MAX3232ECUP+TG071 - 3V Dual RS-232 | Analog Devices
料号: MAX3232ECUP+TG071 ✓ 量产中MAX3232ECUP+TG071 概述
An RS-232 transceiver is an interface IC that bridges the voltage-domain difference between a modern digital system and an RS-232 port. It converts low-voltage digital transmitter and receiver signals into RS-232-compatible levels in one direction and translates incoming RS-232 levels back into logic-compatible signals in the other. Within the signal-chain hierarchy, the MAX3232ECUP+TG071 belongs to the RS-232 transceiver class, interface IC category, and broader semiconductor product family.
The MAX3232ECUP+TG071 integrates two transmitters and two receivers, allowing two communication channels to share one package. Its 3.0 V to 5.5 V supply range supports both 3.3 V and 5 V system rails. The ±15 kV ESD protection improves resilience when a cable-connected port is exposed to electrostatic discharge, while the low 10 nA power-down current is useful for portable or intermittently powered equipment.
True RS-232 operation requires a charge-pump circuit to generate the positive and negative voltages required by the RS-232 specification. The MAX3232ECUP+TG071 integrates this function with the drivers and receivers, reducing external component count compared with discrete implementations. Its dual-channel architecture also supports hardware flow-control signals when additional receiver or transmitter channels are required by the host interface.
Typical uses include industrial serial adapters, POS terminals, test equipment, data acquisition systems, embedded control panels, and service interfaces. A 3.3 V controller can use the device for a 2/2 RS-232 channel implementation, while a 5 V system can operate within the same supported supply range. The 20-pin TSSOP footprint supports compact, surface-mount PCB construction.
For reliable implementation, place the charge-pump capacitors and transceiver interface components close to their associated pins, route the RS-232 traces away from sensitive analog or high-speed digital paths, and connect the ground reference as specified in the manufacturer datasheet. Verify the complete external capacitor network against the device's recommended circuit before layout release.
This product page consolidates the electrical ratings, package information, drop-in comparison options, application guidance, and practical design considerations needed to evaluate the MAX3232ECUP+TG071 for a new RS-232 interface.
直接替换替代料: MAX3232ECUP+TG071 ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
MAX3222EIPWR
✅ 直接替换📋 参考替代料(不在目录中)
MAX3222ECUP+TG071
✅ 直接替换📋 参考替代料(不在目录中)
MAX3222EUA+TG071
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
MAX3232EUA+TG071
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
SN75C3222EPWR
✅ 直接替换📋 参考替代料(不在目录中)
MAX3232ECUP+TG071 规格参数
| Transmitter Count | 2 |
| Receiver Count | 2 |
| Supply Voltage Range | 3.0 V to 5.5 V |
| Listed Data Rate | 250 kbps |
| Maximum Data Rate | 1 Mbps |
| ESD Protection | ±15 kV |
| Power-Down Current | 10 nA |
| Interface Standard | RS-232 |
| Transceiver Configuration | 2/2 full-duplex |
| 封装 | 20-pin TSSOP |
| 安装类型 | Surface mount |
| Moisture Sensitivity Level | MSL 1 |
| Peak Reflow Temperature | 260 °C |
| Maximum Peak Reflow Time | 30 s |
| Terminal Finish | Matte tin |
| JESD-609 Code | e3 |
MAX3232ECUP+TG071 20-pin tssop 引脚配置指南
MAX3232ECUP+TG071(20-pin tssop 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。
暂无详细引脚数据: MAX3232ECUP+TG071.
请参阅 数据手册 以查看完整引脚配置。
典型应用
MAX3232ECUP+TG071 适用于 6 应用s: Industrial Serial Port Adapter, Point-of-Sale Terminal Interface, Test and Measurement Control Port, Embedded Data Acquisition Unit, Portable Service and Diagnostic Interface, Legacy Equipment Control Panel.
Industrial Serial Port Adapter
The MAX3232ECUP+TG071 fits industrial serial adapters that must translate between a 3.3 V or 5 V controller and an RS-232 equipment port. Its two transmitters and two receivers support two communication channels, while the 3.0 V to 5.5 V supply range simplifies operation across different embedded platforms. The listed 250 kbps rate and capability up to 1 Mbps cover configuration downloads, status polling, and short command exchanges. ±15 kV ESD protection adds useful resilience for a cable-connected industrial port, although the enclosure, grounding, and signal-routing strategy must still be engineered for the installation environment.
推荐
Point-of-Sale Terminal Interface
The MAX3232ECUP+TG071 is suitable for a point-of-sale terminal that connects a low-voltage processor to a service port, printer interface, or diagnostic connector. The integrated 2/2 transceiver arrangement reduces the number of external interface ICs while supporting two RS-232 paths in a compact 20-pin TSSOP package. Its 3.0 V to 5.5 V operating range permits use with either 3.3 V or 5 V logic domains. ESD protection rated to ±15 kV is valuable around user-accessible cables, while the low shutdown current down to 10 nA helps limit standby demand in intermittently powered retail equipment.
