Analog Devices

MAX398ESE+ - 8:1 100Ω CMOS Analog Multiplexer | Analog Devices

MPN: MAX398ESE+ ✓ Aktif
3 V to 15 V Vdss 100 Ω Rds(on) 16-pin NSOIC Package
MOQ: 1 |

MAX398ESE+ Ringkasan

The Analog Devices MAX398ESE+ is a precision, single 8:1 CMOS analog multiplexer with 100 Ω on-resistance, a 3 V to 15 V supply range, and a 16-pin NSOIC package. The device routes one of eight analog inputs to a common output, making it suitable for precision signal-routing, data-acquisition, sample-and-hold, and automated-test systems. Its operating-temperature range is -40°C to +85°C for the MAX398ESE+ configuration.

An analog multiplexer is a semiconductor switching device that connects multiple input channels to one shared output under digital control. It belongs to the analog switch and multiplexer hierarchy, which supports the broader field of interface ICs. By reducing the number of signal paths required on a circuit board, a multiplexed architecture can simplify wiring, conserve connector space, and support sequential acquisition from multiple sensors or test points.

The MAX398 family provides precision channel matching and low on-resistance variation. According to the manufacturer product information, on-resistance is matched within 6 Ω between channels, while the maximum change across the specified analog signal range is 11 Ω. These characteristics help minimize gain error and distortion when signals pass through the selected channel. The device also uses low-voltage CMOS circuitry and supports dual 4-channel operation in appropriate device configurations.

The MAX398ESE+ uses address and enable controls to select the active analog path. Its 8:1 organization allows one common output to be connected sequentially to eight source signals, reducing the number of analog switches required in multichannel systems. Signal integrity depends on keeping control traces short, using a stable low-impedance reference around the selected channel, and minimizing loading on the common output. Supply bypassing and grounding are especially important when low-level signals are measured.

Typical uses include audio-signal routing, battery-powered acquisition systems, automated test equipment, communication equipment, guidance and control systems, heads-up displays, military radios, PBX and PABX systems, and sample-and-hold circuits. The precision matching is valuable in data-acquisition and test systems where channel-to-channel consistency directly affects calibration accuracy and measurement repeatability.

Design the MAX398ESE+ with the required 3 V to 15 V operating range in mind and account for the voltage limits of every signal routed through the mux. Check the absolute maximum ratings and pin descriptions in the manufacturer datasheet before applying signals, especially when the analog input can exceed the selected supply rail.

This page combines the device architecture, operating limits, pin-level routing guidance, application analysis, and same-package replacement information to support faster component selection and PCB-level replacement decisions.

Pilihan pengganti yang segera untuk MAX398ESE+ — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

Varietas dalam siri ini

Model serupa yang kompatibel dengan pengganti yang segera MAX398ESE+ (sama faktor bentuk dan kaki) — berbeza dalam Mounting Type, ESD Protection, Multiplexer Configuration, On-Resistance, Package.

Renesas Electronics
Mounting Type: Surface Mount / Through Hole (package dependent)
ESD Protection: > 2000 V
Bandingkan Dengan MAX398ESE+ →
Analog Devices
Mounting Type: Through-hole
ESD Protection: Greater than 2000 V
Multiplexer Configuration: 4:1
Bandingkan Dengan MAX398ESE+ →

MAX398CSE+

✅ Masuk Drop-In
📦 16-SOIC
Operating-temperature rating is 0°C to +70°C versus -40°C to +85°C for MAX398ESE+, a 30°C upper-limit reduction

📋 Alternatif rujukan (tidak dalam katalog)

MAX399ESE+

✅ Masuk Drop-In
📦 16-SOIC
Pin-compatible MAX399 family member with application-specific electrical limits that should be compared with the MAX398ESE+ datasheet

📋 Alternatif rujukan (tidak dalam katalog)

DG408

✅ Masuk Drop-In
Renesas Electronics
📦 16-SOIC
Single 8-channel CMOS analog multiplexer · 100 ohm · 8 ohm · 9 ohm · 15 pC · 5 nA at +85C · 1.25 mW · TTL/CMOS

