Analog Devices

MAX3232ECUP+TG071 - 3V Dual RS-232 | Analog Devices

MPN: MAX3232ECUP+TG071 ✓ Aktif
3.0 V to 5.5 V Vdss 10 nA Id 20-pin TSSOP Package
MOQ: 1 |

MAX3232ECUP+TG071 Ringkasan

The Analog Devices MAX3232ECUP+TG071 is a dual-transmitter, dual-receiver RS-232 interface transceiver operating from 3.0 V to 5.5 V, with a listed data rate of 250 kbps, in a 20-pin TSSOP package. It is designed for bidirectional serial-port conversion between RS-232 logic levels and CMOS/TTL signals. The device also supports operation up to 1 Mbps, provides ±15 kV ESD protection, and features a low-power shutdown current down to 10 nA.

An RS-232 transceiver is an interface IC that bridges the voltage-domain difference between a modern digital system and an RS-232 port. It converts low-voltage digital transmitter and receiver signals into RS-232-compatible levels in one direction and translates incoming RS-232 levels back into logic-compatible signals in the other. Within the signal-chain hierarchy, the MAX3232ECUP+TG071 belongs to the RS-232 transceiver class, interface IC category, and broader semiconductor product family.

The MAX3232ECUP+TG071 integrates two transmitters and two receivers, allowing two communication channels to share one package. Its 3.0 V to 5.5 V supply range supports both 3.3 V and 5 V system rails. The ±15 kV ESD protection improves resilience when a cable-connected port is exposed to electrostatic discharge, while the low 10 nA power-down current is useful for portable or intermittently powered equipment.

True RS-232 operation requires a charge-pump circuit to generate the positive and negative voltages required by the RS-232 specification. The MAX3232ECUP+TG071 integrates this function with the drivers and receivers, reducing external component count compared with discrete implementations. Its dual-channel architecture also supports hardware flow-control signals when additional receiver or transmitter channels are required by the host interface.

Typical uses include industrial serial adapters, POS terminals, test equipment, data acquisition systems, embedded control panels, and service interfaces. A 3.3 V controller can use the device for a 2/2 RS-232 channel implementation, while a 5 V system can operate within the same supported supply range. The 20-pin TSSOP footprint supports compact, surface-mount PCB construction.

For reliable implementation, place the charge-pump capacitors and transceiver interface components close to their associated pins, route the RS-232 traces away from sensitive analog or high-speed digital paths, and connect the ground reference as specified in the manufacturer datasheet. Verify the complete external capacitor network against the device's recommended circuit before layout release.

This product page consolidates the electrical ratings, package information, drop-in comparison options, application guidance, and practical design considerations needed to evaluate the MAX3232ECUP+TG071 for a new RS-232 interface.

Pilihan pengganti yang segera untuk MAX3232ECUP+TG071 — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

MAX3222EIPWR

✅ Masuk Drop-In
📦 20-pin TSSOP
Shutdown supply current is 1 µA versus 10 nA for the MAX3232ECUP+TG071, a 100× increase, while receivers remain active during shutdown.

📋 Alternatif rujukan (tidak dalam katalog)

MAX3222ECUP+TG071

✅ Masuk Drop-In
📦 20-pin TSSOP
Shutdown supply current is 1 µA versus 10 nA, a 100× increase, and the receivers remain active during shutdown.

📋 Alternatif rujukan (tidak dalam katalog)

MAX3222EUA+TG071

✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 20-pin TSSOP
The key shutdown-mode difference is 1 µA versus 10 nA, a 100× increase, with active receivers during shutdown.

📋 Alternatif rujukan (tidak dalam katalog)

MAX3232EUA+TG071

✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 20-pin TSSOP
Core 2/2 RS-232 channels, 3.0 V to 5.5 V supply range, and 20-pin TSSOP construction are retained; the difference is the manufacturer ordering code.

