MC9S12DJ64CPV - 16-Bit 25MHz 64KB MCU | NXP | Automotive
MPN: MC9S12DJ64CPV ✓ AktifMC9S12DJ64CPV Ringkasan
An HCS12 microcontroller is a 16-bit embedded controller positioned within the broader hierarchy of microcontrollers, embedded processors, and semiconductors. The MC9S12D family combines a conventional microcontroller core with memory-mapped peripherals for communications, timing, analog measurement, pulse-width modulation, interrupts, clock generation, and bus control. The D-family architecture supports pin-compatible device options, which can simplify product scaling when memory or peripheral requirements change.
The MC9S12DJ64CPV provides a 25 MHz operating clock, 64 KB of Flash memory, two asynchronous serial communications interfaces, two 8-channel 10-bit analog-to-digital converters, an 8-channel pulse-width modulator, and 20 discrete digital I/O lines. These resources suit systems that need deterministic peripheral interaction and flexible communication links without relying on an external memory interface for application code.
The HCS12 architecture uses a 16-bit CPU and integrates resource mapping, clock generation, interrupt control, and bus interfacing into the microcontroller platform. Its automotive-oriented product proposal identifies the HCS12 D-family as flash-based devices intended for multiplexing applications. The CPV package designation identifies the industrial-temperature, 112-lead LQFP configuration used on the MC9S12DJ64CPV.
Typical applications include automotive body and gateway controllers, vehicle multiplexing modules, sensor aggregation units, actuator controllers, and industrial equipment that benefits from a deterministic 16-bit architecture. The integrated serial interfaces support communication with sensors, transceivers, or external controllers, while the two 10-bit ADC channels groups support analog input acquisition and automotive signal conditioning.
PCB implementation should preserve the 20 mm by 20 mm LQFP land pattern and route high-current or sensitive signals away from adjacent digital inputs. The power, ground, clock, and decoupling pins must be connected according to the manufacturer device user guide. Firmware should also include startup, reset, clock, watchdog, and fault-handling routines suitable for safety-relevant automotive equipment.
This product page organizes the key electrical, timing, memory, peripheral, packaging, and application information for the MC9S12DJ64CPV. It also identifies directly relevant HCS12 D-family alternatives, clarifies replacement boundaries, and provides practical selection guidance for engineers working on automotive multiplexing and embedded vehicle-control systems.
Pilihan pengganti yang segera untuk MC9S12DJ64CPV — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera MC9S12DJ64CPV (sama faktor bentuk dan kaki) — berbeza dalam Architecture, Connectivity, EEPROM Size, Package, Peripherals.
MC9S12DJ64CPVE
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →MC9S12D64CPVE
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →MC9S12DJ64CFUE
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
MC9S12DJ64CPV Penilaian maksimum & Ciri-ciri Elektrik
| Product Type | 16-bit HCS12 flash microcontroller |
| Maximum CPU Frequency | 25 MHz |
| Program Memory | 64 KB Flash |
| Program Memory Organization | 64K x 8 bits |
| Architecture | HCS12 16-bit |
| Serial Communications Interfaces | 2 asynchronous serial communications interfaces |
| Analog-to-Digital Converters | 2 x 8-channel, 10-bit ADC |
| Pulse-Width Modulator Channels | 8 channels |
| Discrete Digital I/O Lines | 20 lines |
| Enhanced Capture Timer | 8-channel enhanced capture timer |
| Package Type | 112-lead LQFP |
| Package Dimensions | 20 mm x 20 mm |
| Jenis Pemasangan | Surface mount |
| Terminal Form | Gull wing |
| Temperature Grade | Industrial |
| Inter-IC Bus | Inter-IC Bus System resource mapping |
| Clock Generation | On-chip clock generation |
| Interrupt Control | On-chip interrupt control |
Panduan Konfigurasi Pin MC9S12DJ64CPV 20 mm x 20 mm
Konfigurasi pin untuk MC9S12DJ64CPV (20 mm x 20 mm pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.
Tiada data garisan pin yang diperoleh untuk MC9S12DJ64CPV.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
MC9S12DJ64CPV patut untuk 6 aplikasis: Automotive Multiplexing Gateway, Vehicle Sensor Aggregation Unit, Actuator and Motor Control Module, Body Control Module, Industrial Communications Controller, Automotive Diagnostic Interface.
Automotive Multiplexing Gateway
The MC9S12DJ64CPV fits an automotive multiplexing gateway because its 25 MHz HCS12 core provides deterministic control while the 64 KB Flash memory holds gateway and communication software. Two asynchronous serial communications interfaces allow connection to vehicle nodes, while 20 digital I/O lines handle discrete signals and the two 8-channel 10-bit ADC modules support diagnostic or sensor inputs. The 112-lead LQFP package also provides the pin count required for distributed I/O and power-management connections. Firmware must preserve timing margins and fault isolation between communication domains.
