NXP Semiconductors

MC9S08SH4CWJR - 8-Bit 40MHz MCU with 4KB Flash | NXP

MPN: MC9S08SH4CWJR ✓ Aktif
5 V Vdss 20-pin SOIC Package 40 MHz Speed 4 KB (4K x 8 bits) Memory
MOQ: 1 |

MC9S08SH4CWJR Ringkasan

The NXP Semiconductors MC9S08SH4CWJR is an 8-bit HCS08 microcontroller with a 40 MHz CPU, 4 KB of flash memory, and integrated analog peripherals for precision-control designs. The device is associated with a 20-pin SOIC package, operates from a 5 V supply, and supports high-speed control applications. Its S08 architecture combines an 8-bit CPU, on-chip program memory, and hardware peripherals in a compact surface-mount package.

A microcontroller is a programmable semiconductor that integrates a CPU core, memory, and peripherals such as timers, comparators, and communication interfaces on one integrated circuit. The MC9S08SH4CWJR belongs to the HCS08 family, which sits within the broader hierarchy of embedded controllers, 8-bit microcontrollers, and integrated circuits. The S08 family emphasizes cost-conscious embedded control, fast execution, and compatibility among related devices, allowing a common hardware and software approach across compact control products.

The principal specifications include an 8-bit CPU operating at up to 40 MHz, 4 KB of flash program memory, and a nominal 5 V operating environment. Integrated analog peripherals support precision-control applications, while the high-speed core enables rapid control-loop execution. The 20-pin SOIC option provides a familiar surface-mount footprint and is suitable for designs that do not require the smallest possible package.

The enhanced HCS08 CPU uses the HC08 instruction set with the added BGND instruction and can support as many as 32 interrupt and reset sources. Its bus-oriented design permits efficient peripheral integration and predictable control of timing-sensitive operations. The 4 KB flash allocation is appropriate for compact firmware containing initialization, state logic, and dedicated control routines without requiring a large external memory interface.

Typical applications include small motor and actuator controllers, appliance control modules, temperature-control products, sensor conditioning systems, and industrial automation peripherals. The MCU is particularly relevant when a design needs a fast 8-bit control engine, analog comparison functions, and a 5 V supply in a compact embedded package.

For PCB design, preserve the pin assignments and decoupling requirements defined by the manufacturer datasheet for the exact ordering code. Confirm the package interpretation against the selected MCU before layout because published listings associate the CWJ family with a 20-pin SOIC, while another distributor record also contains QFN-24 package information for the same searchable MPN.

This product page combines the verified technical highlights, commercial sourcing workflow, same-family alternatives, comparison parameters, and practical selection guidance. The drop-in candidates are restricted to documented same-package options, and each alternative clearly identifies differences in flash capacity or related family parameters.

Pilihan pengganti yang segera untuk MC9S08SH4CWJR — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

Varietas dalam siri ini

Model serupa yang kompatibel dengan pengganti yang segera MC9S08SH4CWJR (sama faktor bentuk dan kaki) — berbeza dalam Package, Flash Memory, Interrupt and Reset Sources, ADC Resolution, Analog-to-Digital Converter.

NXP Semiconductors
Package: 20-SOIC (SOIC-20, narrow body)
Interrupt and Reset Sources: Up to 40
Analog-to-Digital Converter: 12-bit ADC
Bandingkan Dengan MC9S08SH4CWJR →
NXP Semiconductors
ADC Resolution: 10 bit
Bandingkan Dengan MC9S08SH4CWJR →
NXP Semiconductors
Flash Memory: 8 KB
Analog-to-Digital Converter: ADC
Bandingkan Dengan MC9S08SH4CWJR →
NXP Semiconductors
Flash Memory: 8 KB
ADC Resolution: 10 bits
Bandingkan Dengan MC9S08SH4CWJR →

MC9S08SH4CWJ

✅ Masuk Drop-In
NXP Semiconductors
📦 20-pin SOIC
8-bit S08 microcontroller · 40 MHz · 4 KB (4K x 8) · 256 B · 8 bit · 10 bit · 17 · 2.7 V to 5.5 V

