NXP Semiconductors

MC9S12DJ64CPV - 16-Bit 25MHz 64KB MCU | NXP | Automotive

MPN: MC9S12DJ64CPV ✓ Nakahanda
112-lead LQFP Package 25 MHz Speed 64 KB Flash Memory
MOQ: 1 |

MC9S12DJ64CPV Ulas

The NXP Semiconductors MC9S12DJ64CPV is a 16-bit HCS12 automotive microcontroller operating at 25 MHz with 64 KB of embedded Flash memory in a 112-lead LQFP package measuring 20 mm by 20 mm. It belongs to the HCS12 D-family of flash-based control devices designed for automotive multiplexing and embedded control applications. The device combines a 16-bit CPU, on-chip communications interfaces, timing resources, analog conversion functions, and discrete digital I/O in one integrated package.

An HCS12 microcontroller is a 16-bit embedded controller positioned within the broader hierarchy of microcontrollers, embedded processors, and semiconductors. The MC9S12D family combines a conventional microcontroller core with memory-mapped peripherals for communications, timing, analog measurement, pulse-width modulation, interrupts, clock generation, and bus control. The D-family architecture supports pin-compatible device options, which can simplify product scaling when memory or peripheral requirements change.

The MC9S12DJ64CPV provides a 25 MHz operating clock, 64 KB of Flash memory, two asynchronous serial communications interfaces, two 8-channel 10-bit analog-to-digital converters, an 8-channel pulse-width modulator, and 20 discrete digital I/O lines. These resources suit systems that need deterministic peripheral interaction and flexible communication links without relying on an external memory interface for application code.

The HCS12 architecture uses a 16-bit CPU and integrates resource mapping, clock generation, interrupt control, and bus interfacing into the microcontroller platform. Its automotive-oriented product proposal identifies the HCS12 D-family as flash-based devices intended for multiplexing applications. The CPV package designation identifies the industrial-temperature, 112-lead LQFP configuration used on the MC9S12DJ64CPV.

Typical applications include automotive body and gateway controllers, vehicle multiplexing modules, sensor aggregation units, actuator controllers, and industrial equipment that benefits from a deterministic 16-bit architecture. The integrated serial interfaces support communication with sensors, transceivers, or external controllers, while the two 10-bit ADC channels groups support analog input acquisition and automotive signal conditioning.

PCB implementation should preserve the 20 mm by 20 mm LQFP land pattern and route high-current or sensitive signals away from adjacent digital inputs. The power, ground, clock, and decoupling pins must be connected according to the manufacturer device user guide. Firmware should also include startup, reset, clock, watchdog, and fault-handling routines suitable for safety-relevant automotive equipment.

This product page organizes the key electrical, timing, memory, peripheral, packaging, and application information for the MC9S12DJ64CPV. It also identifies directly relevant HCS12 D-family alternatives, clarifies replacement boundaries, and provides practical selection guidance for engineers working on automotive multiplexing and embedded vehicle-control systems.

Mga alternatibo na pwedeng ilagay na MC9S12DJ64CPV — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

Variante sa Seri na ito

Katulad na modelo sa serye na katugma sa pagpasok MC9S12DJ64CPV (parehas na form factor at footprint) — pagkakaiba sa Architecture, Connectivity, EEPROM Size, Package, Peripherals.

NXP Semiconductors
Architecture: CISC
Connectivity: CANbus, I2C, SCI, SPI
EEPROM Size: 1 KB (1K x 8)
Ikabit sa MC9S12DJ64CPV →
NXP Semiconductors
Architecture: CISC
Connectivity: CANbus (x2), I2C, SCI, SPI
EEPROM Size: 1 KB
Ikabit sa MC9S12DJ64CPV →

MC9S12DJ64CPVE

✅ Drop-In
NXP Semiconductors
📦 112-lead LQFP (20 mm x 20 mm)
HCS12 · 16-Bit · CISC · 64 KB (64K x 8) Flash · 4 KB · 1 KB · 25 MHz · 50 MHz (CPU bus)

Magkontak para sa presyo

Tingnan ang Datasheet →

MC9S12D64CPVE

✅ Drop-In
NXP Semiconductors
📦 112-lead LQFP (20 mm x 20 mm)
HCS12 · 16-Bit · CISC · 25 MHz · 64 KB (64K x 8) Flash · 4 KB (4K x 8) · 1 KB (1K x 8) · 91