Disebarkan
Vehicle Sensor Aggregation Unit
The MC9S12DJ64CPV can aggregate inputs from multiple vehicle sensors through two 8-channel 10-bit ADC modules while its 20 digital I/O lines monitor discrete sensors and switches. The 16-bit architecture is appropriate for filtering and scaling measurements before data is forwarded over one of the two asynchronous serial interfaces. Its 64 KB Flash capacity supports application code, calibration constants, and communication routines. The design should assign analog and digital return paths carefully because automotive wiring can introduce ground offsets and transient interference.
Disebarkan
Actuator and Motor Control Module
The MC9S12DJ64CPV suits actuator-control modules that require coordinated digital commands, serial device communication, and timed outputs. Its 8-channel PWM block can generate multiple timing-dependent control signals, while the enhanced capture timer supports input measurement and event timing. The 25 MHz 16-bit CPU supplies enough processing bandwidth for command interpretation, state monitoring, and fault detection within a 64 KB Flash budget. Firmware must include output disable paths and safe-state behavior for every actuator when reset or communication failure occurs.
Disebarkan
Body Control Module
The MC9S12DJ64CPV can coordinate body-control functions that combine switch inputs, actuator outputs, serial communication, and diagnostic monitoring. Its 20 discrete digital I/O lines reduce the need for external logic when handling lamps, locks, or other vehicle signals, while two serial interfaces provide links to remote modules. The 64 KB Flash program memory accommodates state logic and communication protocols, and the 25 MHz clock supports responsive debouncing and event handling. Production designs should verify wake, reset, and brownout behavior against the complete electrical system.
Disebarkan
Industrial Communications Controller
The MC9S12DJ64CPV works as an industrial communications controller when deterministic local control must coexist with serial device connectivity. Its two asynchronous serial communications interfaces can connect to sensors, converters, or remote I/O, while the 20 digital I/O lines support local alarms and interlocks. The 16-bit CPU and 25 MHz clock support protocol timing and local calculations, and the 64 KB Flash memory holds application and configuration code. Industrial deployments should add appropriate transient, isolation, and surge protection beyond the controller itself.
Disebarkan
Automotive Diagnostic Interface
The MC9S12DJ64CPV is suitable for a vehicle diagnostic interface that must combine serial communication with discrete status lines and analog measurements. The two asynchronous serial interfaces can support diagnostic and external data channels, while the dual 8-channel 10-bit ADCs permit monitoring of supply or sensor voltages. A 16-bit processor provides straightforward data formatting and protocol handling within the device's 64 KB Flash limit. Diagnostic software should validate message integrity and implement timeout behavior so a failed node cannot block vehicle-level service functions.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk MC9S12DJ64CPV — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | MC9S12DJ64CPVE | MC9S12D64CPV | MC9S12DJ64CFUE |
|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 112-lead LQFP (20 mm x 20 mm) | 112-lead LQFP (20 mm x 20 mm) | 112-lead LQFP (20 mm x 20 mm) | 112-lead LQFP (20 mm x 20 mm) |
| CPU Architecture | 16-bit HCS12 | 16-bit HCS12 | 16-bit HCS12 D-family | 16-bit HCS12 |
| Maximum CPU Frequency | 25 MHz | 25 MHz | 25 MHz | 25 MHz |
Penyeberangsung Jelas
- Closest documented package alternative retains the complete core specification (vsMC9S12DJ64CPVE)
- Directly retains the industrial CPV configuration (vsMC9S12D64CPV)
- Documented HCS12D architecture supports scalable automotive designs (vsMC9S12DJ64CFUE)
Catatan Desain
Implement the 112-lead LQFP footprint exactly as defined by the manufacturer package drawing and route every power and ground connection directly to the corresponding pins. The 20 mm by 20 mm package provides enough land area for short escape routes, but analog inputs, serial communication lines, and timer signals still require deliberate placement. Decoupling capacitors should connect directly to the relevant supply and ground pins rather than through shared narrow traces.
Separate analog inputs from PWM, serial, and clock routing wherever the board geometry permits. The two 8-channel 10-bit ADC modules can be sensitive to ground offsets and switching-node coupling, particularly in vehicle systems sharing a harness with actuators. Use a stable analog ground region, minimize return-path discontinuities, and place input filtering close to the source. Firmware should also disable unused analog channels and digital inputs to reduce unnecessary switching activity.
Do not treat any HCS12 D-family pin-compatible member as a software-identical replacement without checking the device identifier, memory map, interrupt vectors, peripheral implementation, and package suffix. The MC9S12DJ64CPV is a 25 MHz device with 64 KB Flash, two serial interfaces, and dual 8-channel 10-bit ADCs. After changing the orderable suffix, rerun startup, clock, timer, ADC, communications, reset, and watchdog tests against the replacement device.
Follow the manufacturer recommendations for supply sequencing, reset release, and decoupling because incorrect power-up ordering can leave the HCS12 core or peripherals in an indeterminate state. Provide local bulk and high-frequency capacitance near the device and keep sensitive return paths short. In an automotive module, include the external protection and regulation required for load dump, reverse battery, and transient conditions; those requirements are not fulfilled solely by the microcontroller package.
Maklumat Kesediaan
The MC9S12DJ64CPV is identified as an industrial-temperature automotive HCS12 device, but its specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations are not stated in the cited product pages. Verify the current manufacturer declarations before production release.