Hubungi untuk harga

Lihat Datasheet →

MC9S08SH8CWJ

✅ Masuk Drop-In
NXP Semiconductors
📦 20-pin SOIC
8-bit S08SH microcontroller · Enhanced HCS08 core · 40 MHz · 8 KB · 8K x 8 bits · 8-bit · 5 V · 20-pin SOIC

Hubungi untuk harga

Lihat Datasheet →

MC9S08SH8MWJ

✅ Masuk Drop-In
NXP Semiconductors
📦 20-pin SOIC
8-bit S08 CISC microcontroller · S08 core · 40 MHz · 8 KB · 8K x 8 bits · 512 bytes · 3.3 V to 5 V · 20-pin SOIC

Hubungi untuk harga

Lihat Datasheet →

MC9S08SH4CWJR Penilaian maksimum & Ciri-ciri Elektrik

Product Type 8-bit HCS08 Microcontroller
Maximum CPU Frequency 40 MHz
CPU Architecture Enhanced HCS08 8-bit core
Instruction Set HC08 instruction set with added BGND instruction
Flash Memory 4 KB (4K x 8 bits)
Tegangan Pemberi Arus 5 V
Kemasan 20-pin SOIC
Kiraan Pin 20 pins
Jenis Pemasangan Surface Mount
Interrupt and Reset Sources Up to 32 sources
Integrated Analog Peripherals Comparator and precision-control peripherals
Jenis Ingatan Flash

Panduan Konfigurasi Pin MC9S08SH4CWJR 20-pin soic

Konfigurasi pin untuk MC9S08SH4CWJR (20-pin soic pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.

Garis bentuk pengecah pakai 20-pin soic untuk MC9S08SH4CWJR

Tiada data garisan pin yang diperoleh untuk MC9S08SH4CWJR.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

MC9S08SH4CWJR patut untuk 6 aplikasis: Small Motor Control, Appliance Control Module, Temperature Control, Industrial Sensor Interface, LED Lighting Controller, Embedded Automation Controller.

⚡

Small Motor Control

The MC9S08SH4CWJR fits compact 5 V motor-control modules because its 40 MHz 8-bit HCS08 core can execute timing and state-control routines quickly, while integrated analog peripherals support sensing and threshold decisions. The MCU can coordinate inputs, output switching commands, fault flags, and protection logic from the same 20-pin SOIC device. Its 4 KB Flash capacity is suitable for a focused firmware image, but the control algorithm and diagnostic routines must be sized against that limit. Compared with a larger control platform, the S08SH architecture reduces logic overhead and simplifies the PCB while retaining fast control-loop execution.

🏭

Appliance Control Module

MC9S08SH4CWJR is appropriate for appliance controls that combine digital sequencing, user inputs, and simple analog sensing on a 5 V rail. Its 40 MHz processing speed supports responsive switch debouncing, motor or heater timing, and state-machine execution, while the integrated analog peripherals can simplify comparisons around temperature, level, or light-related thresholds. The 20-pin SOIC package offers a conventional surface-mount footprint for compact control boards. Firmware should reserve enough of the 4 KB Flash for safety checks and diagnostics rather than relying only on the nominal memory capacity.

💊

Temperature Control

The MC9S08SH4CWJR can serve as the controller in a compact temperature-control product where a sensor signal must be compared against set points and translated into heater or cooling output commands. The 40 MHz 8-bit core provides ample execution speed for filtering, hysteresis, timed control, and fault handling, while integrated analog peripherals support precision-control architectures. Operating from 5 V also aligns with many appliance and industrial peripheral platforms. Designers should check the exact analog-input limits, ADC resources, and package pin assignments in the manufacturer documentation and keep the 4 KB firmware within its documented limits.

🧩

Industrial Sensor Interface

MC9S08SH4CWJR is useful for small industrial sensor interfaces that need local acquisition, threshold logic, status reporting, and actuator control. The high-speed HCS08 CPU supports deterministic handling of comparator and timer events, while up to 32 interrupt or reset sources provide flexibility for coordinating multiple external conditions. Its 4 KB Flash can hold a focused protocol stack and control logic without requiring a larger microcontroller in simple designs. For installations with severe electrical noise, extended temperature exposure, or safety-critical shutdown requirements, additional qualification and isolation should be evaluated at the system level.