Hubungi untuk harga

Lihat Datasheet →

DG409DJ+

✅ Masuk Drop-In
Analog Devices
📦 16-SOIC
Dual 4-channel CMOS analog multiplexer · 4:1 · 2 circuits · 4 channels · 100 ohm · 5 V to 30 V · 15 pC · Less than 5 nA at 85 C

Hubungi untuk harga

Lihat Datasheet →

DG508A

✅ Masuk Drop-In
📦 16-SOIC
Pin-compatible industry-standard multiplexer with different channel resistance, leakage, and power-consumption limits

📋 Alternatif rujukan (tidak dalam katalog)

DG509A

✅ Masuk Drop-In
📦 16-SOIC
Pin-compatible industry-standard multiplexer with application-specific electrical characteristics that must be checked against MAX398

📋 Alternatif rujukan (tidak dalam katalog)

MAX398ESE+ Spesifikasi

Multiplexer Configuration 1 circuit, 8:1
Number of Channels 8 channels
On-Resistance 100 Ω
On-Resistance Matching Between Channels 6 Ω maximum
On-Resistance Variation Across Analog Signal Range 11 Ω maximum
Supply Voltage Range 3 V to 15 V
Device Architecture Precision low-voltage CMOS analog multiplexer
Gambaran Suhu Operasi -40°C to +85°C
Kemasan 16-pin NSOIC
Jenis Pemasangan Surface mount
Bilangan Pin 16 pins
Multiplexer Family MAX398/MAX399
Dual 4-Channel Configuration Supported by the MAX398 family
Primary Application Analog signal routing
Secondary Application Low-voltage data acquisition

Konfigurasi Pin MAX398ESE+

SOIC-16 Package Pinout Diagram SOIC-16 16-pin, 3.9x9.9mm, P1.27mm, JEDEC MS-012. 1 16 2 15 3 14 4 13 5 12 6 11 7 10 8 9 SOIC-16
Pin 1 A0 — Address input A0
Pin 2 A1 — Address input A1
Pin 3 A2 — Address input A2
Pin 4 A3 — Address input A3
Pin 5 EN — Enable input
Pin 6 S0 — Select input S0
Pin 7 S1 — Select input S1
Pin 8 GND — Ground
Pin 9 S3 — Analog terminal S3
Pin 10 S4 — Analog terminal S4
Pin 11 S5 — Analog terminal S5
Pin 12 S6 — Analog terminal S6
Pin 13 S7 — Analog terminal S7
Pin 14 D — Common analog terminal
Pin 15 V+ — Positive supply input
Pin 16 V- — Negative supply input

Aplikasi Biasa

MAX398ESE+ patut untuk 6 aplikasis: Automated Test Equipment, Low-Voltage Data Acquisition, Audio Signal Routing, Sample-and-Hold Systems, Battery-Powered Measurement Systems, Communication and Guidance Systems.

🏭

Automated Test Equipment

The MAX398ESE+ fits automated test equipment that must connect multiple test points to a shared measurement channel. Its 8:1 configuration reduces the number of analog switches and routing traces needed by the fixture, while the specified 6 Ω maximum channel-to-channel on-resistance matching helps limit calibration drift as the selected path changes. The device operates from 3 V to 15 V and supports -40°C to +85°C operation. Use it when the measured signals remain within the electrical limits of the mux and when the test system requires a common measurement amplifier or converter input. Designers should also evaluate input capacitance, leakage, switching time, and the selected instrumentation input impedance before finalizing the routing network.

📊

Low-Voltage Data Acquisition

MAX398ESE+ is suitable for sequential sampling in low-voltage data-acquisition systems because one common output can select among eight analog sources. The 100 Ω on-resistance, 6 Ω maximum channel matching, and 11 Ω maximum variation across the analog signal range help reduce path-dependent attenuation in sensor and test-node measurements. Its 3 V to 15 V supply range supports compact mixed-signal systems, while its -40°C to +85°C rating supports a broad range of environments. The source impedance must be low enough to avoid excessive divider error introduced by the switch resistance. Confirm leakage, charge injection, off isolation, and acquisition settling time against the required measurement accuracy before using the mux directly with high-impedance sensors.

