MCP3422A1-E/SN - 18-Bit Dual-Channel Delta-Sigma ADC | Microchip
MPN: MCP3422A1-E/SN ✓ AktifMCP3422A1-E/SN Ringkasan
A delta-sigma ADC is an analog-to-digital converter category that uses oversampling and digital filtering to achieve high resolution and noise performance. The MCP3422 belongs to the broader hierarchy of data-converter ICs, analog-to-digital converters, and signal-chain semiconductors. Its two differential channels can reject common-mode noise when paired with suitable front-end circuitry, while the digital interface allows a microcontroller or embedded system to retrieve conversion results over I2C.
The MCP3422 family provides up to 18 bits of resolution and includes a 2.048 V on-board reference. The A1-E/SN ordering configuration is identified by distributors as an 18-bit, dual-input, delta-sigma ADC in an 8-SOIC package. The operating temperature range extends from -40°C to +125°C, making the device suitable for industrial and automotive-oriented measurement systems when the individual qualification and regulatory requirements are satisfied for the assembled design.
The MCP3422A1-E/SN converts at 3.75 samples per second, prioritizing conversion resolution and noise performance rather than high-speed waveform acquisition. Its differential inputs and integrated reference simplify instrumentation designs by reducing the need for an external low-noise reference and input-conditioning network. Applications include bridge excitation, pressure and force sensing, current measurement, battery monitoring, temperature measurement, and low-level industrial signal acquisition.
For PCB implementation, use an 8-pin SOIC land pattern and follow the manufacturer pin-description table when assigning power, ground, analog inputs, and I2C signals. Keep analog input routing compact and place input filtering close to the converter. Provide stable supply decoupling and use pull-up resistors on the I2C bus in accordance with the interface voltage and bus capacitance.
The principal design trade-off is conversion speed versus resolution. The MCP3422A1-E/SN is appropriate for slowly changing sensor signals where 18-bit precision is more valuable than rapid sampling. For waveforms requiring substantially faster acquisition, select a converter whose conversion rate and signal bandwidth match the measured phenomenon rather than treating resolution alone as the system requirement.
This page combines manufacturer specifications, exact-ordering-code sourcing information, drop-in family alternatives, comparison parameters, and practical layout guidance. It also identifies the operating distinctions that matter when choosing a pin-compatible member of the MCP3422 family for precision sensor and industrial measurement designs.
Pilihan pengganti yang segera untuk MCP3422A1-E/SN — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera MCP3422A1-E/SN (sama faktor bentuk dan kaki) — berbeza dalam Conversion Rate, Operating Temperature Range, Differential Input Range, Input Architecture, Resolution.
MCP3422A2-E/SN
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
MCP3422A4-E/SN
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →MCP3422A5-E/SN
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →MCP3422A0T-E/SN
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
MCP3422A1-E/SN Penilaian maksimum & Ciri-ciri Elektrik
| Converter Type | Delta-sigma ADC |
| Pemecahkatan | Up to 18 bits |
| Input Channels | 2 channels |
| Input Configuration | Differential |
| Internal Reference Voltage | 2.048 V |
| Internal Differential Input Range | -2.048 V to +2.048 V |
| Conversion Rate | 3.75 samples/s |
| Tegangan Pemberi Arus | 3.3 V or 5 V |
| Digital Interface | I2C |
| Gambaran Suhu Operasi | -40°C to +125°C |
| Kemasan | 8-pin SOIC |
| Jenis Pemasangan | Surface mount |
| Channel Count | 2 analog input channels |
| Automotive Classification | Automotive |
| Integrated Voltage Reference | Yes, 2.048 V |
| Converter Noise Class | Low-noise |
| Input Accuracy Class | High accuracy |
Panduan Konfigurasi Pin MCP3422A1-E/SN 8-pin soic
Konfigurasi pin untuk MCP3422A1-E/SN (8-pin soic pakai). Komponen analog ini mempunyai pin masukan, keluaran, dan kuasa. Rujuk dokumen pengeluar untuk konfigurasi pengecualian, pemulihan, dan pin aktifkan. Ideal untuk pengawasan isyarat dan litar pengukur.
Tiada data garisan pin yang diperoleh untuk MCP3422A1-E/SN.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
MCP3422A1-E/SN patut untuk 6 aplikasis: Load-Cell and Force Measurement, Battery and Power-System Monitoring, Precision Temperature Sensing, Current-Shunt Instrumentation, Industrial Process Measurement, Portable Sensor Acquisition.
Load-Cell and Force Measurement
The MCP3422A1-E/SN fits low-speed force, pressure, and load-cell instrumentation because its differential inputs reject common-mode excitation and sensing signals while providing up to 18-bit resolution. Two channels can monitor separate bridge outputs or support redundant sensing when wired according to the manufacturer input guidance. At 3.75 samples/s, the converter favors temperature, force, and pressure signals that settle slowly rather than transient waveforms. The integrated 2.048 V reference provides a defined differential input range of ±2.048 V, helping simplify instrumentation calibration and analog-front-end design.
Disebarkan
Battery and Power-System Monitoring
The MCP3422A1-E/SN is appropriate for battery management systems that must measure supply, return-path, or differential sensing voltages with limited bandwidth. Its 18-bit resolution and differential input architecture help preserve useful signal detail around a low-level threshold, while the integrated 2.048 V reference supports consistent measurement without requiring a separate reference in the acquisition path. The 3.75-sample/s conversion rate suits changing voltages, currents, and temperatures sampled periodically. The I2C interface also allows an embedded controller to retrieve filtered measurements without occupying parallel data-bus pins.