💡

LED Lighting Controller

The MC9S08SH4CWJR can coordinate dimming sequences, button input, status indication, and timing functions in a 5 V LED-control product. Its 40 MHz 8-bit execution capability supports PWM-related routines and responsive user-interface behavior, while integrated analog peripherals can assist with threshold or sensing functions. The 20-pin SOIC package provides enough external connectivity for control outputs and communication signals in a compact design. Firmware should include channel-update ordering and stable timer configuration, and the chosen LED driver interface should remain electrically compatible with the MCU supply and pin requirements.

🏭

Embedded Automation Controller

MC9S08SH4CWJR fits embedded automation blocks that perform local sequencing, pulse generation, monitoring, and conditional outputs without requiring a full application processor. The enhanced HCS08 core handles rapid control tasks, and the integrated analog peripherals support comparisons used in threshold-based automation. Because the device operates from 5 V and includes 4 KB of Flash, it is well matched to focused legacy-compatible control nodes where an 8-bit architecture reduces software and hardware complexity. Engineers should validate interrupt priorities, watchdog requirements, and expansion memory assumptions before deploying it in safety-related automation equipment.

What is the MC9S08SH4CWJR?
The MC9S08SH4CWJR is a 5 V, 8-bit HCS08 microcontroller with a maximum CPU frequency of 40 MHz and 4 KB of flash memory. According to the manufacturer product information, the device belongs to the S08 family and integrates analog peripherals for precision-control applications. Distributed purchasing records identify the target as a 20-pin SOIC device, although package metadata should be confirmed against the exact ordering information before PCB layout.
What are the key specifications of MC9S08SH4CWJR?
The key specifications are an enhanced 8-bit HCS08 CPU, a 40 MHz maximum operating frequency, 4 KB of flash memory, a 5 V supply, and a 20-pin SOIC package. The manufacturer information also describes integrated analog peripherals suitable for precision control. The CPU supports the HC08 instruction set with the added BGND instruction and can handle up to 32 interrupt and reset sources, making the part suitable for compact embedded-control firmware.
Where can I download the MC9S08SH4CWJR datasheet PDF?
The MC9S08SH4CWJR datasheet can be obtained from the NXP product page for the MC9S08SH4CWJ ordering family or from the manufacturer-linked PDF indexed for the target. The family document covers the enhanced HCS08 core, 4 KB flash configuration, 40 MHz operation, analog peripherals, electrical characteristics, and package information. Use the pin-description and connection diagrams from that document when assigning PCB nets or confirming the package variant.
Where can I find the MC9S08SH4CWJR pinout?
The MC9S08SH4CWJR pinout must be taken from the manufacturer pin-description table for the exact package ordering code. Purchasing records most consistently identify this device as a 20-pin SOIC, while one distributor metadata record also associates the searchable MPN with a 24-pin QFN package. Before routing a PCB, check the package dimension diagram and pin table in the S08SH family datasheet against the reel label and manufacturer ordering information.
What can replace MC9S08SH4CWJR?
MC9S08SH4CWJ is the closest documented drop-in candidate because it represents the same 4 KB Flash, 40 MHz, 5 V MC9S08SH4 device in the 20-pin SOIC package; the difference is the orderable suffix rather than the core device configuration. MC9S08SH8CWJ and MC9S08SH8MWJ are also 20-pin SOIC family options, but they increase flash capacity to 8 KB. Firmware and memory requirements must be reviewed before using either larger-memory part as a replacement.
Is MC9S08SH4CWJR the same as MC9S08SH4CWJ?
MC9S08SH4CWJ and MC9S08SH4CWJR identify closely related orderable versions of the same 4 KB Flash MC9S08SH4 device in a 20-pin SOIC package. Both are associated with a 40 MHz 8-bit HCS08 CPU and 5 V operation. The suffix can encode packaging or ordering characteristics, so engineers should confirm the manufacturer ordering table and reel labeling before treating the base part as a literal board-for-board substitution.
MC9S08SH4CWJR vs MC9S08SH8CWJ — which is better?
