Analog Devices

MAX3385ECWN - 250kbps True RS-232 Transceiver | Analog Devices

MPN: MAX3385ECWN ✓ Aktif
3.0V to 5.5V Vdss 18-SOIC Package
MOQ: 1 |

MAX3385ECWN Ringkasan

Analog Devices MAX3385ECWN is a true RS-232 transceiver IC supporting a 3.0V to 5.5V supply, data rates up to 250kbps, and ESD protection rated at ±15kV. The device is offered in an 18-SOIC package and provides two drivers and three receivers, making it suitable for bidirectional and multi-channel serial-interface equipment.

A true RS-232 transceiver is an interface IC that converts logic-level signals to RS-232 levels and converts incoming RS-232 signals back to logic levels. RS-232 is a point-to-point, unbalanced serial-interface standard widely used for industrial control, data acquisition, instrumentation, and legacy peripheral connections. Its transmitter and receiver circuitry provide the voltage conversion and noise tolerance required when logic levels must communicate with a longer, unbalanced cable.

The MAX3385ECWN supports operation from a single 3.0V to 5.5V supply, allowing use in both 3.3V and 5V systems. Its maximum data rate of 250kbps is suitable for moderate-speed serial links, and the ±15kV ESD rating adds protection for exposed connector pins. The 2/3 driver-receiver configuration is useful when a design requires more receiver channels than transmitter channels.

The MAX3385ECWN family uses integrated true RS-232 line-driver and line-receiver stages rather than a limited-voltage-only interface. This distinction is important when connecting to equipment that expects RS-232 voltage levels. Its operating-temperature range is specified as 0°C to 70°C for the commercial-grade CWN configuration, making it appropriate for equipment intended for controlled indoor or industrial environments within that range.

Typical uses include industrial serial adapters, programmable-logic-controller communication, test and measurement instruments, barcode and data-acquisition equipment, and embedded control systems that retain an RS-232 port. Systems operating at 250kbps should include appropriate cable routing and grounding because unbalanced RS-232 performance can still be affected by ground offsets, electromagnetic interference, and connector cable characteristics.

PCB implementation should follow the manufacturer's pin and decoupling guidance, particularly for supply connections and exposed RS-232 pins. Place the required bypass capacitor close to the device, route transceiver outputs to the connector through a short and appropriately arranged path, and confirm that system grounding satisfies the interface requirements before enabling communication.

This page combines the manufacturer-oriented device identity, verified distributor descriptions, RS-232 design guidance, package details, and replacement analysis. It also identifies where additional electrical, mechanical, and lifecycle information must be confirmed in the manufacturer datasheet or through a current manufacturer quotation.

Pilihan pengganti yang segera untuk MAX3385ECWN — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

MAX3384ECWN

✅ Masuk Drop-In
📦 18-SOIC
Same 18-SOIC package class and same-family RS-232 transceiver positioning; exact driver/receiver and electrical differences require pin-by-pin datasheet confirmation

📋 Alternatif rujukan (tidak dalam katalog)

MAX3385ECWN Spesifikasi

Product Type True RS-232 transceiver
Transceiver Configuration 2 drivers and 3 receivers
Supply Voltage Range 3.0V to 5.5V
Nominal Supply Voltage 3.3V
Maximum Data Rate 250kbps
ESD Protection ±15kV
Interface Standard RS-232
Gambaran Suhu Operasi 0°C to 70°C
Kemasan 18-SOIC
Terminal Count 18 terminals
Package Shape Rectangular
Lead Form Gull wing
Jenis Pemasangan Surface mount
Temperature Grade Commercial

Panduan Konfigurasi Pin MAX3385ECWN rectangular

Konfigurasi pin untuk MAX3385ECWN (rectangular pakai). Penomeran pin, fungsi, dan garis bentuk koneksi ditakrifkan dalam dokumen pengeluar. Rujuk dokumen untuk kebentuk dan pedoman pengasman.

