human Body Model ±15 kV
ESD Protection, IEC Contact Discharge ±8 kV
ESD Protection, IEC Air-Gap Discharge ±15 kV
RS-232 Compliance TIA/EIA-232-F
Charge-Pump Architecture Dual charge-pump circuit
Receiver Enable Dedicated enable pin
RoHS Compliance 100% RoHS compliant
Lead-Free Status Lead free

Panduan Konfigurasi Pin MAX3221EIPWE4 16-pin tssop, 4.40 mm width

Konfigurasi pin untuk MAX3221EIPWE4 (16-pin tssop, 4.40 mm width pakai). Penomeran pin, fungsi, dan garis bentuk koneksi ditakrifkan dalam dokumen pengeluar. Rujuk dokumen untuk kebentuk dan pedoman pengasman.

Garis bentuk pengecah pakai 16-pin tssop, 4.40 mm width untuk MAX3221EIPWE4

Tiada data garisan pin yang diperoleh untuk MAX3221EIPWE4.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

MAX3221EIPWE4 patut untuk 6 aplikasis: Industrial RS-232 Control Ports, Programmable Logic Controller Communication, Test and Measurement Equipment, Point-of-Sale Terminal Interfaces, Embedded Serial Adapters, Legacy Equipment Communication.

🏭

Industrial RS-232 Control Ports

The MAX3221EIPWE4 fits single-port industrial control equipment that must translate a 3.3 V or 5 V controller into a RS-232 signal. Its 3 V to 5.5 V supply range supports both common logic rails, while the -40 °C to 85 °C rating covers demanding industrial environments. The one-driver, one-receiver arrangement is placed between the host UART and an external DB9 or terminal connector. For a 250-kbps link, the design should include the manufacturer-specified charge-pump capacitors, local supply bypassing, a solid ground reference, and cable-side transient protection where the line leaves the enclosure.

⚙️

Programmable Logic Controller Communication

The MAX3221EIPWE4 provides a compact electrical interface between a PLC UART and a legacy RS-232 programming or monitoring port. Its 250-kbps maximum rate is suitable for common low-speed controller protocols, while the dual charge pumps eliminate the need for a separate negative supply rail. The receiver's 500 mV hysteresis improves noise margin on industrial wiring. Designers should keep the interface ground close to the transceiver ground reference, use a common return path with the cable, and avoid treating the enhanced on-chip ESD ratings as a substitute for properly coordinated external surge protection.

🔧

Test and Measurement Equipment

The MAX3221EIPWE4 is appropriate for a single RS-232 service or control channel in test and measurement equipment. The 3 V to 5.5 V operating range allows use beside modern instrumentation logic, and the 250-kbps rate is adequate for many legacy configuration and diagnostic protocols. The dedicated receiver-enable pin gives the host control over when the receiver output is active, which can simplify control of a shared connector. A robust implementation follows the datasheet's charge-pump and bypass layouts and adds series impedance or surge protection for bench leads connected to long or noisy cables.

🖥️

Point-of-Sale Terminal Interfaces

The MAX3221EIPWE4 can interface a point-of-sale terminal or peripheral that still uses RS-232 for receipt printers, scanners, or service connectors. Its 250-kbps data rate covers typical peripheral traffic, while operation from 3.3 V reduces the power-supply burden in compact equipment. The 16-TSSOP package preserves PCB area compared with larger RS-232 implementations. Because peripherals often use long or externally routed cables, the connector side should include coordinated overvoltage and surge protection, while signal-ground continuity must be maintained to avoid receiver errors.

🧩

Embedded Serial Adapters

The MAX3221EIPWE4 suits compact embedded systems that must add one RS-232 port to a 3.3 V processor, microcontroller, or programmable logic controller. Its dual charge-pump design converts a single positive supply into the bipolar RS-232 levels, reducing external power complexity. The device operates at up to 250 kbps and provides a dedicated receiver-enable control for host-managed signaling. Board implementation should reserve the required charge-pump and bypass capacitor positions, maintain short return paths, and use a protected connector when the adapter is used as a field-accessible peripheral.

