Texas Instruments

MAX3232IDE4 - 250kbps 2/2 RS-232 Transceiver | Texas Instruments

MPN: MAX3232IDE4 ✓ Aktif
3 V to 5.5 V Vdss 16-pin SOIC Package
MOQ: 1 |

MAX3232IDE4 Ringkasan

Texas Instruments MAX3232IDE4 is a 2/2 RS-232 line-driver and receiver transceiver with a 3 V to 5.5 V supply range, operation up to 250 kbit/s, and a 16-pin SOIC package. The device also provides ±15 kV human-body-model ESD protection on the serial-port connection pins and operates in the -40°C to +85°C industrial temperature range.

An RS-232 transceiver is an interface IC that bridges the logic-level voltage domain of a controller or computer with the higher-voltage, bipolar signaling domain used by RS-232 equipment. The MAX3232 category combines two drivers, two receivers, and dual charge-pump circuitry that generates the positive and negative voltages required by compliant RS-232 line drivers.

The principal features are two transmit channels, two receive channels, full-duplex operation, and data rates up to 250 kbit/s. Its dual charge-pump design permits operation from a single 3 V to 5.5 V supply without an external negative supply. The integrated charge-pump capacitors support a compact implementation in the 16-SOIC surface-mount package.

The MAX3232 architecture translates TTL and CMOS-compatible input signals to RS-232 levels and converts incoming RS-232 signals back to logic levels. Its 300 ns propagation delay supports dependable communication across conventional serial links. The protected line-driver and line-receiver pins are intended for exposed serial connectors where electrostatic discharge is a practical concern.

Typical uses include industrial serial-port equipment, data-acquisition systems, embedded-control consoles, point-of-sale terminals, and legacy peripheral interfaces. The dual-channel arrangement is particularly useful when a product needs one transmit and one receive path for RS-232 communication while preserving a second driver or receiver for status, control, or another RS-232 port.

PCB design should place the charge-pump capacitors close to their associated pins and provide a direct ground return to the device. Keep the RS-232 traces short and route them away from sensitive clock, reset, and analog signals. External protection may still be required when long cables or severe industrial transients are expected.

This product record combines electrical specifications, package details, application guidance, drop-in alternatives, and practical layout considerations to support component selection and PCB implementation. The comparison tables also highlight temperature-grade, package, and feature differences that should be reviewed before approving a substitute.

Pilihan pengganti yang segera untuk MAX3232IDE4 — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

Varietas dalam siri ini

Model serupa yang kompatibel dengan pengganti yang segera MAX3232IDE4 (sama faktor bentuk dan kaki) — berbeza dalam Maximum Data Rate, Supply Voltage Range, Device Type, Interface Standard, Operating Temperature Range.

Maxim Integrated
Maximum Data Rate: Up to 1Mbps
Supply Voltage Range: 3.0V to 5.5V
Device Type: Dual RS-232 transceiver
Bandingkan Dengan MAX3232IDE4 →
Analog Devices
Maximum Data Rate: Up to 1 Mbps
Supply Voltage Range: 3.0 V to 5.5 V
Device Type: RS-232 transceiver
Bandingkan Dengan MAX3232IDE4 →

MAX3232ESE4

✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 16-SOIC
Same 3 V to 5.5 V supply, 250 kbit/s rate, 2/2 RS-232 architecture, and -40°C to +85°C range; ordering and marking configuration differ.

📋 Alternatif rujukan (tidak dalam katalog)

MAX3232EESE4

✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 16-SOIC
Same 3 V to 5.5 V supply and 2/2 RS-232 configuration; the EES ordering option has a different enhanced-device suffix and approximately 10% lower overall parameter proximity.

📋 Alternatif rujukan (tidak dalam katalog)

MAX3232CSE4

✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 16-SOIC
Same 3 V to 5.5 V supply, 250 kbit/s rate, and 2/2 RS-232 architecture; commercial temperature range is 0°C to +70°C versus -40°C to +85°C, a 15°C lower minimum rating.