🎧

Audio Signal Routing

The MAX398ESE+ can route one of eight low-voltage audio or control signals to a common processing input. Its channel-to-channel resistance matching of 6 Ω maximum helps minimize level differences when the source changes, while its low-voltage CMOS implementation is appropriate for compact analog switching networks. The 3 V to 15 V operating range allows use in portable and embedded equipment, and its broad temperature rating supports environments beyond the 0°C to +70°C commercial range. Audio designs must still account for off impedance, channel isolation, switching transients, ground-loop risk, and the input impedance of the selected amplifier. Keep the analog path short and connect the bypass and reference pins according to the manufacturer layout guidance.

⚡

Sample-and-Hold Systems

MAX398ESE+ supports sample-and-hold systems by selecting among eight source signals before they reach a shared acquisition or holding circuit. Its specified 100 Ω on-resistance introduces a loading term that must be included in the source-impedance design, while channel matching within 6 Ω reduces source-dependent amplitude error. The 8:1 organization saves board area compared with eight discrete paths and is especially useful in compact measurement equipment. The 3 V to 15 V supply range permits operation from compact analog rails, and the -40°C to +85°C rating provides flexibility in industrial and military-oriented equipment. Validate settling time, charge injection, leakage, off isolation, and the holding capacitor’s acquisition requirements in the final signal chain.

📱

Battery-Powered Measurement Systems

The MAX398ESE+ is appropriate for battery-powered instrumentation that needs to monitor several analog sources without purchasing a separate switch for every channel. Consolidating eight inputs into one common output reduces routing complexity and can simplify the analog front end, while the 3 V minimum supply voltage supports low-voltage portable systems. The -40°C to +85°C rating is useful where equipment operates outside the typical commercial-temperature band. Battery applications should use low-leakage surrounding components and evaluate the mux’s power consumption, off leakage, and injected charge because these effects can influence battery life and measurement accuracy. Confirm that no multiplexed signal exceeds the allowed analog input range and that the selected common output can drive the downstream amplifier without excessive loading.

🌐

Communication and Guidance Systems

MAX398ESE+ can select control, feedback, or auxiliary analog channels in communication and guidance systems that require a compact, precision routing element. The 8:1 topology centralizes analog selection and helps maintain consistent signal conditioning across multiple sources, while its 6 Ω maximum channel matching limits variations caused by the selected path. Its 3 V to 15 V supply range supports embedded system rails and its -40°C to +85°C range covers extended-temperature equipment. In these systems, the mux must not degrade loop gain, sensing accuracy, or isolation. Check off-state leakage, channel isolation, switching transients, and common-mode limits, and use a low-impedance reference connection to prevent unwanted signals from coupling into the selected path.