🔌

Legacy Equipment Communication

The MAX3221EIPWE4 allows modern control electronics to communicate with legacy RS-232 equipment while retaining a compact surface-mount implementation. Its 250-kbps rate supports many configuration, status, and command links, and its 500 mV receiver hysteresis helps reject noise around the input transition region. For reliable integration, use the manufacturer's recommended charge-pump capacitance and power-bypass arrangement, connect the cable shield according to the enclosure strategy, and confirm that the legacy equipment's ground and voltage levels do not require isolation. A dedicated receiver-enable signal may also be useful for port-sharing behavior.

What is the operating voltage range of MAX3221EIPWE4?
The MAX3221EIPWE4 operates from 3 V to 5.5 V. According to the Texas Instruments MAX3221 datasheet, the device is a single-supply RS-232 line driver and receiver, allowing operation from regulated 3.3 V or 5 V rails without a separate negative supply input. Its dual charge-pump circuit generates the bipolar voltage levels needed by RS-232, while the supply pins still require the local bypass and charge-pump capacitors described in the manufacturer application guidance.
What is the maximum data rate of MAX3221EIPWE4?
The MAX3221EIPWE4 supports a maximum data rate of 250 kbps. Texas Instruments identifies the device as a 3 V to 5.5 V, single-channel RS-232 transceiver with one driver and one receiver. This speed is suitable for many control, instrumentation, and legacy serial-port links, although cable length, baud rate, grounding, shielding, and transient protection remain important parts of the channel design. Longer cables generally require lower signaling rates.
Where can I download the MAX3221EIPWE4 datasheet PDF?
The official MAX3221EIPWE4 datasheet PDF is available from Texas Instruments at https://www.ti.com/lit/ds/symlink/max3221.pdf. The document contains the device description, electrical characteristics, RS-232 pin information, charge-pump capacitor requirements, and application guidance. Use the manufacturer document as the controlling reference for PCB pin assignments and external component values, and select the MAX3221EIPWE4 ordering variant for the required temperature range and package.
Where can I find the MAX3221EIPWE4 pinout?
The MAX3221EIPWE4 pinout is shown in the pin-configuration section of the Texas Instruments MAX3221 datasheet. The exact numbered pin names and descriptions are not reproduced on this page because the available source text does not provide a complete pin table. Before laying out a board, use the datasheet's 16-pin TSSOP diagram to assign the supply, ground, driver, receiver, enable, and charge-pump connections and to confirm the exposed pad requirements.
What ESD protection does MAX3221EIPWE4 provide?
The MAX3221EIPWE4 provides ±15-kV human-body-model protection and ±15-kV IEC air-gap discharge protection on the serial-port connection pins. The specified IEC contact-discharge level is ±8 kV. According to the Texas Instruments datasheet description, the protection applies pin-to-pin on the RS-232 serial-port connections, including ground. External surge or cable transient protection may still be appropriate where the connected cable is longer or exposed to severe industrial environments.
Where can I buy MAX3221EIPWE4 and what is its price?
Use the Request a Quote form on this page to request MAX3221EIPWE4 pricing, current availability, and order quantity. The structured price panel reflects qualifying quantity-break data when a listing for the exact MPN is available, while quote-first requests cover changing demand and supply conditions. For production planning, include the 16-TSSOP package, operating-temperature range, and reel or other approved packing option in your written request.
What is the lead time for MAX3221EIPWE4?
The current lead time and minimum order quantity should be confirmed through the Request a Quote form on this page. Lead time can change with supplier inventory, production schedules, and the selected package or packing option. Engineers should request the exact MPN MAX3221EIPWE4 rather than a generic MAX3221 family designation, and should also confirm whether multiple reels or partial quantities are acceptable for the production plan.
