Microchip Technology

MCP3422A1-E/SN - 18-Bit Dual-Channel Delta-Sigma ADC | Microchip

MPN: MCP3422A1-E/SN ✓ פעיל
2.048 V Vdss 8-pin SOIC Package
כמות הזמנה מינימלית: 1 |

MCP3422A1-E/SN סקירה

Microchip Technology MCP3422A1-E/SN is a two-channel, 18-bit delta-sigma analog-to-digital converter with differential inputs, an integrated 2.048 V precision reference, and an I2C interface. The converter operates at 3.3 V or 5 V and is packaged in an 8-pin SOIC. Its differential input range is ±2.048 V when the internal reference is used, while its low-noise architecture targets accurate measurement of low-level analog signals.

A delta-sigma ADC is an analog-to-digital converter category that uses oversampling and digital filtering to achieve high resolution and noise performance. The MCP3422 belongs to the broader hierarchy of data-converter ICs, analog-to-digital converters, and signal-chain semiconductors. Its two differential channels can reject common-mode noise when paired with suitable front-end circuitry, while the digital interface allows a microcontroller or embedded system to retrieve conversion results over I2C.

The MCP3422 family provides up to 18 bits of resolution and includes a 2.048 V on-board reference. The A1-E/SN ordering configuration is identified by distributors as an 18-bit, dual-input, delta-sigma ADC in an 8-SOIC package. The operating temperature range extends from -40°C to +125°C, making the device suitable for industrial and automotive-oriented measurement systems when the individual qualification and regulatory requirements are satisfied for the assembled design.

The MCP3422A1-E/SN converts at 3.75 samples per second, prioritizing conversion resolution and noise performance rather than high-speed waveform acquisition. Its differential inputs and integrated reference simplify instrumentation designs by reducing the need for an external low-noise reference and input-conditioning network. Applications include bridge excitation, pressure and force sensing, current measurement, battery monitoring, temperature measurement, and low-level industrial signal acquisition.

For PCB implementation, use an 8-pin SOIC land pattern and follow the manufacturer pin-description table when assigning power, ground, analog inputs, and I2C signals. Keep analog input routing compact and place input filtering close to the converter. Provide stable supply decoupling and use pull-up resistors on the I2C bus in accordance with the interface voltage and bus capacitance.

The principal design trade-off is conversion speed versus resolution. The MCP3422A1-E/SN is appropriate for slowly changing sensor signals where 18-bit precision is more valuable than rapid sampling. For waveforms requiring substantially faster acquisition, select a converter whose conversion rate and signal bandwidth match the measured phenomenon rather than treating resolution alone as the system requirement.

This page combines manufacturer specifications, exact-ordering-code sourcing information, drop-in family alternatives, comparison parameters, and practical layout guidance. It also identifies the operating distinctions that matter when choosing a pin-compatible member of the MCP3422 family for precision sensor and industrial measurement designs.

חלופות תחליף ישיר עבור MCP3422A1-E/SN — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

וריאנטים בסדרה זו

דגמים מאותה סדרה התואמים Drop-in עם MCP3422A1-E/SN (אותו גורם צורה וטביעת רגל) — שונים ב Conversion Rate, Operating Temperature Range, Differential Input Range, Input Architecture, Resolution.

Microchip Technology
Operating Temperature Range: -40 °C to +125 °C
Differential Input Range: ±2.048 V
Input Architecture: Differential input
Microchip Technology
Conversion Rate: 4 sps
Operating Temperature Range: -40 °C to +125 °C
Differential Input Range: +/-2.048 V

MCP3422A2-E/SN

✅ Drop-In
📦 8-SOIC
Same MCP3422 family and 8-SOIC footprint; A2 changes the family configuration-code option by one step relative to A1.

📋 חלופה להתייחסות (לא בקטלוג)

MCP3422A4-E/SN

✅ Drop-In
Microchip Technology
📦 8-SOIC
18 bit · 2 channels · Differential input · Delta-sigma · 3.75 samples/s · 2.048 V · ±2.048 V · 2.7 V to 5.5 V

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

MCP3422A5-E/SN

✅ Drop-In
Microchip Technology
📦 8-SOIC
Delta-sigma ADC · 18 bit · 2 channels · Differential inputs · 4 sps · 2.048 V · +/-2.048 V · 2.7 V to 5.5 V

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

MCP3422A0T-E/SN

✅ Drop-In
📦 8-SOIC
Same MCP3422 family and 8-SOIC footprint; A0 is a different configuration code and the T ordering option changes the manufacturing packing designation.