Garis bentuk pengecah pakai rectangular untuk MAX3385ECWN

Tiada data garisan pin yang diperoleh untuk MAX3385ECWN.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

MAX3385ECWN patut untuk 6 aplikasis: Industrial PLC Serial Communication, Test and Measurement Instrumentation, Data Acquisition Equipment, Embedded Control and Service Interfaces, Legacy Peripheral Connectivity, Barcode and Automation Terminals.

🏭

Industrial PLC Serial Communication

The MAX3385ECWN fits legacy programmable-logic-controller and serial-adapter interfaces that require true RS-232 voltage conversion. Its 2-driver, 3-receiver arrangement allows a controller board to communicate through two RS-232 channels while monitoring three incoming signals. Operation from a 3.0V to 5.5V supply supports 3.3V and 5V embedded systems, while the 250kbps maximum data rate suits moderate-speed command and status traffic. The ±15kV ESD rating improves protection at connector-facing circuitry. Designers should keep driver and receiver nets short, provide the required bypass capacitance, and verify the target PLC's logic levels, ground reference, and connector pinout before commissioning.

🖥️

Test and Measurement Instrumentation

The MAX3385ECWN is appropriate for instruments that retain RS-232 control or data ports alongside modern USB, Ethernet, or embedded interfaces. Two transmitters can support separate command and status links, while three receivers can accept responses from multiple devices. The 250kbps limit is adequate for many configuration and low-volume data-transfer tasks, and the true RS-232 line interface avoids relying on a logic-level-only transceiver. The 3.0V-to-5.5V supply range simplifies integration with mixed-voltage instrument electronics. For reliable operation, separate logic and cable grounds according to the system grounding plan, route exposed RS-232 nets away from sensitive analog sections, and confirm the connected instrument's driver and receiver limits.

📟

Data Acquisition Equipment

The MAX3385ECWN can add RS-232 connectivity to a data-acquisition controller that must exchange commands, status, or sampled data with older laboratory equipment. Its three receivers are useful when the controller must monitor several incoming RS-232 sources, while the two drivers support outbound control paths. The 250kbps data-rate ceiling supports moderate transfer speeds rather than high-volume continuous streaming. A single 3.0V-to-5.5V operating range permits use with both 3.3V and 5V subsystems. Careful grounding is essential because RS-232 is an unbalanced interface, and cable routing should avoid high-current switching nodes. Confirm the remote device's connector wiring and ensure that all attached transmitters use compatible voltage levels.

🔧

Embedded Control and Service Interfaces

The MAX3385ECWN is suitable for embedded controllers that must provide a field-service or configuration port using an RS-232 connector. The two-driver and three-receiver arrangement supports bidirectional control plus additional status inputs, and the commercial 0°C-to-70°C range suits equipment operated within controlled indoor environments. Its 250kbps capability is adequate for firmware logs, configuration commands, and routine telemetry. The 3.0V-to-5.5V range allows direct use with common embedded supply levels, reducing the need for a separate interface rail. Designers should provide the manufacturer-recommended supply decoupling, include the required charge-pump components, protect externally accessible lines as required by the system ESD strategy, and validate the complete interface against the service connector's wiring.

📱

Legacy Peripheral Connectivity

The MAX3385ECWN provides a practical interface bridge for embedded systems that must communicate with legacy printers, scanners, scales, or other RS-232 peripherals. Two transmitter channels can serve separate peripherals, while three receiver inputs can accommodate additional status or handshake signals. The true RS-232 implementation is important when the peripheral expects standard bipolar line levels rather than logic-level signals. Operation up to 250kbps supports many short-distance control protocols, while the ±15kV ESD rating is valuable where the interface reaches an external connector. Verify each peripheral's data format, baud rate, flow-control method, and pin assignment. The PCB should include adequate connector clearance and a ground strategy that avoids injecting cable or chassis currents into sensitive circuitry.