Is MAX3221EIPWE4 in stock?
Current stock status for MAX3221EIPWE4 should be confirmed through the Request a Quote form on this page. The offer status shown in structured product data uses back-order availability unless a listing explicitly establishes in-stock inventory. For schedule-critical builds, request quantity, target date, approved packing method, and traceability requirements so the supply response can be evaluated against the assembly schedule.
What can replace MAX3221EIPWE4?
The MAX3221EIPW is the closest same-brand drop-in candidate identified for the MAX3221EIPWE4 because it uses the same 16-pin TSSOP format and the same RS-232 transceiver function. The MAX3221IPWR is another same-footprint option identified by cross-reference data, although its supply and temperature details differ. Confirm the complete pin table, temperature grade, supply range, charge-pump values, and lifecycle status in the manufacturer datasheet before approving either substitution.
Is MAX3221EIPWE4 the same as MAX3221EIPW?
The MAX3221EIPW is closely related to the MAX3221EIPWE4 and is identified as a compatible replacement in cross-reference information. Both are 250-kbps, single-channel RS-232 transceivers associated with the same 16-pin TSSOP family. The exact orderable temperature grade, supply range, and packing designation must still be checked because those suffixes can change commercial or environmental requirements even when the PCB land pattern remains unchanged.
MAX3221EIPWE4 vs MAX3221IPWR - which is better?
The MAX3221EIPWE4 is preferable when the design requires the stated 3 V to 5.5 V supply range, -40 °C to 85 °C operation, and enhanced ESD-protection positioning. The MAX3221IPWR is a same-package alternative identified by cross-reference information and is listed with a 4.5 V to 5.5 V supply range in that comparison. Choose the latter only after checking its temperature grade, receiver and driver thresholds, enable behavior, charge-pump values, and production lifecycle.
When should I choose MAX3221EIPWE4 over MAX3232IPWR?
Choose MAX3221EIPWE4 when the system needs only one RS-232 driver and one receiver and its 250-kbps, 3 V to 5.5 V implementation matches the channel requirements. The MAX3232IPWR is a different transceiver configuration and should not be treated as an automatic drop-in replacement without a pin-by-pin and function-level review. It may be relevant when a two-channel RS-232 solution is desired, but it can change board area, power behavior, and signal routing.
Is MAX3221EIPWE4 suitable for industrial serial communication?
The MAX3221EIPWE4 is suitable for many industrial serial links because it supports 3 V to 5.5 V operation, -40 °C to 85 °C temperature, 500 mV receiver hysteresis, and enhanced ESD protection. Industrial suitability also depends on cable length, baud rate, grounding, isolation, surge exposure, and enclosure behavior. Use the device within the manufacturer electrical limits and add appropriately coordinated cable-side protection when the interface leaves the enclosure.
What are the key specifications engineers should know about MAX3221EIPWE4?
The key MAX3221EIPWE4 specifications are a 3 V to 5.5 V supply, 250-kbps maximum data rate, one driver, one receiver, 500 mV receiver hysteresis, and a -40 °C to 85 °C operating range. The device uses a 16-pin TSSOP package and a dual charge-pump architecture. Its serial-port pins are specified for ±15-kV human-body-model and IEC air-gap discharge protection, with ±8-kV IEC contact-discharge protection.
What is the best equivalent RS-232 transceiver for MAX3221EIPWE4?
The best directly supported equivalent family candidate is the MAX3221EIPW from Texas Instruments because cross-reference information identifies it as a compatible replacement in the same 16-pin TSSOP format. The MAX3221IPWR is another same-footprint alternative, but its 4.5 V to 5.5 V supply range can prevent substitution in 3.3 V designs. No verified cross-manufacturer equivalent was established, so a different supplier should not be called drop-in without a documented pin and parameter comparison.