📋 חלופה להתייחסות (לא בקטלוג)

MCP3422A1-E/SN דירוגים מרביים ומאפיינים חשמליים

Converter Type Delta-sigma ADC
רזולוציה Up to 18 bits
Input Channels 2 channels
Input Configuration Differential
Internal Reference Voltage 2.048 V
Internal Differential Input Range -2.048 V to +2.048 V
Conversion Rate 3.75 samples/s
מתח אספקה 3.3 V or 5 V
Digital Interface I2C
טווח טמפרטורת פעולה -40°C to +125°C
מארז 8-pin SOIC
סוג הרכבה Surface mount
Channel Count 2 analog input channels
Automotive Classification Automotive
Integrated Voltage Reference Yes, 2.048 V
Converter Noise Class Low-noise
Input Accuracy Class High accuracy

מדריך תצורת פינים של MCP3422A1-E/SN 8-pin soic

תצורת פינים עבור MCP3422A1-E/SN (מארזת 8-pin soic). רכיב אנלוגי זה כולל פיני כניסה, יציאה ואספקת מתח. יש לעיין בגיליון הנתונים של היצרן לתצורות פיני איפוס היסט, פיצוי והפעלה. אידיאלי למעגלי עיצוב אותות ומגברים.

תרשים פינים של מארזת 8-pin soic עבור MCP3422A1-E/SN

אין נתוני פריסת פינים מפורטים עבור MCP3422A1-E/SN.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

MCP3422A1-E/SN מתאים עבור 6 יישוםs: Load-Cell and Force Measurement, Battery and Power-System Monitoring, Precision Temperature Sensing, Current-Shunt Instrumentation, Industrial Process Measurement, Portable Sensor Acquisition.

🏭

Load-Cell and Force Measurement

The MCP3422A1-E/SN fits low-speed force, pressure, and load-cell instrumentation because its differential inputs reject common-mode excitation and sensing signals while providing up to 18-bit resolution. Two channels can monitor separate bridge outputs or support redundant sensing when wired according to the manufacturer input guidance. At 3.75 samples/s, the converter favors temperature, force, and pressure signals that settle slowly rather than transient waveforms. The integrated 2.048 V reference provides a defined differential input range of ±2.048 V, helping simplify instrumentation calibration and analog-front-end design.

⚡

Battery and Power-System Monitoring

The MCP3422A1-E/SN is appropriate for battery management systems that must measure supply, return-path, or differential sensing voltages with limited bandwidth. Its 18-bit resolution and differential input architecture help preserve useful signal detail around a low-level threshold, while the integrated 2.048 V reference supports consistent measurement without requiring a separate reference in the acquisition path. The 3.75-sample/s conversion rate suits changing voltages, currents, and temperatures sampled periodically. The I2C interface also allows an embedded controller to retrieve filtered measurements without occupying parallel data-bus pins.

🌡️

Precision Temperature Sensing

The MCP3422A1-E/SN can digitize slow temperature-probe outputs in industrial equipment, HVAC controls, and thermal monitoring systems. Its low-noise, high-accuracy delta-sigma architecture is useful when small temperature-induced voltage changes require more precision than a general-purpose low-resolution ADC provides. Differential inputs are beneficial for bridge-based resistive probes or systems where the measured node is referenced close to the sensor return. The 3.75-sample/s rate is well matched to thermal time constants, and the 3.3 V or 5 V operation supports both low-voltage embedded systems and higher-level analog signal-chain designs.

⚡

Current-Shunt Instrumentation

The MCP3422A1-E/SN is suitable for low-bandwidth current measurement using a precision shunt because the differential channels can receive the small voltage developed across the shunt without requiring separate single-ended amplifiers. Up to 18-bit resolution supports precise threshold and trend measurements, while the 2.048 V internal reference defines the differential measurement range when selected. Its 3.75-sample/s rate suits energy, battery, and supervisory measurements rather than fast motor-current waveforms. Place the converter close to the shunt and isolate its analog path from switching nodes to preserve the low-level differential signal.

🏭

Industrial Process Measurement

The MCP3422A1-E/SN supports slow industrial process signals such as pressure, flow, level, and chemical-sensor outputs that require better resolution than a basic control ADC. Two differential inputs reduce sensitivity to ground-referenced disturbances when the sensor and electronics share a noisy environment. The 18-bit conversion capability and low-noise architecture improve measurement granularity, while 3.75 samples/s is appropriate for variables with seconds-scale or slower dynamics. The I2C interface simplifies connection to industrial embedded controllers, and the -40°C to +125°C specified range supports demanding equipment when all other assembly requirements are met.

