Maxim Integrated

MAX339EPE+ - Dual 4:1 CMOS Analog Multiplexer | Maxim Integrated

MPN: MAX339EPE+ ✗ Akhir Hayat
16-pin PDIP Package
MOQ: 1 |

MAX339EPE+ Ringkasan

The Maxim Integrated MAX339EPE+ is an 8-channel and dual 4-channel CMOS analog multiplexer in a 16-pin plastic DIP package. It routes one of eight inputs to a common output or operates as two independent 4:1 muxes, providing analog signal selection for data-acquisition, instrumentation, test, and embedded control systems. The device is designed for low-leakage operation and uses CMOS switching elements to control analog signals.

An analog multiplexer is an interface IC that connects multiple signal sources to a shared processing channel. The MAX339 family combines an 8:1 configuration for the MAX338-style function with two selectable 4:1 sections in the MAX339EPE+. Within the broader hierarchy, the part is an analog switch, then a multiplexer, then an interface IC used to reduce the number of input channels required by an analog-to-digital converter, test instrument, or signal-conditioning system.

The principal architectural benefit is channel consolidation. Instead of routing eight external wires directly to a processor or measurement circuit, a designer can connect eight source signals to the multiplexer and select the required channel at the common output. The dual 4:1 organization provides two independent routing groups, which can simplify layouts where two separate analog buses must each select one source. Its 16-pin PDIP package also supports conventional through-hole assembly and prototyping.

The MAX339EPE+ is categorized as an industrial-temperature-grade component. Its CMOS implementation and low-leakage behavior are important when the multiplexed signals are low amplitude, because leakage through an imperfectly off switch can create an error path between channels. Designers must still evaluate signal amplitude, source impedance, bandwidth, charge injection, switching speed, and the complete off-state leakage path against the accuracy required by the end application.

Typical uses include multiplexed sensor acquisition, automated test equipment, industrial control modules, laboratory measurement systems, communications equipment, and embedded data-acquisition platforms. In each case, the common output is connected to downstream analog circuitry while digital control signals determine which source reaches that output. The multiplexer reduces input wiring and can make a compact analog front end easier to route on a printed circuit board.

PCB design should keep sensitive analog traces away from high-current switching paths and provide a low-impedance ground reference. Decoupling capacitors should be placed near the device's supply and ground pins, while the selected signal source should have a stable reference within the device's input voltage range. Confirm all absolute maximum ratings, logic thresholds, leakage limits, and recommended operating conditions in the manufacturer datasheet before releasing production artwork.

This product record consolidates the verified device classification, package information, sourcing reference, and engineering guidance into one design resource. It also separates confirmed characteristics from parameters that must be checked in the manufacturer datasheet, helping engineers plan the mechanical footprint, interface architecture, and signal-integrity requirements before committing to a PCB design.

Pilihan pengganti yang segera untuk MAX339EPE+ — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

Tiada pilihan pengganti yang segera untuk produk ini.

Minta Alternatif

MAX339EPE+ Spesifikasi

Multiplexer Configuration 8-channel / dual 4-channel
Switch Architecture Dual 4:1
Technology CMOS
Device Type Low-leakage analog multiplexer
Number of Terminals 16
Kemasan 16-pin PDIP
Package Shape Rectangular
Jenis Pemasangan Through hole
Surface Mount No
Temperature Grade Industrial
Number of Mux Sections 2
Channels per Section 4

Panduan Konfigurasi Pin MAX339EPE+ rectangular

Konfigurasi pin untuk MAX339EPE+ (rectangular pakai). Penomeran pin, fungsi, dan garis bentuk koneksi ditakrifkan dalam dokumen pengeluar. Rujuk dokumen untuk kebentuk dan pedoman pengasman.

Garis bentuk pengecah pakai rectangular untuk MAX339EPE+

Tiada data garisan pin yang diperoleh untuk MAX339EPE+.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

MAX339EPE+ patut untuk 6 aplikasis: Multiplexed Data Acquisition, Automated Test Equipment, Industrial Sensor Interface, Laboratory Measurement Systems, Communications Signal Routing, Embedded Control and Monitoring.

