Microchip Technology

MCP3302-CI/ST - 13-Bit Differential ADC | Microchip

MPN: MCP3302-CI/ST ✓ Aktif
14-pin TSSOP Package
MOQ: 1 |

MCP3302-CI/ST Ringkasan

The Microchip Technology MCP3302-CI/ST is a 13-bit, two-channel differential-input analog-to-digital converter with an SPI serial interface, 100 ksps conversion capability, and a 14-pin TSSOP package. It combines a compact surface-mount format with low-power operation for battery-powered systems, remote data acquisition, and precision analog measurement designs.

An analog-to-digital converter, or ADC, converts continuously varying analog voltages into numeric values that a microcontroller, digital signal processor, or data-acquisition system can process. The MCP3302 belongs to the SAR ADC family, where successive approximation rapidly determines the digital code associated with an input voltage. Its two differential input channels can measure the voltage difference between paired sensor or signal nodes, which helps reject common-mode noise when the two inputs share a similar reference potential.

The MCP3302-CI/ST provides a 13-bit conversion resolution and a 100 ksps maximum sampling capability. Its two-channel architecture makes it suitable for redundant sensing, bridge excitation, current measurement, and dual-channel instrumentation. The SPI interface supports straightforward connection to embedded controllers, while the differential-input structure is useful when signal integrity and common-mode rejection are more important than maximum channel count.

Microchip identifies the device as a low-power ADC intended for battery-powered and remote acquisition equipment. Low-power operation is valuable in these systems because the energy consumed during repeated conversions can dominate the operating budget. Designers should still evaluate the complete acquisition path, including the input amplifier, reference source, sampling network, controller activity, and idle intervals, rather than considering converter consumption alone.

Typical applications include industrial sensor acquisition, battery-powered environmental monitors, portable measurement instruments, current sensing, and low-speed closed-loop control. Differential input operation is particularly useful when a sensor produces a small signal riding on a larger common-mode voltage. The design must still ensure that every applied input remains within the ADC's absolute maximum and analog operating limits.

Layout and signal-conditioning decisions are central to achieving useful resolution. Place input and reference decoupling close to their pins, use a quiet reference source, and route high-impedance input traces away from digital and switching nodes. The input source impedance should be considered during acquisition timing, and the 14-pin TSSOP footprint requires careful fanout and assembly planning.

This page organizes the available manufacturer and distributor information around the MCP3302-CI/ST's key design facts. It also identifies where a replacement search is needed, since the cross-reference results do not establish any additional pin-compatible ADC without independent verification of its pinout and electrical behavior.

Pilihan pengganti yang segera untuk MCP3302-CI/ST — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

MCP3302-AI/ST

✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 14-TSSOP
Automotive-grade suffix with the same 13-bit resolution, 100 ksps conversion rate, and 14-TSSOP footprint; qualification and temperature details must be verified.

📋 Alternatif rujukan (tidak dalam katalog)

MCP3302-I/ST

✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 14-TSSOP
Industrial-grade suffix with the same 13-bit resolution, 100 ksps conversion rate, and 14-TSSOP footprint; grade-specific limits must be verified.

📋 Alternatif rujukan (tidak dalam katalog)

MCP3302-CI/ST Penilaian maksimum & Ciri-ciri Elektrik

ADC Type Successive approximation ADC
Pemecahkatan 13 bit
Number of Input Channels 2 channels
Input Configuration 2 fully differential input channels
kadar sampling 100 ksps
Serial Interface SPI
Kemasan 14-pin TSSOP
Package Type Tube
Automotive Qualification AEC-Q100
Power Consumption Low power

Panduan Konfigurasi Pin MCP3302-CI/ST tube

Konfigurasi pin untuk MCP3302-CI/ST (tube pakai). Komponen analog ini mempunyai pin masukan, keluaran, dan kuasa. Rujuk dokumen pengeluar untuk konfigurasi pengecualian, pemulihan, dan pin aktifkan. Ideal untuk pengawasan isyarat dan litar pengukur.

Garis bentuk pengecah pakai tube untuk MCP3302-CI/ST

Tiada data garisan pin yang diperoleh untuk MCP3302-CI/ST.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

MCP3302-CI/ST patut untuk 6 aplikasis: Industrial Sensor Acquisition, Battery-Powered Environmental Monitoring, Bridge Sensor Measurement, Portable Measurement Instruments, Current and Voltage Feedback Systems, Automotive Data Acquisition.

🏭

Industrial Sensor Acquisition

The MCP3302-CI/ST is appropriate for industrial measurement systems that need two differential analog channels rather than a larger multiplexer-based converter. Its 13-bit resolution and 100 ksps conversion capability provide useful measurement speed for pressure, strain, level, and process-sensing interfaces. The two fully differential inputs are particularly useful when a transducer or instrumentation stage produces a small signal around a larger common-mode voltage. Place suitable anti-alias and conditioning networks at the inputs, use a stable low-noise reference, and follow the datasheet's input-capacitance and acquisition-time requirements to preserve accuracy.

