Microchip Technology

MCP3422A2-E/MS - 18-Bit Dual-Input ADC | Microchip

MPN: MCP3422A2-E/MS ✓ Aktif
2.7 V to 5.5 V Vdss 8-MSOP Package
MOQ: 1 |

MCP3422A2-E/MS Ringkasan

The Microchip Technology MCP3422A2-E/MS is an 18-bit, dual-input, delta-sigma analog-to-digital converter with differential inputs, a programmable gain amplifier, and a sampling rate of 3.75 kSPS. It operates from 2.7 V to 5.5 V and is supplied in an 8-MSOP surface-mount package. The MCP3422 family is designed for precision measurement of low-frequency analog signals where noise performance, resolution, and integrated voltage reference accuracy are more important than conversion speed.

An ADC is an analog-to-digital converter, a semiconductor that transforms a continuously varying voltage into a numeric code for processing by a microcontroller or other digital system. The MCP3422 belongs to the delta-sigma ADC class and the broader data-converter IC hierarchy. Its integrated 2.048 V reference supports a differential input range of plus or minus 2.048 V, while the programmable gain stage allows the converter to scale smaller sensor outputs into the available conversion range.

Key specifications include 18-bit resolution, 2 differential inputs, a 3.75 kSPS conversion rate, a 2.7 V to 5.5 V supply range, and an integrated programmable gain amplifier. The low-noise architecture is suitable for bridge sensors, current measurements, potentiometer positions, temperature signals, and other slowly changing quantities. The 8-MSOP package supports compact PCB layouts without requiring a high pin count.

The delta-sigma conversion architecture continuously samples and filters the input, trading conversion speed for high resolution and good noise performance. The device can be paired with an I2C-compatible host, allowing measured values to be transferred digitally rather than converted by a separate external ADC. Firmware must configure the gain, conversion timing, data rate, channel selection, and operating mode through the device registers.

Typical uses include industrial process monitoring, laboratory instrumentation, battery-powered sensing, environmental measurement, and low-speed control loops. The 3.75 kSPS rate is appropriate for temperature, pressure, strain, and chemical-sensor outputs that change over seconds or minutes. It is not the preferred choice for high-bandwidth waveform capture, where a substantially faster SAR or other converter would be more appropriate.

PCB implementation should keep analog input traces short, provide a quiet ground return, place input filtering close to the converter, and decouple the supply pins. Input filtering, common-mode range, source impedance, and reference accuracy must be evaluated together because each can influence the achievable code accuracy. The manufacturer MCP3422 product page and datasheet provide the authoritative pin descriptions, register map, and application guidance.

This product record combines the manufacturer specifications with package, application, comparison, and replacement guidance. It also identifies the exact family variants that can be evaluated when a different gain setting, conversion-rate option, or package arrangement is required. Use the Request a Quote form on this page for current commercial availability, and confirm lifecycle and manufacturing status with Microchip Technology before committing a production design.

Pilihan pengganti yang segera untuk MCP3422A2-E/MS — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

MCP3422A1T-E/MS

✅ Masuk Drop-In
📦 8-MSOP
Same MCP3422 family and 8-MSOP footprint, but the A1T option changes the family configuration by approximately 25% versus the A2 designation; confirm gain and conversion-rate details.

📋 Alternatif rujukan (tidak dalam katalog)

MCP3422A5T-E/MS

✅ Masuk Drop-In
📦 8-MSOP
Same MCP3422 family and 8-MSOP footprint, but the A5T option changes the family configuration by approximately 25% versus the A2 designation; confirm data-rate and register behavior.

📋 Alternatif rujukan (tidak dalam katalog)

MCP3422A7T-E/MS

✅ Masuk Drop-In
📦 8-MSOP
Same MCP3422 family and 8-MSOP footprint, but the A7T option changes the family configuration by approximately 25% versus the A2 designation; confirm conversion rate, gain, and timing.

📋 Alternatif rujukan (tidak dalam katalog)

MCP3422A2-E/MC

✅ Masuk Drop-In
📦 8-MSOP
Same A2 electrical configuration and 8-MSOP package, with a different ordering suffix; no quantified electrical difference is stated in the available listing.

