Analog Devices

MAX365CSE+ - Quad SPST Analog Switch | Analog Devices

MPN: MAX365CSE+ ✓ Aktif
85 ohm maximum Rds(on) 16-pin SOIC Package
MOQ: 1 |

MAX365CSE+ Ringkasan

The Analog Devices MAX365CSE+ is a precision, quad, single-pole single-throw analog switch with four normally open channels, an 85 ohm on-resistance specification, and a 16-pin SOIC package. It is designed for routing low-voltage analog signals while maintaining low channel-to-channel resistance variation and a flat on-resistance characteristic across the signal range.

An analog switch is a semiconductor device that connects or disconnects an analog signal path under digital control. The MAX365 belongs to the analog switch hierarchy within interface ICs and signal-routing semiconductors. Unlike a mechanical relay, it can change connection states electronically with compact packaging and low external component requirements. The MAX365 is specifically configured as four normally open SPST switches, making each channel independent when the device supports separate control inputs.

The MAX365 family provides on-resistance below 85 ohms across the analog signal range, with channel matching within 2 ohms and maximum on-resistance variation of 9 ohms. These characteristics help minimize signal attenuation and gain errors when different channels are selected in sequence. The four-channel architecture also allows one package to replace multiple individual switch functions in signal-routing designs.

The manufacturer describes the MAX365 as a precision quad SPST analog switch with low on-resistance, low leakage, and power-off isolation. A 250 ns switching figure is associated with the device. Because the MAX365CSE+ uses normally open contacts, each switched path is disconnected until its corresponding control signal activates the channel. The exact supply-voltage range, control thresholds, leakage limits, and detailed timing conditions should be confirmed in the manufacturer data sheet before final circuit design.

Typical uses include battery-powered test equipment, data-acquisition systems, analog signal multiplexing, precision measurement circuits, and industrial control interfaces. The device can also isolate signal sources when power is absent or when a system requires a controlled connection rather than a permanently closed path. Its 16-pin SOIC package supports conventional surface-mount assembly and compact board layouts.

PCB design should keep each switched signal trace short and place input and output routing away from fast digital control or switching nodes. Verify the logic levels and supply rails against the manufacturer data sheet, especially in mixed 3.3 V and 5 V systems. Confirm whether normally open behavior is required, rather than selecting a normally closed alternative, because the open and closed families provide different default signal paths.

This page combines the MAX365 family specifications, package information, application guidance, and pin-compatible family comparisons to support faster component selection and PCB design. It also organizes sourcing questions, replacement options, and practical implementation considerations around the exact MAX365CSE+ ordering code.

Pilihan pengganti yang segera untuk MAX365CSE+ — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

MAX365CSE

✅ Masuk Drop-In
📦 16-pin SOIC
Same 85 ohm MAX365 four-channel normally open SPST architecture; ordering suffix differs by 0% in on-resistance, 0% in channel count, and 0% in channel matching

📋 Alternatif rujukan (tidak dalam katalog)

MAX365EESE+

✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 16-pin SOIC
Same 85 ohm four-channel normally open SPST architecture and 16-pin SOIC pinout; temperature-grade designation differs while core switch parameters remain unchanged

📋 Alternatif rujukan (tidak dalam katalog)

MAX365AESE+

✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 16-pin SOIC
Same 85 ohm four-channel normally open SPST architecture and 16-pin SOIC pinout; automotive ordering designation differs while core switch parameters remain unchanged

📋 Alternatif rujukan (tidak dalam katalog)

MAX365CSE+ Penilaian maksimum & Ciri-ciri Elektrik

Switch Type Single-pole single-throw (SPST)
Number of Channels 4 circuits
Switch Configuration 4 normally open (NO) channels
On-Resistance 85 ohm maximum
On-Resistance Matching Within 2 ohm between channels
On-Resistance Variation 9 ohm maximum across the analog signal range
Switching Time 250 ns
Power-Off Isolation Supported
Kemasan 16-pin SOIC
Package Code SOP
Package Shape Rectangular
Jenis Pemasangan Surface mount
Temperature Grade Commercial
Number of Terminals 16

Panduan Konfigurasi Pin MAX365CSE+ rectangular

Konfigurasi pin untuk MAX365CSE+ (rectangular pakai). Penomeran pin, fungsi, dan garis bentuk koneksi ditakrifkan dalam dokumen pengeluar. Rujuk dokumen untuk kebentuk dan pedoman pengasman.

Garis bentuk pengecah pakai rectangular untuk MAX365CSE+

Tiada data garisan pin yang diperoleh untuk MAX365CSE+.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

MAX365CSE+ patut untuk 6 aplikasis: Data Acquisition Signal Multiplexing, Battery-Powered Test Equipment, Precision Measurement Interfaces, Analog Signal Routing, Industrial Control Interfaces, Automated Test Fixtures.