Magkontak para sa presyo

Tingnan ang Datasheet →

MC9S12DJ64CFUE

✅ Drop-In
📦 112-lead LQFP (20 mm x 20 mm)
Same MC9S12D 16-bit MCU family and peripheral architecture; package suffix and temperature qualification differ while core frequency and ADC resolution remain equivalent

📋 Alternatibo na Reference (hindi sa katalogo)

MC9S12DJ64CPV Mga Pinakamataas na Rating at Electrical Characteristics

Product Type 16-bit HCS12 flash microcontroller
Maximum CPU Frequency 25 MHz
Program Memory 64 KB Flash
Program Memory Organization 64K x 8 bits
Architecture HCS12 16-bit
Serial Communications Interfaces 2 asynchronous serial communications interfaces
Analog-to-Digital Converters 2 x 8-channel, 10-bit ADC
Pulse-Width Modulator Channels 8 channels
Discrete Digital I/O Lines 20 lines
Enhanced Capture Timer 8-channel enhanced capture timer
Package Type 112-lead LQFP
Package Dimensions 20 mm x 20 mm
Uri ng Pagpapasok Surface mount
Terminal Form Gull wing
Temperature Grade Industrial
Inter-IC Bus Inter-IC Bus System resource mapping
Clock Generation On-chip clock generation
Interrupt Control On-chip interrupt control

Gabay sa Pin Configuration ng MC9S12DJ64CPV 20 mm x 20 mm

Pin configuration para sa MC9S12DJ64CPV (20 mm x 20 mm package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.

Pinout diagram ng 20 mm x 20 mm package para sa MC9S12DJ64CPV

Wala ng detalyadong pinout data na magagamit para sa MC9S12DJ64CPV.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

MC9S12DJ64CPV ay nararapat para sa 6 aplikasyons: Automotive Multiplexing Gateway, Vehicle Sensor Aggregation Unit, Actuator and Motor Control Module, Body Control Module, Industrial Communications Controller, Automotive Diagnostic Interface.

🚗

Automotive Multiplexing Gateway

The MC9S12DJ64CPV fits an automotive multiplexing gateway because its 25 MHz HCS12 core provides deterministic control while the 64 KB Flash memory holds gateway and communication software. Two asynchronous serial communications interfaces allow connection to vehicle nodes, while 20 digital I/O lines handle discrete signals and the two 8-channel 10-bit ADC modules support diagnostic or sensor inputs. The 112-lead LQFP package also provides the pin count required for distributed I/O and power-management connections. Firmware must preserve timing margins and fault isolation between communication domains.

🧩

Vehicle Sensor Aggregation Unit

The MC9S12DJ64CPV can aggregate inputs from multiple vehicle sensors through two 8-channel 10-bit ADC modules while its 20 digital I/O lines monitor discrete sensors and switches. The 16-bit architecture is appropriate for filtering and scaling measurements before data is forwarded over one of the two asynchronous serial interfaces. Its 64 KB Flash capacity supports application code, calibration constants, and communication routines. The design should assign analog and digital return paths carefully because automotive wiring can introduce ground offsets and transient interference.

🏭

Actuator and Motor Control Module

The MC9S12DJ64CPV suits actuator-control modules that require coordinated digital commands, serial device communication, and timed outputs. Its 8-channel PWM block can generate multiple timing-dependent control signals, while the enhanced capture timer supports input measurement and event timing. The 25 MHz 16-bit CPU supplies enough processing bandwidth for command interpretation, state monitoring, and fault detection within a 64 KB Flash budget. Firmware must include output disable paths and safe-state behavior for every actuator when reset or communication failure occurs.

🚗

Body Control Module

The MC9S12DJ64CPV can coordinate body-control functions that combine switch inputs, actuator outputs, serial communication, and diagnostic monitoring. Its 20 discrete digital I/O lines reduce the need for external logic when handling lamps, locks, or other vehicle signals, while two serial interfaces provide links to remote modules. The 64 KB Flash program memory accommodates state logic and communication protocols, and the 25 MHz clock supports responsive debouncing and event handling. Production designs should verify wake, reset, and brownout behavior against the complete electrical system.