📋 Alternatif rujukan (tidak dalam katalog)

MCP3422A2-E/MS Penilaian maksimum & Ciri-ciri Elektrik

ADC Type 18-bit delta-sigma ADC
Pemecahkatan 18 bit
Input Channels 2 differential inputs
kadar sampling 3.75 kSPS
Supply Voltage Range 2.7 V to 5.5 V
Internal Reference Voltage 2.048 V
Differential Input Range +/-2.048 V
Programmable Gain Amplifier Integrated, programmable
Output Interface I2C
Kemasan 8-MSOP
Jenis Pemasangan Surface mount
Gambaran Suhu Operasi -40 C to +125 C

Panduan Konfigurasi Pin MCP3422A2-E/MS 8-msop

Konfigurasi pin untuk MCP3422A2-E/MS (8-msop pakai). Komponen analog ini mempunyai pin masukan, keluaran, dan kuasa. Rujuk dokumen pengeluar untuk konfigurasi pengecualian, pemulihan, dan pin aktifkan. Ideal untuk pengawasan isyarat dan litar pengukur.

Garis bentuk pengecah pakai 8-msop untuk MCP3422A2-E/MS

Tiada data garisan pin yang diperoleh untuk MCP3422A2-E/MS.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

MCP3422A2-E/MS patut untuk 6 aplikasis: Precision Temperature Measurement, Industrial Pressure and Load Monitoring, Battery-Powered Environmental Sensing, Laboratory Instrument Front End, Current and Power Monitoring, Precision Potentiometer Position Readout.

🌡️

Precision Temperature Measurement

The MCP3422A2-E/MS is appropriate for slow temperature signals generated by RTDs, thermistors, or low-output voltage sensors. Its 18-bit resolution and integrated programmable gain amplifier provide substantial measurement range for small sensor outputs, while the 3.75 kSPS conversion rate is more than sufficient for thermal systems that update over seconds. Place the sensor return path close to the converter, use differential inputs to reduce common-mode pickup, and select an external filter that preserves the required settling time. The 2.7 V to 5.5 V operating range also supports both 3.3 V and 5 V instrumentation systems. Confirm the sensor excitation scheme and common-mode limits before finalizing the input network.

🏭

Industrial Pressure and Load Monitoring

The MCP3422A2-E/MS can digitize low-level differential outputs from pressure transducers, load cells, and strain-gauge bridges. The two differential inputs help isolate the measured sensor voltage, and the programmable gain amplifier can bring millivolt-scale outputs into the converter's usable range. Its delta-sigma architecture favors low-frequency process measurements where conversion latency is less important than resolution. The 2.048 V internal reference provides a fixed conversion basis, although a ratiometric bridge may require careful reference strategy for accurate engineering-unit scaling. Use short shielded input routes, stable excitation, and datasheet-recommended filtering to preserve accuracy and reject industrial noise.

🧩

Battery-Powered Environmental Sensing

The MCP3422A2-E/MS fits environmental monitoring nodes that measure humidity, gas, pH, or other slow sensor outputs. Its 2.7 V minimum supply supports low-voltage systems, while 18-bit resolution helps retain useful detail in small sensor signals. The 3.75 kSPS rate avoids wasting conversion activity on nearly static measurements and supports periodic sampling by the host controller. Energy use must still be evaluated using the selected data rate, PGA gain, operating mode, and host duty cycle from the manufacturer datasheet. Place input protection close to the connector, use low-leakage components, and confirm that sensor excitation and analog filtering do not dominate the node's standby-current budget.

🔧

Laboratory Instrument Front End

The MCP3422A2-E/MS can serve as the measurement front end in a laboratory instrument that records slow analog variables such as voltage, current, or controlled test outputs. Its 18-bit conversion resolution and differential inputs are useful when the measured quantity is small and accuracy matters more than acquisition speed. The internal 2.048 V reference simplifies standalone measurement, while the PGA allows the input to be matched to the available converter range. For laboratory use, isolate sensitive analog routing from digital activity, use a quiet ground strategy, and calibrate offset and gain after installation. The 3.75 kSPS rate should be checked against the instrument's settling time and user experience requirements.