📷

Barcode and Automation Terminals

The MAX3385ECWN suits barcode scanners, terminal controllers, and automation peripherals that exchange commands and status data through RS-232. Its 250kbps rate is more than sufficient for ordinary scanner configuration, barcode-event transfer, and low-bandwidth machine-control commands. The 3.0V-to-5.5V operating range simplifies use in terminals built with either 3.3V or 5V logic, and the 2/3 driver-receiver arrangement supports communication with several attached devices. The ±15kV ESD protection rating helps manage electrostatic discharge at an exposed equipment port. Engineers should confirm whether the terminal requires hardware handshake lines, implement the recommended charge-pump and bypass networks, and test the complete system with the intended cable length and peripheral grounding arrangement.

What is the MAX3385ECWN?
The MAX3385ECWN is a true RS-232 transceiver IC from Analog Devices with two drivers and three receivers. According to the manufacturer datasheet description, it operates from a 3.0V to 5.5V supply, supports data rates up to 250kbps, provides ±15kV ESD protection, and is packaged in an 18-SOIC. Its 2/3 configuration is useful when a system needs more receive channels than transmit channels.
What is the operating voltage of MAX3385ECWN?
The MAX3385ECWN operates from 3.0V to 5.5V. This range permits use with 3.3V and 5V supply systems without requiring a separate bipolar RS-232 interface supply. The manufacturer datasheet describes the device as a low-power, true RS-232 transceiver, while the distributor specification also identifies a nominal 3.3V supply configuration.
What is the maximum data rate of MAX3385ECWN?
The MAX3385ECWN supports serial data rates up to 250kbps. According to the manufacturer datasheet description, this makes it appropriate for moderate-speed RS-232 links such as instrument control, programmable-logic-controller communication, and embedded serial equipment. The selected baud rate should also be checked against cable length, connector wiring, grounding, and the electrical characteristics of the connected equipment.
Does MAX3385ECWN include ESD protection?
Yes, the MAX3385ECWN provides ±15kV ESD protection according to the manufacturer datasheet description. This rating applies to the integrated RS-232 interface and is particularly relevant to connector-facing circuitry that may be exposed to electrostatic discharge. The system designer should still use suitable enclosure and grounding practices because ESD protection does not eliminate the need for robust external protection.
What is the difference between a true RS-232 transceiver and a logic-level transceiver?
A true RS-232 transceiver converts between logic-level signals and the bipolar voltage levels required by RS-232. The MAX3385ECWN is identified as a true RS-232 device, so it can connect directly to an RS-232 line-driver and line-receiver interface. A logic-level-only transceiver would not provide the same electrical compatibility and should not be treated as an automatic replacement.
What package does MAX3385ECWN use?
The MAX3385ECWN uses an 18-SOIC package with gull-wing leads and a rectangular body. The distributor listing identifies the part as an 18-SOIC, and the package details also identify 18 terminals and commercial temperature grade. The 18-pin SOIC is not represented by a dedicated canonical package-diagram key, so the package illustration defaults to the generic diagram.
Where can I download the MAX3385ECWN datasheet PDF?
The MAX3385ECWN datasheet is available through the linked manufacturer-document entry at the product's datasheet URL. It is the primary document for the complete pin-description table, electrical characteristics, recommended operating conditions, decoupling requirements, and package drawings. When assigning PCB nets or checking functions not summarized on this page, use the pin-description table and electrical tables in the manufacturer datasheet.
Where can I find the MAX3385ECWN pinout?
Use the pin-description table and package drawing in the MAX3385ECWN manufacturer datasheet to locate every pin. The verified product identity establishes an 18-SOIC package, but the individual pin names and signal assignments are not reproduced here. A complete PCB netlist should therefore be taken directly from the datasheet rather than inferred from the package outline or driver/receiver count.