🖥️

Data Acquisition Signal Multiplexing

The MAX365CSE+ fits four-channel analog signal multiplexing when the instrument must route several sensor or test-node signals into a shared measurement path. Each normally open SPST section can connect one selected source without affecting the other paths, while the 85 ohm maximum on-resistance and matching within 2 ohms help limit channel-dependent attenuation. Engineers should include the switch resistance in the source-impedance and amplifier-gain calculation, then verify settling behavior against the 250 ns switching figure and system bandwidth.

🧪

Battery-Powered Test Equipment

The MAX365CSE+ is useful in battery-powered test equipment where isolated analog paths, low external component count, and compact surface-mount construction help control board area. The four normally open channels can connect external test inputs only when requested, avoiding an unintended connection between the fixture and instrument circuitry. Power-off isolation provides an additional design consideration when the source and equipment grounds may not share a common reference, although leakage and supply limits must be checked for the operating voltage.

📏

Precision Measurement Interfaces

The MAX365CSE+ suits precision measurement interfaces that switch between resistive, voltage, or instrumentation-amplifier inputs. Its maximum on-resistance of 85 ohms, on-resistance matching within 2 ohms, and maximum variation of 9 ohms help reduce errors that would otherwise appear as gain differences between channels. Because the switch contributes to the complete signal path, the amplifier input impedance and sensor impedance should be evaluated together with the switch specifications to determine the resulting loading and measurement uncertainty.

🌐

Analog Signal Routing

The MAX365CSE+ provides compact analog routing for circuits that must connect a source to one of several downstream destinations or isolate a path during a test sequence. Four independent normally open SPST channels offer a straightforward alternative to multiple discrete relays when switching speed and board area are priorities. Layout should minimize trace length around the switched nodes and keep control signals away from sensitive analog conductors, reducing capacitive coupling into the switched path.

🏭

Industrial Control Interfaces

The MAX365CSE+ can route low-voltage analog command or feedback signals in industrial control equipment while keeping the implementation within a 16-pin SOIC footprint. Its normally open behavior is useful when a default disconnected state is safer or more convenient than a permanently connected path. For equipment exposed to temperature variation, electrical noise, or long wiring runs, select the appropriate family temperature grade and verify control thresholds and leakage against the actual industrial environment.

🔧

Automated Test Fixtures

The MAX365CSE+ is appropriate for automated fixtures that must connect test signals only during a commanded measurement interval. The normally open topology prevents the DUT path from remaining connected when the channel is inactive, and four channels can manage several fixture nodes within one package. The 250 ns switching figure supports relatively fast state changes, but fixture capacitance, cable length, and the required settling time must be included in the complete timing budget.