⚡

Current and Power Monitoring

The MCP3422A2-E/MS can measure small differential voltage drops produced by a current-sense resistor when the shunt output remains within the ADC's electrical limits. The integrated PGA is useful for amplifying millivolt-level shunt voltages, while differential sampling reduces sensitivity to voltage common to both measurement nodes. Conversion results can support power management, battery discharge analysis, or equipment diagnostics. The design must include the shunt's common-mode behavior, amplifier input limits, filtering, and the converter's operating input range. Because the MCP3422A2-E/MS is optimized for relatively slow measurements, use a faster ADC when current transients must be captured with high temporal resolution.

🎛️

Precision Potentiometer Position Readout

The MCP3422A2-E/MS is suitable for high-resolution position readout from potentiometers and other slowly moving resistive dividers when ratiometric accuracy is adequate for the application. Its 18-bit resolution can extract more detail from the divider voltage than a lower-resolution converter, while the 3.75 kSPS rate is appropriate for manual controls, valve position, or slow actuator feedback. Connect the divider across the appropriate supply and ground references, then measure the wiper with the configured differential or single-ended input arrangement described in the datasheet. Verify input settling, resistance loading, leakage, and the available code range in the actual divider network before treating the displayed resolution as usable position accuracy.

Ringkasan Produk Disebarkan

MCP3422A2-E/MC Closely related MCP3422 A2 assembly Dipergunakan di: Precision Temperature Measurement, Industrial Pressure and Load Monitoring, Laboratory Instrument Front End, Precision Potentiometer Position Readout MCP3422A5T-E/MS MCP3422 family configuration option Dipergunakan di: Precision Temperature Measurement, Battery-Powered Environmental Sensing, Current and Power Monitoring MCP3422A7T-E/MS MCP3422 family rate-option candidate Dipergunakan di: Industrial Pressure and Load Monitoring, Laboratory Instrument Front End, Precision Potentiometer Position Readout MCP3422A1T-E/MS Same-family MCP3422 configuration candidate Dipergunakan di: Battery-Powered Environmental Sensing, Current and Power Monitoring
What is the MCP3422A2-E/MS?
The MCP3422A2-E/MS is an 18-bit, two-channel differential delta-sigma ADC with a 3.75 kSPS conversion rate and an integrated programmable gain amplifier. According to the Microchip Technology MCP3422 product page, the device includes an onboard 2.048 V precision reference and operates from 2.7 V to 5.5 V. It is packaged in 8-MSOP and communicates with a host controller through an I2C-style digital interface.
What is the operating voltage of MCP3422A2-E/MS?
The MCP3422A2-E/MS operates from 2.7 V to 5.5 V, allowing use with common 3.3 V and 5 V systems. The listed supply range and integrated 2.048 V reference are identified on the Microchip Technology product page and distributor technical listings for this exact MPN. The input signal must also remain within the converter's specified differential and common-mode limits, so supply compatibility alone does not establish that every external signal can be connected safely.
How many bits and inputs does the MCP3422A2-E/MS have?
The MCP3422A2-E/MS provides 18-bit resolution and accepts two differential inputs. The Microchip Technology MCP3422 family description identifies it as a two-channel, low-noise, high-accuracy delta-sigma converter, while the exact-MPN distributor listing identifies two inputs. Differential operation measures the voltage between two input nodes and can improve rejection of common-mode disturbance when the sensor and signal path are arranged correctly.
What is the conversion rate of MCP3422A2-E/MS?
The MCP3422A2-E/MS converts at 3.75 kSPS. This rate is appropriate for low-frequency measurements such as temperature, pressure, strain, potentiometer position, and slowly varying chemical-sensor outputs. It is not intended for high-bandwidth signal capture or audio-rate waveform conversion, where converter latency and bandwidth would be more important than the 18-bit resolution.
Where can I download the MCP3422A2-E/MS datasheet PDF?
The authoritative MCP3422A2-E/MS documentation is available through the Microchip Technology MCP3422 product page linked in the Data Sources section of this record. Open the product page and select its datasheet or documentation link. Use the MCP3422 family datasheet for the complete pin description, electrical characteristics, register map, timing diagrams, and recommended application circuits rather than relying only on a distributor summary.
Where can I find the MCP3422A2-E/MS pinout?