🌐

Industrial Communications Controller

The MC9S12DJ64CPV works as an industrial communications controller when deterministic local control must coexist with serial device connectivity. Its two asynchronous serial communications interfaces can connect to sensors, converters, or remote I/O, while the 20 digital I/O lines support local alarms and interlocks. The 16-bit CPU and 25 MHz clock support protocol timing and local calculations, and the 64 KB Flash memory holds application and configuration code. Industrial deployments should add appropriate transient, isolation, and surge protection beyond the controller itself.

🔧

Automotive Diagnostic Interface

The MC9S12DJ64CPV is suitable for a vehicle diagnostic interface that must combine serial communication with discrete status lines and analog measurements. The two asynchronous serial interfaces can support diagnostic and external data channels, while the dual 8-channel 10-bit ADCs permit monitoring of supply or sensor voltages. A 16-bit processor provides straightforward data formatting and protocol handling within the device's 64 KB Flash limit. Diagnostic software should validate message integrity and implement timeout behavior so a failed node cannot block vehicle-level service functions.

Buod ng mga Inirekomendang Produkto

MC9S12DJ64CPVE NXP Semiconductors Ginagamit sa: Automotive Multiplexing Gateway, Vehicle Sensor Aggregation Unit, Body Control Module, Industrial Communications Controller MC9S12D64CPV Pin-compatible HCS12 D-family configuration Ginagamit sa: Automotive Multiplexing Gateway, Actuator and Motor Control Module, Body Control Module, Automotive Diagnostic Interface MC9S12DJ64CFUE Same HCS12D peripheral architecture Ginagamit sa: Vehicle Sensor Aggregation Unit, Actuator and Motor Control Module, Industrial Communications Controller, Automotive Diagnostic Interface
What is the MC9S12DJ64CPV?
The MC9S12DJ64CPV is a 16-bit HCS12 flash microcontroller rated at 25 MHz with 64 KB of program memory in a 112-lead LQFP package. According to the manufacturer device user guide, it integrates two asynchronous serial interfaces, two 8-channel 10-bit ADC modules, an 8-channel PWM block, and 20 digital I/O lines. The part is intended for automotive multiplexing and other embedded control systems requiring deterministic peripheral resources in a 20 mm by 20 mm surface-mount package.
What are the key specifications of MC9S12DJ64CPV that engineers should know?
The MC9S12DJ64CPV combines a 25 MHz 16-bit HCS12 core with 64 KB of Flash memory and extensive automotive-oriented peripherals. The manufacturer device user guide identifies two asynchronous serial communications interfaces, two 8-channel 10-bit ADC modules, an 8-channel enhanced capture timer, an 8-channel PWM block, and 20 discrete digital I/O lines. Its 112-lead LQFP package is 20 mm by 20 mm, making the device appropriate for multilayer automotive control boards where a large pin count is acceptable.
Where can I download the MC9S12DJ64CPV datasheet PDF?
The MC9S12DJ64CPV device documentation can be downloaded from the NXP user-guide document titled MC9S12DJ64 Device User Guide. The device family is documented as an HCS12 16-bit microcontroller with a 25 MHz clock, 64 KB Flash memory, and a 112-lead LQFP configuration. Use the manufacturer guide for the authoritative pin-description table, electrical limits, memory map, peripheral block details, and application information.
Where can I find the MC9S12DJ64CPV pinout?
The MC9S12DJ64CPV pin assignments are documented in the MC9S12DJ64 Device User Guide published for the HCS12 D-family. The device uses a 112-lead LQFP package with 20 digital I/O lines, analog input channels, serial interfaces, timer signals, clock signals, reset, power, and ground pins. Assign PCB nets directly from the manufacturer pin-description table rather than relying on generic LQFP numbering diagrams.
Is MC9S12DJ64CPV suitable for automotive multiplexing applications?
The MC9S12DJ64CPV is suitable for automotive multiplexing applications because the HCS12 D-family product proposal explicitly identifies that use case and describes its members as fully pin compatible for scalable designs. Its 25 MHz 16-bit core, 64 KB Flash memory, two serial interfaces, dual 8-channel 10-bit ADC modules, and 20 digital I/O lines support centralized coordination of vehicle networks and sensor or actuator nodes.
What can replace the MC9S12DJ64CPV?