🧩

Battery-Powered Environmental Monitoring

The MCP3302-CI/ST suits remote environmental monitors where low-power conversion and compactness are central requirements. It can acquire two differential sensor channels at up to 100 ksps while communicating through SPI, allowing a low-power microcontroller to record temperature, humidity, gas, or light measurements without moving noisy analog signals onto digital traces. Duty-cycle the converter and synchronize reference or sensor settling before each sample. The overall battery budget should include the ADC's active current, sensor excitation, reference circuitry, pull networks, and the controller's sleep behavior.

📟

Bridge Sensor Measurement

The MCP3302-CI/ST is well matched to resistive bridge sensors because its fully differential inputs measure the bridge imbalance while reducing sensitivity to common-mode voltage. The 13-bit converter can represent the small differential output generated by mechanical or resistive changes, while the 100 ksps rate supports rapid measurements when required. Use the manufacturer's recommended excitation, input-filter, and reference arrangements. Confirm the bridge excitation voltage against the ADC's input and supply limits, and avoid routing the sensor output directly into the converter without appropriate filtering and settling time.

🔧

Portable Measurement Instruments

The MCP3302-CI/ST supports portable instruments that combine compact PCB area with precision analog measurement. Two differential inputs can monitor a primary channel and a reference, auxiliary, or diagnostic signal, while the SPI interface transfers conversion codes to a display processor, microcontroller, or logger. The 14-pin TSSOP package is practical for compact instrument construction but requires careful fanout and clean routing around the analog pins. Use a low-noise reference, local decoupling, guarded analog traces, and a controlled ground arrangement to maintain useful repeatability between measurements.

📈

Current and Voltage Feedback Systems

The MCP3302-CI/ST can digitize differential outputs from current and voltage feedback amplifiers in slow closed-loop monitoring and control systems. The differential inputs help retain accuracy when the measured signal is small and shares a substantial common-mode voltage with the amplifier output. The 100 ksps capability provides ample conversion bandwidth for many supervisory loops and data-logging functions. Confirm that feedback-amplifier output swing, converter input limits, and acquisition timing remain compatible, and apply digital filtering only after preserving the converter's required settling interval.

🚗

Automotive Data Acquisition

The MCP3302-CI/ST is identified as an AEC-Q100-qualified device for automotive data-acquisition applications where a compact, low-power differential ADC is appropriate. Its two channels can capture paired analog quantities from vehicle sensing and conditioning circuits, while SPI supports connection to an embedded controller. Automotive qualification does not remove the need for application-level checks: confirm operating temperature, electrical limits, reference behavior, transient immunity, and system fault requirements against the complete design. Use the manufacturer's CI/ST ordering information to verify the exact qualification and package configuration.