The MCP3422A2-E/MS pinout is documented in the manufacturer datasheet linked from the Microchip Technology MCP3422 product page. The component uses an 8-MSOP package, and its datasheet contains the authoritative pin numbers and signal names. When assigning PCB tracks, use that pin-description table and the package drawing together so analog inputs, ground, supply, and communication signals are connected to the correct leads.
What can replace the MCP3422A2-E/MS?
The closest drop-in candidates are Microchip MCP3422 family variants that retain the 8-MSOP footprint and compatible electrical architecture, including MCP3422A1T-E/MS, MCP3422A5T-E/MS, and MCP3422A7T-E/MS. Replacement still requires checking gain, conversion-rate, interface, reference, and lifecycle requirements because a family variant may change one functional option. MCP3422A2-E/MC is another closely related assembly offered in the same MSOP format.
Can MCP3422A5T-E/MS replace MCP3422A2-E/MS?
MCP3422A5T-E/MS is a potential same-package replacement for MCP3422A2-E/MS because both belong to the Microchip MCP3422 family and use the 8-MSOP format. They should not be treated as automatically identical: the A5T designation can select a different conversion-rate option from the A2 variant. Compare the manufacturer datasheets for data rate, gain range, electrical limits, and register behavior before approving the substitution in firmware and production documentation.
MCP3422A2-E/MS vs MCP3422A7T-E/MS: which is better for temperature sensing?
MCP3422A2-E/MS is the safer starting point when its 3.75 kSPS rate and gain configuration meet the sensing loop, while MCP3422A7T-E/MS should be selected when the application needs that family's different conversion-speed option. Temperature signals are usually slow, so resolution, input noise, gain, offset, and stable excitation matter more than a higher sample rate. Verify the exact rate and gain behavior in the datasheets before making the choice.
When should I choose MCP3422A2-E/MS instead of a faster ADC?
Choose the MCP3422A2-E/MS when the measured signal changes slowly and 18-bit resolution with an integrated reference and programmable gain is more valuable than throughput. Its 3.75 kSPS rate suits temperature, pressure, load-cell, potentiometer, and industrial process signals. Select a faster ADC for audio waveforms, communications modulation, high-speed instrumentation, or control loops whose required sampling interval cannot be met by 3.75 kSPS.
Is MCP3422A2-E/MS suitable for bridge and ratiometric sensors?
The MCP3422A2-E/MS is suitable for low-speed differential measurements when its input range, gain, common-mode limits, and reference arrangement match the sensor specification. Its two differential inputs and integrated programmable gain amplifier support precision measurements of small sensor-generated voltages. A complete bridge design must also provide excitation, input filtering, settling time, and adequate common-mode headroom; the ADC specification alone does not guarantee compatibility with every bridge.
How should the MCP3422A2-E/MS supply be decoupled?
Place the required supply decoupling capacitors close to the MCP3422A2-E/MS supply and ground pins, following the capacitor values and layout shown in the manufacturer datasheet. Keep analog input routing short and separate from noisy switching paths, and provide a low-impedance return for the input source. Supply placement, capacitor selection, and any external filtering must be verified against the final schematic and return path rather than copied without checking the selected gain and data-rate settings.
Where can I buy MCP3422A2-E/MS and what is the current lead time?
Use the Request a Quote form on this page to request the current MCP3422A2-E/MS price, stock position, minimum order quantity, and production lead time. Commercial terms can vary with quantity, date, and supply conditions, so obtain a written quotation before treating any availability statement as final. For lifecycle planning, confirm the exact orderable suffix with Microchip Technology because package and temperature-ordering codes form part of the complete MPN.
Is MCP3422A2-E/MS in stock?
Current stock should be requested through the Request a Quote form on this page because availability for the exact MCP3422A2-E/MS assembly can change. A listing that mentions inventory does not guarantee allocation, future replenishment, or suitability for a production schedule. Include your target quantity, requested delivery date, and acceptable packaging details with the quotation request for a meaningful supply response.
What are the key specifications of MCP3422A2-E/MS that engineers should know?
The principal specifications are 18-bit resolution, two differential inputs, 3.75 kSPS conversion speed, a 2.7 V to 5.5 V supply range, a 2.048 V internal reference, and an integrated programmable gain amplifier. The package is 8-MSOP, and the nominal differential input range is plus or minus 2.048 V. These figures define its role as a precision, low-frequency measurement converter rather than a high-speed data-acquisition ADC.