MC9S08SH4CWJR is preferable when 4 KB of Flash is sufficient and minimizing flash allocation is the main design goal. MC9S08SH8CWJ provides 8 KB of Flash while retaining the same 40 MHz S08 performance level and 20-pin SOIC package. Choose the 8 KB version when firmware growth, additional peripheral routines, or a larger boot/feature set requires more program memory; otherwise, the 4 KB device offers a more constrained memory footprint.
When should I choose MC9S08SH4CWJR over an 8 KB S08SH device?
Choose MC9S08SH4CWJR when the application fits comfortably within 4 KB of Flash and does not require the additional program space of an 8 KB device. Its 40 MHz CPU and integrated analog peripherals still support fast precision-control loops. Select an 8 KB same-package alternative when expected firmware growth, diagnostic functions, or added communication logic could push the 4 KB boundary, and confirm that the alternative retains the required peripheral and pin compatibility.
Is MC9S08SH4CWJR suitable for industrial control applications?
MC9S08SH4CWJR is suitable for compact 5 V industrial-control designs that fit within 4 KB of Flash and require fast 8-bit control. Its 40 MHz enhanced HCS08 CPU and integrated analog peripherals support responsive closed-loop functions, timers, and comparator-based decisions. For deployments with extended temperature requirements, functional safety needs, long-term program-memory retention, or extensive diagnostics, verify the exact device qualifications and choose a suitably rated MCU.
What is the lead time for MC9S08SH4CWJR?
The current lead time for MC9S08SH4CWJR should be requested through the Request a Quote form on this page, which allows the exact MPN, package suffix, and required production quantity to be checked. Availability can change with order volume and replenishment cycles. For production planning, include the reel quantity, target delivery date, and whether substitutions are acceptable so the sourcing response reflects the actual manufacturing requirement.
Where can I buy MC9S08SH4CWJR online?
Use the Request a Quote form on this page to request MC9S08SH4CWJR with the intended package suffix, reel quantity, and delivery target. The form focuses the request on the exact manufacturer part number rather than a generic MCU category, reducing the risk of receiving an incompatible flash-capacity or package option. Confirm the returned manufacturer name, exact MPN, date code, and packaging before releasing a purchase order.
What is the price of MC9S08SH4CWJR?
The current commercial price for MC9S08SH4CWJR is best obtained through the Request a Quote form on this page because it depends on exact suffix, reel quantity, order volume, and current availability. Submit the complete MPN and required quantities so the response can be tied to the requested configuration. Static prices can become stale and may not represent the package, date code, and delivery terms needed for a production order.
Is MC9S08SH4CWJR in stock?
Current stock for MC9S08SH4CWJR should be confirmed through the Request a Quote form on this page by entering the exact MPN and required quantity. Inventory status can vary by reel, date code, and regional fulfillment center, so a generic stock label is not sufficient for production planning. The quote response can include the available quantity, lead-time estimate, and packaging information needed for a purchasing decision.
What is the best NXP equivalent for MC9S08SH4CWJR?
MC9S08SH4CWJ is the closest NXP family equivalent because it retains the 4 KB Flash, 40 MHz CPU, 5 V operating class, and 20-pin SOIC package represented by the target ordering code. Its main practical difference is the orderable suffix, so package and reel marking must be checked. MC9S08SH8CWJ and MC9S08SH8MWJ are same-package alternatives when additional Flash is acceptable, but they are not identical memory configurations.
Does the MC9S08SH4CWJR include a comparator?
The MC9S08SH4CWJR includes integrated analog peripherals for precision control, and its manufacturer-family product information identifies a comparator as part of the device capability. The comparator can support threshold decisions, monitoring, and basic control-loop functions without requiring a separate external comparator. Review the manufacturer electrical characteristics and pin-description table for input range, response behavior, and the exact connection of each analog input before finalizing the schematic.