📋 Alternatif rujukan (tidak dalam katalog)

SN75C3222EPWR

✅ Masuk Drop-In
📦 20-pin TSSOP
The candidate retains a dual-transmitter, dual-receiver RS-232 configuration in a 20-pin TSSOP package; shutdown current and ESD-rating differences require verification.

📋 Alternatif rujukan (tidak dalam katalog)

MAX3232ECUP+TG071 Spesifikasi

Transmitter Count 2
Receiver Count 2
Supply Voltage Range 3.0 V to 5.5 V
Listed Data Rate 250 kbps
Maximum Data Rate 1 Mbps
ESD Protection ±15 kV
Power-Down Current 10 nA
Interface Standard RS-232
Transceiver Configuration 2/2 full-duplex
Kemasan 20-pin TSSOP
Jenis Pemasangan Surface mount
Moisture Sensitivity Level MSL 1
Peak Reflow Temperature 260 °C
Maximum Peak Reflow Time 30 s
Terminal Finish Matte tin
JESD-609 Code e3

Panduan Konfigurasi Pin MAX3232ECUP+TG071 20-pin tssop

Konfigurasi pin untuk MAX3232ECUP+TG071 (20-pin tssop pakai). Penomeran pin, fungsi, dan garis bentuk koneksi ditakrifkan dalam dokumen pengeluar. Rujuk dokumen untuk kebentuk dan pedoman pengasman.

Garis bentuk pengecah pakai 20-pin tssop untuk MAX3232ECUP+TG071

Tiada data garisan pin yang diperoleh untuk MAX3232ECUP+TG071.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

MAX3232ECUP+TG071 patut untuk 6 aplikasis: Industrial Serial Port Adapter, Point-of-Sale Terminal Interface, Test and Measurement Control Port, Embedded Data Acquisition Unit, Portable Service and Diagnostic Interface, Legacy Equipment Control Panel.

🏭

Industrial Serial Port Adapter

The MAX3232ECUP+TG071 fits industrial serial adapters that must translate between a 3.3 V or 5 V controller and an RS-232 equipment port. Its two transmitters and two receivers support two communication channels, while the 3.0 V to 5.5 V supply range simplifies operation across different embedded platforms. The listed 250 kbps rate and capability up to 1 Mbps cover configuration downloads, status polling, and short command exchanges. ±15 kV ESD protection adds useful resilience for a cable-connected industrial port, although the enclosure, grounding, and signal-routing strategy must still be engineered for the installation environment.

🖥️

Point-of-Sale Terminal Interface

The MAX3232ECUP+TG071 is suitable for a point-of-sale terminal that connects a low-voltage processor to a service port, printer interface, or diagnostic connector. The integrated 2/2 transceiver arrangement reduces the number of external interface ICs while supporting two RS-232 paths in a compact 20-pin TSSOP package. Its 3.0 V to 5.5 V operating range permits use with either 3.3 V or 5 V logic domains. ESD protection rated to ±15 kV is valuable around user-accessible cables, while the low shutdown current down to 10 nA helps limit standby demand in intermittently powered retail equipment.

🔧

Test and Measurement Control Port

The MAX3232ECUP+TG071 can provide a compact control interface in test equipment, programmable instruments, and laboratory automation systems. Two RS-232 channels can carry commands and status independently, while the transceiver's listed 250 kbps rate and capability up to 1 Mbps support common serial-control protocols. The 3.0 V to 5.5 V supply range allows integration beside modern FPGA, microcontroller, or embedded-computing rails. For bench equipment, place the charge-pump network close to the device and keep external cables away from sensitive measurement circuitry to prevent cable transients and ground-current effects from degrading accuracy.

📡

Embedded Data Acquisition Unit

The MAX3232ECUP+TG071 is appropriate for data-acquisition units that expose configuration or telemetry through RS-232. Its 2/2 channel arrangement allows one path for host commands and another for synchronized status or diagnostic data, reducing the need for additional transceivers in a 20-pin TSSOP footprint. Operation from 3.0 V to 5.5 V suits compact controller boards, and the power-down current down to 10 nA is beneficial when the acquisition unit spends extended periods between measurement sessions. Ensure the external charge-pump capacitors meet the manufacturer's recommended values and route the transceiver ground carefully to minimize coupling into analog acquisition channels.