推荐
Test and Measurement Control Port
The MAX3232ECUP+TG071 can provide a compact control interface in test equipment, programmable instruments, and laboratory automation systems. Two RS-232 channels can carry commands and status independently, while the transceiver's listed 250 kbps rate and capability up to 1 Mbps support common serial-control protocols. The 3.0 V to 5.5 V supply range allows integration beside modern FPGA, microcontroller, or embedded-computing rails. For bench equipment, place the charge-pump network close to the device and keep external cables away from sensitive measurement circuitry to prevent cable transients and ground-current effects from degrading accuracy.
推荐
Embedded Data Acquisition Unit
The MAX3232ECUP+TG071 is appropriate for data-acquisition units that expose configuration or telemetry through RS-232. Its 2/2 channel arrangement allows one path for host commands and another for synchronized status or diagnostic data, reducing the need for additional transceivers in a 20-pin TSSOP footprint. Operation from 3.0 V to 5.5 V suits compact controller boards, and the power-down current down to 10 nA is beneficial when the acquisition unit spends extended periods between measurement sessions. Ensure the external charge-pump capacitors meet the manufacturer's recommended values and route the transceiver ground carefully to minimize coupling into analog acquisition channels.
推荐
Portable Service and Diagnostic Interface
The MAX3232ECUP+TG071 supports portable diagnostic equipment that communicates with service ports through short RS-232 links. A 3.0 V minimum supply voltage allows operation from efficient 3.3 V power systems, while the 20-pin TSSOP package limits board area in compact handheld designs. The device provides two transmitters, two receivers, and ±15 kV ESD protection for a connector that may be handled during field service. Its shutdown current down to 10 nA is useful when the unit powers down between service sessions. Firmware should still control shutdown deliberately and wake reliably when a connected host resumes communication.
推荐
Legacy Equipment Control Panel
The MAX3232ECUP+TG071 can bridge a modern control panel and legacy RS-232 equipment that requires true RS-232 voltage levels. The integrated charge-pump circuitry generates the required bipolar signal levels, avoiding the external pump network that discrete driver designs may require. Two transmitters and two receivers permit command and feedback paths in one package, and the 3.0 V to 5.5 V range supports common industrial control voltages. During PCB layout, use the manufacturer reference network, maintain the specified capacitor types and values, and separate cable-side routing from logic-side traces to minimize switching transients and ground bounce.
推荐
推荐产品汇总
工程参考数据: MAX3232ECUP+TG071 ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | MAX3222EIPWR | MAX3222ECUP+TG071 | MAX3222EUA+TG071 | MAX3232EUA+TG071 | SN75C3222EPWR |
|---|---|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Texas Instruments |
| Package | 20-pin TSSOP | 20-pin TSSOP | 20-pin TSSOP | 20-pin TSSOP | 20-pin TSSOP | 20-pin TSSOP |
| Transmitter / Receiver Configuration | 2/2 | 2/2 | 2/2 | 2/2 | 2/2 | 2/2 |
关键差异点
- Lower shutdown consumption (对比 MAX3222EIPWR)
- Two RS-232 channels in one package (对比 SN75C3222EPWR)
- Defined protection and operating limits (对比 MAX3222EUA+TG071)
设计说明
Place the charge-pump capacitors and the transceiver's required interface capacitors directly beside their associated pins. Keep the external capacitor network compact and follow the manufacturer reference layout because long charge-pump traces can increase radiated noise and reduce effective surge margin. Route the RS-232 connector-side traces separately from precision analog inputs and high-speed clock or data nets.
Do not substitute a MAX3222E device without checking shutdown behavior. According to the manufacturer family documentation, MAX3222E variants consume about 1 µA in shutdown and keep their receivers active, while MAX3232E variants support power-down current down to 10 nA. The 100× difference can affect battery life, and active receivers may create a logic-state transition when the host resumes communication.
The integrated charge-pump circuit can introduce periodic switching energy onto the power rail. Place local supply bypass capacitance at the device, maintain the shortest practical connection to the charge-pump capacitor network, and observe the intended shutdown state during sensitive measurements. If the transceiver shares a board with analog circuitry, consider isolating or filtering the supply rail before it reaches high-impedance front ends.
Treat the connector side and logic side of the interface as separate routing regions. Connect the transceiver ground and chassis or signal ground using the topology recommended in the application circuit, and keep long cable routes away from sensitive circuitry. Validate the finished board with ESD, conducted-emissions, and communication-integrity testing because the device's ±15 kV ESD rating does not replace a compliant connector and enclosure design.
合规信息
The manufacturer documentation identifies JESD-609 code e3, MSL 1, matte-tin terminal finish, a 260 °C peak reflow temperature, and a 30-second maximum peak-reflow time. RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status require confirmation from the current manufacturer declaration or product documentation.