📊

Multiplexed Data Acquisition

The MAX339EPE+ is suitable for consolidating several analog inputs into a smaller number of downstream conversion channels. Its two 4:1 sections can each select among four source signals, allowing a board to manage two groups of sensors without routing every source directly to the converter. The 16-pin through-hole package simplifies prototype assembly, although its footprint is larger than a surface-mount alternative. For low-level sensor measurements, verify leakage, on-resistance, input bias behavior, settling time, and logic thresholds in the manufacturer datasheet before fixing the source impedance and acquisition timing.

🏭

Automated Test Equipment

In automated test equipment, the MAX339EPE+ can route several test nodes to shared measurement hardware, reducing the number of analog input connections and simplifying control wiring. Two independent 4:1 sections provide separate routing paths for stimulus, reference, or return signals. Through-hole assembly is useful for laboratory and low-volume fixture boards where serviceability matters. Ensure that the selected channel can present the required bandwidth and amplitude, and confirm that off-state leakage is acceptable relative to the impedance and accuracy of the test path.

🏭

Industrial Sensor Interface

The dual 4:1 architecture of the MAX339EPE+ can select among groups of industrial sensors before their signals reach analog conditioning circuitry. This arrangement reduces repeated connector and analog-front-end channels while retaining separate control paths for the two mux sections. The industrial temperature-grade classification supports use in industrial equipment, subject to confirmation of the exact operating-temperature limits. Because sensor signals may have wide dynamic ranges, verify the input-voltage limits, leakage behavior, switching transients, and ground-reference requirements in the manufacturer datasheet.

🧪

Laboratory Measurement Systems

A laboratory instrument can use the MAX339EPE+ to share analog measurement paths among multiple inputs, while the two 4:1 sections support independent routing of a signal and its reference or return channel. The 16-pin plastic DIP package is compatible with conventional through-hole instrument boards and is straightforward to replace during maintenance. For precision measurements, review the on-resistance contribution to source impedance, off leakage across the complete input network, and channel-switching settling time before choosing sampling rates and amplifier gain.

🌐

Communications Signal Routing

The MAX339EPE+ can serve as a low-frequency analog routing element in communications equipment where multiple receive or monitoring paths must feed a common processing stage. Its two 4:1 sections permit two independent analog selections, while the low-leakage CMOS implementation helps isolate inactive channels. Through-hole packaging favors rugged legacy and industrial designs. Signal integrity depends on the actual bandwidth, capacitance, charge injection, and switching behavior, so use the manufacturer datasheet to verify suitability for the intended frequency and source impedance.

🧩

Embedded Control and Monitoring

Embedded monitoring systems can use the MAX339EPE+ to bring multiple analog conditions into a shared controller or indicator input. Two independently controlled 4:1 groups can select different measurements while reducing the analog input count on the controller. The through-hole PDIP package is practical for controller boards assembled with mixed through-hole components. Validate logic compatibility, startup states, maximum signal excursions, and channel settling behavior in the manufacturer datasheet, especially when the monitored signals can exceed nominal ranges during fault conditions.

