MC9S08SH4CWJR - 8-Bit 40MHz MCU with 4KB Flash | NXP
MPN: MC9S08SH4CWJR ✓ Hoạt độngMC9S08SH4CWJR Tóm tắt
A microcontroller is a programmable semiconductor that integrates a CPU core, memory, and peripherals such as timers, comparators, and communication interfaces on one integrated circuit. The MC9S08SH4CWJR belongs to the HCS08 family, which sits within the broader hierarchy of embedded controllers, 8-bit microcontrollers, and integrated circuits. The S08 family emphasizes cost-conscious embedded control, fast execution, and compatibility among related devices, allowing a common hardware and software approach across compact control products.
The principal specifications include an 8-bit CPU operating at up to 40 MHz, 4 KB of flash program memory, and a nominal 5 V operating environment. Integrated analog peripherals support precision-control applications, while the high-speed core enables rapid control-loop execution. The 20-pin SOIC option provides a familiar surface-mount footprint and is suitable for designs that do not require the smallest possible package.
The enhanced HCS08 CPU uses the HC08 instruction set with the added BGND instruction and can support as many as 32 interrupt and reset sources. Its bus-oriented design permits efficient peripheral integration and predictable control of timing-sensitive operations. The 4 KB flash allocation is appropriate for compact firmware containing initialization, state logic, and dedicated control routines without requiring a large external memory interface.
Typical applications include small motor and actuator controllers, appliance control modules, temperature-control products, sensor conditioning systems, and industrial automation peripherals. The MCU is particularly relevant when a design needs a fast 8-bit control engine, analog comparison functions, and a 5 V supply in a compact embedded package.
For PCB design, preserve the pin assignments and decoupling requirements defined by the manufacturer datasheet for the exact ordering code. Confirm the package interpretation against the selected MCU before layout because published listings associate the CWJ family with a 20-pin SOIC, while another distributor record also contains QFN-24 package information for the same searchable MPN.
This product page combines the verified technical highlights, commercial sourcing workflow, same-family alternatives, comparison parameters, and practical selection guidance. The drop-in candidates are restricted to documented same-package options, and each alternative clearly identifies differences in flash capacity or related family parameters.
Bộ thay thế dễ dàng lắp đặt cho MC9S08SH4CWJR — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với MC9S08SH4CWJR (cùng hình factor và footprint) — khác nhau ở Package, Flash Memory, Interrupt and Reset Sources, ADC Resolution, Analog-to-Digital Converter.
MC9S08SH4CWJ
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →MC9S08SH8CWJ
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →MC9S08SH8MWJ
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →MC9S08SH4CWJR Tỷ lệ tối đa & tính chất điện
| Product Type | 8-bit HCS08 Microcontroller |
| Maximum CPU Frequency | 40 MHz |
| CPU Architecture | Enhanced HCS08 8-bit core |
| Instruction Set | HC08 instruction set with added BGND instruction |
| Flash Memory | 4 KB (4K x 8 bits) |
| Điện áp cung cấp | 5 V |
| Hộp | 20-pin SOIC |
| Số chân | 20 pins |
| Kiểu lắp đặt | Surface Mount |
| Interrupt and Reset Sources | Up to 32 sources |
| Integrated Analog Peripherals | Comparator and precision-control peripherals |
| Kiểu bộ nhớ | Flash |
Hướng dẫn cấu hình chân MC9S08SH4CWJR 20-pin soic
Cấu hình chân cho MC9S08SH4CWJR (20-pin soic gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho MC9S08SH4CWJR.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
MC9S08SH4CWJR phù hợp cho 6 Áp dụngs: Small Motor Control, Appliance Control Module, Temperature Control, Industrial Sensor Interface, LED Lighting Controller, Embedded Automation Controller.
Small Motor Control
The MC9S08SH4CWJR fits compact 5 V motor-control modules because its 40 MHz 8-bit HCS08 core can execute timing and state-control routines quickly, while integrated analog peripherals support sensing and threshold decisions. The MCU can coordinate inputs, output switching commands, fault flags, and protection logic from the same 20-pin SOIC device. Its 4 KB Flash capacity is suitable for a focused firmware image, but the control algorithm and diagnostic routines must be sized against that limit. Compared with a larger control platform, the S08SH architecture reduces logic overhead and simplifies the PCB while retaining fast control-loop execution.
Được đề xuất
Appliance Control Module
MC9S08SH4CWJR is appropriate for appliance controls that combine digital sequencing, user inputs, and simple analog sensing on a 5 V rail. Its 40 MHz processing speed supports responsive switch debouncing, motor or heater timing, and state-machine execution, while the integrated analog peripherals can simplify comparisons around temperature, level, or light-related thresholds. The 20-pin SOIC package offers a conventional surface-mount footprint for compact control boards. Firmware should reserve enough of the 4 KB Flash for safety checks and diagnostics rather than relying only on the nominal memory capacity.
