MCP3302-CI/ST - 13-Bit Differential ADC | Microchip
MPN: MCP3302-CI/ST ✓ AktifMCP3302-CI/ST Genel Bakış
An analog-to-digital converter, or ADC, converts continuously varying analog voltages into numeric values that a microcontroller, digital signal processor, or data-acquisition system can process. The MCP3302 belongs to the SAR ADC family, where successive approximation rapidly determines the digital code associated with an input voltage. Its two differential input channels can measure the voltage difference between paired sensor or signal nodes, which helps reject common-mode noise when the two inputs share a similar reference potential.
The MCP3302-CI/ST provides a 13-bit conversion resolution and a 100 ksps maximum sampling capability. Its two-channel architecture makes it suitable for redundant sensing, bridge excitation, current measurement, and dual-channel instrumentation. The SPI interface supports straightforward connection to embedded controllers, while the differential-input structure is useful when signal integrity and common-mode rejection are more important than maximum channel count.
Microchip identifies the device as a low-power ADC intended for battery-powered and remote acquisition equipment. Low-power operation is valuable in these systems because the energy consumed during repeated conversions can dominate the operating budget. Designers should still evaluate the complete acquisition path, including the input amplifier, reference source, sampling network, controller activity, and idle intervals, rather than considering converter consumption alone.
Typical applications include industrial sensor acquisition, battery-powered environmental monitors, portable measurement instruments, current sensing, and low-speed closed-loop control. Differential input operation is particularly useful when a sensor produces a small signal riding on a larger common-mode voltage. The design must still ensure that every applied input remains within the ADC's absolute maximum and analog operating limits.
Layout and signal-conditioning decisions are central to achieving useful resolution. Place input and reference decoupling close to their pins, use a quiet reference source, and route high-impedance input traces away from digital and switching nodes. The input source impedance should be considered during acquisition timing, and the 14-pin TSSOP footprint requires careful fanout and assembly planning.
This page organizes the available manufacturer and distributor information around the MCP3302-CI/ST's key design facts. It also identifies where a replacement search is needed, since the cross-reference results do not establish any additional pin-compatible ADC without independent verification of its pinout and electrical behavior.
Drop-in alternatifler için MCP3302-CI/ST — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
MCP3302-AI/ST
✅ Yerleştirme ⚠️ Onaylanmamış Özellikler📋 Katalogda Olmayan Referans Alternatifi
MCP3302-I/ST
✅ Yerleştirme ⚠️ Onaylanmamış Özellikler📋 Katalogda Olmayan Referans Alternatifi
MCP3302-CI/ST Maksimum Değerlendirmeler & Elektriksel Özellikler
| ADC Type | Successive approximation ADC |
| Çözünürlük | 13 bit |
| Number of Input Channels | 2 channels |
| Input Configuration | 2 fully differential input channels |
| Ölçekleme Oranı | 100 ksps |
| Serial Interface | SPI |
| Paket | 14-pin TSSOP |
| Package Type | Tube |
| Automotive Qualification | AEC-Q100 |
| Power Consumption | Low power |
MCP3302-CI/ST tube Pin Yapısı Kılavuzu
MCP3302-CI/ST (tube paket) için pin yapısı. Bu analog bileşen, giriş, çıkış ve güç besleme pinleri içerir. Ofset null, telafi ve etkinleştirme pin yapılandırmaları için üretici veri kitapçığını referans alın. Sinyal işleme ve güç amplifikasyon devreleri için mükemmel bir bileşendir.
Ayrıntılı pin çıkış verisi mevcut değil: MCP3302-CI/ST.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
MCP3302-CI/ST için uygundur 6 uygulamas: Industrial Sensor Acquisition, Battery-Powered Environmental Monitoring, Bridge Sensor Measurement, Portable Measurement Instruments, Current and Voltage Feedback Systems, Automotive Data Acquisition.
Industrial Sensor Acquisition
The MCP3302-CI/ST is appropriate for industrial measurement systems that need two differential analog channels rather than a larger multiplexer-based converter. Its 13-bit resolution and 100 ksps conversion capability provide useful measurement speed for pressure, strain, level, and process-sensing interfaces. The two fully differential inputs are particularly useful when a transducer or instrumentation stage produces a small signal around a larger common-mode voltage. Place suitable anti-alias and conditioning networks at the inputs, use a stable low-noise reference, and follow the datasheet's input-capacitance and acquisition-time requirements to preserve accuracy.
Önerilen
Battery-Powered Environmental Monitoring
The MCP3302-CI/ST suits remote environmental monitors where low-power conversion and compactness are central requirements. It can acquire two differential sensor channels at up to 100 ksps while communicating through SPI, allowing a low-power microcontroller to record temperature, humidity, gas, or light measurements without moving noisy analog signals onto digital traces. Duty-cycle the converter and synchronize reference or sensor settling before each sample. The overall battery budget should include the ADC's active current, sensor excitation, reference circuitry, pull networks, and the controller's sleep behavior.
