Analog Devices

MAX389EPN+ - 4:1 Differential Multiplexer | Analog Devices

MPN: MAX389EPN+ ✗ Akhir Hayat
3 kOhm Rds(on) 18-pin PDIP Package
MOQ: 1 |

MAX389EPN+ Ringkasan

The Analog Devices MAX389EPN+ is a dual 4:1 analog multiplexer IC with an on-resistance of 3 kOhm, supplied in an 18-pin PDIP package. It is designed as a differential multiplexer for routing analog signals while adding the fault-protection function identified in the MAX389 family documentation. The device belongs to the interface IC hierarchy and provides a practical way to connect multiple signal sources to downstream analog measurement or control circuitry.

An analog multiplexer is an interface IC that selects one of several input paths and connects it to an output. A 4:1 configuration gives the MAX389EPN+ four input positions per internal switch, while the two-circuit designation identifies the two switching sections used by this differential implementation. This arrangement can reduce the number of separate signal paths required in instrumentation, test systems, and other analog-routing designs.

The primary verified characteristics of the MAX389EPN+ are its dual-circuit organization, 4:1 multiplexing ratio, 3 kOhm on resistance, differential operating arrangement, industrial temperature grade, and 18-pin PDIP construction. The PDIP format uses through-hole mounting and provides generous pin spacing for laboratory, industrial control, educational, and legacy equipment designs where surface-mount assembly is not required.

The MAX389 family documentation identifies these devices as high-voltage, fault-protected analog multiplexers. That positioning makes signal-path protection an important part of circuit planning because the selected switch must tolerate the voltage and fault conditions present in the intended system. Engineers should use the manufacturer datasheet for the complete absolute maximum ratings, switching characteristics, channel configuration, control logic, and truth table before finalizing a high-energy analog front end.

Typical uses include routing differential sensor signals, selecting test points in automated measurement systems, multiplexing analog channels in industrial control equipment, and connecting external instrumentation to a shared processing chain. Because the verified information identifies a differential 4:1 architecture, the part is particularly relevant to circuits that need paired signal routing rather than a single-ended selector.

PCB design should preserve the through-hole footprint of the 18-pin PDIP package and route sensitive analog traces away from switching nodes and other high-energy circuitry. Confirm the exact pin numbering, control inputs, common-mode limits, and maximum signal voltage in the manufacturer datasheet before fabrication.

This page combines the verified device identity, package and switching characteristics with drop-in comparison information and practical guidance for industrial analog-routing designs. It distinguishes confirmed specifications from parameters that must be checked directly in the MAX389EPN+ datasheet.

Pilihan pengganti yang segera untuk MAX389EPN+ — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

MAX389CPN+

✅ Masuk Drop-In
📦 PDIP
Same PDIP package and documented consistent terminals and main functional characteristics; device-specific ratings and timing should still be compared in the manufacturer datasheets

📋 Alternatif rujukan (tidak dalam katalog)

MAX389EPN+ Spesifikasi

Number of Circuits 2 circuits
Multiplexer Configuration 4:1
On Resistance 3 kOhm
Switch Type Differential analog multiplexer
Number of Terminals 18 terminals
Kemasan 18-pin PDIP
Package Code DIP
Package Shape Rectangular
Jenis Pemasangan Through hole
Surface Mount No
Temperature Grade Industrial
Protection Function Fault-protected
Product Category Analog switch and multiplexer interface IC
Manufacturer Analog Devices / Maxim Integrated

Panduan Konfigurasi Pin MAX389EPN+ rectangular

Konfigurasi pin untuk MAX389EPN+ (rectangular pakai). Penomeran pin, fungsi, dan garis bentuk koneksi ditakrifkan dalam dokumen pengeluar. Rujuk dokumen untuk kebentuk dan pedoman pengasman.

Garis bentuk pengecah pakai rectangular untuk MAX389EPN+

Tiada data garisan pin yang diperoleh untuk MAX389EPN+.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

MAX389EPN+ patut untuk 6 aplikasis: Industrial Analog Sensor Routing, Automated Test Signal Multiplexing, Laboratory Instrumentation, Process Control Signal Conditioning, Data Acquisition Front Ends, Communication and RF Test Systems.

