MAX339EPE+ - Dual 4:1 CMOS Analog Multiplexer | Maxim Integrated
N.º da peça: MAX339EPE+ ✗ Fim de vidaMAX339EPE+ Visão geral
An analog multiplexer is an interface IC that connects multiple signal sources to a shared processing channel. The MAX339 family combines an 8:1 configuration for the MAX338-style function with two selectable 4:1 sections in the MAX339EPE+. Within the broader hierarchy, the part is an analog switch, then a multiplexer, then an interface IC used to reduce the number of input channels required by an analog-to-digital converter, test instrument, or signal-conditioning system.
The principal architectural benefit is channel consolidation. Instead of routing eight external wires directly to a processor or measurement circuit, a designer can connect eight source signals to the multiplexer and select the required channel at the common output. The dual 4:1 organization provides two independent routing groups, which can simplify layouts where two separate analog buses must each select one source. Its 16-pin PDIP package also supports conventional through-hole assembly and prototyping.
The MAX339EPE+ is categorized as an industrial-temperature-grade component. Its CMOS implementation and low-leakage behavior are important when the multiplexed signals are low amplitude, because leakage through an imperfectly off switch can create an error path between channels. Designers must still evaluate signal amplitude, source impedance, bandwidth, charge injection, switching speed, and the complete off-state leakage path against the accuracy required by the end application.
Typical uses include multiplexed sensor acquisition, automated test equipment, industrial control modules, laboratory measurement systems, communications equipment, and embedded data-acquisition platforms. In each case, the common output is connected to downstream analog circuitry while digital control signals determine which source reaches that output. The multiplexer reduces input wiring and can make a compact analog front end easier to route on a printed circuit board.
PCB design should keep sensitive analog traces away from high-current switching paths and provide a low-impedance ground reference. Decoupling capacitors should be placed near the device's supply and ground pins, while the selected signal source should have a stable reference within the device's input voltage range. Confirm all absolute maximum ratings, logic thresholds, leakage limits, and recommended operating conditions in the manufacturer datasheet before releasing production artwork.
This product record consolidates the verified device classification, package information, sourcing reference, and engineering guidance into one design resource. It also separates confirmed characteristics from parameters that must be checked in the manufacturer datasheet, helping engineers plan the mechanical footprint, interface architecture, and signal-integrity requirements before committing to a PCB design.
Alternativas drop-in para MAX339EPE+ — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Nenhuma alternativa drop-in disponível para este produto.
Solicitar alternativasMAX339EPE+ Especificações
| Multiplexer Configuration | 8-channel / dual 4-channel |
| Switch Architecture | Dual 4:1 |
| Technology | CMOS |
| Device Type | Low-leakage analog multiplexer |
| Number of Terminals | 16 |
| Encapsulamento | 16-pin PDIP |
| Package Shape | Rectangular |
| Tipo de montagem | Through hole |
| Surface Mount | No |
| Temperature Grade | Industrial |
| Number of Mux Sections | 2 |
| Channels per Section | 4 |
Guia de Configuração de Pinos do MAX339EPE+ rectangular
Configuração de pinos para MAX339EPE+ (pacote rectangular). A numeração dos pinos, funções e diagramas de conexão estão definidos no datasheet do fabricante. Consulte-o para o footprint exato e diretrizes de soldagem.
Nenhum dado detalhado de pinagem disponível para MAX339EPE+.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
MAX339EPE+ é adequado para 6 aplicaçãos: Multiplexed Data Acquisition, Automated Test Equipment, Industrial Sensor Interface, Laboratory Measurement Systems, Communications Signal Routing, Embedded Control and Monitoring.
Multiplexed Data Acquisition
The MAX339EPE+ is suitable for consolidating several analog inputs into a smaller number of downstream conversion channels. Its two 4:1 sections can each select among four source signals, allowing a board to manage two groups of sensors without routing every source directly to the converter. The 16-pin through-hole package simplifies prototype assembly, although its footprint is larger than a surface-mount alternative. For low-level sensor measurements, verify leakage, on-resistance, input bias behavior, settling time, and logic thresholds in the manufacturer datasheet before fixing the source impedance and acquisition timing.