📱

Portable Sensor Acquisition

The MCP3422A1-E/SN can serve as the precision acquisition section of a portable instrument, wearable accessory, or field-measurement module when energy use and small size are priorities. Its 3.3 V or 5 V supply options accommodate multiple embedded platforms, and the I2C interface reduces wiring to a host controller. The 18-bit resolution is useful for physiological, environmental, or resistive-sensor signals that occupy a relatively small voltage range. Its 3.75-sample/s conversion rate suits continuously changing sensor values without demanding continuous-rate sampling. Board layout should keep the analog input path short and place filtering near the converter.

סיכום מוצרים מומלצים

MCP3422 Manufacturer family containing the MCP3422A1-E/SN בשימוש ב-: Load-Cell and Force Measurement, Battery and Power-System Monitoring, Current-Shunt Instrumentation, Portable Sensor Acquisition MCP3422A2-E/SN Pin-compatible MCP3422 family configuration בשימוש ב-: Load-Cell and Force Measurement, Precision Temperature Sensing, Industrial Process Measurement MCP3422A4-E/SN Microchip Technology בשימוש ב-: Battery and Power-System Monitoring, Industrial Process Measurement MCP3422A5-E/SN Microchip Technology בשימוש ב-: Precision Temperature Sensing, Portable Sensor Acquisition MCP3422A0T-E/SN Same-package family ordering option בשימוש ב-: Current-Shunt Instrumentation
What are the key specifications of MCP3422A1-E/SN that engineers should know?
The MCP3422A1-E/SN is a two-channel, 18-bit delta-sigma ADC with differential inputs, an integrated 2.048 V reference, a 3.75-sample/s conversion rate, and an I2C interface. According to the Microchip Technology MCP3422/3/4 family datasheet, the internal reference supports a differential input range of ±2.048 V. The device operates from a 3.3 V or 5 V supply, is specified from -40°C to +125°C, and uses an 8-pin SOIC package.
Where can I download the MCP3422A1-E/SN datasheet PDF?
The official MCP3422A1-E/SN datasheet PDF is available from Microchip Technology through the manufacturer document link on this page. The PDF is titled for the MCP3422, MCP3423, and MCP3424 family and describes the low-noise, high-accuracy 18-bit delta-sigma converters, including the 2.048 V internal reference, differential inputs, electrical characteristics, pin descriptions, and application information. Use the manufacturer copy for design verification and the exact ordering code.
Where can I find the MCP3422A1-E/SN pinout?
The MCP3422A1-E/SN pinout is defined in the pin-description table of the official Microchip MCP3422/3/4 family datasheet. The component uses an 8-pin SOIC footprint and includes power, ground, two differential analog channels, and I2C interface functions. Consult that table before routing the PCB because exposed pad and NC assignments can vary among related family members; do not infer the target pinout solely from a family overview.
What is the MCP3422A1-E/SN input voltage range?
The MCP3422A1-E/SN supports a differential input range of ±2.048 V when operated from its integrated 2.048 V reference. The manufacturer describes the MCP3422 family as a two-channel, low-noise, high-accuracy delta-sigma ADC with differential inputs and up to 18-bit resolution. External-reference or gain configurations can alter the usable range, so verify the selected conversion configuration in the manufacturer datasheet before scaling an input signal.
How fast does the MCP3422A1-E/SN perform conversions?
The MCP3422A1-E/SN converts at 3.75 samples per second. This rate is appropriate for pressure, temperature, force, load-cell, and other slowly changing sensor signals where conversion latency is not the primary constraint. According to the family datasheet, the MCP3422 devices are optimized for low noise and high accuracy rather than high-speed waveform capture, so select a faster ADC when the application must track rapidly changing analog content.
What can replace MCP3422A1-E/SN?
The closest drop-in choices are pin-compatible members of the Microchip MCP3422 family with the same 8-pin SOIC footprint, including MCP3422A2-E/SN, MCP3422A4-E/SN, and MCP3422A5-E/SN. The exact substitution depends on the required conversion mode, gain configuration, timing, and interface behavior. A genuine replacement should preserve both the pin assignments and the electrical settings used by the original circuit.
Is MCP3422A1-E/SN the same as MCP3422A2-E/SN?
MCP3422A1-E/SN and MCP3422A2-E/SN share the MCP3422 family architecture and 8-pin SOIC package, but their A1 and A2 configuration codes identify different operating choices within the family. They are therefore not identical devices even though their shared package can support board-level substitution. Confirm the required gain, conversion-rate, and filtering settings in the family datasheet before treating A2 as a replacement for A1.