🏭

Industrial Analog Sensor Routing

The MAX389EPN+ fits industrial analog-routing designs that require two differential 4:1 switching sections in an 18-pin PDIP package. Its 3 kOhm on resistance and fault-protected family architecture are useful when selecting among several sensor or conditioning outputs before an amplifier, controller, or data-conversion stage. The through-hole package also suits long-life industrial control equipment that is assembled or serviced without fine-pitch surface-mount tools. Before final circuit release, verify signal-voltage limits, control levels, and channel timing in the Maxim Integrated MAX389EPN datasheet.

🖥️

Automated Test Signal Multiplexing

The MAX389EPN+ can route paired analog test channels in automated measurement and instrumentation systems where two 4:1 multiplexer sections are preferable to multiple discrete selectors. The differential configuration supports measurements that benefit from routing a signal and its reference through coordinated paths. Its 3 kOhm on resistance must be included when evaluating test accuracy, while the fault-protection feature should be checked against the voltage and source impedance of the fixture. Use the manufacturer truth table and electrical characteristics to implement control logic correctly.

🔧

Laboratory Instrumentation

The MAX389EPN+ is suitable for laboratory instrumentation built around interchangeable analog front ends. Two 4:1 differential sections allow several conditioned inputs to share a downstream instrument channel, while the 18-pin PDIP format simplifies prototype assembly, socket use, and manual replacement in educational or service-oriented equipment. The 3 kOhm on resistance contributes to signal attenuation and should be compared with the selected amplifier's input impedance. Confirm maximum signal voltage and switching behavior against the Maxim Integrated datasheet before connecting external test leads.

🏭

Process Control Signal Conditioning

The MAX389EPN+ can be used in process-control equipment to select among several differential analog inputs before signal conditioning or controller input stages. Its industrial temperature grade supports industrial environments, and the dual 4:1 topology reduces the number of separate analog switches required when paired signals share common downstream circuitry. Because process signals may contain transients or abnormal voltages, the circuit should include appropriate source protection and use the documented fault-protection ratings. Verify common-mode range and operating limits in the manufacturer datasheet.

📡

Data Acquisition Front Ends

The MAX389EPN+ is useful in data-acquisition front ends requiring analog multiplexing ahead of an amplifier, converter, or sampling system. Its differential 4:1 arrangement can route paired inputs while preserving a consistent signal structure through the board. The 3 kOhm on resistance must be considered together with switch capacitance, source impedance, and acquisition bandwidth, so timing and capacitance values should be obtained from the MAX389EPN datasheet. The 18-pin PDIP footprint is particularly convenient for instrumentation platforms intended for service and prototype use.

🌐

Communication and RF Test Systems

The MAX389EPN+ can serve as a controlled analog routing element in communication and RF test systems when several low- or moderate-level measurement paths must reach shared test circuitry. The differential 4:1 architecture, 3 kOhm on resistance, and fault-protection positioning are useful for controlled routing, although insertion loss and high-frequency behavior remain design constraints. Use the manufacturer's switching-time and capacitance data to establish usable bandwidth. The through-hole PDIP package also makes the device practical in laboratory fixtures and legacy test platforms.