Ringkasan Produk Disebarkan

MCP3302 Same ADC family for differential industrial measurements Dipergunakan di: Industrial Sensor Acquisition, Battery-Powered Environmental Monitoring, Bridge Sensor Measurement, Portable Measurement Instruments, Current and Voltage Feedback Systems, Automotive Data Acquisition
What is the operating voltage of MCP3302-CI/ST?
The MCP3302-CI/ST operates from a supply voltage range that must be confirmed in the manufacturer's MCP3302 datasheet before design release. According to the Microchip product page, the device is a low-power 13-bit differential ADC with SPI communication, but the operating-range figure is not published on that page. Use the datasheet's absolute-maximum and recommended operating-condition tables to verify supply voltage, analog-input limits, and temperature constraints before connecting it to a prototype.
What are the key specifications of MCP3302-CI/ST that engineers should know?
The MCP3302-CI/ST is a 13-bit, two-channel, fully differential ADC with a maximum sampling rate of 100 ksps and an SPI serial interface. According to Microchip's MCP3302 product information, it is packaged in a 14-pin TSSOP and is intended for low-power, battery-powered, and remote data-acquisition systems. A distributor listing also identifies the CI/ST configuration as an automotive-qualified AEC-Q100 device supplied in a tube, making the package and qualification status important when planning production.
Where can I download the MCP3302-CI/ST datasheet PDF?
The MCP3302-CI/ST datasheet should be obtained from the official Microchip MCP3302 product page linked on this page. The product page provides access to the device documentation and is the authoritative starting point for the 13-bit differential ADC's electrical characteristics, pin descriptions, SPI timing, and recommended application circuit. Download the current revision from Microchip and confirm that its package, ordering code, and automotive qualification markings correspond to MCP3302-CI/ST.
Where can I find the MCP3302-CI/ST pinout?
The MCP3302-CI/ST pin assignment is identified in the manufacturer's pin-description table for the 14-pin TSSOP package. Use the official MCP3302 datasheet to map each numbered terminal to its analog input, reference, ground, supply, and SPI function, and follow the package drawing to identify pin 1. Do not infer the pinout solely from another MCP3302 package because suffix codes can identify different package or temperature options.
How many ADC channels and bits does MCP3302-CI/ST have?
The MCP3302-CI/ST has two fully differential input channels and delivers 13-bit conversion results. According to the Microchip product page, these differential channels support paired analog measurements, while the 13-bit resolution provides 8192 possible digital-code levels before applying calibration or system-level corrections. The exact input-voltage range and conversion characteristics should be read from the manufacturer's electrical-characteristics tables before calculating sensitivity.
What is the maximum sampling rate of MCP3302-CI/ST?
The MCP3302-CI/ST supports a maximum sampling rate of 100 ksps. Microchip describes the MCP3302 as a 13-bit ADC with full differential inputs, low power consumption, and an SPI serial interface. In a sampling system, this rate permits up to 100,000 complete conversions per second, subject to the acquisition timing, reference behavior, digital interface activity, and signal-source limitations described in the datasheet.
Is MCP3302-CI/ST suitable for battery-powered sensor acquisition?
Yes, the MCP3302-CI/ST is suitable for battery-powered sensor acquisition because Microchip identifies low power consumption as a core feature and specifically targets battery-powered systems. Its two differential channels can acquire paired sensor outputs while rejecting common-mode variation, and the 14-pin TSSOP supports compact instrumentation. Actual battery life depends on conversion frequency, reference circuitry, signal conditioning, and the time the system spends between samples.
MCP3302-CI/ST vs MCP3201: which ADC is better for a differential sensor?
The MCP3302-CI/ST is the stronger choice when the design specifically requires two fully differential inputs, 13-bit resolution, and a documented 100 ksps conversion rate. The MCP3201 is not established as a pin-compatible replacement by the cross-reference results, so it should not be substituted without comparing input topology, pin assignments, reference range, SPI timing, and package details. The MCP3302's differential architecture is better aligned with bridge sensors and small differential signals.
When should I choose MCP3302-CI/ST over a single-ended ADC?
Choose the MCP3302-CI/ST when the sensor produces a differential signal and common-mode rejection is important, such as with a bridge or instrumentation amplifier output. Its two fully differential channels also allow paired measurements that can support diagnostics or redundancy. A single-ended ADC may be simpler when every source is ground-referenced and the system does not require differential sensing, but the MCP3302 offers more measurement flexibility within the same compact package class.
What is the best drop-in replacement for MCP3302-CI/ST?
No verified drop-in replacement for the MCP3302-CI/ST is established by the available cross-reference results. A valid replacement must use the same 14-pin TSSOP footprint, preserve pin-to-pin signal assignments, provide compatible differential input and reference ranges, and satisfy the application's SPI timing, accuracy, power, and AEC-Q100 requirements. Request a cross-reference review for the specific incumbent part and verify the manufacturer datasheet before committing a substitute to production.
Can another 14-pin TSSOP ADC replace MCP3302-CI/ST?
A 14-pin TSSOP ADC cannot be assumed to replace the MCP3302-CI/ST solely because its package matches. The candidate must also preserve the analog-input topology, reference arrangement, supply pins, digital interface, and exposed or no-exposed-pad construction. Review the MCP3302 pin-description table against the candidate datasheet and confirm timing, accuracy, input range, and qualification requirements before treating it as a drop-in replacement.
What can replace MCP3302-CI/ST?
The available evidence does not identify a confirmed part that directly replaces the MCP3302-CI/ST without design review. Functional candidates may differ in channel count, differential-input capability, resolution, reference voltage, conversion rate, or SPI implementation. Use the manufacturer's cross-reference process and compare the exact 14-pin TSSOP pinout against a candidate datasheet. Until that comparison is complete, retain MCP3302-CI/ST as the qualified baseline.
Is MCP3302-CI/ST the same as the standard MCP3302?
The MCP3302-CI/ST is an orderable MCP3302 configuration with a CI/ST suffix, and the associated listing identifies a 14-pin TSSOP tube package and AEC-Q100 automotive qualification. The generic MCP3302 family supports low-power differential conversion with SPI, but ordering suffixes can also encode temperature grade, package, and qualification options. Confirm all suffix-specific characteristics in the manufacturer ordering information before treating it as interchangeable with another package variant.
How do I connect the MCP3302-CI/ST to a microcontroller?
Connect the MCP3302-CI/ST to a microcontroller through its SPI interface and use the manufacturer's pin-description table to connect supply, ground, analog inputs, and reference voltage. Place the reference and input bypass capacitors close to the relevant pins, and confirm the controller's SPI mode and clock rate against the ADC timing table. Because the pinout is not displayed on this page, use the official 14-pin TSSOP diagram for every physical connection.
Where can I buy MCP3302-CI/ST and check its lead time?
Use the Request a Quote form on this page to request MCP3302-CI/ST pricing, stock confirmation, lead time, and proposed order quantities. The part is identified as a 14-pin TSSOP tube-packaged, AEC-Q100-qualified device, but current commercial availability is not established by the product information. Quote requests allow the exact suffix, package form, and delivery quantity to be checked before the BOM is released.

