onsemi

MC14022BD - 4-Stage Octal Counter, 16-SOIC | onsemi

MPN: MC14022BD ✓ Aktif
3 V to 18 V Vdss 16-SOIC, 0.154 in (3.90 mm) width Package Positive edge Speed
MOQ: 1 |

MC14022BD Ringkasan

The onsemi MC14022BD is a four-stage Johnson octal counter with a built-in code converter, packaged in a 16-SOIC. It accepts a positive-going clock edge, operates from a 3 V to 18 V supply, and provides eight decoded outputs whose transitions occur on the rising clock edge. The Johnson-counter architecture is intended to produce spike-free outputs while supporting high-speed operation. MC14022BD is suited to frequency division, sequencing, timing, and digital state-generation circuits where one low-frequency clock must be translated into eight ordered output intervals.

An octal counter is a sequential digital-logic component that advances through a fixed sequence of states when driven by clock transitions. The MC14022B family uses a four-stage Johnson counter followed by an integrated decoder. A Johnson counter circulates a defined pattern through four internal stages, while the decoder converts that pattern into eight mutually timed output signals. Within the broader semiconductor hierarchy, the device belongs to the counters and dividers category of CMOS logic ICs.

The primary features of the MC14022BD include eight decoded outputs, positive-edge triggering, and spike-free output behavior. Its 3 V to 18 V operating range allows use in both lower-voltage 5 V systems and conventional 15 V industrial logic environments. The four-stage counter provides the basis for dividing an input frequency into eight output periods, while the built-in code converter simplifies implementation compared with a separate binary counter and decoder arrangement.

Internally, the part combines four Johnson-counter stages with decoding logic. Each decoded output is normally low and becomes high only during its assigned octal time period. The outputs change on the positive-going edge of the clock pulse, making edge polarity an essential consideration when cascading multiple counters or synchronizing the circuit with other positive-edge-triggered logic. The design supports cascaded frequency division and ordered pulse generation without requiring an external binary-to-octal decoder.

Typical applications include divide-by-eight clock generation, programmable timing sequences, industrial control sequencing, digital waveform generation, and phase-distribution circuits. The device can also serve as a compact state decoder when a system requires eight outputs corresponding to successive input-clock intervals. In cascaded arrangements, multiple MC14022BD devices can create longer timing sequences or additional frequency divisions while retaining a consistent positive-edge operating model.

Designers should account for output rise and fall times, supply decoupling, and clock-signal integrity when operating near the upper frequency capability of the device. Place the decoupling capacitor close to the supply pins and route the clock away from output lines to avoid unintended coupling. Because the outputs change on the positive-going clock edge, downstream circuitry should use compatible triggering conventions or deliberate inversion where required.

This page combines the MC14022BD device description with practical design guidance, verified source links, application-focused engineering context, and a structured comparison of compatible family members. It also organizes sourcing information, compliance fields, package details, and technical search terms to help engineers evaluate the MC14022BD for counter, divider, timing, and sequencing designs.

Pilihan pengganti yang segera untuk MC14022BD — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

MC14022BDG

✅ Masuk Drop-In
📦 16-SOIC
Same 4-bit positive-edge Johnson counter function; shipment-format suffix differs, while the 16-SOIC footprint remains the same

📋 Alternatif rujukan (tidak dalam katalog)

MC14022BDR2

✅ Masuk Drop-In
📦 16-SOIC
Same MC14022B four-stage Johnson octal-counter family and 16-SOIC package; ordering suffix differs by 0% on the identified core function

📋 Alternatif rujukan (tidak dalam katalog)

MC14022BDEBS

✅ Masuk Drop-In
📦 16-SOIC
Same MC14022B counter family and 16-SOIC footprint; environmental-ordering suffix differs while the positive-edge 4-bit counter function remains unchanged

📋 Alternatif rujukan (tidak dalam katalog)

MC14022BD Penilaian maksimum & Ciri-ciri Elektrik

Counter Type 4-stage Johnson octal counter with built-in code converter
Number of Output States 8 states
Counter Elements 1 element
Counter Width 4 bit
Clock Edge Positive edge
Supply Voltage Range 3 V to 18 V
Konfigurasi Output 8 decoded outputs
Output Transition Edge Positive-going clock edge
Output Behavior Spike-free decoded outputs
Initial Output State Normally low
Kemasan 16-SOIC, 0.154 in (3.90 mm) width
Jenis Pemasangan Surface mount
Logic Family CMOS counter

Panduan Konfigurasi Pin MC14022BD 16-soic, 0.154 in (3.90 mm) width

Konfigurasi pin untuk MC14022BD (16-soic, 0.154 in (3.90 mm) width pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.

Garis bentuk pengecah pakai 16-soic, 0.154 in (3.90 mm) width untuk MC14022BD

Tiada data garisan pin yang diperoleh untuk MC14022BD.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

MC14022BD patut untuk 6 aplikasis: Divide-by-Eight Clock Generation, Digital Timing Sequence Control, Industrial Step Sequencing, Waveform and Pulse Pattern Generation, Frequency Division and Cascaded Counters, Instrumentation and Measurement Control.

⚡

Divide-by-Eight Clock Generation

The MC14022BD is well suited to divide-by-eight clock generation because its four-stage Johnson counter and built-in decoder produce eight ordered output periods from one positive-edge clock. According to the manufacturer datasheet, the decoded outputs change on the rising clock edge and are designed to avoid output spikes. This makes the 16-SOIC device useful when a downstream circuit requires several phase-related timing signals rather than only a single divided square wave. Designers should confirm the required operating frequency, output drive, and cascade timing against the electrical characteristics before fixing the clock rate.

🏭

Digital Timing Sequence Control

The eight decoded outputs of the MC14022BD can represent successive portions of a clock cycle, making the device useful for deterministic timing-sequence control. Each output is normally low and asserts only during its designated octal interval, while transitions occur on the positive-going clock edge. Compared with a binary counter followed by a separate decoder, the integrated 16-SOIC implementation reduces package count and simplifies board routing. Logic should be designed around the specified edge polarity so that connected state machines do not interpret the decoded sequence differently.

⚙️

Industrial Step Sequencing

In industrial equipment, the MC14022BD can turn a system clock into eight ordered output intervals for step sequencing, actuator timing, or repeatable control phases. Its 3 V to 18 V operating range supports common logic supply levels, and the built-in Johnson-to-octal decoding avoids the component count of a separate counter and decoder. The normally-low output convention provides a defined inactive state between asserted intervals. For machinery applications, add galvanic isolation, drive circuitry, and safety controls as required; the counter is a timing element rather than a power driver.

🖥️

Waveform and Pulse Pattern Generation

The MC14022BD can generate an ordered sequence of decoded pulses because each of its eight outputs corresponds to a defined octal time period. This arrangement is useful in test equipment, signal-generation modules, and periodic control systems that require more than one phase from a compact counter. The manufacturer describes the Johnson design as providing high-speed operation and spike-free outputs, reducing unwanted transients in the decoded pattern. Confirm output rise and fall times in the datasheet and preserve adequate clock and supply routing to maintain deterministic behavior.

🌐

Frequency Division and Cascaded Counters

The MC14022BD can divide a periodic input into eight decoded intervals and can participate in cascaded timing chains that require longer cycles or additional outputs. Positive-edge operation provides a consistent clocking model when multiple counters are interconnected, provided propagation delays and clock-edge compatibility are checked. The 3 V to 18 V range allows common industrial logic rails, while the 16-SOIC package limits board area compared with multiple discrete decoding stages. Cascaded designs should include a defined reset sequence and verify worst-case timing across all counter and feedback paths.

🔧

Instrumentation and Measurement Control

The MC14022BD can establish repeatable acquisition, measurement, or calibration intervals by supplying eight ordered timing windows from a master clock. Its decoded outputs are normally low and assert one at a time according to the octal sequence, simplifying multiplexer drive or timing-enable generation. The integrated counter and code converter also reduce the number of external logic packages in compact instrumentation. Designers should synchronize control signals to the rising clock edge and evaluate ground bounce, clock routing, and supply decoupling for high fan-out loads.

Ringkasan Produk Disebarkan

MC14022BDG Package-compatible MC14022B family member Dipergunakan di: Divide-by-Eight Clock Generation, Digital Timing Sequence Control, Industrial Step Sequencing, Waveform and Pulse Pattern Generation, Frequency Division and Cascaded Counters, Instrumentation and Measurement Control MC14022BDR2 Same-family counter for supply planning Dipergunakan di: Divide-by-Eight Clock Generation, Industrial Step Sequencing, Frequency Division and Cascaded Counters MC14022BDEBS Same-family alternative for source planning Dipergunakan di: Digital Timing Sequence Control, Waveform and Pulse Pattern Generation, Instrumentation and Measurement Control
What is the onsemi MC14022BD?
The onsemi MC14022BD is a four-stage Johnson octal counter with an integrated code converter and eight decoded outputs. According to the MC14022B manufacturer datasheet, it operates from 3 V to 18 V, changes its outputs on the positive-going edge of the clock, and is offered in a 16-SOIC package. It is appropriate for frequency division, timing sequences, and ordered digital output generation.
What is the operating voltage of MC14022BD?
The MC14022BD operates from 3 V to 18 V. The manufacturer datasheet identifies the device as a CMOS octal counter suitable for standard logic supply environments, including 5 V and 15 V systems. Designers should maintain the specified supply range during both static operation and clock transitions, and should use local supply decoupling to reduce supply disturbance on output-changing edges.
How does the MC14022BD Johnson counter work?
The MC14022BD uses four Johnson-counter stages and an internal decoder to generate eight decoded outputs. The Johnson design provides high-speed operation and spike-free outputs according to the MC14022B datasheet. Every decoded output is normally low and goes high only during its assigned octal interval, making the device useful for divide-by-eight timing and sequential pulse generation.
What clock edge triggers MC14022BD outputs?
The MC14022BD changes its decoded outputs on the positive-going edge of the clock pulse. This is stated in the MC14022B manufacturer datasheet and is an important interface detail when the counter drives other positive-edge-triggered logic. Cascaded counters should therefore share compatible clock conventions or include an intentional inversion stage where required.
Where can I download the MC14022BD datasheet PDF?
The MC14022BD manufacturer datasheet is available from the official onsemi document at https://www.onsemi.com/pdf/datasheet/mc14022b-d.pdf. It contains the device description, operating characteristics, logic details, and connection information for the MC14022B family. Use the package and pin-description sections when assigning PCB nets and checking the 16-SOIC footprint.
Where is the MC14022BD pinout located?
The MC14022BD pinout is located in the connection or pin-description section of the official MC14022B datasheet at https://www.onsemi.com/pdf/datasheet/mc14022b-d.pdf. The component is a 16-SOIC device, so its footprint contains 16 pins. Use the numbered package drawing and pin table together to avoid confusing clock, reset, and decoded-output connections.
Where can I buy MC14022BD and check its current availability?
Use the Request a Quote form on this page to ask for MC14022BD pricing, stock, minimum order quantity, and current lead time. The form connects your request with XAIPART procurement without requiring a static price or availability claim that could become outdated. Include the required package, quantity, and target delivery location in the request.
What is the price of MC14022BD?
The current MC14022BD price depends on order quantity, package configuration, sourcing availability, and delivery requirements. Submit a Request a Quote request on this page for a current quotation and stock confirmation. Providing the required quantity and destination allows procurement to return the most relevant commercial terms without embedding a potentially stale price in the technical description.
What is the lead time for MC14022BD?
The current MC14022BD lead time depends on supplier inventory, order quantity, and the requested shipping destination. Use the Request a Quote form on this page to request current lead time and available delivery options. For production planning, include the required delivery date and annual usage so procurement can assess suitable supply arrangements.
Is MC14022BD in stock?
MC14022BD availability can change with order size and supply conditions. Request a current stock confirmation through the Request a Quote form on this page, and state the quantity, packaging preference, and destination. The manufacturer family and distributor records indicate catalog availability, but a quotation request provides the most reliable answer for a specific purchasing requirement.
What is the best drop-in replacement for MC14022BD?
MC14022BDG is the closest listed package-compatible replacement because it is identified as a 16-SOIC MC14022B-family counter, but it should not be substituted without reviewing suffix-specific ordering and electrical details. The available cross-reference records do not establish five independently qualified drop-in parts. Confirm the manufacturer pin description, supply range, clock behavior, and lifecycle status before approving any replacement.
Can MC14022BDG replace MC14022BD on the same PCB?
MC14022BDG can be considered for a PCB designed around the 16-SOIC MC14022BD footprint because the component listing identifies the same 16-SOIC package and counter configuration. Before substitution, verify the complete pin list, clock-edge convention, supply limits, and suffix-specific qualification in the manufacturer documentation. Order quantity and shipment format may also differ between the two orderable variants.
When should I choose MC14022BD over a discrete counter and decoder?
Choose MC14022BD when the design needs eight decoded, ordered outputs from one positive-edge clock and values the integration of the Johnson counter and code converter. A discrete counter-plus-decoder implementation requires additional packages, interconnects, and timing analysis. The integrated 16-SOIC device is preferable when compactness, standardized decoding, and straightforward frequency division are more important than configurable counter logic.
Is MC14022BD suitable for industrial timing and sequencing?
The MC14022BD fits industrial timing and sequencing tasks that require a 3 V to 18 V CMOS counter, positive-edge clocking, and eight decoded outputs. Its four-stage Johnson architecture produces spike-free outputs according to the MC14022B datasheet. Confirm environmental ratings and automotive qualification separately before using it in safety-critical or vehicle-grade systems.
What are the key specifications of MC14022BD that engineers should know?
The key MC14022BD specifications are a 3 V to 18 V supply range, four-stage Johnson counter architecture, eight decoded outputs, positive-edge clock triggering, spike-free operation, and a 16-SOIC package. The manufacturer datasheet also identifies the outputs as normally low, becoming high only during their appropriate octal intervals. These characteristics define its use in divide-by-eight, timing, and sequencing designs.
What is the difference between MC14022BD and MC14022BDR2?
The available comparison records identify both MC14022BD and MC14022BDR2 as members of the MC14022B four-stage Johnson octal-counter family, but they do not provide a complete suffix-by-suffix comparison. Before treating one as interchangeable with the other, verify package dimensions, pinout, operating limits, and ordering format in the manufacturer documentation. The shared counter architecture alone is not sufficient proof of drop-in interchangeability.

Data referensi kejuruteraan untuk MC14022BD — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose MC14022BD when a design needs eight decoded, positive-edge-triggered timing outputs from a compact 16-SOIC counter and operates from 3 V to 18 V. Its integrated Johnson counter and code converter are especially useful for divide-by-eight clocking, phase distribution, sequencing, and waveform generation. MC14022BDG, MC14022BDR2, and MC14022BDEBS belong to the same MC14022B family and can support supply planning, but suffix-specific ordering, qualification, and environmental details should be checked before substitution. A discrete binary counter and decoder should be selected instead when programmable count values, arbitrary binary decoding, or non-octal output patterns are required. For any MC14022B choice, verify the complete pinout, reset behavior, maximum clock rate, output timing, and temperature grade in the manufacturer documentation before releasing the PCB design.

Perbandingan dengan Gantian

Parametr Produk Ini MC14022BDG MC14022BDR2 MC14022BDEBS
Package 16-SOIC 16-SOIC 16-SOIC 16-SOIC
Brand onsemi onsemi onsemi onsemi
Counter Architecture 4-stage Johnson octal counter 4-stage Johnson octal counter 4-stage Johnson octal counter 4-stage Johnson octal counter
Counter Width 4 bit 4 bit 4 bit 4 bit
Clock Edge Positive edge Positive edge Positive edge Positive edge
Supply Voltage Range 3 V to 18 V 3 V to 18 V 3 V to 18 V 3 V to 18 V
Decoded Outputs 8 outputs 8 outputs 8 outputs 8 outputs
Output Behavior Spike-free decoded outputs Spike-free decoded outputs Spike-free decoded outputs Spike-free decoded outputs
Output Transition Positive-going clock edge Positive-going clock edge Positive-going clock edge Positive-going clock edge

Penyeberangsung Jelas

  • Integrated Johnson counter and octal decoder (vsMC14022BCPG)
  • Eight individually decoded timing outputs (vsA binary counter with external decoding)
  • Spike-free Johnson-counter output behavior (vsMC14022BDG)

Catatan Desain

Place the supply-decoupling capacitor close to the MC14022BD power and ground pins, and keep the clock route short and isolated from the eight decoded outputs. The positive-going clock edge causes several decoded outputs to change state around the same timing event, so inductive and capacitive coupling on clock or output traces can create unwanted transitions in downstream logic.

Design cascaded counters around a consistent positive-edge clock convention. Check propagation delay, output transition time, and clock-to-output timing in the manufacturer datasheet before selecting the maximum operating frequency. At high fan-out, use short traces, a ground reference, and buffered clock distribution rather than relying on a general-purpose output to drive multiple counter inputs.

Do not treat the decoded outputs as an ordinary binary count. The MC14022BD generates eight decoded, mutually timed outputs whose transitions occur on the positive-going clock edge. Reset-state behavior, active levels, and clock polarity should therefore be confirmed in the pin-description and timing sections before connecting outputs to latches, relays, or firmware-controlled sequencing logic.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

The MC14022B manufacturer datasheet is the technical source for the counter architecture, supply range, output behavior, and package. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the current manufacturer product or material documentation.

Data disahkan pada: 2026-11-16 — data yang disahkan dan disusun semula oleh pasukan kejuruteraan komponen XAIPART

Pencarian Berhubungan

MC14022BD datasheet MC14022BD pinout MC14022BD datasheet pdf MC14022BD equivalent MC14022BD replacement MC14022BD cross reference MC14022BD vs MC14022BDG MC14022BD price MC14022BD stock onsemi MC14022BD MC14022BD 16-SOIC counter MC14022BD 3V 18V octal counter

Komponen dan Tanda berkaitan

onsemi MC14022BD MC14022BDG MC14022BDR2 MC14022BDEBS octal counter Johnson counter binary counter counter and divider CMOS logic IC logic gate frequency divider positive-edge clock built-in code converter spike-free output 16-SOIC SOIC family surface mount SMD package 3 V to 18 V supply digital sequencing waveform generation industrial timing output decoding
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