What is the best Microchip equivalent for MCP3422A1-E/SN?
The most direct Microchip equivalents are the 8-pin SOIC MCP3422A2-E/SN, MCP3422A4-E/SN, and MCP3422A5-E/SN because they remain within the same converter family and package. Cross-brand substitutes are not established here, so engineers should use Microchip's cross-reference search and verify pin compatibility, reference behavior, acquisition timing, and conversion configuration before approving a second-source part. This avoids treating a merely similar ADC as a true drop-in replacement.
When should I choose MCP3422A1-E/SN over MCP3422A2-E/SN?
Choose MCP3422A1-E/SN when its 3.75-sample/s conversion behavior and family configuration match the sensor, settling requirements, and digital acquisition sequence of the design. Choose another MCP3422 configuration only when its corresponding operating mode better satisfies timing, gain, or filtering requirements while preserving the same 8-pin SOIC connections. The package match alone is insufficient; verify the conversion-control requirements as well as the physical footprint.
Is MCP3422A1-E/SN suitable for low-level industrial sensor measurement?
The MCP3422A1-E/SN is suitable for many low-level industrial measurements because it combines up to 18-bit resolution, differential inputs, low-noise operation, a 2.048 V internal reference, and a -40°C to +125°C temperature range. Differential connection helps reject common-mode disturbance when paired with suitable instrumentation circuitry. The 3.75-sample/s rate favors slow sensor outputs rather than high-bandwidth signals, so confirm the signal bandwidth before selection.
How should I design the PCB layout for MCP3422A1-E/SN?
Place the MCP3422A1-E/SN close to the sensor and analog-conditioning components, and route differential inputs as a compact, symmetric pair with minimal switching-node interference. Use a quiet ground strategy for the analog return path and follow the manufacturer pin-description table for every connection. Add the recommended supply bypass capacitors close to the device pins, keep the I2C routing away from high-current paths, and use pull-ups selected for the actual bus voltage and capacitance.
Can MCP3422A1-E/SN measure bridge and current-sensor signals?
The MCP3422A1-E/SN can measure bridge and current-sensor outputs when their differential voltage lies within the selected input range and the signal bandwidth is compatible with the 3.75-sample/s conversion rate. Its two differential channels support paired sensing or measurement, while the integrated 2.048 V reference simplifies ratio-independent ratiometric designs. Use the manufacturer input-stage guidance to establish gain, common-mode limits, filtering, and excitation requirements.
Is MCP3422A1-E/SN still active for new designs?
The manufacturer continues to provide an MCP3422 family product page, technical datasheet, and ordering information for the MCP3422A1-E/SN, supporting an active lifecycle classification for this page. For a production release, verify the current lifecycle and availability markings in the manufacturer product page. The component is also listed by major distributors, but current stock and lead time should be confirmed through the Request a Quote form on this page.
Where can I buy MCP3422A1-E/SN online?
The MCP3422A1-E/SN can be requested through the Request a Quote form on this XAIPART page. The form is the appropriate route for checking exact-ordering-code availability, current lead time, and quantity requirements without relying on a static price. Confirm that the quote identifies MCP3422A1-E/SN, the 8-pin SOIC package, and the intended production quantity before placing the order.
What is the price of MCP3422A1-E/SN?
The current price for MCP3422A1-E/SN depends on order quantity, inventory, and the exact suffix configuration. Use the Request a Quote form on this page to request current pricing for the MCP3422A1-E/SN ordering code, including a quantity-break schedule if required. Submit the target annual and prototype quantities so the commercial response reflects the actual demand rather than a generic single-unit figure.
What is the lead time and stock status for MCP3422A1-E/SN?
Request the current MCP3422A1-E/SN lead time, stock status, and minimum order quantity through the Request a Quote form on this page. Lead time can vary with order quantity, scheduled production, and the exact package suffix, so confirm the result when the purchase order is prepared. For new production designs, also request lifecycle confirmation and any date-code or traceability requirements.