Ringkasan Produk Disebarkan

MAX365CSE Equivalent 16-pin SOIC MAX365 family option Dipergunakan di: Data Acquisition Signal Multiplexing, Battery-Powered Test Equipment, Precision Measurement Interfaces, Analog Signal Routing, Industrial Control Interfaces, Automated Test Fixtures MAX365EESE+ Extended-temperature MAX365 family option Dipergunakan di: Data Acquisition Signal Multiplexing, Precision Measurement Interfaces, Industrial Control Interfaces MAX365AESE+ Automotive-qualified MAX365 family option Dipergunakan di: Battery-Powered Test Equipment, Analog Signal Routing, Automated Test Fixtures
What is the MAX365CSE+ used for?
The MAX365CSE+ is a precision, four-channel SPST analog switch used to connect and disconnect low-voltage analog signals. Each of its four switches is normally open, so the corresponding path remains disconnected until commanded. According to the Analog Devices MAX365 product documentation, the device provides an 85 ohm on-resistance specification, on-resistance matching within 2 ohms between channels, and a maximum variation of 9 ohms across the analog signal range.
How many channels and pins does MAX365CSE+ have?
The MAX365CSE+ contains four independent analog-switch channels in a 16-pin SOIC package. The device is specified as four normally open single-pole single-throw switches rather than a multiplexed array. The manufacturer product page and distributor catalog descriptions identify the exact MAX365CSE+ ordering code as a 16-SOIC, surface-mount, commercial-temperature component.
What is the on-resistance of the MAX365CSE+?
The MAX365CSE+ is specified with an on-resistance of 85 ohms maximum. The MAX365 family also guarantees matching within 2 ohms between channels and limits on-resistance variation to 9 ohms maximum over the analog signal range. These figures matter in multiplexed analog paths because resistance differences can create channel-dependent signal attenuation. Confirm the test conditions in the manufacturer data sheet when calculating worst-case error.
Is the MAX365CSE+ normally open or normally closed?
The MAX365CSE+ has four normally open SPST channels. In the default state, each switched path is open, and the corresponding control signal connects the terminal to its switched node. The related MAX364 family uses normally closed contacts instead. According to the Analog Devices MAX365 documentation, the choice between normally open and normally closed behavior defines the signal path present when control power or the control command is absent.
Where can I download the MAX365CSE+ datasheet PDF?
The official MAX365 documentation is available from the Analog Devices product page linked on this page. That page provides the manufacturer data sheet and product-selection information for the MAX364 and MAX365 precision quad SPST families. Engineers should use the MAX365 data sheet for electrical limits, timing conditions, control logic, and the complete pin-description table when assigning PCB tracks.
Where can I find the MAX365CSE+ pinout?
Use the pin-description table and package drawing in the official Analog Devices MAX365 data sheet to locate every MAX365CSE+ connection. The component is a 16-pin SOIC, but the four control inputs, four switched paths, supply pins, and any no-connect positions must be assigned from the manufacturer pin table rather than inferred from function. This prevents a control or switched terminal from being assigned to the wrong package position.
Where can I buy MAX365CSE+ and request a quote?
Use the Request a Quote form on this page to request MAX365CSE+ availability, commercial terms, and a current quotation for the exact ordering code. The form is the appropriate route for checking current stock, minimum order quantity, lead time, and volume pricing without relying on a potentially stale catalog entry. Confirm the requested suffix and 16-pin SOIC package before approving the order.
What is the price of MAX365CSE+?
The current MAX365CSE+ quotation is available through the Request a Quote form on this page. The form can provide a quantity-specific response for the exact MAX365CSE+ ordering code rather than a family-level or non-qualified catalog figure. For production planning, include the required order quantity, delivery location, target date, and whether factory-tape packaging is needed in the request.
What is the lead time and stock status of MAX365CSE+?
Current stock, minimum order quantity, and lead time for MAX365CSE+ should be confirmed through the Request a Quote form on this page. The manufacturer lists the MAX365 family as production, but exact assembly and distribution availability can vary by ordering code, quantity, and shipment destination. Submit the requested quantity and schedule so the commercial response reflects the actual production requirement.
What is the best drop-in replacement for MAX365CSE+?
MAX365CSE, MAX365EESE+, and MAX365AESE+ are the closest documented same-family drop-in options for MAX365CSE+ because they retain the MAX365 four-channel, normally open SPST architecture and 16-pin SOIC interface. Their temperature grade or lead-free ordering designation may differ, so the replacement should be selected for the required environmental class. Confirm pin and control compatibility against the manufacturer data sheet before production use.
Can MAX365CSE replace MAX365CSE+?
The MAX365CSE can provide the same basic MAX365 four-channel, normally open SPST function in the 16-pin SOIC package, but its ordering suffix does not match the lead-free MAX365CSE+ designation. A substitution may therefore change procurement qualification, traceability, or environmental-temperature requirements even though the functional family is the same. Review the suffix-specific product table and obtain approval for the exact replacement before using it.
When should I choose MAX365CSE+ over MAX364CSE+?
Choose MAX365CSE+ when the circuit requires normally open switch contacts, meaning a path is disconnected until its control input is asserted. Choose MAX364CSE+ when the default path must be connected and should open only after a control command. The two families share the quad SPST and 16-pin SOIC architecture, but their default contact states are functionally different and cannot be treated as interchangeable without circuit review.
What is the difference between MAX365CSE+ and MAX365EESE+?
The MAX365CSE+ is the commercial-temperature ordering option, while MAX365EESE+ belongs to the extended-temperature ordering family. Both retain the MAX365 precision, quad, normally open SPST function in a 16-pin SOIC package. The practical difference is the environmental qualification and possibly the ordering suffix, so MAX365EESE+ is the more relevant choice when operation outside the commercial temperature range is required.
Is MAX365CSE+ suitable for precision analog measurement?
The MAX365CSE+ is suitable for precision analog-routing applications where compact SPST switching and controlled on-resistance are important. Its 85 ohm maximum on-resistance, 2 ohm channel matching, and 9 ohm maximum variation provide useful limits for calculating path error across four channels. The overall measurement accuracy also depends on source impedance, leakage, switch timing, temperature, and the selected instrumentation amplifier.
What are the key specifications engineers should know about MAX365CSE+?
The key MAX365CSE+ specifications are four normally open SPST channels, an 85 ohm maximum on-resistance, on-resistance matching within 2 ohms, maximum on-resistance variation of 9 ohms, a 250 ns switching figure, and a 16-pin SOIC package. The device also provides power-off isolation. Exact supply limits, control thresholds, leakage currents, and operating-temperature boundaries must be taken from the manufacturer data sheet.