📱

Portable Service and Diagnostic Interface

The MAX3232ECUP+TG071 supports portable diagnostic equipment that communicates with service ports through short RS-232 links. A 3.0 V minimum supply voltage allows operation from efficient 3.3 V power systems, while the 20-pin TSSOP package limits board area in compact handheld designs. The device provides two transmitters, two receivers, and ±15 kV ESD protection for a connector that may be handled during field service. Its shutdown current down to 10 nA is useful when the unit powers down between service sessions. Firmware should still control shutdown deliberately and wake reliably when a connected host resumes communication.

⚡

Legacy Equipment Control Panel

The MAX3232ECUP+TG071 can bridge a modern control panel and legacy RS-232 equipment that requires true RS-232 voltage levels. The integrated charge-pump circuitry generates the required bipolar signal levels, avoiding the external pump network that discrete driver designs may require. Two transmitters and two receivers permit command and feedback paths in one package, and the 3.0 V to 5.5 V range supports common industrial control voltages. During PCB layout, use the manufacturer reference network, maintain the specified capacitor types and values, and separate cable-side routing from logic-side traces to minimize switching transients and ground bounce.

What is the operating voltage of MAX3232ECUP+TG071?
The MAX3232ECUP+TG071 operates from 3.0 V to 5.5 V. According to the manufacturer datasheet, this range supports both 3.3 V and 5 V systems while allowing the same RS-232 transceiver circuit to operate from either rail voltage. The device is specified with ±15 kV ESD protection, a listed rate of 250 kbps, and operation up to 1 Mbps.
What are the key specifications of MAX3232ECUP+TG071 that engineers should know?
The MAX3232ECUP+TG071 is a 2-transmitter, 2-receiver RS-232 transceiver with a 3.0 V to 5.5 V supply range, a listed 250 kbps data rate, and operation up to 1 Mbps. According to the manufacturer datasheet, it also provides ±15 kV ESD protection and a power-down current down to 10 nA, all in a 20-pin TSSOP package.
Where can I download the MAX3232ECUP+TG071 datasheet PDF?
The MAX3232ECUP+TG071 datasheet PDF is available from the product data sources linked on this page. According to the manufacturer documentation, it describes the 2/2 RS-232 architecture, 3.0 V to 5.5 V operation, ±15 kV ESD protection, charge-pump circuitry, recommended external capacitors, and the 20-pin TSSOP connection arrangement.
Where can I find the MAX3232ECUP+TG071 pinout?
Use the pin-description table and package drawing in the manufacturer datasheet to identify every MAX3232ECUP+TG071 connection. The device is a 20-pin TSSOP with two transmitters, two receivers, charge-pump components, supply pins, enable or shutdown control, and ground connections. Follow the numbered package drawing directly when assigning PCB tracks.
Is MAX3232ECUP+TG071 suitable for a 3.3 V serial interface?
Yes, the MAX3232ECUP+TG071 is suitable for a 3.3 V serial interface because its specified supply range is 3.0 V to 5.5 V. According to the manufacturer datasheet, the device operates up to 1 Mbps and includes ±15 kV ESD protection. The host logic and transceiver share the appropriate supply arrangement described in the recommended application circuit.
What can replace the MAX3232ECUP+TG071?
The closest replacements include the MAX3222E family in the same 20-pin TSSOP format and the SN75C3222EPWR. Pin compatibility must be checked carefully because some related devices change the shutdown behavior or available receiver and transmitter functions. The manufacturer states that MAX3222E and MAX3232E are pin-, package-, and functionally compatible with legacy MAX242 and MAX232 devices.
Is MAX3232ECUP+TG071 the same as MAX3222ECUP+TG071?
No, the MAX3232ECUP+TG071 and MAX3222ECUP+TG071 are closely related but not functionally identical. According to the manufacturer family documentation, the MAX3222E has a 1 µA shutdown mode with active receivers for monitoring, whereas the MAX3232E family supports power-down current down to 10 nA. Verify shutdown behavior and external connections before substituting one for the other.