The closest documented replacement is the MC9S12DJ64CPVE, which retains the MC9S12DJ64CPV device identity, 25 MHz operating frequency, 64 KB Flash memory, and 112-lead LQFP footprint while changing the temperature suffix. For a second source, NXP's product selector and cross-reference resources should be used to confirm pin, software, qualification, and lifecycle compatibility before changing the BOM.
Is MC9S12DJ64CPVE the same as MC9S12DJ64CPV?
The MC9S12DJ64CPVE is a closely related MC9S12DJ64 112-lead LQFP configuration and is the most direct documented drop-in alternative to the MC9S12DJ64CPV. Both provide the same 25 MHz HCS12 architecture and 64 KB Flash memory organization. The suffix difference should be checked against the required industrial or extended-temperature range, automotive qualification, and production availability before substitution.
When should I choose MC9S12DJ64CPV over MC9S12DJ64CPVE?
Choose the MC9S12DJ64CPV when the design requires the industrial-temperature CPV configuration and does not depend on the extended-temperature suffix used by MC9S12DJ64CPVE. Both devices use the same HCS12DJ64 function set, 25 MHz clock, 64 KB Flash memory, and 112-lead LQFP footprint. The choice should ultimately follow the temperature, qualification, lifecycle, and sourcing requirements assigned to the finished automotive equipment.
What is the difference between MC9S12DJ64CPV and MC9S12D64CPV?
The MC9S12DJ64CPV and MC9S12D64CPV belong to the same HCS12 D-family, but their suffixes identify different device configurations rather than identical orderable parts. The HCS12 D-family product proposal states that family members are fully pin compatible, which supports board-level reuse. Memory capacity, peripheral details, temperature grade, qualification, and software-device identification must be compared against the manufacturer documentation before treating the D64 device as a functional replacement.
What is the best NXP equivalent for MC9S12DJ64CPV?
The best documented NXP candidate is the MC9S12DJ64CPVE because it preserves the MC9S12DJ64 device family, 25 MHz operating frequency, 64 KB Flash configuration, and 112-lead LQFP package. This makes it preferable to a cross-manufacturer microcontroller that may require software, clock, peripheral, or qualification changes. Confirm the required temperature range and automotive qualification before releasing the substitution.
Where can I buy MC9S12DJ64CPV online?
Use the Request a Quote form on this page to request MC9S12DJ64CPV availability, current commercial terms, and a lead-time quotation. The part is listed with 25 MHz operation, 64 KB Flash memory, and a 112-lead LQFP package. Include the required quantity, date code, traceability requirements, and target delivery date when requesting the quotation.
What is the price of MC9S12DJ64CPV?
The current commercial price for MC9S12DJ64CPV should be requested through the Request a Quote form on this page. A quotation can reflect quantity, date code, packaging, traceability, and delivery requirements. The exact manufacturer identity is NXP Semiconductors, and the orderable device is the industrial-temperature 112-lead LQFP configuration.
What is the lead time for MC9S12DJ64CPV?
The current lead time for MC9S12DJ64CPV should be confirmed through the Request a Quote form on this page. Provide the required quantity, production schedule, date-code preference, and traceability requirements. Because availability can change with procurement volume and inventory status, request the quotation directly rather than relying on a fixed lead-time statement.
Is MC9S12DJ64CPV in stock?
MC9S12DJ64CPV inventory should be checked through the Request a Quote form on this page. Include the quantity required, acceptable date codes, and whether package reels or another delivery format are needed. The part is a 25 MHz, 64 KB Flash HCS12 microcontroller in a 112-lead LQFP package, and current stock status should be confirmed for the exact MPN.
How is the MC9S12DJ64CPV programmed and interfaced?
The MC9S12DJ64CPV is programmed through its embedded 64 KB Flash program memory using the programming and debugging interface defined in the manufacturer device user guide. Its on-chip resources include two asynchronous serial communications interfaces, two 8-channel 10-bit ADC modules, an 8-channel PWM block, an enhanced capture timer, and 20 digital I/O lines. Use the documented programming header, clock configuration, and debug interface when designing access and production tooling.