What is the MAX389EPN+ used for?
The MAX389EPN+ is a dual 4:1 differential analog multiplexer used to route analog signals in industrial and instrumentation systems. It contains two switching circuits, each with a 4:1 configuration, and is offered in an 18-pin PDIP package. According to the Maxim Integrated MAX389EPN datasheet, the MAX389 family also provides fault protection, making the device relevant to signal paths where overvoltage or fault-current behavior must be considered during system design.
What is the on-resistance of the MAX389EPN+?
The MAX389EPN+ has an on-resistance of 3 kOhm. This value describes the resistance of a closed analog switch when the selected channel is connected. According to the Maxim Integrated MAX389EPN datasheet and product listings, the device is a dual 4:1 differential multiplexer. Confirm the test conditions and applicable channel configuration in the datasheet when calculating insertion loss, signal attenuation, and maximum source impedance for a specific circuit.
What package does the MAX389EPN+ use?
The MAX389EPN+ uses an 18-pin PDIP package designed for through-hole PCB mounting. The package is rectangular, has 18 terminals, and is not a surface-mount device. This is confirmed by the MAX389EPN datasheet listing and the Maxim Integrated product listing. Because no 18-pin PDIP drawing appears in the package-diagram library, the PCB footprint should be created from the manufacturer pin dimensions rather than inferred from a neighboring DIP package.
Where can I download the MAX389EPN+ datasheet PDF?
The MAX389EPN+ datasheet PDF can be accessed through the Maxim Integrated MAX389EPN datasheet page listed for this product. The document covers the high-voltage, fault-protected analog multiplexer family and provides the authoritative package, pin, electrical, and switching information. Use the MAX389EPN section because the suffix identifies ordering or packaging details while the core MAX389EPN device remains the functional reference for circuit design.
Where can I find the MAX389EPN+ pinout?
The MAX389EPN+ pinout is defined in the manufacturer datasheet under the pin-description and package-drawing sections. The verified part information confirms an 18-terminal PDIP package, but it does not enumerate the individual terminal names. Use the datasheet pin table and package drawing to assign control inputs, channel terminals, enable functions, and ground or supply connections before laying out the board or wiring a replacement assembly.
Is the MAX389EPN+ pin compatible with MAX389CPN+?
The MAX389CPN+ is identified as a PDIP alternative to the MAX389EPN+, with consistent terminals, package, and functional characteristics according to the MAX389EPN versus MAX389CPN+ comparison. It is therefore the supported same-manufacturer drop-in candidate for this page. Final qualification should still compare the manufacturer pin tables, electrical limits, temperature grade, and fault-protection details for the exact ordering suffix.
What can replace the MAX389EPN+?
The MAX389CPN+ is the documented drop-in replacement candidate for the MAX389EPN+ because both are PDIP parts and the comparison identifies consistent terminals, packages, and main functional characteristics. No verified cross-brand replacement with the same package and pin arrangement was identified. Before production substitution, compare absolute maximum ratings, channel configuration, on-resistance, control timing, and operating-temperature limits directly between the two manufacturer datasheets.
Is the MAX389EPN+ suitable for industrial instrumentation?
The MAX389EPN+ is suitable for industrial instrumentation when the circuit stays within the device's specified electrical limits. It has an industrial temperature grade, a differential 4:1 dual-circuit architecture, 3 kOhm on resistance, and fault-protection functionality. The MAX389EPN datasheet should be used to verify signal-voltage limits, switching behavior, control thresholds, and power requirements before selecting it for a particular measurement configuration.
How do I choose between MAX389EPN+ and MAX389CPN+?
Choose the MAX389EPN+ when the design requires the MAX389EPN fault-protected dual 4:1 differential multiplexer specification, and choose the MAX389CPN+ when its documented characteristics satisfy the application while offering a practical package-compatible substitution. Both are identified as PDIP devices with consistent terminals and functional characteristics. Compare their complete datasheet specifications rather than relying only on the shared footprint, because protection, voltage, timing, and grade details determine final suitability.
Where can I buy MAX389EPN+ online?
The MAX389EPN+ can be requested through the Request a Quote form on this page. The form is the appropriate route for checking exact suffix availability, current lead time, minimum order quantity, and delivered pricing without relying on an outdated catalog figure. Include the full MAX389EPN+ ordering code, required quantity, and target delivery location so the request can be matched to the correct 18-pin PDIP device.
What is the price of MAX389EPN+?
Current pricing for the MAX389EPN+ is handled through the Request a Quote form on this page. Submit the required quantity and application details to receive a current quotation for the exact MAX389EPN+ part number and packaging configuration. This approach prevents a stale unit price or a mismatched distributor inventory record from being used for an obsolete or long-tail ordering suffix.
What is the lead time for MAX389EPN+?
The current lead time for MAX389EPN+ is confirmed through the Request a Quote form on this page. Lead time can depend on the exact suffix, factory inventory, quantity, and destination, so a general catalog estimate may not represent a schedulable shipment. Include your required quantity and production schedule when submitting the request, especially if the design must accommodate a long-tail through-hole component.
Is MAX389EPN+ in stock?
Current stock for MAX389EPN+ is checked through the Request a Quote form on this page. The form lets the requester specify the exact quantity and receive an availability response for the MAX389EPN+ ordering code. Because the device uses a legacy 18-pin PDIP format, inventory should be confirmed rather than inferred from general distributor search pages or from the presence of a related ordering suffix.
What are the key specifications of MAX389EPN+ that engineers should know?
The MAX389EPN+ key specifications are a dual-circuit design, 4:1 multiplexing configuration, differential operation, 3 kOhm on resistance, 18-pin PDIP construction, through-hole mounting, and an industrial temperature grade. The MAX389 family documentation also describes fault protection. According to the Maxim Integrated MAX389EPN datasheet, these characteristics position the device for industrial analog routing, with complete voltage, timing, and control details defined in the manufacturer documentation.
Is there a cross-brand equivalent for the MAX389EPN+?
No verified cross-brand equivalent for the MAX389EPN+ was identified with a confirmed 18-pin PDIP footprint, matching pin arrangement, and close electrical characteristics. The documented package-compatible option is the same-manufacturer MAX389CPN+. A cross-brand design should therefore be treated as a new engineering selection rather than an automatic drop-in substitution, requiring full review of pinout, voltage ratings, on-resistance, switching behavior, protection, and temperature grade.