Data referensi kejuruteraan untuk MC9S08SH4CWJR — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose MC9S08SH4CWJR for a compact 5 V embedded-control design that operates at up to 40 MHz and comfortably fits within 4 KB of Flash. MC9S08SH4CWJ is the closest same-package option when the ordering suffix can be reconciled with the reel label and required device configuration. Consider MC9S08SH8CWJ when the firmware, diagnostics, or future feature set needs more program memory while retaining the 20-pin SOIC footprint and 40 MHz S08 performance class; its Flash capacity is twice that of the target. MC9S08SH8MWJ provides another same-package family path with 8 KB Flash, but its ordering characteristics and device configuration should be checked before substitution. Confirm the exact package, pin table, electrical limits, programming method, and firmware compatibility before approving any replacement.

Perbandingan dengan Gantian

Parametr Produk Ini MC9S08SH4CWJ MC9S08SH8CWJ MC9S08SH8MWJ
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors
Package 20-pin SOIC 20-pin SOIC 20-pin SOIC 20-pin SOIC
CPU Architecture 8-bit HCS08 8-bit HCS08 8-bit HCS08 8-bit HCS08
Maximum CPU Frequency 40 MHz 40 MHz 40 MHz 40 MHz
Flash Memory 4 KB 4 KB 8 KB 8 KB

Penyeberangsung Jelas

  • Closest documented same-package ordering option (vsMC9S08SH4CWJ)
  • Expanded flash option without changing the core speed class (vsMC9S08SH8CWJ)
  • Same-package family alternative with greater firmware capacity (vsMC9S08SH8MWJ)

Catatan Desain

Resolve the package discrepancy before releasing a PCB layout. Purchasing records most consistently identify MC9S08SH4CWJR as a 20-pin SOIC, but one distributor metadata record associates the searchable MPN with a 24-pin QFN package. Compare the physical dimensions, pin numbering, exposed-pad requirements, and reel label against the manufacturer ordering table. Treat the 20-pin SOIC mapping as applicable only after the exact packaged device has been confirmed.

Design the supply network for a 5 V MCU environment with local high-frequency bypass at the device power pins. The manufacturer pin table should be used to identify the supply and ground connections for the confirmed package. Keep switching-regulator and switching-node layouts away from sensitive analog inputs, because comparator and precision-control performance can be affected by high-frequency supply ripple even when the MCU itself executes at 40 MHz.

Do not assume the MC9S08SH8CWJ or MC9S08SH8MWJ is an unconditional functional equivalent. Their Flash capacity is 8 KB rather than 4 KB, so existing firmware may require adaptation if it depends on the original memory map, reset behavior, or device configuration. Review the manufacturer device comparison and programming documentation, then verify read-write protection, interrupt-vector layout, and application-code placement before production use.

Follow the manufacturer recommended decoupling and signal-routing layout after the exact package is confirmed. Place bypass capacitors close to the intended supply pins, keep analog and digital return currents controlled, and route timing-sensitive or communication nets away from sources of high-current switching. The 40 MHz CPU provides substantial execution headroom, but clean power and stable references remain important for repeatable analog measurements and comparator decisions.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

The available product information does not establish RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 is not applicable to this general-purpose microcontroller ordering code.

Pencarian Berhubungan

MC9S08SH4CWJR datasheet MC9S08SH4CWJR datasheet pdf MC9S08SH4CWJR pinout MC9S08SH4CWJR specifications MC9S08SH4CWJR equivalent MC9S08SH4CWJR replacement MC9S08SH4CWJR cross reference MC9S08SH4CWJR price MC9S08SH4CWJR stock NXP MC9S08SH4CWJR MC9S08SH4CWJR SOIC20 MC9S08SH4CWJR 40MHz 4KB flash MC9S08SH4CWJR vs MC9S08SH8CWJ MC9S08SH4CWJR precision control MC9S08SH4CWJR application circuit

Komponen dan Tanda berkaitan

NXP Semiconductors MC9S08SH4CWJR MC9S08SH4CWJ MC9S08SH8CWJ MC9S08SH8MWJ MC9S08SH16CWL MC9S08SH16CTL HCS08 MC9S08SH4CWJR 8-bit MCU 8-bit microcontroller embedded microcontroller integrated circuit semiconductor 40 MHz CPU 4 KB Flash 8 KB Flash 5 V supply HC08 instruction set BGND instruction comparator precision control 20-pin SOIC QFN family surface mount interrupt sources
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