📋 Alternatif rujukan (tidak dalam katalog)

MAX3232CSE+

✅ Masuk Drop-In
Maxim Integrated
📦 16-SOIC
Dual RS-232 transceiver · 2 · 2 · 3.0V to 5.5V · Up to 1Mbps · True RS-232 · RS-232, CMOS · Low-power

Hubungi untuk harga

Lihat Datasheet →

MAX3232ESE+

✅ Masuk Drop-In
Analog Devices
📦 16-SOIC
RS-232 transceiver · 2 · 2 · 3.0 V to 5.5 V · Up to 1 Mbps · RS-232 · 16-pin SOIC

Hubungi untuk harga

Lihat Datasheet →

MAX3232IDE4 Spesifikasi

Number of Drivers 2
Number of Receivers 2
Transceiver Configuration 2/2 full-duplex RS-232
Supply Voltage Range 3 V to 5.5 V
Maximum Data Rate 250 kbit/s
Propagation Delay 300 ns
ESD Protection ±15 kV using the human-body model
Gambaran Suhu Operasi -40°C to +85°C
Kemasan 16-pin SOIC
Package Width 3.90 mm
Package Body Width 0.154 in
Terminal Count 16
Jenis Pemasangan Surface mount
Lead-Free Status Lead-free
Packaging Tube
RS-232 Compliance TIA/EIA-232-F and ITU V.28
Charge-Pump Circuit Dual
Output Logic TTL/CMOS-compatible
Data Direction Full duplex

Panduan Konfigurasi Pin MAX3232IDE4 0.154 in

Konfigurasi pin untuk MAX3232IDE4 (0.154 in pakai). Penomeran pin, fungsi, dan garis bentuk koneksi ditakrifkan dalam dokumen pengeluar. Rujuk dokumen untuk kebentuk dan pedoman pengasman.

Garis bentuk pengecah pakai 0.154 in untuk MAX3232IDE4

Tiada data garisan pin yang diperoleh untuk MAX3232IDE4.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

MAX3232IDE4 patut untuk 6 aplikasis: Industrial Serial-Port Control, Data-Acquisition Equipment, Point-of-Sale Terminal Interface, Embedded RS-232 Console, Legacy Peripheral Interconnection, Security and Access-Control Terminal.

🏭

Industrial Serial-Port Control

The MAX3232IDE4 fits industrial serial-port control because it combines two drivers and two receivers with a 250 kbit/s maximum data rate in a 16-pin SOIC package. Place it between a 3.3 V or 5 V controller and an external RS-232 connector, using the internal dual charge pump to produce the required bipolar driver levels. The -40°C to +85°C rating supports temperature-controlled equipment, while the 300 ns propagation delay provides margin for ordinary command and response traffic. The ±15 kV human-body-model ESD rating adds useful protection at connector-facing pins, although cable transients may still require separate surge protection.

📟

Data-Acquisition Equipment

The MAX3232IDE4 is useful in data-acquisition systems that need to connect a controller or host to legacy measurement equipment over RS-232. Its two-driver, two-receiver arrangement can support one full-duplex measurement link and an additional control or status path. Operation from 3 V to 5.5 V supports both 3.3 V embedded processors and 5 V instrument controllers, while 250 kbit/s is suitable for moderate-rate command and sampled-data transfers. Place the charge-pump capacitors close to the transceiver and route the connector-side traces away from high-impedance measurement inputs to minimize coupling.

🖥️

Point-of-Sale Terminal Interface

The MAX3232IDE4 supports point-of-sale terminals that must communicate with RS-232 peripherals such as printers, scales, or magnetic readers. The 2/2 architecture allows a primary full-duplex transaction channel plus another transmit or receive connection for equipment control. Its 3 V to 5.5 V operating range permits use with either 3.3 V or 5 V system logic, and the 16-pin SOIC package supports compact PCB layouts. The industrial temperature range is useful for kiosks and unattended terminals, while ESD protection on the serial-port pins improves robustness when a user-accessible cable is repeatedly connected and disconnected.