Được đề xuất
Temperature Control
The MC9S08SH4CWJR can serve as the controller in a compact temperature-control product where a sensor signal must be compared against set points and translated into heater or cooling output commands. The 40 MHz 8-bit core provides ample execution speed for filtering, hysteresis, timed control, and fault handling, while integrated analog peripherals support precision-control architectures. Operating from 5 V also aligns with many appliance and industrial peripheral platforms. Designers should check the exact analog-input limits, ADC resources, and package pin assignments in the manufacturer documentation and keep the 4 KB firmware within its documented limits.
Được đề xuất
Industrial Sensor Interface
MC9S08SH4CWJR is useful for small industrial sensor interfaces that need local acquisition, threshold logic, status reporting, and actuator control. The high-speed HCS08 CPU supports deterministic handling of comparator and timer events, while up to 32 interrupt or reset sources provide flexibility for coordinating multiple external conditions. Its 4 KB Flash can hold a focused protocol stack and control logic without requiring a larger microcontroller in simple designs. For installations with severe electrical noise, extended temperature exposure, or safety-critical shutdown requirements, additional qualification and isolation should be evaluated at the system level.
Được đề xuất
LED Lighting Controller
The MC9S08SH4CWJR can coordinate dimming sequences, button input, status indication, and timing functions in a 5 V LED-control product. Its 40 MHz 8-bit execution capability supports PWM-related routines and responsive user-interface behavior, while integrated analog peripherals can assist with threshold or sensing functions. The 20-pin SOIC package provides enough external connectivity for control outputs and communication signals in a compact design. Firmware should include channel-update ordering and stable timer configuration, and the chosen LED driver interface should remain electrically compatible with the MCU supply and pin requirements.
Được đề xuất
Embedded Automation Controller
MC9S08SH4CWJR fits embedded automation blocks that perform local sequencing, pulse generation, monitoring, and conditional outputs without requiring a full application processor. The enhanced HCS08 core handles rapid control tasks, and the integrated analog peripherals support comparisons used in threshold-based automation. Because the device operates from 5 V and includes 4 KB of Flash, it is well matched to focused legacy-compatible control nodes where an 8-bit architecture reduces software and hardware complexity. Engineers should validate interrupt priorities, watchdog requirements, and expansion memory assumptions before deploying it in safety-related automation equipment.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho MC9S08SH4CWJR — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | MC9S08SH4CWJ | MC9S08SH8CWJ | MC9S08SH8MWJ |
|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 20-pin SOIC | 20-pin SOIC | 20-pin SOIC | 20-pin SOIC |
| CPU Architecture | 8-bit HCS08 | 8-bit HCS08 | 8-bit HCS08 | 8-bit HCS08 |
| Maximum CPU Frequency | 40 MHz | 40 MHz | 40 MHz | 40 MHz |
| Flash Memory | 4 KB | 4 KB | 8 KB | 8 KB |
Bảo phân biệt quan trọng
- Closest documented same-package ordering option (vsMC9S08SH4CWJ)
- Expanded flash option without changing the core speed class (vsMC9S08SH8CWJ)
- Same-package family alternative with greater firmware capacity (vsMC9S08SH8MWJ)
Ghi chú thiết kế
Resolve the package discrepancy before releasing a PCB layout. Purchasing records most consistently identify MC9S08SH4CWJR as a 20-pin SOIC, but one distributor metadata record associates the searchable MPN with a 24-pin QFN package. Compare the physical dimensions, pin numbering, exposed-pad requirements, and reel label against the manufacturer ordering table. Treat the 20-pin SOIC mapping as applicable only after the exact packaged device has been confirmed.
Design the supply network for a 5 V MCU environment with local high-frequency bypass at the device power pins. The manufacturer pin table should be used to identify the supply and ground connections for the confirmed package. Keep switching-regulator and switching-node layouts away from sensitive analog inputs, because comparator and precision-control performance can be affected by high-frequency supply ripple even when the MCU itself executes at 40 MHz.
Do not assume the MC9S08SH8CWJ or MC9S08SH8MWJ is an unconditional functional equivalent. Their Flash capacity is 8 KB rather than 4 KB, so existing firmware may require adaptation if it depends on the original memory map, reset behavior, or device configuration. Review the manufacturer device comparison and programming documentation, then verify read-write protection, interrupt-vector layout, and application-code placement before production use.
Follow the manufacturer recommended decoupling and signal-routing layout after the exact package is confirmed. Place bypass capacitors close to the intended supply pins, keep analog and digital return currents controlled, and route timing-sensitive or communication nets away from sources of high-current switching. The 40 MHz CPU provides substantial execution headroom, but clean power and stable references remain important for repeatable analog measurements and comparator decisions.
Thông tin tuân thủ
The available product information does not establish RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 is not applicable to this general-purpose microcontroller ordering code.