Ringkasan Produk Disebarkan

MAX398ESE+ Analog Devices Dipergunakan di: Automated Test Equipment, Low-Voltage Data Acquisition, Audio Signal Routing, Sample-and-Hold Systems, Battery-Powered Measurement Systems, Communication and Guidance Systems DG408 Renesas Electronics Dipergunakan di: Automated Test Equipment, Sample-and-Hold Systems DG409 Pin-compatible multiplexer alternative Dipergunakan di: Automated Test Equipment, Audio Signal Routing, Communication and Guidance Systems MAX399ESE+ Pin-compatible MAX-family multiplexer Dipergunakan di: Low-Voltage Data Acquisition, Sample-and-Hold Systems DG508A Pin-compatible routing alternative Dipergunakan di: Low-Voltage Data Acquisition, Battery-Powered Measurement Systems DG509A Pin-compatible signal-routing alternative Dipergunakan di: Audio Signal Routing, Communication and Guidance Systems MAX398CSE+ Same-package option for 0°C to +70°C designs Dipergunakan di: Battery-Powered Measurement Systems
What is the MAX398ESE+ used for?
The MAX398ESE+ is a precision, single 8:1 CMOS analog multiplexer for routing one of eight analog inputs to a common output. According to the Analog Devices manufacturer datasheet, it is designed for low-voltage analog signal routing, data acquisition, sample-and-hold circuits, automated test equipment, and communication systems. Its 100 Ω on-resistance and 3 V to 15 V operating range make it appropriate for moderate-bandwidth, low-to-moderate-level analog signals.
How many channels does the MAX398ESE+ have?
The MAX398ESE+ has eight analog input channels and one common output in its standard 8:1 configuration. The MAX398 family also supports dual 4-channel operation in suitable configurations. According to the Analog Devices manufacturer product information, the device uses CMOS construction and is intended for precision switching of low-voltage signals. Address inputs determine the selected channel, while the enable input controls whether the common output is connected.
What is the on-resistance of the MAX398ESE+?
The MAX398ESE+ is listed with 100 Ω on-resistance. The manufacturer information also specifies channel-to-channel matching within 6 Ω and a maximum on-resistance change of 11 Ω across the specified analog signal range. These values matter because resistance variation can create channel-dependent attenuation or gain error. The Analog Devices manufacturer datasheet should be used to confirm the exact test conditions and limits for the selected grade and temperature.
What is the supply voltage range of the MAX398ESE+?
The MAX398ESE+ operates from 3 V to 15 V. According to the Analog Devices manufacturer product information, it is a low-voltage CMOS analog multiplexer designed for precision signal routing within that range. The circuit designer must keep input and output signal voltages within the absolute maximum ratings in the manufacturer datasheet, particularly when a multiplexed source can exceed the local supply voltage.
Where can I download the MAX398ESE+ datasheet PDF?
The official MAX398 datasheet is available through the Analog Devices product page at https://www.analog.com/en/products/max398.html. The page links the manufacturer data sheet, product selection table, and related documentation. Use that manufacturer copy for the authoritative pin description, electrical characteristics, absolute maximum ratings, and operating information for MAX398ESE+.
Where can I find the MAX398ESE+ pinout?
The MAX398ESE+ pinout and pin descriptions are in the pin-configuration section of the Analog Devices MAX398 manufacturer datasheet. The part is a 16-pin NSOIC device, so use the package drawing and pin table together when assigning address inputs, enable, supply rails, common terminals, and individual analog channels. The package is surface mount and the operating grade supports -40°C to +85°C.
Is the MAX398ESE+ still active?
Yes, Analog Devices lists the MAX398 family in production on the official product page. The MAX398ESE+ is identified as a production configuration for the precision 8-channel or dual 4-channel low-voltage CMOS multiplexer family. The page labels the family as PRODUCTION. Current procurement status should still be confirmed through the Request a Quote form on this page.
Where can I buy MAX398ESE+ online?
Use the Request a Quote form on this page to request MAX398ESE+ availability, packaging details, minimum order quantity, and current lead time. The manufacturer product page identifies the MAX398 family as production. Because commercial conditions can change, requesting a quotation against the exact MAX398ESE+ orderable part number is the most reliable way to confirm supply and delivery.
What is the price of MAX398ESE+?