What is the best drop-in replacement for MAX3385ECWN?
The closest same-family candidate identified for MAX3385ECWN is the MAX3384ECWN, but a drop-in decision still requires pin-by-pin confirmation and an electrical comparison in the manufacturer datasheets. The target is an 18-SOIC, 3.0V-to-5.5V, 250kbps true RS-232 transceiver with two drivers and three receivers. Do not substitute a 16-pin or 20-pin RS-232 device without redesigning the PCB footprint.
Can MAX3384ECWN replace MAX3385ECWN?
MAX3384ECWN is the only explicit same-family cross-reference candidate located for MAX3385ECWN, and it appears in the same 18-SOIC package class. However, the available cross-reference listing does not establish every pin function or electrical rating, so it cannot be certified as a drop-in replacement without checking the manufacturer pinouts. Confirm driver count, receiver count, supply range, data rate, and shutdown behavior before substitution.
When should I choose MAX3385ECWN instead of MAX3384ECWN?
Choose MAX3385ECWN when the design specifically requires its documented 2-driver, 3-receiver arrangement in an 18-SOIC footprint. Select MAX3384ECWN only after comparing its pin assignments and operating characteristics with the target design. The MAX3385ECWN is preferable for systems needing three receive channels, a 3.0V-to-5.5V supply range, operation up to 250kbps, and ±15kV-rated ESD protection.
Is MAX3385ECWN suitable for industrial equipment?
The MAX3385ECWN is suitable for industrial applications whose operating environment remains within its specified 0°C to 70°C commercial-temperature range. Its true RS-232 interface, 3.0V-to-5.5V supply range, 250kbps data-rate capability, and ±15kV ESD protection support communications and control equipment. Systems operating outside 0°C to 70°C should select a part explicitly rated for their required temperature range.
Where can I buy MAX3385ECWN online?
Use the Request a Quote form on this page to request current MAX3385ECWN availability, commercial terms, and delivery information. The product is identified as an 18-SOIC, 2/3-driver-and-receiver true RS-232 transceiver from Analog Devices. The quote workflow allows the exact MPN, package, and target quantity to be reviewed together before an order is placed.
What is the price of MAX3385ECWN?
Current commercial pricing for MAX3385ECWN should be requested through the Request a Quote form on this page. The form accepts the exact MAX3385ECWN order information and is the appropriate place to confirm unit pricing, quantity breaks, stock, and any traceability requirements. Pricing can vary with quantity, market conditions, and order configuration, so a static price should not be treated as current.
What is the lead time and stock status for MAX3385ECWN?
Request the current lead time and stock status through the Request a Quote form on this page. The form should be completed with the required quantity, target date, and shipment destination so the response reflects the current supply position for the exact MAX3385ECWN MPN and 18-SOIC package rather than a family-level approximation.
Is MAX3385ECWN the same as MAX3384ECWN?
No, MAX3385ECWN and MAX3384ECWN are distinct MPNs even though the MAX3384ECWN appears in the available same-family cross-reference results. The MAX3385ECWN is documented as a 2/3 transceiver with two drivers and three receivers in an 18-SOIC package. Treat the MAX3384ECWN as a candidate only until its pin assignments and electrical details have been checked for direct interchangeability.
What are the key specifications of MAX3385ECWN that engineers should know?
The MAX3385ECWN combines a 3.0V-to-5.5V supply range, operation up to 250kbps, ±15kV ESD protection, and a 2-driver, 3-receiver true RS-232 configuration in an 18-SOIC package. Its commercial operating range is 0°C to 70°C. These points define the part's principal use cases, but the manufacturer datasheet remains necessary for pin names, load-capacitance limits, receiver thresholds, and detailed electrical characteristics.

