MC9S08AC48CFDE - 8-bit 40MHz 48KB Flash MCU | NXP
Teilenummer: MC9S08AC48CFDE ✗ Abgekündigt| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $5.86 | $5,86 |
| 10 | $5.57 | $55,70 |
| 100 | $5.27 | $527,00 |
| 500 | $5.01 | $2.505,00 |
| 1.000 | $4.76 | $4.760,00 |
MC9S08AC48CFDE Übersicht
An 8-bit microcontroller is a single-chip processor that executes instructions on 8-bit data words and integrates CPU, memory, and peripherals on one die. Within the system hierarchy, the HCS08 CPU sits at the core, surrounded by a bus matrix connecting Flash, RAM, and peripherals such as timers, serial interfaces, and ADC, forming a complete embedded power-and-control subsystem. The MC9S08AC48CFDE belongs to the S08AC family, the third family in the Flexis series, where 8-bit S08 devices are pin-, peripheral-, and tool-compatible with 32-bit ColdFire MCF51AC devices.
Key features include the 40 MHz HCS08 central processor unit, 48KB (48K x 8) Flash program memory with in-application reprogramming, 8KB RAM, and 38 general-purpose I/O. The wide 2.7V to 5.5V supply range allows direct operation from 3.3V and 5V rails, simplifying mixed-voltage industrial designs.
Technically, the HCS08 core is a fully static CISC CPU derived from the HC08 architecture, delivering up to 20 MHz internal bus throughput. The Flexis AC family shares a common peripheral set across 8-bit and 32-bit members, giving engineers a migration path from 8-bit to 32-bit ColdFire without PCB redesign - a distinctive NXP (formerly Freescale) design strategy.
Typical applications include industrial control, consumer appliance control, motor control, and building automation nodes where moderate code density (48KB Flash) and rich I/O are required. It also fits well in legacy S08AC designs needing replacement stock.
Design consideration: note that this part is now NRND (Not Recommended for New Designs) per the NXP product page, so new designs should target the Flexis 32-bit MCF51AC pin-compatible successors or evaluate remaining-lifetime implications.
This page synthesizes distributor pricing, verified family drop-in alternatives, comparison tables, and practical design notes not found on the manufacturer product page alone.
Drop-in-Alternativen für MC9S08AC48CFDE – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit MC9S08AC48CFDE (gleiche Bauform und Footprint) – abweichend in Core Processor, Flash Memory, Lifecycle Status, Package, RoHS Status.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
MC9S08AC60CFDE
✅ Drop-In ⚠️ Spezifikationen ungeprüft✓ Auf Lager
$8.6 / Stück
Datenblatt ansehen →MC9S08AC32CFDE
✅ Drop-In ⚠️ Spezifikationen ungeprüft✓ Auf Lager
$3.02 / Stück
Datenblatt ansehen →MC9S08AC48CFGE
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
MC9S08AC60MFDE
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
MC9S08AC128CFDE
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
MC9S08AC48CFDE Grenzwerte & elektrische Eigenschaften
| Core Processor | S08 (HCS08) |
| Core Size | 8-Bit |
| Speed | 40 MHz CPU / 20 MHz internal bus |
| Flash Memory | 48KB (48K x 8) |
| RAM Size | 8KB |
| Supply Voltage Range | 2.7 V to 5.5 V |
| I/O Count | 38 |
| Gehäuse | 48-QFN-EP (7x7 mm) / 48-VFQFN Exposed Pad |
| Montageart | Surface Mount |
| Architecture | CISC, HC08-derived HCS08 |
| Series | S08AC (Flexis series) |
| Speichertyp | Flash (ROM Type: Flash) |
| RoHS-Status | RoHS Compliant |
| Lebenszyklusstatus | NRND (Not Recommended for New Designs) |
| Pin-Anzahl | 48 |
MC9S08AC48CFDE 48-qfn-ep (7x7 mm) / 48-vfqfn exposed pad Pinbelegungsleitfaden
Pinbelegung für MC9S08AC48CFDE (48-qfn-ep (7x7 mm) / 48-vfqfn exposed pad-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für MC9S08AC48CFDE.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
MC9S08AC48CFDE ist geeignet für 6 Anwendungs: Industrial Control Systems, Home Appliance Control, Motor Control and Drivers, Building Automation Nodes, Consumer Electronics and White Goods, Legacy S08AC Platform Maintenance.
Industrial Control Systems
The MC9S08AC48CFDE fits industrial control nodes that need deterministic 8-bit control with substantial I/O: its 40 MHz HCS08 core (20 MHz internal bus) provides adequate loop speed for PID control of temperature, pressure, and conveyor processes, while 38 I/O lines directly drive relays, optocouplers, and front-panel indicators without port expanders. The 2.7V to 5.5V supply range allows operation from noisy industrial 5V rails and direct interface with legacy 5V sensor levels, and 48KB Flash holds protocol stacks plus a bootloader for field firmware updates over RS-485 or CAN in factory automation cabinets.
Empfohlen
Home Appliance Control
Appliance mainboards benefit from the MC9S08AC48CFDE's combination of 48KB Flash, 8KB RAM, and 38 I/O in a compact 7x7 mm QFN-EP: one device can run UI scanning, buzzer/LED feedback, relay-driven heater and motor sequencing, and ADC-based sensor feedback (temperature probes, buttons) from the S08AC peripheral set. The wide 2.7V to 5.5V supply simplifies mains-derived linear supply designs, and the Flexis migration path to MCF51AC lets manufacturers scale features across product tiers without PCB respin - a key cost lever documented by NXP for the AC family.