Disebarkan
Precision Temperature Sensing
The MCP3422A1-E/SN can digitize slow temperature-probe outputs in industrial equipment, HVAC controls, and thermal monitoring systems. Its low-noise, high-accuracy delta-sigma architecture is useful when small temperature-induced voltage changes require more precision than a general-purpose low-resolution ADC provides. Differential inputs are beneficial for bridge-based resistive probes or systems where the measured node is referenced close to the sensor return. The 3.75-sample/s rate is well matched to thermal time constants, and the 3.3 V or 5 V operation supports both low-voltage embedded systems and higher-level analog signal-chain designs.
Disebarkan
Current-Shunt Instrumentation
The MCP3422A1-E/SN is suitable for low-bandwidth current measurement using a precision shunt because the differential channels can receive the small voltage developed across the shunt without requiring separate single-ended amplifiers. Up to 18-bit resolution supports precise threshold and trend measurements, while the 2.048 V internal reference defines the differential measurement range when selected. Its 3.75-sample/s rate suits energy, battery, and supervisory measurements rather than fast motor-current waveforms. Place the converter close to the shunt and isolate its analog path from switching nodes to preserve the low-level differential signal.
Disebarkan
Industrial Process Measurement
The MCP3422A1-E/SN supports slow industrial process signals such as pressure, flow, level, and chemical-sensor outputs that require better resolution than a basic control ADC. Two differential inputs reduce sensitivity to ground-referenced disturbances when the sensor and electronics share a noisy environment. The 18-bit conversion capability and low-noise architecture improve measurement granularity, while 3.75 samples/s is appropriate for variables with seconds-scale or slower dynamics. The I2C interface simplifies connection to industrial embedded controllers, and the -40°C to +125°C specified range supports demanding equipment when all other assembly requirements are met.
Disebarkan
Portable Sensor Acquisition
The MCP3422A1-E/SN can serve as the precision acquisition section of a portable instrument, wearable accessory, or field-measurement module when energy use and small size are priorities. Its 3.3 V or 5 V supply options accommodate multiple embedded platforms, and the I2C interface reduces wiring to a host controller. The 18-bit resolution is useful for physiological, environmental, or resistive-sensor signals that occupy a relatively small voltage range. Its 3.75-sample/s conversion rate suits continuously changing sensor values without demanding continuous-rate sampling. Board layout should keep the analog input path short and place filtering near the converter.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk MCP3422A1-E/SN — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | MCP3422A2-E/SN | MCP3422A4-E/SN | MCP3422A5-E/SN | MCP3422A0T-E/SN |
|---|---|---|---|---|---|
| Package | 8-SOIC | 8-SOIC | 8-SOIC | 8-SOIC | 8-SOIC |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Converter Architecture | Delta-sigma ADC | Delta-sigma ADC | Delta-sigma ADC | Delta-sigma ADC | Delta-sigma ADC |
| Resolution | Up to 18 bits | Up to 18 bits | Up to 18 bits | Up to 18 bits | Up to 18 bits |
| Input Channels | 2 differential channels | 2 differential channels | 2 differential channels | 2 differential channels | 2 differential channels |
| Internal Reference | 2.048 V | 2.048 V | 2.048 V | 2.048 V | 2.048 V |
| Digital Interface | I2C | I2C | I2C | I2C | I2C |
| Ordering Configuration | A1 configuration | A2 configuration | A4 configuration | A5 configuration | A0 configuration with T ordering option |
Penyeberangsung Jelas
- High-resolution differential conversion in a compact interface (vsMCP3422A2-E/SN)
- Defined 3.75-sample/s precision conversion mode (vsMCP3422A4-E/SN)
- Internal reference supports differential measurement range (vsMCP3422A5-E/SN)
- Wide specified industrial temperature range (vsMCP3422A0T-E/SN)
Catatan Desain
Route the two differential inputs as a compact, matched pair and keep the analog front end close to the SOIC pins. Avoid sharing sensitive input traces with switching-node, relay-coil, or high-current return paths. Because the converter includes differential inputs and an internal 2.048 V reference, a short and symmetric layout reduces sensitivity to trace resistance, parasitic pickup, and ground differences. Use the manufacturer pin-description and layout examples when assigning the 8-pin footprint.
Place the required bypass capacitors immediately across the appropriate supply and ground pins, and keep the analog and digital return paths low-impedance. The converter accepts 3.3 V or 5 V operation, so do not allow supply transients or analog input excursions beyond the limits in the manufacturer electrical-characteristics table. A stable local supply rail is particularly important because reference noise and supply disturbance can directly influence an 18-bit conversion result.
Apply input filtering where the sensor impedance and required conversion bandwidth are known. The 3.75-sample/s conversion rate targets slow measurements, so aggressive anti-alias filtering is generally compatible with the intended signal class, but the exact filter must also satisfy the converter's input settling requirements. Check differential common-mode limits and the selected gain mode before scaling a bipolar or bridge-connected source; the ±2.048 V range is the internal-reference differential range rather than a universal input-voltage limit.
Do not select a substitute solely because it uses an 8-pin SOIC package. MCP3422 A-series configuration codes can change operating behavior, so verify the conversion mode, gain, acquisition timing, reference selection, and I2C command sequence in the family datasheet. Likewise, a two-channel package does not guarantee equivalent pin compatibility across unrelated ADC families. Preserve the exact pin mapping and validate acquisition results against the target circuit before releasing a drop-in substitution.
Maklumat Kesediaan
The exact-ordering-code information identifies an automotive-classified device, but an AEC-Q100 qualification statement and detailed RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not established. Verify these requirements for the exact production ordering code before regulatory submission.