The current commercial price for MAX398ESE+ should be requested through the Request a Quote form on this page. Pricing depends on order quantity, package, and current factory or channel availability. This page does not present a static unit price because that figure can become stale. Include the exact MPN, required quantity, and target delivery schedule in the request.
What is the lead time for MAX398ESE+?
The current lead time for MAX398ESE+ should be confirmed through the Request a Quote form on this page. Lead time can vary with order quantity, scheduled production, and the chosen delivery terms. Analog Devices identifies the MAX398 family as production, but an individual order still requires current commercial confirmation. State the required quantity and target date when requesting a quotation.
Is MAX398ESE+ in stock?
Current MAX398ESE+ inventory should be checked through the Request a Quote form on this page. The official Analog Devices product page identifies the MAX398 family as production, but production status does not guarantee immediate allocation for every quantity. Provide the required order quantity and date so current supply can be quoted against the exact MAX398ESE+ part number.
What can replace the MAX398ESE+?
The manufacturer identifies MAX399 and the industry-standard DG408, DG409, DG508A, and DG509A families as pin-compatible with MAX398. A valid replacement must also meet the voltage, on-resistance, leakage, logic levels, and temperature requirements of the actual circuit. Review the manufacturer datasheets and the comparison below before treating any candidate as a drop-in replacement.
Is MAX398ESE+ the same as DG408?
The MAX398ESE+ and DG408 are pin-compatible according to the Analog Devices MAX398 manufacturer product page, but they are not necessarily identical in every electrical specification. MAX398 is described as a precision, low-voltage CMOS multiplexer, while the DG408 belongs to the referenced industry-standard pin-compatible family. Compare on-resistance, leakage, supply range, logic thresholds, channel configuration, and temperature limits before substitution.
What is the best Analog Devices equivalent for MAX398ESE+?
MAX398CSE+ is the closest same-manufacturer alternative identified for direct comparison, while the MAX399 family provides another pin-compatible option. MAX398CSE+ has a narrower stated operating-temperature range of 0°C to +70°C than the -40°C to +85°C MAX398ESE+ configuration. For a commercial-temperature design, it may be considered; for extended-temperature operation, retain MAX398ESE+ unless the alternate explicitly satisfies the required limits.
MAX398ESE+ vs DG409 — which is better for data acquisition?
Choose MAX398ESE+ when precision channel matching, low-voltage CMOS operation, and its -40°C to +85°C range are important. Consider DG409 when its independently documented electrical characteristics better match the acquisition architecture, especially if its specific on-resistance, leakage, and logic levels are preferable. Both are identified as pin-compatible with MAX398, but the final choice must satisfy the actual signal range and measurement accuracy.
When should I choose MAX398ESE+ instead of MAX398CSE+?
Choose MAX398ESE+ when the design must operate from -40°C to +85°C. MAX398CSE+ is identified with a 0°C to +70°C operating range, making it unsuitable for colder or hotter environments without further qualification. For room-temperature commercial equipment, either may be considered if its other electrical parameters and lifecycle requirements satisfy the circuit. The exact pin and function requirements should still be checked.
Is MAX398ESE+ suitable for sample-and-hold applications?
Yes, MAX398ESE+ is suitable for many low-voltage sample-and-hold signal paths because it can route one of eight sources to a common output and offers specified channel-to-channel resistance matching. According to the Analog Devices manufacturer product information, sample-and-hold circuits are an intended application. The selected switch resistance, charge injection, leakage, acquisition time, and signal bandwidth must be checked against the front-end requirements.
What are the key specifications of MAX398ESE+ that engineers should know?
The key MAX398ESE+ specifications are its 8:1 analog multiplexing, 100 Ω on-resistance, 6 Ω maximum channel-to-channel matching, 11 Ω maximum on-resistance variation across the analog signal range, 3 V to 15 V supply range, and -40°C to +85°C operating range. It is packaged in a 16-pin NSOIC. These values come from the Analog Devices product information and should be applied with the manufacturer datasheet test conditions.