What is the MAX339EPE+ used for?
The MAX339EPE+ is a low-leakage CMOS analog multiplexer used to route analog signals from multiple inputs to a common output. It is described as an 8-channel and dual 4-channel device, with two independently selectable 4:1 sections. According to the Maxim Integrated MAX339 datasheet listing, the MAX339 family connects selected inputs to a common output, helping reduce wiring and analog input count in acquisition and test systems.
Is the MAX339EPE+ an 8:1 or a dual 4:1 multiplexer?
The MAX339EPE+ supports an 8-channel and dual 4:1 arrangement, with two independently selectable 4:1 sections. According to the Maxim Integrated MAX339 datasheet listing, the MAX338 is the 8-channel member, while the MAX339 provides the dual 4-channel configuration. Exact control-state tables and enable requirements should be confirmed in the manufacturer datasheet before assigning address or channel-selection logic.
What package does the MAX339EPE+ use?
The MAX339EPE+ uses a 16-pin plastic DIP package and is intended for through-hole assembly. The verified product descriptions identify 16 terminals, a rectangular package shape, and non-surface-mount construction. This makes it suitable for conventional through-hole PCB layouts and prototypes, but it occupies considerably more board area than a comparable surface-mount analog switch.
What is the operating temperature range of MAX339EPE+?
The MAX339EPE+ is identified as an industrial-temperature-grade part, but the numerical operating-temperature limits are not stated in the available product records. Consult the manufacturer datasheet's electrical characteristics and recommended operating conditions before defining the maximum enclosure temperature or designing an industrial system with minimal thermal margin.
What is the on-resistance of the MAX339EPE+?
The numerical on-resistance of the MAX339EPE+ is not stated in the available product records. On-resistance must be checked in the manufacturer datasheet, including its test voltage and temperature, because it affects insertion loss, source-impedance requirements, channel-error voltage, and the suitability of the mux for high-impedance sensors.
Where can I download the MAX339EPE+ datasheet PDF?
The MAX339EPE+ datasheet document can be reached through the listed MAX339 datasheet page, while the manufacturer product documentation should be used for final design release. According to the MAX339 family description, the document covers the MAX338 and MAX339 CMOS analog multiplexers. Verify the document revision and its MAX339EPE+ ordering information before applying the electrical limits.
Where is the MAX339EPE+ pinout located?
The MAX339EPE+ pinout is located in the pin-description and configuration sections of the manufacturer datasheet, together with its truth table and typical application diagrams. The device has 16 terminals in a plastic DIP package. Use the datasheet pin-description table when assigning address inputs, enable controls, common outputs, supply rails, and ground connections on the PCB.
How should the MAX339EPE+ be used in a data-acquisition circuit?
Connect the analog sources to the appropriate mux inputs, route each common output toward the downstream converter or measurement circuit, and drive the section and channel-selection controls from suitable logic. The MAX339EPE+ provides two 4:1 sections, allowing two selectable signal groups to share common output paths. Confirm logic thresholds, bandwidth, charge injection, and input limits in the manufacturer datasheet before sampling low-amplitude signals.
Can MAX339EPE+ replace another 16-pin dual 4:1 multiplexer?
A replacement is only valid if it matches the MAX339EPE+ in package, pinout, logic levels, channel architecture, voltage ratings, bandwidth, leakage, and on-resistance. No specific drop-in replacement is established by the available cross-reference results. Compare the candidate pin-description table and electrical characteristics with the Maxim Integrated datasheet, then verify every unused and control terminal during qualification.
What is the best drop-in replacement for MAX339EPE+?
The best drop-in replacement is the device that preserves the 16-pin DIP footprint and implements the same two 4:1 channel assignments and control logic. No candidate with verified pin compatibility and quantified parametric equivalence is identified in the available cross-reference material. Request current lifecycle information, then compare absolute maximum ratings, leakage, on-resistance, switching time, and logic thresholds before substitution.
When should I choose MAX339EPE+ instead of a single 4:1 analog switch?
Choose the MAX339EPE+ when the design needs two independently selectable analog groups and can accept a 16-pin through-hole package. It consolidates two 4:1 routing sections into one device while preserving one common output per section. A discrete single 4:1 switch may be preferable when only one channel group is required, the board area is constrained, or a surface-mount package is needed.
Is MAX339EPE+ suitable for low-leakage instrumentation?
The MAX339EPE+ is specifically described as a low-leakage CMOS analog multiplexer, making it a candidate for precision measurement and instrumentation. Suitability still depends on the absolute leakage specification, source impedance, signal bandwidth, settling time, and required measurement accuracy. Use the manufacturer datasheet limits and evaluate the complete source-and-measurement path rather than relying on the product classification alone.
What is the power and thermal consideration for MAX339EPE+?
The MAX339EPE+ is a CMOS interface IC in a 16-pin plastic DIP package, so its supply dissipation is generally modest compared with power semiconductors. Exact supply current, thermal resistance, and maximum junction temperature are not stated in the available product records. Confirm those values in the manufacturer datasheet and provide normal copper and airflow conditions for the chosen through-hole layout.
Where can I buy MAX339EPE+ and check current lead time?
Use the Request a Quote form on this page to ask about MAX339EPE+ availability, current lead time, and acceptable order quantities. The part is associated with an obsolete-market status, so supply can be limited and lot-to-lot sourcing may require planning. Request date code, traceability, packaging condition, and quality documentation before placing a production order.
What is the lifecycle status and RoHS compliance of MAX339EPE+?
The MAX339EPE+ is associated with an obsolete-market lifecycle status, while its RoHS and REACH compliance declarations are not confirmed in the available records. Do not infer current compliance from the package type or legacy listing. Obtain the latest manufacturer environmental declaration or material compliance report for the exact ordered part before using it in a new regulated design.

