MAX3232IDE4 - 250kbps 2/2 RS-232 Transceiver | Texas Instruments
MPN: MAX3232IDE4 ✓ 啟用中MAX3232IDE4 概覽
An RS-232 transceiver is an interface IC that bridges the logic-level voltage domain of a controller or computer with the higher-voltage, bipolar signaling domain used by RS-232 equipment. The MAX3232 category combines two drivers, two receivers, and dual charge-pump circuitry that generates the positive and negative voltages required by compliant RS-232 line drivers.
The principal features are two transmit channels, two receive channels, full-duplex operation, and data rates up to 250 kbit/s. Its dual charge-pump design permits operation from a single 3 V to 5.5 V supply without an external negative supply. The integrated charge-pump capacitors support a compact implementation in the 16-SOIC surface-mount package.
The MAX3232 architecture translates TTL and CMOS-compatible input signals to RS-232 levels and converts incoming RS-232 signals back to logic levels. Its 300 ns propagation delay supports dependable communication across conventional serial links. The protected line-driver and line-receiver pins are intended for exposed serial connectors where electrostatic discharge is a practical concern.
Typical uses include industrial serial-port equipment, data-acquisition systems, embedded-control consoles, point-of-sale terminals, and legacy peripheral interfaces. The dual-channel arrangement is particularly useful when a product needs one transmit and one receive path for RS-232 communication while preserving a second driver or receiver for status, control, or another RS-232 port.
PCB design should place the charge-pump capacitors close to their associated pins and provide a direct ground return to the device. Keep the RS-232 traces short and route them away from sensitive clock, reset, and analog signals. External protection may still be required when long cables or severe industrial transients are expected.
This product record combines electrical specifications, package details, application guidance, drop-in alternatives, and practical layout considerations to support component selection and PCB implementation. The comparison tables also highlight temperature-grade, package, and feature differences that should be reviewed before approving a substitute.
直接替換替代品,適用於 MAX3232IDE4 — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: MAX3232IDE4 (相同外形與佔位) — 差異在於 Maximum Data Rate, Supply Voltage Range, Device Type, Interface Standard, Operating Temperature Range.
MAX3232ESE4
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
MAX3232EESE4
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
MAX3232CSE4
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
MAX3232CSE+
✅ 直接替換聯絡詢價
查看資料表 →MAX3232ESE+
✅ 直接替換聯絡詢價
查看資料表 →MAX3232IDE4 規格
| Number of Drivers | 2 |
| Number of Receivers | 2 |
| Transceiver Configuration | 2/2 full-duplex RS-232 |
| Supply Voltage Range | 3 V to 5.5 V |
| Maximum Data Rate | 250 kbit/s |
| Propagation Delay | 300 ns |
| ESD Protection | ±15 kV using the human-body model |
| 工作溫度範圍 | -40°C to +85°C |
| 封裝 | 16-pin SOIC |
| Package Width | 3.90 mm |
| Package Body Width | 0.154 in |
| Terminal Count | 16 |
| 安裝類型 | Surface mount |
| Lead-Free Status | Lead-free |
| Packaging | Tube |
| RS-232 Compliance | TIA/EIA-232-F and ITU V.28 |
| Charge-Pump Circuit | Dual |
| Output Logic | TTL/CMOS-compatible |
| Data Direction | Full duplex |
MAX3232IDE4 0.154 in 腳位配置指南
MAX3232IDE4(0.154 in 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。
無詳細腳位定義資料: MAX3232IDE4.
請參閱 資料表 以查看完整腳位配置。
典型應用
MAX3232IDE4 適用於 6 應用s: Industrial Serial-Port Control, Data-Acquisition Equipment, Point-of-Sale Terminal Interface, Embedded RS-232 Console, Legacy Peripheral Interconnection, Security and Access-Control Terminal.
Industrial Serial-Port Control
The MAX3232IDE4 fits industrial serial-port control because it combines two drivers and two receivers with a 250 kbit/s maximum data rate in a 16-pin SOIC package. Place it between a 3.3 V or 5 V controller and an external RS-232 connector, using the internal dual charge pump to produce the required bipolar driver levels. The -40°C to +85°C rating supports temperature-controlled equipment, while the 300 ns propagation delay provides margin for ordinary command and response traffic. The ±15 kV human-body-model ESD rating adds useful protection at connector-facing pins, although cable transients may still require separate surge protection.
推薦
Data-Acquisition Equipment
The MAX3232IDE4 is useful in data-acquisition systems that need to connect a controller or host to legacy measurement equipment over RS-232. Its two-driver, two-receiver arrangement can support one full-duplex measurement link and an additional control or status path. Operation from 3 V to 5.5 V supports both 3.3 V embedded processors and 5 V instrument controllers, while 250 kbit/s is suitable for moderate-rate command and sampled-data transfers. Place the charge-pump capacitors close to the transceiver and route the connector-side traces away from high-impedance measurement inputs to minimize coupling.