Data referensi kejuruteraan untuk MAX3385ECWN — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose MAX3385ECWN when the PCB requires a true RS-232 interface with two drivers, three receivers, a 3.0V-to-5.5V supply, operation up to 250kbps, and an 18-SOIC footprint. Its three receivers are useful in controllers that monitor more RS-232 sources than they transmit to. Consider MAX3384ECWN only after checking the manufacturer pin tables and electrical ratings because the available cross-reference data does not prove interchangeability. Do not select MAX3224EUP+ or MAX3225EUP+ as direct substitutes: their 20-pin TSSOP packages differ from the target's 18-SOIC footprint, even though both support 3.0V-to-5.5V RS-232 operation. For a new PCB, verify the required number of drivers and receivers, connector wiring, operating temperature, data rate, and whether automatic shutdown or wake-up behavior is needed before finalizing the device.

Perbandingan dengan Gantian

Parametr Produk Ini MAX3384ECWN
Brand Analog Devices Analog Devices
Package 18-SOIC 18-SOIC
Device Type True RS-232 transceiver RS-232 transceiver

Penyeberangsung Jelas

  • Receiver-rich 2/3 transceiver configuration (vsMAX3384ECWN)
  • Clearly defined 250kbps operating ceiling (vsMAX3384ECWN)
  • ±15kV ESD protection for connector-facing circuits (vsMAX3384ECWN)

Catatan Desain

Follow the manufacturer datasheet layout for the charge-pump capacitor, supply bypass, transceiver inputs, outputs, and exposed connector pins. Place the required bypass capacitor immediately across the device supply pins and keep its ground path short. Route each driver output directly toward its RS-232 connector, preserve the manufacturer's recommended component spacing, and avoid placing sensitive analog traces beneath or parallel to the unprotected driver nets.

Do not infer replacement compatibility from the shared 18-SOIC outline. Compare the complete pin-description tables for the MAX3385ECWN and proposed substitute, including driver outputs, receiver inputs, enable or shutdown functions, charge-pump nodes, supply pins, and ground connections. A physical footprint match is necessary but not sufficient; mixed RS-232 and logic signals on the same connector can produce permanent damage if the replacement maps a driver output to a receiver input.

RS-232 uses an unbalanced signal referenced to ground, so system grounding strongly influences noise and communication reliability. Use the application guidance in the manufacturer datasheet to establish chassis, circuit, and signal ground relationships. Keep the transceiver close to the connector, minimize the unprotected driver trace length, provide low-impedance return paths, and test with the intended cable because ground offsets and electromagnetic coupling can alter received voltage and cause intermittent communication errors.

Treat the 250kbps maximum as an upper operating limit rather than a guaranteed rate for every cable, baud rate, and system-ground arrangement. Use the datasheet's driver-load and receiver-threshold specifications when designing the interface. For long cables, electrically noisy machinery, or poorly grounded systems, reduce the communications rate, add compatible filtering where appropriate, and validate signal integrity with an oscilloscope at the connector.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

The commercial 0°C-to-70°C grade is not an automotive qualification. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations require confirmation from current manufacturer product documentation.

Data disahkan pada: 2026-11-09 — data yang disahkan dan disusun semula oleh pasukan kejuruteraan komponen XAIPART

Pencarian Berhubungan

MAX3385ECWN datasheet MAX3385ECWN pinout MAX3385ECWN datasheet pdf MAX3385ECWN specifications MAX3385ECWN 18-SOIC MAX3385ECWN RS-232 transceiver MAX3385ECWN equivalent MAX3385ECWN replacement MAX3385ECWN vs MAX3384ECWN MAX3385ECWN 250kbps transceiver MAX3385ECWN price MAX3385ECWN stock Analog Devices MAX3385ECWN MAX3385ECWN industrial serial interface

Komponen dan Tanda berkaitan

Analog Devices MAX3385ECWN MAX3384ECWN RS-232 true RS-232 transceiver interface IC line driver line receiver EIA/TIA-232 unbalanced serial interface logic-level signal bipolar voltage 3.0V to 5.5V power supply 250kbps data rate ±15kV ESD protection 18-SOIC SOIC package family surface mount charge pump industrial control test and measurement instrumentation data acquisition embedded control legacy peripheral connectivity RS-232 transceiver
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