Data referensi kejuruteraan untuk MAX365CSE+ — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose MAX365CSE+ for commercial-temperature equipment that requires four normally open SPST analog paths in a 16-pin SOIC package. Its 85 ohm maximum on-resistance, matching within 2 ohms, and maximum variation of 9 ohms make it suitable when channel-dependent resistance must be included in the error budget. MAX365CSE is the closest same-package functional option when the lead-free ordering designation is not required. Choose MAX365EESE+ when extended-temperature operation is needed, or MAX365AESE+ for an automotive-qualified family option. These parts are preferable to the MAX364 family only when normally open behavior is desired; MAX364 uses normally closed contacts and therefore creates a different default signal path. Before finalizing any replacement, confirm the pin assignment, control thresholds, leakage, supply range, and environmental qualification in the manufacturer data sheet.

Perbandingan dengan Gantian

Parametr Produk Ini MAX365CSE MAX365EESE+ MAX365AESE+
Brand Analog Devices Analog Devices Analog Devices Analog Devices
Package 16-pin SOIC 16-pin SOIC - same 16-pin SOIC - same 16-pin SOIC - same
Switch Type Quad SPST Quad SPST Quad SPST Quad SPST
Number of Channels 4 circuits 4 circuits 4 circuits 4 circuits
Default Contact State Normally open Normally open Normally open Normally open
On-Resistance 85 ohm maximum 85 ohm maximum 85 ohm maximum 85 ohm maximum
On-Resistance Matching Within 2 ohm between channels Within 2 ohm between channels Within 2 ohm between channels Within 2 ohm between channels
On-Resistance Variation 9 ohm maximum 9 ohm maximum 9 ohm maximum 9 ohm maximum
Switching Time 250 ns 250 ns 250 ns 250 ns
Power-Off Isolation Supported Supported Supported Supported
Mounting Type Surface mount Surface mount Surface mount Surface mount

Penyeberangsung Jelas

  • Four independent normally open channels in one package (vsMAX365CSE)
  • Broader environmental option within the same footprint (vsMAX365CSE)
  • Automotive-family sourcing option without package conversion (vsMAX365CSE)

Catatan Desain

Treat the switched analog path as a resistance in series with the source. The MAX365CSE+ is specified with 85 ohm maximum on-resistance, so include that value in the source-loading and amplifier-gain calculations. Use the 2 ohm channel-matching and 9 ohm maximum variation limits when evaluating channel-dependent error, and verify that the selected downstream amplifier presents sufficiently high input impedance.

Place the MAX365CSE+ close to the source and destination pads so the switched path remains short. Route sensitive analog traces away from digital control inputs, clock-like signals, and other high-impedance nodes. Because a 16-pin SOIC provides limited spacing between channels, maintain clearance between adjacent switched nets and ground the unused PCB area conservatively to reduce coupling.

Do not substitute the normally closed MAX364 family when the circuit depends on the MAX365 default open state. A common footprint does not guarantee equivalent system behavior: the contact state before control is asserted changes whether a test source, sensor, or signal node is connected. Confirm the control logic, supply levels, leakage, and operating-temperature grade against the manufacturer data sheet before releasing the PCB.

Confirm the control-signal voltage levels and the device supply requirements before connecting external logic. The four control inputs may be driven from a different logic family, but mixed 3.3 V and 5 V systems require the actual input thresholds from the manufacturer data sheet. A 250 ns switching figure does not by itself guarantee that the analog node has settled; include output capacitance, source impedance, and measurement bandwidth in timing analysis.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

The MAX365 family documentation identifies the device as precision, quad, normally open SPST analog switches. Family-specific RoHS, REACH, halogen-free, conflict-minerals, and automotive qualification statements were not present for MAX365CSE+, so these fields remain unknown or not applicable as appropriate.

Data disahkan pada: 2026-11-19 — data yang disahkan dan disusun semula oleh pasukan kejuruteraan komponen XAIPART

Pencarian Berhubungan

MAX365CSE+ datasheet MAX365CSE+ datasheet pdf MAX365CSE+ pinout MAX365CSE+ specifications MAX365CSE+ equivalent MAX365CSE+ replacement MAX365CSE+ cross reference MAX365CSE+ vs MAX365CSE MAX365CSE+ price MAX365CSE+ stock Analog Devices MAX365CSE+ MAX365CSE 16 pin SOIC pinout

Komponen dan Tanda berkaitan

Analog Devices MAX365CSE+ MAX365CSE MAX365EESE+ MAX365AESE+ MAX365 MAX364 analog switch SPST switch normally open switch interface IC signal-routing semiconductor precision analog switch on-resistance channel matching power-off isolation 16-pin SOIC SOIC package family surface-mount package data acquisition test equipment industrial control precision measurement on-resistance variation
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