Data referensi kejuruteraan untuk MAX389EPN+ — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose the MAX389EPN+ when the design requires a dual 4:1 differential analog multiplexer in an 18-pin PDIP package, with a confirmed 3 kOhm on resistance, industrial temperature grade, and fault-protected family architecture. Its through-hole construction is particularly useful for laboratory instruments, process-control equipment, test fixtures, and long-life systems intended for easy assembly or replacement. Consider the MAX389CPN+ when the documented PDIP terminal compatibility and consistent functional characteristics match the design, but review its complete electrical ratings, switching data, protection behavior, and temperature grade first. No verified cross-brand drop-in candidate was identified, so a competitor should not be treated as interchangeable without a full pinout, package, voltage, timing, and protection review. For new compact products, evaluate whether a surface-mount multiplexer is more appropriate than retaining the legacy PDIP footprint.

Perbandingan dengan Gantian

Parametr Produk Ini MAX389CPN+
Package 18-pin PDIP PDIP; reported as package and terminal compatible
Brand Analog Devices Analog Devices
Mounting Type Through hole Through hole

Penyeberangsung Jelas

  • Documented dual differential multiplexing architecture (vsMAX389CPN+)
  • Verified on-resistance and industrial grade (vsMAX389CPN+)
  • Supported package-compatible service replacement (vsMAX389CPN+)

Catatan Desain

Create the PCB footprint from the 18-pin PDIP dimensions in the MAX389EPN datasheet rather than adapting a 16-pin or 20-pin DIP footprint. Preserve adequate spacing around the device for through-hole soldering, inspection, and socket use. Route the selected analog paths away from digital control traces and power-switching nodes, and use a ground-reference strategy that minimizes differences between the two differential switching paths.

Include the 3 kOhm on resistance in the input-impedance calculation for every selected channel. The attenuation introduced by the switch is also affected by source impedance, downstream amplifier input impedance, and off-channel behavior. For higher-speed or high-impedance nodes, obtain the manufacturer switching-time and capacitance values before estimating usable bandwidth. Keep sensitive traces short and provide a nearby ground return to reduce coupling into the differential signal path.

Do not treat the fault-protected MAX389 family description as permission to exceed the device's absolute maximum ratings. Confirm the allowable analog signal voltage, supply range, control-input thresholds, and channel state for every operating condition in the manufacturer datasheet. Also verify the truth table before firmware or logic design; incorrect select and enable sequencing can connect unintended sources or place the instrumentation in an invalid state.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

The identified industrial product information does not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. Confirm compliance with the manufacturer product page or declaration for the exact ordering suffix.

Data disahkan pada: 2026-11-14 — data yang disahkan dan disusun semula oleh pasukan kejuruteraan komponen XAIPART

Pencarian Berhubungan

MAX389EPN+ datasheet MAX389EPN+ pinout MAX389EPN+ datasheet pdf MAX389EPN+ specifications MAX389EPN+ 18-pin PDIP MAX389EPN+ 4:1 multiplexer MAX389EPN+ equivalent MAX389EPN+ replacement MAX389EPN+ vs MAX389CPN+ Analog Devices MAX389EPN+ MAX389EPN+ price MAX389EPN+ stock

Komponen dan Tanda berkaitan

Analog Devices Maxim Integrated MAX389EPN+ MAX389EPN MAX389CPN+ MAX389CJN analog multiplexer analog switch differential multiplexer interface IC 4:1 multiplexer dual switch 3 kOhm on resistance fault protection 18-pin PDIP PDIP through-hole mounting industrial temperature grade signal routing data acquisition process control test instrumentation
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