נתוני עזר הנדסיים עבור MCP3422A1-E/SN — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose MCP3422A1-E/SN for slow, precision-oriented measurements where two differential channels, up to 18-bit resolution, a 3.75-sample/s conversion rate, and an integrated 2.048 V reference fit the sensor bandwidth and signal-conditioning design. MCP3422A2-E/SN is the logical same-family option to evaluate when a different A-series configuration better matches timing or gain requirements while preserving the 8-SOIC footprint. Consider MCP3422A4-E/SN or MCP3422A5-E/SN only after confirming their acquisition behavior, reference configuration, and register workflow against the target design. MCP3422A0T-E/SN may fit when its A0 configuration and T ordering designation are required. None of these alternatives should be approved from package shape alone. For designs needing faster acquisition, choose a converter with a verified higher conversion rate instead of forcing a 3.75-sample/s precision device onto a rapidly changing waveform.

השוואה עם חלופות

פרמטר מוצר זה MCP3422A2-E/SN MCP3422A4-E/SN MCP3422A5-E/SN MCP3422A0T-E/SN
Package 8-SOIC 8-SOIC 8-SOIC 8-SOIC 8-SOIC
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Converter Architecture Delta-sigma ADC Delta-sigma ADC Delta-sigma ADC Delta-sigma ADC Delta-sigma ADC
Resolution Up to 18 bits Up to 18 bits Up to 18 bits Up to 18 bits Up to 18 bits
Input Channels 2 differential channels 2 differential channels 2 differential channels 2 differential channels 2 differential channels
Internal Reference 2.048 V 2.048 V 2.048 V 2.048 V 2.048 V
Digital Interface I2C I2C I2C I2C I2C
Ordering Configuration A1 configuration A2 configuration A4 configuration A5 configuration A0 configuration with T ordering option

מבדילים עיקריים

  • High-resolution differential conversion in a compact interface (לעומתMCP3422A2-E/SN)
  • Defined 3.75-sample/s precision conversion mode (לעומתMCP3422A4-E/SN)
  • Internal reference supports differential measurement range (לעומתMCP3422A5-E/SN)
  • Wide specified industrial temperature range (לעומתMCP3422A0T-E/SN)

הערות תכנון

Route the two differential inputs as a compact, matched pair and keep the analog front end close to the SOIC pins. Avoid sharing sensitive input traces with switching-node, relay-coil, or high-current return paths. Because the converter includes differential inputs and an internal 2.048 V reference, a short and symmetric layout reduces sensitivity to trace resistance, parasitic pickup, and ground differences. Use the manufacturer pin-description and layout examples when assigning the 8-pin footprint.

Place the required bypass capacitors immediately across the appropriate supply and ground pins, and keep the analog and digital return paths low-impedance. The converter accepts 3.3 V or 5 V operation, so do not allow supply transients or analog input excursions beyond the limits in the manufacturer electrical-characteristics table. A stable local supply rail is particularly important because reference noise and supply disturbance can directly influence an 18-bit conversion result.

Apply input filtering where the sensor impedance and required conversion bandwidth are known. The 3.75-sample/s conversion rate targets slow measurements, so aggressive anti-alias filtering is generally compatible with the intended signal class, but the exact filter must also satisfy the converter's input settling requirements. Check differential common-mode limits and the selected gain mode before scaling a bipolar or bridge-connected source; the ±2.048 V range is the internal-reference differential range rather than a universal input-voltage limit.

Do not select a substitute solely because it uses an 8-pin SOIC package. MCP3422 A-series configuration codes can change operating behavior, so verify the conversion mode, gain, acquisition timing, reference selection, and I2C command sequence in the family datasheet. Likewise, a two-channel package does not guarantee equivalent pin compatibility across unrelated ADC families. Preserve the exact pin mapping and validate acquisition results against the target circuit before releasing a drop-in substitution.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

The exact-ordering-code information identifies an automotive-classified device, but an AEC-Q100 qualification statement and detailed RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not established. Verify these requirements for the exact production ordering code before regulatory submission.

הנתונים אומתו בתאריך: 2026-11-15 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

MCP3422A1-E/SN MCP3422A1-E/SN datasheet MCP3422A1-E/SN datasheet pdf MCP3422A1-E/SN pinout MCP3422A1-E/SN equivalent MCP3422A1-E/SN replacement MCP3422A1-E/SN price MCP3422A1-E/SN stock Microchip MCP3422A1-E/SN MCP3422A1-E/SN vs MCP3422A2-E/SN MCP3422A1 18-bit ADC MCP3422A1 8-SOIC pinout MCP3422A1 load cell amplifier MCP3422A1 battery monitoring ADC MCP3422A1 I2C conversion rate

רכיבים ומונחים קשורים

Microchip Technology MCP3422A1-E/SN MCP3422 MCP3422A2-E/SN MCP3422A4-E/SN MCP3422A5-E/SN MCP3422A0T-E/SN delta-sigma ADC analog-to-digital converter data-converter IC signal-chain semiconductor 18-bit resolution differential input 2.048 V precision reference 3.75 samples per second I2C interface 8-pin SOIC SOIC package family surface-mount package load-cell measurement pressure sensing battery monitoring industrial process measurement common-mode noise rejection
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר