MC9S08AC48CFDE - 8-bit 40MHz 48KB Flash MCU | NXP
MPN: MC9S08AC48CFDE ✗ Akhir HayatMC9S08AC48CFDE Ringkasan
An 8-bit microcontroller is a single-chip processor that executes instructions on 8-bit data words and integrates CPU, memory, and peripherals on one die. Within the system hierarchy, the HCS08 CPU sits at the core, surrounded by a bus matrix connecting Flash, RAM, and peripherals such as timers, serial interfaces, and ADC, forming a complete embedded power-and-control subsystem. The MC9S08AC48CFDE belongs to the S08AC family, the third family in the Flexis series, where 8-bit S08 devices are pin-, peripheral-, and tool-compatible with 32-bit ColdFire MCF51AC devices.
Key features include the 40 MHz HCS08 central processor unit, 48KB (48K x 8) Flash program memory with in-application reprogramming, 8KB RAM, and 38 general-purpose I/O. The wide 2.7V to 5.5V supply range allows direct operation from 3.3V and 5V rails, simplifying mixed-voltage industrial designs.
Technically, the HCS08 core is a fully static CISC CPU derived from the HC08 architecture, delivering up to 20 MHz internal bus throughput. The Flexis AC family shares a common peripheral set across 8-bit and 32-bit members, giving engineers a migration path from 8-bit to 32-bit ColdFire without PCB redesign - a distinctive NXP (formerly Freescale) design strategy.
Typical applications include industrial control, consumer appliance control, motor control, and building automation nodes where moderate code density (48KB Flash) and rich I/O are required. It also fits well in legacy S08AC designs needing replacement stock.
Design consideration: note that this part is now NRND (Not Recommended for New Designs) per the NXP product page, so new designs should target the Flexis 32-bit MCF51AC pin-compatible successors or evaluate remaining-lifetime implications.
This page synthesizes distributor pricing, verified family drop-in alternatives, comparison tables, and practical design notes not found on the manufacturer product page alone.
Pilihan pengganti yang segera untuk MC9S08AC48CFDE — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera MC9S08AC48CFDE (sama faktor bentuk dan kaki) — berbeza dalam Core Processor, Flash Memory, Lifecycle Status, Package, RoHS Status.
MC9S08AC60CFDE
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak DisahkanHubungi untuk harga
Lihat Datasheet →MC9S08AC32CFDE
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak DisahkanHubungi untuk harga
Lihat Datasheet →MC9S08AC48CFGE
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
MC9S08AC60MFDE
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
MC9S08AC128CFDE
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif rujukan (tidak dalam katalog)
MC9S08AC48CFDE Penilaian maksimum & Ciri-ciri Elektrik
| Core Processor | S08 (HCS08) |
| Core Size | 8-Bit |
| Speed | 40 MHz CPU / 20 MHz internal bus |
| Flash Memory | 48KB (48K x 8) |
| RAM Size | 8KB |
| Supply Voltage Range | 2.7 V to 5.5 V |
| I/O Count | 38 |
| Kemasan | 48-QFN-EP (7x7 mm) / 48-VFQFN Exposed Pad |
| Jenis Pemasangan | Surface Mount |
| Architecture | CISC, HC08-derived HCS08 |
| Series | S08AC (Flexis series) |
| Jenis Ingatan | Flash (ROM Type: Flash) |
| Status RoHS | RoHS Compliant |
| Status Lingkungan Hidup | NRND (Not Recommended for New Designs) |
| Kiraan Pin | 48 |
Panduan Konfigurasi Pin MC9S08AC48CFDE 48-qfn-ep (7x7 mm) / 48-vfqfn exposed pad
Konfigurasi pin untuk MC9S08AC48CFDE (48-qfn-ep (7x7 mm) / 48-vfqfn exposed pad pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.
Tiada data garisan pin yang diperoleh untuk MC9S08AC48CFDE.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
MC9S08AC48CFDE patut untuk 6 aplikasis: Industrial Control Systems, Home Appliance Control, Motor Control and Drivers, Building Automation Nodes, Consumer Electronics and White Goods, Legacy S08AC Platform Maintenance.
Industrial Control Systems
The MC9S08AC48CFDE fits industrial control nodes that need deterministic 8-bit control with substantial I/O: its 40 MHz HCS08 core (20 MHz internal bus) provides adequate loop speed for PID control of temperature, pressure, and conveyor processes, while 38 I/O lines directly drive relays, optocouplers, and front-panel indicators without port expanders. The 2.7V to 5.5V supply range allows operation from noisy industrial 5V rails and direct interface with legacy 5V sensor levels, and 48KB Flash holds protocol stacks plus a bootloader for field firmware updates over RS-485 or CAN in factory automation cabinets.
Disebarkan
Home Appliance Control
Appliance mainboards benefit from the MC9S08AC48CFDE's combination of 48KB Flash, 8KB RAM, and 38 I/O in a compact 7x7 mm QFN-EP: one device can run UI scanning, buzzer/LED feedback, relay-driven heater and motor sequencing, and ADC-based sensor feedback (temperature probes, buttons) from the S08AC peripheral set. The wide 2.7V to 5.5V supply simplifies mains-derived linear supply designs, and the Flexis migration path to MCF51AC lets manufacturers scale features across product tiers without PCB respin - a key cost lever documented by NXP for the AC family.