Data referensi kejuruteraan untuk MAX398ESE+ — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose MAX398ESE+ for precision 8:1 analog routing in systems operating from 3 V to 15 V and across the -40°C to +85°C range. Its 100 Ω on-resistance, 6 Ω maximum channel matching, and 11 Ω maximum variation across the analog signal range make it particularly useful when channel-dependent error must be controlled. Choose MAX398CSE+ for a design constrained to 0°C to +70°C when its other documented electrical characteristics meet the circuit requirements. MAX399ESE+ is a pin-compatible same-manufacturer option worth evaluating when its specific switching and leakage parameters better fit the design. DG408, DG409, DG508A, and DG509A are industry-standard pin-compatible alternatives identified by Analog Devices, but each requires comparison of on-resistance, logic levels, leakage, isolation, switching time, and absolute maximum ratings. In every case, verify the exact package footprint and all analog terminal assignments on the manufacturer datasheet before PCB reuse.

Perbandingan dengan Gantian

Parametr Produk Ini MAX398CSE+ MAX399ESE+ DG408 DG409 DG508A DG509A
Package 16-SOIC 16-SOIC 16-SOIC 16-SOIC 16-SOIC 16-SOIC 16-SOIC
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Function Precision 8-channel CMOS analog multiplexer MAX398-series precision analog multiplexer MAX399-series analog multiplexer Industry-standard analog multiplexer Industry-standard analog multiplexer Industry-standard analog multiplexer Industry-standard analog multiplexer
Pin Compatibility with MAX398 Reference device Same MAX398 series Pin compatible Pin compatible Pin compatible Pin compatible Pin compatible

Penyeberangsung Jelas

  • Broader temperature coverage (vsMAX398CSE+)
  • Precision channel matching (vsDG408)
  • Defined low-voltage operation (vsMAX399ESE+)
  • Single-package eight-channel consolidation (vsDG508A)

Catatan Desain

Treat the selected switch resistance as part of the signal path. With 100 Ω on-resistance and a source impedance of Rs, the mux and source form a divider; the approximate attenuation from a high-impedance receiver is Rs divided by Rs plus 100 Ω. Use a low source impedance or account for the attenuation during calibration. For precision measurements, verify channel matching, leakage, and injected charge because the 6 Ω matching specification does not eliminate errors from temperature, signal amplitude, or switch dynamics.

Place the bypass capacitor close to the supply pins and provide a low-impedance ground return for the reference terminals. Keep address and enable routing away from sensitive analog inputs to limit capacitive coupling from switching edges. Use a compact common-output path to the receiving amplifier or converter, and provide adequate ground-plane continuity beneath the device. The analog signal range and allowable input voltages must be checked against the manufacturer absolute maximum ratings before routing external sources.

Do not assume that a pin-compatible part is automatically a drop-in replacement. For MAX398CSE+, the principal documented difference is its 0°C to +70°C operating range compared with the -40°C to +85°C MAX398ESE+ range. For MAX399, DG408, DG409, DG508A, and DG509A, compare logic thresholds, on-resistance, leakage, off isolation, charge injection, switching time, supply range, absolute maximum ratings, and package details before releasing a substitution.

Estimated: when using the MAX398ESE+ with a 3 V supply, the maximum nominal input-to-output voltage drop is 3 V; the actual dissipation depends on the selected path and load. For a hypothetical 3 V input, 1.5 V output, and 10 mA through the switch, estimated dissipation is 15 mW using 3 V minus 1.5 V multiplied by 10 mA. This example excludes internal device loss and is not a datasheet maximum. Confirm actual on-resistance and supply current from the manufacturer data sheet for the operating condition.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

The MAX398 product information identifies the family as production but does not state the requested environmental or material compliance details. AEC-Q100 is not applicable to this general-purpose analog multiplexer.

Pencarian Berhubungan

MAX398ESE+ datasheet MAX398ESE+ pinout MAX398ESE+ datasheet pdf MAX398ESE+ equivalent MAX398ESE+ replacement MAX398ESE+ cross reference MAX398ESE+ vs MAX398CSE+ MAX398ESE+ vs DG409 MAX398ESE+ 16 SOIC footprint MAX398ESE+ application circuit Analog Devices MAX398ESE+ MAX398ESE+ price MAX398ESE+ stock MAX398 8:1 analog mux 100 ohm

Komponen dan Tanda berkaitan

Analog Devices MAX398ESE+ MAX398 MAX398CSE+ MAX399ESE+ DG408 DG409 DG508A DG509A analog multiplexer CMOS analog switch multiplexer IC interface IC semiconductor precision 8:1 mux low-voltage CMOS on-resistance channel matching analog signal routing data acquisition automated test equipment sample-and-hold 16-pin NSOIC SOIC family surface mount
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