Data referensi kejuruteraan untuk MCP3302-CI/ST — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose the MCP3302-CI/ST when the design needs a compact, low-power, two-channel ADC with fully differential inputs, 13-bit resolution, and SPI communication. It is particularly appropriate for bridge sensors, paired instrumentation signals, industrial acquisition, portable instruments, and automotive measurements where the CI/ST ordering configuration provides AEC-Q100 qualification. The part is also suitable for battery-powered systems when conversion activity can be duty-cycled to fit the energy budget.

Do not select it merely because a competitor uses a 14-pin TSSOP package. No confirmed drop-in alternatives were established, so any proposed replacement must be reviewed against the official pinout, analog ranges, reference arrangement, acquisition timing, SPI timing, error specifications, and qualification status. A functionally similar ADC with different pin assignments may require PCB changes. For final design release, obtain the current MCP3302 datasheet and verify all electrical limits, timing, and ordering-code details.

Perbandingan dengan Gantian

Parametr Produk Ini
ADC Resolution 13 bit
Input Channels 2 channels
Input Configuration Fully differential
Maximum Sampling Rate 100 ksps
Serial Interface SPI
Package 14-pin TSSOP
Brand Microchip Technology
Automotive Qualification AEC-Q100
Power Class Low power

Catatan Desain

Use the official 14-pin TSSOP drawing when assigning PCB lands and locating pin 1. Keep the analog inputs, reference connection, and their decoupling paths short, and place the bypass capacitors directly at the corresponding device pins. Sensitive input traces should remain away from SPI clock and data routes, switching-regulator nodes, inductors, and high-current return paths. For high-impedance sources, minimize parasitic capacitance and leakage because they can affect acquisition time and settled accuracy.

Treat the reference source as part of the measurement signal path because conversion accuracy depends on a stable reference. Use the manufacturer's recommended reference-bypass arrangement, provide a low-impedance return path, and keep the reference route away from noisy digital activity. Allow the analog source and reference network to settle before sampling, and follow the datasheet's acquisition-time and input-capacitance guidance rather than assuming that the nominal 100 ksps rate applies to every source impedance.

Estimate the complete conversion-path energy rather than considering only the ADC's operating current. The relevant inputs include the supply voltage, active current during conversion, conversion rate, reference current, analog-conditioning bias, and the controller's idle and SPI-processing consumption. In a battery-powered design, use duty-cycle control where the measurement rate permits it, disable unused channels if the device supports that behavior, and verify that repeated conversions do not create supply droop that shifts the reference or disturbs adjacent circuitry.

Do not substitute a generic 12-bit ADC solely because its resolution is close. The replacement review must cover differential-input topology, full-scale range, reference voltage, input impedance, acquisition timing, SPI mode, clock rate, pin assignments, and automotive qualification. In particular, verify whether the candidate permits the same common-mode voltage and whether its pinout changes the ground, reference, or serial-signal positions. Keep all substitutions within the documented MCP3302-CI/ST footprint and operating limits.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Qualified
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

The MCP3302-CI/ST distributor listing identifies the device as automotive AEC-Q100 qualified. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status were not explicitly established by the available product information.

Data disahkan pada: 2026-11-10 — data yang disahkan dan disusun semula oleh pasukan kejuruteraan komponen XAIPART

Pencarian Berhubungan

mcp3302 datasheet MCP3302-CI/ST datasheet MCP3302-CI/ST pinout MCP3302-CI/ST specifications MCP3302-CI/ST equivalent MCP3302-CI/ST replacement MCP3302-CI/ST cross reference MCP3302-CI/ST price MCP3302-CI/ST stock Microchip MCP3302-CI/ST MCP3302 13-bit differential ADC MCP3302 100 ksps ADC MCP3302 TSSOP application circuit MCP3302 differential sensor interface

Komponen dan Tanda berkaitan

Microchip Technology MCP3302-CI/ST MCP3302 microcontroller digital signal processor analog-to-digital converter ADC successive approximation ADC SAR ADC differential input 13-bit resolution 100 ksps SPI serial interface 14-pin TSSOP TSSOP package family surface-mount package SMD battery-powered systems remote data acquisition industrial sensor acquisition bridge sensor reference voltage input impedance AEC-Q100 RoHS REACH
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