Data referensi kejuruteraan untuk MAX339EPE+ — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose the MAX339EPE+ when a system needs two independently selectable 4:1 analog routing sections and can accommodate a 16-pin through-hole DIP package. Its dual 4:1 organization is useful for consolidating sensor, test, or instrumentation inputs while retaining separate routing paths. The low-leakage CMOS construction makes it a candidate for sensitive analog systems, subject to checking the absolute leakage and on-resistance limits against the actual source impedance. A discrete 4:1 switch may be more appropriate when only one routing section is needed or when surface-mount area is constrained. A different 16-pin dual multiplexer should not be treated as interchangeable until its pinout, logic levels, channel assignments, bandwidth, leakage, and voltage limits have been verified. Because lifecycle supply is limited, confirm availability and sourcing quality before committing the device to a new design.

Perbandingan dengan Gantian

Parametr Produk Ini
Brand Maxim Integrated
Package 16-pin PDIP
Multiplexer Configuration 8-channel / dual 4-channel
Switch Architecture Dual 4:1
Technology CMOS
Number of Terminals 16
Mounting Type Through hole
Temperature Grade Industrial

Catatan Desain

Treat every mux input as a source with finite bandwidth rather than an ideal wire. Confirm the MAX339EPE+ on-resistance, input capacitance, switching time, and off leakage against the source impedance and required measurement bandwidth. Use short traces, a continuous ground reference, and a ground return close to the analog path to minimize pickup. If a high-impedance sensor is used, include the switch leakage and board contamination in the error budget before selecting the external amplifier gain.

Assign the common outputs and control pins by following the manufacturer pin-description table and truth table rather than inferring functions from the dual 4:1 architecture. Keep digital select traces away from sensitive analog inputs, provide a solid ground plane, and place supply bypass capacitors at the device pins. Because this is a 16-pin through-hole package, check component clearance and lead bending against the mechanical drawing before placing the IC on tightly spaced boards.

Do not assume that the package pin count alone makes another multiplexer a drop-in replacement. A valid substitute must reproduce the 16-pin PDIP footprint, channel assignments, control logic, supply polarity, logic thresholds, and electrical limits. Also avoid exceeding the input and supply absolute maximum ratings during power-up or fault conditions. Confirm the obsolete-market sourcing plan, traceable date code, and environmental documentation before committing to a new production design.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

The available product records identify an industrial temperature grade but do not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals declarations.

Data disahkan pada: 2026-11-14 — data yang disahkan dan disusun semula oleh pasukan kejuruteraan komponen XAIPART

Pencarian Berhubungan

MAX339EPE+ datasheet MAX339EPE+ pinout MAX339EPE+ datasheet pdf MAX339EPE+ equivalent MAX339EPE+ replacement MAX339EPE+ cross reference MAX339EPE+ footprint MAX339EPE+ application circuit MAX339EPE+ price MAX339EPE+ stock Maxim Integrated MAX339EPE+ dual 4:1 CMOS analog multiplexer

Komponen dan Tanda berkaitan

Maxim Integrated MAX339EPE+ MAX339 analog multiplexer analog switch CMOS dual 4:1 multiplexer 8-channel multiplexer multiplexer switch low-leakage switch PDIP 16-pin DIP through-hole package rectangular package industrial temperature grade common output channel selection signal routing data acquisition test and measurement industrial control sensing interface
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