Disebarkan
Motor Control and Drivers
In fan, pump, and small motor control, the MC9S08AC48CFDE's 40 MHz HCS08 core executes PWM generation, commutation, and current-loop servicing within the 20 MHz bus budget, while family timers generate complementary PWM outputs for MOSFET bridges. The 38 I/O include multiplexed timer and ADC channels used for back-EMF sensing and current shunt measurement. The exposed-pad QFN-48 improves thermal transfer to the PCB, helping dissipate heat in enclosed motor-control housings. In-circuit Flash reprogramming supports tuning of control constants during production and field service without socketed devices.
Disebarkan
Building Automation Nodes
HVAC dampers, lighting controllers, and access panels use the MC9S08AC48CFDE because 48KB Flash accommodates communication stacks while 38 I/O drive keypads, LCD segments, and actuator outputs. The 2.7V to 5.5V range tolerates supply sag on long cable runs common in building wiring, and the QFN-48's 7x7 mm footprint suits dense wall-mounted control boards. Since S08AC is tool-compatible across 32KB-to-128KB Flash members and with 32-bit MCF51AC Flexis parts, a single JTAG/SWD debug infrastructure and common peripheral set serve an entire building-automation product family.
Disebarkan
Consumer Electronics and White Goods
Cost-sensitive consumer products leverage the MC9S08AC48CFDE's single-chip integration: Flash, RAM, timers, serial interfaces, and ADC on one die reduce BOM count versus discrete MCU-plus-glue designs. The 40 MHz core headroom handles lidar-free proximity sensing, capacitive button scanning, and IR decoding concurrently, while 8KB RAM buffers communication frames. RoHS compliance supports global retail requirements. The QFN exposed pad simplifies two-layer board designs common in cost-optimized consumer goods, and family pin compatibility lets one PCB carry 32KB, 48KB, or 60KB Flash variants for feature tiering.
Disebarkan
Legacy S08AC Platform Maintenance
For designs already built on the S08AC family, the MC9S08AC48CFDE serves as continuity stock while platforms are audited for lifecycle risk. Because the family is pin-, peripheral-, and tool-compatible from MC9S08AC32 through AC128 and up to MCF51AC256 ColdFire devices, a last-time-buy of AC48 parts can bridge firmware freeze periods, and future respins can drop in the AC60/AC128 or migrate to the 32-bit Flexis without PCB redesign. Heisener reported 6,592 units in stock as of 2026-10-18, though NRND status means buyers should secure buffer inventory.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk MC9S08AC48CFDE — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | MC9S08AC60CFDE | MC9S08AC32CFDE | MC9S08AC48CFGE | MC9S08AC60MFDE | MC9S08AC128CFDE |
|---|---|---|---|---|---|---|
| Package | 48-QFN-EP (7x7 mm) | 48-QFN-EP (7x7 mm) - same | 48-QFN-EP (7x7 mm) - same | 48-QFN-EP (7x7 mm) - same | 48-QFN-EP (7x7 mm) - same | 48-QFN-EP (7x7 mm) - same |
| Brand | NXP Semiconductors (Freescale) | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Flash Memory | 48KB | 60KB | 32KB | 48KB | 60KB | 128KB |
| CPU Speed | 40 MHz (20 MHz bus) | 40 MHz (20 MHz bus) | 40 MHz (20 MHz bus) | 40 MHz (20 MHz bus) | 40 MHz (20 MHz bus) | 40 MHz (20 MHz bus) |
| Supply Voltage | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V |
| I/O Count | 38 | 38 | 38 | 38 | 38 | 38 |
Penyeberangsung Jelas
- Flexis 8-bit to 32-bit migration path (vsMC9S08AC128CFDE)
- Balanced 48KB Flash / 8KB RAM midpoint (vsMC9S08AC32CFDE)
- Room for firmware growth without respin (vsMC9S08AC60CFDE)
Catatan Desain
The single most important design consideration is lifecycle: NXP lists MC9S08AC48CFDE as NRND on its product page. Before committing a PCB to this part, secure a last-time-buy window or design the footprint against the Flexis migration path - the S08AC family is pin-, peripheral-, and tool-compatible with 32-bit MCF51AC256/128 ColdFire devices, so a socket-compatible footprint protects against end-of-life disruption. Also verify the suffix code (CFDE) encodes your required temperature range and packing in the NXP ordering table.
Operate the MCU from a 2.7V to 5.5V rail per the datasheet. If the board mixes 3.3V and 5V domains, remember HCS08 I/O thresholds are supply-referenced - a 5V-powered AC48 driving 3.3V-only inputs may violate their maximum ratings. Add 0.1 uF ceramic decoupling on each supply pin pair plus bulk 10 uF near the regulator, and connect the QFN-48 exposed pad to a solid ground pour for both grounding and heat spreading.
The 48-QFN exposed pad (7x7 mm) requires a matching center land pattern with via array to the ground plane; use approximately 5x5 via fence (0.3 mm vias) under the pad and solder-mask-defined apertures on perimeter pads to prevent solder wicking shorts. Verify pin-1 orientation against the S08AC datasheet pinout diagram before generating the footprint - QFN pads are invisible after reflow, making misorientation costly to rework.
Maklumat Kesediaan
RoHS compliant per distributor listings (digchip: ROHS COMPLIANT, QFN-48). REACH, lead-free, halogen-free and conflict-minerals status not stated in the provided data - verify on the NXP product page environmental section.