Recomendado
Automated Test Equipment
In automated test equipment, the MAX339EPE+ can route several test nodes to shared measurement hardware, reducing the number of analog input connections and simplifying control wiring. Two independent 4:1 sections provide separate routing paths for stimulus, reference, or return signals. Through-hole assembly is useful for laboratory and low-volume fixture boards where serviceability matters. Ensure that the selected channel can present the required bandwidth and amplitude, and confirm that off-state leakage is acceptable relative to the impedance and accuracy of the test path.
Recomendado
Industrial Sensor Interface
The dual 4:1 architecture of the MAX339EPE+ can select among groups of industrial sensors before their signals reach analog conditioning circuitry. This arrangement reduces repeated connector and analog-front-end channels while retaining separate control paths for the two mux sections. The industrial temperature-grade classification supports use in industrial equipment, subject to confirmation of the exact operating-temperature limits. Because sensor signals may have wide dynamic ranges, verify the input-voltage limits, leakage behavior, switching transients, and ground-reference requirements in the manufacturer datasheet.
Recomendado
Laboratory Measurement Systems
A laboratory instrument can use the MAX339EPE+ to share analog measurement paths among multiple inputs, while the two 4:1 sections support independent routing of a signal and its reference or return channel. The 16-pin plastic DIP package is compatible with conventional through-hole instrument boards and is straightforward to replace during maintenance. For precision measurements, review the on-resistance contribution to source impedance, off leakage across the complete input network, and channel-switching settling time before choosing sampling rates and amplifier gain.
Recomendado
Communications Signal Routing
The MAX339EPE+ can serve as a low-frequency analog routing element in communications equipment where multiple receive or monitoring paths must feed a common processing stage. Its two 4:1 sections permit two independent analog selections, while the low-leakage CMOS implementation helps isolate inactive channels. Through-hole packaging favors rugged legacy and industrial designs. Signal integrity depends on the actual bandwidth, capacitance, charge injection, and switching behavior, so use the manufacturer datasheet to verify suitability for the intended frequency and source impedance.
Recomendado
Embedded Control and Monitoring
Embedded monitoring systems can use the MAX339EPE+ to bring multiple analog conditions into a shared controller or indicator input. Two independently controlled 4:1 groups can select different measurements while reducing the analog input count on the controller. The through-hole PDIP package is practical for controller boards assembled with mixed through-hole components. Validate logic compatibility, startup states, maximum signal excursions, and channel settling behavior in the manufacturer datasheet, especially when the monitored signals can exceed nominal ranges during fault conditions.
Recomendado
Dados de referência de engenharia para MAX339EPE+ — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto |
|---|---|
| Brand | Maxim Integrated |
| Package | 16-pin PDIP |
| Multiplexer Configuration | 8-channel / dual 4-channel |
| Switch Architecture | Dual 4:1 |
| Technology | CMOS |
| Number of Terminals | 16 |
| Mounting Type | Through hole |
| Temperature Grade | Industrial |
Notas de projeto
Treat every mux input as a source with finite bandwidth rather than an ideal wire. Confirm the MAX339EPE+ on-resistance, input capacitance, switching time, and off leakage against the source impedance and required measurement bandwidth. Use short traces, a continuous ground reference, and a ground return close to the analog path to minimize pickup. If a high-impedance sensor is used, include the switch leakage and board contamination in the error budget before selecting the external amplifier gain.
Assign the common outputs and control pins by following the manufacturer pin-description table and truth table rather than inferring functions from the dual 4:1 architecture. Keep digital select traces away from sensitive analog inputs, provide a solid ground plane, and place supply bypass capacitors at the device pins. Because this is a 16-pin through-hole package, check component clearance and lead bending against the mechanical drawing before placing the IC on tightly spaced boards.
Do not assume that the package pin count alone makes another multiplexer a drop-in replacement. A valid substitute must reproduce the 16-pin PDIP footprint, channel assignments, control logic, supply polarity, logic thresholds, and electrical limits. Also avoid exceeding the input and supply absolute maximum ratings during power-up or fault conditions. Confirm the obsolete-market sourcing plan, traceable date code, and environmental documentation before committing to a new production design.
Informações de conformidade
The available product records identify an industrial temperature grade but do not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals declarations.