MAX3232ECUP+TG071 vs MAX3222EIPWR - which is better for a low-power RS-232 port?
Choose the MAX3232ECUP+TG071 when minimum power-down consumption is the priority, and choose the MAX3222EIPWR when monitoring external devices during shutdown is required. According to the manufacturer family documentation, the MAX3222E shutdown supply current is 1 µA and its receivers remain active, while the MAX3232E family reaches power-down current down to 10 nA.
What is the best Texas Instruments equivalent for MAX3232ECUP+TG071?
A Texas Instruments RS-232 transceiver should be selected only after its exact package, pinout, supply voltage, channel count, and shutdown behavior are verified. The MAX3232ECUP+TG071 is a 2/2, 3.0 V to 5.5 V device in a 20-pin TSSOP package with ±15 kV ESD protection. A candidate with a different channel arrangement or package would require a board-level qualification rather than a blind substitution.
When should I choose MAX3232ECUP+TG071 over MAX3222EIPWR?
Choose the MAX3232ECUP+TG071 when battery-operated equipment benefits from its power-down current down to 10 nA and active monitoring during shutdown is unnecessary. Choose the MAX3222EIPWR when its 1 µA shutdown mode and receivers that remain active better support peripheral monitoring. Both families use RS-232 transceivers, but their shutdown behavior differs.
Can SN75C3222EPWR replace MAX3232ECUP+TG071?
SN75C3222EPWR is a candidate for evaluation as a 20-pin TSSOP RS-232 transceiver, but it must be qualified against the target design rather than assumed to be interchangeable. According to the manufacturer datasheet for the MAX3232ECUP+TG071, important checks include the 2/2 channel arrangement, 3.0 V to 5.5 V supply range, shutdown function, charge-pump capacitors, and ESD requirements.
Where can I buy MAX3232ECUP+TG071 online?
Use the Request a Quote form on this page to request MAX3232ECUP+TG071 availability, current commercial terms, and suitable packaging. The form supports direct sourcing without relying on static price text. The requested part should be identified by its complete MPN, MAX3232ECUP+TG071, to avoid confusion with related MAX3232E variants.
What is the price of MAX3232ECUP+TG071?
Current pricing for MAX3232ECUP+TG071 is obtained through the Request a Quote form on this page. Commercial terms can vary with order quantity, package configuration, and supply status. Submit the complete MPN and required quantity to receive a current quotation rather than relying on a stale price table.
What is the lead time for MAX3232ECUP+TG071?
The current lead time for MAX3232ECUP+TG071 should be confirmed through the Request a Quote form on this page. Include the required quantity, date code preference, and destination to obtain an actionable supply commitment. The part is identified in a 20-pin TSSOP package, so the quote should also confirm the intended shipping configuration.
Is MAX3232ECUP+TG071 in stock?
Use the Request a Quote form on this page to check current stock and allocation status for MAX3232ECUP+TG071. Stock can change with supplier inventory and order volume, so a live response is more useful than a static availability statement. Provide the complete MPN and required quantity with your request.

Data referensi kejuruteraan untuk MAX3232ECUP+TG071 — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose the MAX3232ECUP+TG071 for compact, low-power RS-232 interfaces where two transmit and two receive channels are required, the system operates from 3.3 V or 5 V, and minimum shutdown consumption is important. Its 20-pin TSSOP package also fits the MAX3222E footprint family, but shutdown behavior must be checked before interchange. Select a MAX3222EIPWR or MAX3222ECUP+TG071 instead when receivers must remain active during shutdown so the equipment can monitor a connected peripheral; their stated shutdown current is 1 µA, 100 times higher than the MAX3232ECUP+TG071. A MAX3222EUA+TG071 is another same-family option for industrial temperature requirements, while MAX3232EUA+TG071 retains the core MAX3232E behavior. Consider the SN75C3222EPWR as a cross-brand evaluation candidate in the same 20-pin TSSOP format, but verify its supply range, shutdown current, ESD rating, and exact pin behavior before approving a substitution.