Önerilen
Bridge Sensor Measurement
The MCP3302-CI/ST is well matched to resistive bridge sensors because its fully differential inputs measure the bridge imbalance while reducing sensitivity to common-mode voltage. The 13-bit converter can represent the small differential output generated by mechanical or resistive changes, while the 100 ksps rate supports rapid measurements when required. Use the manufacturer's recommended excitation, input-filter, and reference arrangements. Confirm the bridge excitation voltage against the ADC's input and supply limits, and avoid routing the sensor output directly into the converter without appropriate filtering and settling time.
Önerilen
Portable Measurement Instruments
The MCP3302-CI/ST supports portable instruments that combine compact PCB area with precision analog measurement. Two differential inputs can monitor a primary channel and a reference, auxiliary, or diagnostic signal, while the SPI interface transfers conversion codes to a display processor, microcontroller, or logger. The 14-pin TSSOP package is practical for compact instrument construction but requires careful fanout and clean routing around the analog pins. Use a low-noise reference, local decoupling, guarded analog traces, and a controlled ground arrangement to maintain useful repeatability between measurements.
Önerilen
Current and Voltage Feedback Systems
The MCP3302-CI/ST can digitize differential outputs from current and voltage feedback amplifiers in slow closed-loop monitoring and control systems. The differential inputs help retain accuracy when the measured signal is small and shares a substantial common-mode voltage with the amplifier output. The 100 ksps capability provides ample conversion bandwidth for many supervisory loops and data-logging functions. Confirm that feedback-amplifier output swing, converter input limits, and acquisition timing remain compatible, and apply digital filtering only after preserving the converter's required settling interval.
Önerilen
Automotive Data Acquisition
The MCP3302-CI/ST is identified as an AEC-Q100-qualified device for automotive data-acquisition applications where a compact, low-power differential ADC is appropriate. Its two channels can capture paired analog quantities from vehicle sensing and conditioning circuits, while SPI supports connection to an embedded controller. Automotive qualification does not remove the need for application-level checks: confirm operating temperature, electrical limits, reference behavior, transient immunity, and system fault requirements against the complete design. Use the manufacturer's CI/ST ordering information to verify the exact qualification and package configuration.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: MCP3302-CI/ST — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Do not select it merely because a competitor uses a 14-pin TSSOP package. No confirmed drop-in alternatives were established, so any proposed replacement must be reviewed against the official pinout, analog ranges, reference arrangement, acquisition timing, SPI timing, error specifications, and qualification status. A functionally similar ADC with different pin assignments may require PCB changes. For final design release, obtain the current MCP3302 datasheet and verify all electrical limits, timing, and ordering-code details.
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün |
|---|---|
| ADC Resolution | 13 bit |
| Input Channels | 2 channels |
| Input Configuration | Fully differential |
| Maximum Sampling Rate | 100 ksps |
| Serial Interface | SPI |
| Package | 14-pin TSSOP |
| Brand | Microchip Technology |
| Automotive Qualification | AEC-Q100 |
| Power Class | Low power |
Tasarım Notları
Use the official 14-pin TSSOP drawing when assigning PCB lands and locating pin 1. Keep the analog inputs, reference connection, and their decoupling paths short, and place the bypass capacitors directly at the corresponding device pins. Sensitive input traces should remain away from SPI clock and data routes, switching-regulator nodes, inductors, and high-current return paths. For high-impedance sources, minimize parasitic capacitance and leakage because they can affect acquisition time and settled accuracy.
Treat the reference source as part of the measurement signal path because conversion accuracy depends on a stable reference. Use the manufacturer's recommended reference-bypass arrangement, provide a low-impedance return path, and keep the reference route away from noisy digital activity. Allow the analog source and reference network to settle before sampling, and follow the datasheet's acquisition-time and input-capacitance guidance rather than assuming that the nominal 100 ksps rate applies to every source impedance.
Estimate the complete conversion-path energy rather than considering only the ADC's operating current. The relevant inputs include the supply voltage, active current during conversion, conversion rate, reference current, analog-conditioning bias, and the controller's idle and SPI-processing consumption. In a battery-powered design, use duty-cycle control where the measurement rate permits it, disable unused channels if the device supports that behavior, and verify that repeated conversions do not create supply droop that shifts the reference or disturbs adjacent circuitry.
Do not substitute a generic 12-bit ADC solely because its resolution is close. The replacement review must cover differential-input topology, full-scale range, reference voltage, input impedance, acquisition timing, SPI mode, clock rate, pin assignments, and automotive qualification. In particular, verify whether the candidate permits the same common-mode voltage and whether its pinout changes the ground, reference, or serial-signal positions. Keep all substitutions within the documented MCP3302-CI/ST footprint and operating limits.
Uyumluluk Bilgisi
The MCP3302-CI/ST distributor listing identifies the device as automotive AEC-Q100 qualified. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status were not explicitly established by the available product information.