Impormasyon ng Talumpati sa Engineering for MC9S12DJ64CPV — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose the MC9S12DJ64CPV for an automotive multiplexing or embedded-control design requiring a 25 MHz 16-bit HCS12 core, 64 KB Flash memory, two serial communications interfaces, dual 8-channel 10-bit ADCs, and a 112-lead LQFP footprint. Select MC9S12DJ64CPVE when its temperature and qualification suffix better matches the finished product; it retains the closest matching clock, memory, and package configuration. Consider MC9S12D64CPV only after verifying its memory map, peripherals, device identifier, and software constraints. MC9S12DJ64CFUE is appropriate when the related package suffix and qualification requirements fit the design. No cross-manufacturer MCU is presented as a drop-in replacement because differing CPU cores, interrupt systems, memory maps, peripherals, debug tools, and software ecosystems make a true pin-to-pin substitution unlikely without extensive redesign.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto MC9S12DJ64CPVE MC9S12D64CPV MC9S12DJ64CFUE
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors
Package 112-lead LQFP (20 mm x 20 mm) 112-lead LQFP (20 mm x 20 mm) 112-lead LQFP (20 mm x 20 mm) 112-lead LQFP (20 mm x 20 mm)
CPU Architecture 16-bit HCS12 16-bit HCS12 16-bit HCS12 D-family 16-bit HCS12
Maximum CPU Frequency 25 MHz 25 MHz 25 MHz 25 MHz

Pangunahing mga Pagkakaiba

  • Closest documented package alternative retains the complete core specification (kumpara saMC9S12DJ64CPVE)
  • Directly retains the industrial CPV configuration (kumpara saMC9S12D64CPV)
  • Documented HCS12D architecture supports scalable automotive designs (kumpara saMC9S12DJ64CFUE)

Talaan ng Disenyo

Implement the 112-lead LQFP footprint exactly as defined by the manufacturer package drawing and route every power and ground connection directly to the corresponding pins. The 20 mm by 20 mm package provides enough land area for short escape routes, but analog inputs, serial communication lines, and timer signals still require deliberate placement. Decoupling capacitors should connect directly to the relevant supply and ground pins rather than through shared narrow traces.

Separate analog inputs from PWM, serial, and clock routing wherever the board geometry permits. The two 8-channel 10-bit ADC modules can be sensitive to ground offsets and switching-node coupling, particularly in vehicle systems sharing a harness with actuators. Use a stable analog ground region, minimize return-path discontinuities, and place input filtering close to the source. Firmware should also disable unused analog channels and digital inputs to reduce unnecessary switching activity.

Do not treat any HCS12 D-family pin-compatible member as a software-identical replacement without checking the device identifier, memory map, interrupt vectors, peripheral implementation, and package suffix. The MC9S12DJ64CPV is a 25 MHz device with 64 KB Flash, two serial interfaces, and dual 8-channel 10-bit ADCs. After changing the orderable suffix, rerun startup, clock, timer, ADC, communications, reset, and watchdog tests against the replacement device.

Follow the manufacturer recommendations for supply sequencing, reset release, and decoupling because incorrect power-up ordering can leave the HCS12 core or peripherals in an indeterminate state. Provide local bulk and high-frequency capacitance near the device and keep sensitive return paths short. In an automotive module, include the external protection and regulation required for load dump, reverse battery, and transient conditions; those requirements are not fulfilled solely by the microcontroller package.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

The MC9S12DJ64CPV is identified as an industrial-temperature automotive HCS12 device, but its specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations are not stated in the cited product pages. Verify the current manufacturer declarations before production release.

Data napatotohanan sa: 2026-11-15 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

MC9S12DJ64CPV datasheet MC9S12DJ64CPV pinout MC9S12DJ64CPV datasheet pdf NXP MC9S12DJ64CPV MC9S12DJ64CPV equivalent MC9S12DJ64CPV replacement MC9S12DJ64CPV cross reference MC9S12DJ64CPV vs MC9S12DJ64CPVE MC9S12DJ64CPV 25MHz 64KB flash MC9S12DJ64CPV 112 LQFP MC9S12DJ64CPV automotive multiplexing MC9S12DJ64CPV price MC9S12DJ64CPV stock MC9S12DJ64CPV programming MC9S12DJ64CPV schematic

Mga kaugnay na Mga Komponente at mga Tuntunin

NXP Semiconductors MC9S12DJ64CPV MC9S12DJ64CPVE MC9S12D64CPV MC9S12DJ64CFUE HCS12 HCS12 D-family 16-bit microcontroller embedded microcontroller embedded processor semiconductor automotive multiplexing 25 MHz CPU clock 64 KB Flash memory asynchronous serial communications interface 10-bit analog-to-digital converter pulse-width modulation enhanced capture timer digital I/O Inter-IC Bus 112-lead LQFP surface-mount package automotive body control embedded control system industrial temperature grade
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