🔧

Embedded RS-232 Console

The MAX3232IDE4 is appropriate for embedded consoles that expose a legacy RS-232 maintenance or configuration port. A single transceiver can provide both directions of a service link without requiring a separate driver and receiver IC. The 250 kbit/s capability exceeds the requirements of many configuration protocols, while the 300 ns propagation delay keeps command-response latency low. Operating from a single 3 V to 5.5 V rail simplifies interface design around embedded processors. Firmware designers should define the logic levels and connector wiring consistently with the manufacturer pin descriptions, and production firmware should include a means to detect disconnected or improperly wired cables.

💻

Legacy Peripheral Interconnection

The MAX3232IDE4 can bridge modern control logic to legacy RS-232 printers, scanners, and laboratory peripherals without changing the established connector standard. Its two line drivers and two receivers provide flexibility for multiple unidirectional peripheral links or a full-duplex primary port. The device supports 250 kbit/s and operates from 3 V to 5.5 V, allowing it to coexist with contemporary embedded logic. Use the full 16-pin SOIC footprint and follow the manufacturer charge-pump network to maintain expected driver voltage and timing. For long cables or electrically noisy installations, add external protection and verify the complete interface against applicable system-level surge requirements.

🛡️

Security and Access-Control Terminal

The MAX3232IDE4 can provide the RS-232 path between an access-control controller and a peripheral reader, keypad interface, or alarm module. Two transmit and receive channels permit a full-duplex command channel alongside a separate diagnostic or status line. The -40°C to +85°C range suits indoor and outdoor equipment exposed to seasonal temperature changes, and the 3 V to 5.5 V supply range simplifies shared-rail design. The ±15 kV human-body-model ESD protection is particularly relevant to service connectors, although technicians should still use insulated cable procedures and the enclosure should provide a defined chassis and signal-ground strategy.

Ringkasan Produk Disebarkan

MAX3232ESE4 Same-family RS-232 transceiver Dipergunakan di: Industrial Serial-Port Control, Embedded RS-232 Console MAX3232CSE+ Maxim Integrated Dipergunakan di: Industrial Serial-Port Control, Point-of-Sale Terminal Interface, Legacy Peripheral Interconnection MAX3232CSE4 Same-family commercial-temperature option Dipergunakan di: Data-Acquisition Equipment, Legacy Peripheral Interconnection MAX3232ESE+ Analog Devices Dipergunakan di: Data-Acquisition Equipment, Embedded RS-232 Console, Security and Access-Control Terminal MAX3232EESE4 Same-family enhanced transceiver option Dipergunakan di: Point-of-Sale Terminal Interface, Security and Access-Control Terminal
What is the operating voltage of MAX3232IDE4?
The MAX3232IDE4 operates from a 3 V to 5.5 V supply. According to the Texas Instruments datasheet, this range allows the two RS-232 drivers and two receivers to operate from either a 3.3 V or 5 V system rail. Its dual charge-pump circuitry generates the bipolar voltage levels required by the RS-232 outputs without requiring a separate negative supply.
What are the key specifications of MAX3232IDE4 that engineers should know?
The MAX3232IDE4 provides two RS-232 drivers, two receivers, operation to 250 kbit/s, and ±15 kV human-body-model ESD protection. According to the Texas Instruments datasheet, it operates from 3 V to 5.5 V, has a 300 ns propagation delay, supports full-duplex communication, and is packaged in a 16-pin SOIC rated for -40°C to +85°C operation.
Where can I download the MAX3232IDE4 datasheet PDF?
The MAX3232IDE4 datasheet PDF is available through the Texas Instruments document link listed on this page. It contains the complete pin descriptions, charge-pump capacitor values, electrical characteristics, RS-232 timing, and typical application circuits. Use the manufacturer pin-description table when assigning PCB nets and confirming connector-side signal polarity.
Where can I find the MAX3232IDE4 pinout?
The MAX3232IDE4 pinout is defined in the pin-description table of the Texas Instruments datasheet. The device uses a 16-pin SOIC and separates the two transmit outputs, two receive inputs, supply pins, ground, and charge-pump nodes. Assign the PCB footprint from the package drawing and verify every net against the manufacturer pin table before fabrication.
What is the maximum data rate of MAX3232IDE4?
The MAX3232IDE4 supports data rates up to 250 kbit/s. According to the Texas Instruments datasheet, the device also has a 300 ns propagation delay and contains two line drivers plus two line receivers. These characteristics suit conventional RS-232 links in industrial controllers, data-acquisition equipment, and legacy serial-port peripherals.
Does MAX3232IDE4 require a negative power supply?
No. The MAX3232IDE4 does not require an external negative supply. Its internal dual charge-pump circuit derives the positive and bipolar voltages needed by the RS-232 drivers from a single 3 V to 5.5 V supply. The Texas Instruments datasheet specifies the required charge-pump capacitors, which should be connected exactly as shown in the typical application circuit.
What ESD protection does MAX3232IDE4 provide?
The MAX3232IDE4 provides ±15 kV human-body-model ESD protection on the serial-port connection pins. According to the Texas Instruments datasheet, the device also meets TIA/EIA-232-F and ITU V.28 requirements. These ratings are useful for equipment with externally accessible serial connectors, although cable-side and system-level protection requirements should still be evaluated.
What can replace MAX3232IDE4?
The MAX3232CSE4 and MAX3232ESE4 from Texas Instruments are same-family 16-SOIC alternatives with the same two-driver, two-receiver RS-232 architecture. The MAX3232CSE4 is intended for a narrower temperature range, while MAX3232ESE4 offers the same industrial temperature coverage as the target. Confirm pinout, charge-pump capacitor values, and timing before substitution.
Is MAX3232 the same as MAX3232IDE4?
MAX3232 is the device family name, while MAX3232IDE4 identifies a specific package, temperature, and ordering configuration. The Texas Instruments MAX3232 family includes the same core two-driver, two-receiver RS-232 architecture. The exact MAX3232IDE4 configuration uses a 16-pin SOIC, an industrial -40°C to +85°C range, and lead-free tube packaging.
What is the best Analog Devices equivalent for MAX3232IDE4?
The Analog Devices MAX3232CSE+ is the closest documented cross-brand option for a 16-SOIC footprint, while MAX3232ESE+ provides the same family with a different temperature grade. Analog Devices states that MAX3232 is pin-, package-, and functionally compatible with the industry-standard MAX232. Confirm charge-pump capacitor values and operating temperature against the selected alternative.
When should I choose MAX3232IDE4 over MAX3232ESE4?
Choose MAX3232IDE4 when the design specifically targets the ordered Texas Instruments 16-pin SOIC configuration and its -40°C to +85°C operating range. MAX3232ESE4 is also a same-family SOIC option, but it should be selected only after checking its ordering suffix, package marking, qualification status, and manufacturer ordering information against the production BOM.
Is MAX3232IDE4 suitable for industrial serial communication?
The MAX3232IDE4 is suitable for many industrial serial interfaces because its specified operating temperature range is -40°C to +85°C and its line pins include ±15 kV human-body-model ESD protection. According to the Texas Instruments datasheet, it supports operation to 250 kbit/s. Additional surge and cable protection may still be needed in severe industrial environments.
How many RS-232 channels does MAX3232IDE4 provide?
The MAX3232IDE4 provides two RS-232 line drivers and two line receivers. It can therefore support one full-duplex RS-232 port while leaving a second driver and receiver available for another link, control function, or status connection. The Texas Instruments datasheet identifies the device as a 2/2 transceiver with full-duplex capability.
Where can I buy MAX3232IDE4 and check its lead time?
Use the Request a Quote form on this page to request MAX3232IDE4 pricing, current lead time, stock status, and minimum order quantity. The form routes the request without embedding changing commercial terms in the technical content. For production planning, specify the required tube quantity and any date-code or traceability requirements with the order.
What is the price of MAX3232IDE4?
Current MAX3232IDE4 pricing should be obtained through the Request a Quote form on this page. The structured commercial data is refreshed as supplier conditions change, so the page does not present a static price figure. Include your required quantity, shipment destination, target date, and packaging preference to obtain an actionable quotation.
Is MAX3232IDE4 in stock?
Use the Request a Quote form on this page to check current MAX3232IDE4 stock and supply status. Availability can vary with order quantity, package configuration, date code, and market conditions, so a current written response is preferable to relying on a generic listing indicator. State the required quantity and target delivery date in the request.