Data referensi kejuruteraan untuk MAX3221EIPWE4 — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose MAX3221EIPWE4 for a compact RS-232 port that operates from 3.3 V or 5 V and requires a documented -40 °C to 85 °C operating range. Its 250-kbps limit, one-driver/one-receiver configuration, dual charge pumps, and enhanced serial-port ESD ratings make it appropriate for many embedded, industrial, test, and legacy-equipment links. Choose MAX3221EIPW when the manufacturer confirms that its exact ordering codes satisfy the required temperature grade and packing while preserving the same 16-TSSOP footprint. Choose MAX3221IPWR only for 5 V systems because its listed 4.5 V to 5.5 V supply range excludes a 3.3 V rail. A different-manufacturer device should be selected only after its pinout, supply range, data rate, charge-pump requirements, receiver thresholds, ESD ratings, and lifecycle status have all been verified.

Perbandingan dengan Gantian

Parametr Produk Ini MAX3221EIPW MAX3221IPWR
Package 16-TSSOP 16-TSSOP 16-TSSOP
Brand Texas Instruments Texas Instruments Texas Instruments
Transceiver Configuration 1 driver / 1 receiver 1 driver / 1 receiver 1 driver / 1 receiver
Maximum Data Rate 250 kbps 250 kbps 250 kbps
RS-232 Standard TIA/EIA-232-F RS-232 line driver/receiver RS-232 line driver/receiver

Penyeberangsung Jelas

  • Lower minimum supply voltage (vsMAX3221IPWR)
  • Specified industrial temperature range (vsMAX3221EIPW)
  • Enhanced serial-port ESD ratings (vsMAX3221IPWR)
  • Same-footprint upgrade path (vsMAX3221EIPW)

Catatan Desain

Place the charge-pump capacitors and local supply-bypass capacitors close to their specified pins, using the shortest practical ground-return paths. The MAX3221 generates bipolar RS-232 levels through charge pumps, so long capacitor traces and high-resistance ground connections can degrade signal timing and increase emissions. Follow the manufacturer datasheet layout and component values, and keep the serial connector and analog or high-speed circuitry physically separated to minimize coupling.

Do not substitute a nominal 5 V RS-232 transceiver in a 3.3 V design without confirming its minimum supply voltage. The MAX3221EIPWE4 operates from 3 V to 5.5 V, while the MAX3221IPWR is listed with a 4.5 V to 5.5 V range. Also verify the receiver-enable polarity and the complete 16-pin TSSOP pinout before substituting a related orderable code; a matching package outline alone does not guarantee identical environmental or commercial suffixes.

Use the 500 mV receiver hysteresis to improve rejection of noise near the receiver threshold, but also control the physical cable path. Maintain a continuous signal-ground return, use suitable twisted-pair cabling for exposed RS-232 links, and terminate or protect connector pins according to the installation's surge environment. At 250 kbps, edge quality and ground bounce become increasingly important as cable length and data rate increase.

Keep the RS-232 connector and charge-pump region away from clocks, switching supplies, ADC inputs, and sensitive analog nodes. Maintain a compact high-frequency return path and observe the datasheet's component-placement guidance to limit charge-pump ripple from coupling into adjacent circuitry. If the interface drives a long cable, combine correct grounding with connector-side surge protection rather than relying only on the transceiver's integrated ESD capability.

Maklumat Kesediaan

RoHS
Compliant
REACH
Unknown
AEC-Q100
Unknown
Bosong logam timbal
Yes
Bosong halogen
Unknown
Mineral konflik
Unknown

The product listing identifies the MAX3221EIPWE4 as 100% RoHS compliant and lead free. No explicit REACH, AEC-Q100, halogen-free, or conflict-minerals status was identified for this exact orderable MPN.

Data disahkan pada: 2026-11-09 — data yang disahkan dan disusun semula oleh pasukan kejuruteraan komponen XAIPART

Pencarian Berhubungan

MAX3221EIPWE4 datasheet MAX3221EIPWE4 datasheet pdf MAX3221EIPWE4 pinout MAX3221EIPWE4 equivalent MAX3221EIPWE4 replacement MAX3221EIPWE4 vs MAX3221EIPW MAX3221EIPWE4 vs MAX3221IPWR MAX3221EIPWE4 price MAX3221EIPWE4 stock Texas Instruments MAX3221EIPWE4 MAX3221EIPWE4 application circuit MAX3221EIPWE4 TSSOP-16 footprint MAX3221EIPWE4 250kbps RS-232

Komponen dan Tanda berkaitan

Texas Instruments MAX3221EIPWE4 MAX3221EIPW MAX3221IPWR RS-232 transceiver line driver line receiver interface IC TIA/EIA-232-F charge-pump circuit dual charge pump 250 kbps 3 V to 5.5 V 500 mV receiver hysteresis 16-pin TSSOP TSSOP package family surface mount SMD ESD protection IEC 61000-4-2 industrial communication programmable logic controller test and measurement embedded serial adapter RoHS
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