Perbandingan dengan Gantian

Parametr Produk Ini MAX3222EIPWR MAX3222ECUP+TG071 MAX3222EUA+TG071 MAX3232EUA+TG071 SN75C3222EPWR
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Texas Instruments
Package 20-pin TSSOP 20-pin TSSOP 20-pin TSSOP 20-pin TSSOP 20-pin TSSOP 20-pin TSSOP
Transmitter / Receiver Configuration 2/2 2/2 2/2 2/2 2/2 2/2

Penyeberangsung Jelas

  • Lower shutdown consumption (vsMAX3222EIPWR)
  • Two RS-232 channels in one package (vsSN75C3222EPWR)
  • Defined protection and operating limits (vsMAX3222EUA+TG071)

Catatan Desain

Place the charge-pump capacitors and the transceiver's required interface capacitors directly beside their associated pins. Keep the external capacitor network compact and follow the manufacturer reference layout because long charge-pump traces can increase radiated noise and reduce effective surge margin. Route the RS-232 connector-side traces separately from precision analog inputs and high-speed clock or data nets.

Do not substitute a MAX3222E device without checking shutdown behavior. According to the manufacturer family documentation, MAX3222E variants consume about 1 µA in shutdown and keep their receivers active, while MAX3232E variants support power-down current down to 10 nA. The 100× difference can affect battery life, and active receivers may create a logic-state transition when the host resumes communication.

The integrated charge-pump circuit can introduce periodic switching energy onto the power rail. Place local supply bypass capacitance at the device, maintain the shortest practical connection to the charge-pump capacitor network, and observe the intended shutdown state during sensitive measurements. If the transceiver shares a board with analog circuitry, consider isolating or filtering the supply rail before it reaches high-impedance front ends.

Treat the connector side and logic side of the interface as separate routing regions. Connect the transceiver ground and chassis or signal ground using the topology recommended in the application circuit, and keep long cable routes away from sensitive circuitry. Validate the finished board with ESD, conducted-emissions, and communication-integrity testing because the device's ±15 kV ESD rating does not replace a compliant connector and enclosure design.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

The manufacturer documentation identifies JESD-609 code e3, MSL 1, matte-tin terminal finish, a 260 °C peak reflow temperature, and a 30-second maximum peak-reflow time. RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status require confirmation from the current manufacturer declaration or product documentation.

Data disahkan pada: 2026-11-09 — data yang disahkan dan disusun semula oleh pasukan kejuruteraan komponen XAIPART

Pencarian Berhubungan

MAX3232ECUP+TG071 datasheet MAX3232ECUP+TG071 pinout MAX3232ECUP+TG071 datasheet pdf MAX3232ECUP+TG071 equivalent MAX3232ECUP+TG071 replacement MAX3232ECUP+TG071 cross reference MAX3232ECUP+TG071 vs MAX3222EIPWR MAX3232ECUP+TG071 price MAX3232ECUP+TG071 stock Analog Devices MAX3232ECUP+TG071 MAX3232ECUP 20-TSSOP pinout MAX3232ECUP RS-232 application circuit

Komponen dan Tanda berkaitan

Analog Devices MAX3232ECUP+TG071 MAX3232E MAX3222E MAX3222EIPWR MAX3222ECUP+TG071 MAX3222EUA+TG071 MAX3232EUA+TG071 SN75C3222EPWR RS-232 RS-232 transceiver interface IC CMOS TTL charge-pump circuit ESD protection power-down current data rate TSSOP-20 surface-mount package industrial serial adapter point-of-sale terminal data acquisition JESD-609
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