推薦
Point-of-Sale Terminal Interface
The MAX3232IDE4 supports point-of-sale terminals that must communicate with RS-232 peripherals such as printers, scales, or magnetic readers. The 2/2 architecture allows a primary full-duplex transaction channel plus another transmit or receive connection for equipment control. Its 3 V to 5.5 V operating range permits use with either 3.3 V or 5 V system logic, and the 16-pin SOIC package supports compact PCB layouts. The industrial temperature range is useful for kiosks and unattended terminals, while ESD protection on the serial-port pins improves robustness when a user-accessible cable is repeatedly connected and disconnected.
推薦
Embedded RS-232 Console
The MAX3232IDE4 is appropriate for embedded consoles that expose a legacy RS-232 maintenance or configuration port. A single transceiver can provide both directions of a service link without requiring a separate driver and receiver IC. The 250 kbit/s capability exceeds the requirements of many configuration protocols, while the 300 ns propagation delay keeps command-response latency low. Operating from a single 3 V to 5.5 V rail simplifies interface design around embedded processors. Firmware designers should define the logic levels and connector wiring consistently with the manufacturer pin descriptions, and production firmware should include a means to detect disconnected or improperly wired cables.
推薦
Legacy Peripheral Interconnection
The MAX3232IDE4 can bridge modern control logic to legacy RS-232 printers, scanners, and laboratory peripherals without changing the established connector standard. Its two line drivers and two receivers provide flexibility for multiple unidirectional peripheral links or a full-duplex primary port. The device supports 250 kbit/s and operates from 3 V to 5.5 V, allowing it to coexist with contemporary embedded logic. Use the full 16-pin SOIC footprint and follow the manufacturer charge-pump network to maintain expected driver voltage and timing. For long cables or electrically noisy installations, add external protection and verify the complete interface against applicable system-level surge requirements.
推薦
Security and Access-Control Terminal
The MAX3232IDE4 can provide the RS-232 path between an access-control controller and a peripheral reader, keypad interface, or alarm module. Two transmit and receive channels permit a full-duplex command channel alongside a separate diagnostic or status line. The -40°C to +85°C range suits indoor and outdoor equipment exposed to seasonal temperature changes, and the 3 V to 5.5 V supply range simplifies shared-rail design. The ±15 kV human-body-model ESD protection is particularly relevant to service connectors, although technicians should still use insulated cable procedures and the enclosure should provide a defined chassis and signal-ground strategy.
推薦
推薦產品摘要
工程參考資料,適用於 MAX3232IDE4 — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | MAX3232ESE4 | MAX3232EESE4 | MAX3232CSE4 | MAX3232CSE+ | MAX3232ESE+ |
|---|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Analog Devices | Analog Devices |
| Package | 16-SOIC | 16-SOIC - same package | 16-SOIC - same package | 16-SOIC - same package | 16-SOIC - same package | 16-SOIC - same package |
主要差異化特點
- Full industrial temperature coverage (對比MAX3232CSE4)
- Two independent transmit and receive paths (對比MAX3232CSE+)
- Single-rail bipolar voltage generation (對比MAX3232ESE+)
設計說明
Place the charge-pump capacitors directly between the pins shown in the Texas Instruments datasheet and keep their return paths short. These components carry switched current and should not share long traces with sensitive analog inputs. Route the MAX3232 ground pin to the interface ground through a direct, low-impedance path, and provide a nearby supply bypass capacitor to suppress high-frequency noise from the 3 V to 5.5 V rail.
Do not treat the 16-pin SOIC footprint as sufficient evidence that any 16-pin RS-232 transceiver is interchangeable. Confirm driver outputs, receiver inputs, charge-pump connections, supply pins, and ground against the manufacturer pin-description table. Also verify the exact operating-temperature grade because MAX3232IDE4 is rated for -40°C to +85°C, while a commercial-grade alternative may be limited to 0°C to +70°C.
Keep RS-232 connector traces away from clocks, resets, sensor inputs, and precision analog nets, and avoid routing them beneath noisy switching-converter sections. The MAX3232IDE4 can operate to 250 kbit/s with a 300 ns propagation delay, but cable reflections and common-mode transients are principally interface-layout problems. Use a defined return path, maintain practical connector geometry, and add external protection when cables leave the enclosure or pass through industrial environments.
合規資訊
The product listing identifies MAX3232IDE4 as lead-free. RoHS, REACH, halogen-free, and conflict-minerals status are not stated in the available product information. AEC-Q100 is not applicable because the device is an industrial-temperature RS-232 interface IC rather than an automotive-qualified component.