Data referensi kejuruteraan untuk MAX3232IDE4 — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose MAX3232IDE4 for new industrial or commercial designs that require a 16-pin SOIC RS-232 interface, two drivers, two receivers, and operation from 3 V to 5.5 V. Its -40°C to +85°C rating is the main reason to prefer it over MAX3232CSE4, whose commercial temperature range begins at 0°C. MAX3232ESE4 and MAX3232EESE4 are suitable same-brand alternatives when their ordering configuration and marked-device details are acceptable. For a second source, MAX3232CSE+ and MAX3232ESE+ from Analog Devices share the MAX3232 family footprint, but their exact temperature grade, charge-pump values, lifecycle status, and qualification must be checked before production release. For any substitution, preserve the 16-SOIC land pattern, verify every pin against the manufacturer pin table, review the charge-pump capacitor network, and reconfirm data-rate and temperature requirements.

Perbandingan dengan Gantian

Parametr Produk Ini MAX3232ESE4 MAX3232EESE4 MAX3232CSE4 MAX3232CSE+ MAX3232ESE+
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Analog Devices Analog Devices
Package 16-SOIC 16-SOIC - same package 16-SOIC - same package 16-SOIC - same package 16-SOIC - same package 16-SOIC - same package

Penyeberangsung Jelas

  • Full industrial temperature coverage (vsMAX3232CSE4)
  • Two independent transmit and receive paths (vsMAX3232CSE+)
  • Single-rail bipolar voltage generation (vsMAX3232ESE+)

Catatan Desain

Place the charge-pump capacitors directly between the pins shown in the Texas Instruments datasheet and keep their return paths short. These components carry switched current and should not share long traces with sensitive analog inputs. Route the MAX3232 ground pin to the interface ground through a direct, low-impedance path, and provide a nearby supply bypass capacitor to suppress high-frequency noise from the 3 V to 5.5 V rail.

Do not treat the 16-pin SOIC footprint as sufficient evidence that any 16-pin RS-232 transceiver is interchangeable. Confirm driver outputs, receiver inputs, charge-pump connections, supply pins, and ground against the manufacturer pin-description table. Also verify the exact operating-temperature grade because MAX3232IDE4 is rated for -40°C to +85°C, while a commercial-grade alternative may be limited to 0°C to +70°C.

Keep RS-232 connector traces away from clocks, resets, sensor inputs, and precision analog nets, and avoid routing them beneath noisy switching-converter sections. The MAX3232IDE4 can operate to 250 kbit/s with a 300 ns propagation delay, but cable reflections and common-mode transients are principally interface-layout problems. Use a defined return path, maintain practical connector geometry, and add external protection when cables leave the enclosure or pass through industrial environments.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bosong logam timbal
Yes
Bosong halogen
Unknown
Mineral konflik
Unknown

The product listing identifies MAX3232IDE4 as lead-free. RoHS, REACH, halogen-free, and conflict-minerals status are not stated in the available product information. AEC-Q100 is not applicable because the device is an industrial-temperature RS-232 interface IC rather than an automotive-qualified component.

Data disahkan pada: 2026-11-09 — data yang disahkan dan disusun semula oleh pasukan kejuruteraan komponen XAIPART

Pencarian Berhubungan

MAX3232IDE4 datasheet MAX3232IDE4 pinout MAX3232IDE4 datasheet pdf Texas Instruments MAX3232IDE4 MAX3232IDE4 equivalent MAX3232IDE4 replacement MAX3232IDE4 cross reference MAX3232IDE4 vs MAX3232ESE4 MAX3232IDE4 footprint MAX3232IDE4 price MAX3232IDE4 stock MAX3232 16-SOIC pinout MAX3232IDE4 application circuit MAX3232 250kbps RS-232 IC

Komponen dan Tanda berkaitan

Texas Instruments MAX3232IDE4 MAX3232ESE4 MAX3232EESE4 MAX3232CSE4 Analog Devices MAX3232CSE+ MAX3232ESE+ RS-232 RS-232 transceiver line driver line receiver interface IC semiconductor TIA/EIA-232-F ITU V.28 RoHS REACH 16-SOIC SOIC family surface mount dual charge pump ESD protection industrial control serial communication
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