Empfohlen
Motor Control and Drivers
In fan, pump, and small motor control, the MC9S08AC48CFDE's 40 MHz HCS08 core executes PWM generation, commutation, and current-loop servicing within the 20 MHz bus budget, while family timers generate complementary PWM outputs for MOSFET bridges. The 38 I/O include multiplexed timer and ADC channels used for back-EMF sensing and current shunt measurement. The exposed-pad QFN-48 improves thermal transfer to the PCB, helping dissipate heat in enclosed motor-control housings. In-circuit Flash reprogramming supports tuning of control constants during production and field service without socketed devices.
Empfohlen
Building Automation Nodes
HVAC dampers, lighting controllers, and access panels use the MC9S08AC48CFDE because 48KB Flash accommodates communication stacks while 38 I/O drive keypads, LCD segments, and actuator outputs. The 2.7V to 5.5V range tolerates supply sag on long cable runs common in building wiring, and the QFN-48's 7x7 mm footprint suits dense wall-mounted control boards. Since S08AC is tool-compatible across 32KB-to-128KB Flash members and with 32-bit MCF51AC Flexis parts, a single JTAG/SWD debug infrastructure and common peripheral set serve an entire building-automation product family.
Empfohlen
Consumer Electronics and White Goods
Cost-sensitive consumer products leverage the MC9S08AC48CFDE's single-chip integration: Flash, RAM, timers, serial interfaces, and ADC on one die reduce BOM count versus discrete MCU-plus-glue designs. The 40 MHz core headroom handles lidar-free proximity sensing, capacitive button scanning, and IR decoding concurrently, while 8KB RAM buffers communication frames. RoHS compliance supports global retail requirements. The QFN exposed pad simplifies two-layer board designs common in cost-optimized consumer goods, and family pin compatibility lets one PCB carry 32KB, 48KB, or 60KB Flash variants for feature tiering.
Empfohlen
Legacy S08AC Platform Maintenance
For designs already built on the S08AC family, the MC9S08AC48CFDE serves as continuity stock while platforms are audited for lifecycle risk. Because the family is pin-, peripheral-, and tool-compatible from MC9S08AC32 through AC128 and up to MCF51AC256 ColdFire devices, a last-time-buy of AC48 parts can bridge firmware freeze periods, and future respins can drop in the AC60/AC128 or migrate to the 32-bit Flexis without PCB redesign. Heisener reported 6,592 units in stock as of 2026-10-18, though NRND status means buyers should secure buffer inventory.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für MC9S08AC48CFDE – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | MC9S08AC60CFDE | MC9S08AC32CFDE | MC9S08AC48CFGE | MC9S08AC60MFDE | MC9S08AC128CFDE |
|---|---|---|---|---|---|---|
| Package | 48-QFN-EP (7x7 mm) | 48-QFN-EP (7x7 mm) - same | 48-QFN-EP (7x7 mm) - same | 48-QFN-EP (7x7 mm) - same | 48-QFN-EP (7x7 mm) - same | 48-QFN-EP (7x7 mm) - same |
| Brand | NXP Semiconductors (Freescale) | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Flash Memory | 48KB | 60KB | 32KB | 48KB | 60KB | 128KB |
| CPU Speed | 40 MHz (20 MHz bus) | 40 MHz (20 MHz bus) | 40 MHz (20 MHz bus) | 40 MHz (20 MHz bus) | 40 MHz (20 MHz bus) | 40 MHz (20 MHz bus) |
| Supply Voltage | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V |
| I/O Count | 38 | 38 | 38 | 38 | 38 | 38 |
Wichtigste Unterscheidungsmerkmale
- Flexis 8-bit to 32-bit migration path (vs. MC9S08AC128CFDE)
- Balanced 48KB Flash / 8KB RAM midpoint (vs. MC9S08AC32CFDE)
- Room for firmware growth without respin (vs. MC9S08AC60CFDE)
Designhinweise
The single most important design consideration is lifecycle: NXP lists MC9S08AC48CFDE as NRND on its product page. Before committing a PCB to this part, secure a last-time-buy window or design the footprint against the Flexis migration path - the S08AC family is pin-, peripheral-, and tool-compatible with 32-bit MCF51AC256/128 ColdFire devices, so a socket-compatible footprint protects against end-of-life disruption. Also verify the suffix code (CFDE) encodes your required temperature range and packing in the NXP ordering table.
Operate the MCU from a 2.7V to 5.5V rail per the datasheet. If the board mixes 3.3V and 5V domains, remember HCS08 I/O thresholds are supply-referenced - a 5V-powered AC48 driving 3.3V-only inputs may violate their maximum ratings. Add 0.1 uF ceramic decoupling on each supply pin pair plus bulk 10 uF near the regulator, and connect the QFN-48 exposed pad to a solid ground pour for both grounding and heat spreading.
The 48-QFN exposed pad (7x7 mm) requires a matching center land pattern with via array to the ground plane; use approximately 5x5 via fence (0.3 mm vias) under the pad and solder-mask-defined apertures on perimeter pads to prevent solder wicking shorts. Verify pin-1 orientation against the S08AC datasheet pinout diagram before generating the footprint - QFN pads are invisible after reflow, making misorientation costly to rework.
Compliance-Informationen
RoHS compliant per distributor listings (digchip: ROHS COMPLIANT, QFN-48). REACH, lead-free, halogen-free and conflict-minerals status not stated in the provided data - verify on the NXP product page environmental section.