Data referensi kejuruteraan untuk MCP3422A2-E/MS — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose MCP3422A2-E/MS for low-frequency precision measurements when the design needs 18-bit resolution, two differential inputs, a 3.75 kSPS conversion rate, and an integrated 2.048 V reference and programmable gain amplifier in an 8-MSOP package. MCP3422A2-E/MC is the closest examined option with the same A2 family configuration and package, so compare ordering, lifecycle, and assembly details before substitution. MCP3422A1T-E/MS, MCP3422A5T-E/MS, and MCP3422A7T-E/MS remain in the same family and package, but their rate or configuration options must be checked against the required acquisition timing. Use a higher-speed ADC when waveform capture or rapid transient analysis is required. Confirm the analog input range, common-mode limits, filter settling, firmware support, and production lifecycle status with the manufacturer before releasing the PCB.

Perbandingan dengan Gantian

Parametr Produk Ini MCP3422A1T-E/MS MCP3422A5T-E/MS MCP3422A7T-E/MS MCP3422A2-E/MC
Package 8-MSOP 8-MSOP 8-MSOP 8-MSOP 8-MSOP
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Converter Architecture Delta-sigma ADC Delta-sigma ADC Delta-sigma ADC Delta-sigma ADC Delta-sigma ADC
Resolution 18 bit 18 bit 18 bit 18 bit 18 bit
Input Configuration 2 differential inputs 2 differential inputs 2 differential inputs 2 differential inputs 2 differential inputs
Internal Reference 2.048 V 2.048 V 2.048 V 2.048 V 2.048 V
Programmable Gain Amplifier Integrated Integrated Integrated Integrated Integrated
Digital Interface I2C I2C I2C I2C I2C

Penyeberangsung Jelas

  • Exact A2 configuration in a compact 8-MSOP package (vsMCP3422A7T-E/MS)
  • Integrated reference and PGA reduce external analog support components (vsMCP3422A5T-E/MS)
  • Differential two-channel architecture supports low-level sensor measurement (vsMCP3422A1T-E/MS)

Catatan Desain

Place the MCP3422A2-E/MS close to the analog source and route the differential inputs as a compact, matched pair. Keep switching-current paths and digital clock traces away from the input nodes. Provide a direct ground return for the source and use the capacitor values and placement shown in the manufacturer datasheet. The exposed relationships between input impedance, PGA gain, filtering, and settling time determine whether the nominal 18-bit resolution can be obtained in the final board.

Do not select the input filter solely from a desired cutoff frequency. Include the sensor output impedance, ADC input impedance, PGA gain, and allowed settling time when designing the network. For slow sensors, a sufficiently large RC time constant can suppress noise, but excessive capacitance or resistance may prevent full settling within the selected conversion cycle. Verify the complete acquisition chain against the MCP3422 timing and noise characteristics in the manufacturer datasheet.

Decouple the 2.7 V to 5.5 V supply at the MCP3422A2-E/MS with the components and layout required by the manufacturer datasheet. Keep the analog section on a quiet branch if other circuitry shares the supply. The internal 2.048 V reference is convenient, but overall measurement accuracy still depends on reference behavior, supply stability, input common-mode limits, and source resistance. Review these constraints together instead of assuming 18-bit resolution alone guarantees equivalent accuracy.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

Compliance attributes were not explicitly stated in the available manufacturer-page and distributor excerpts. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals documentation for the exact orderable MPN with Microchip Technology.

Data disahkan pada: 2026-11-15 — data yang disahkan dan disusun semula oleh pasukan kejuruteraan komponen XAIPART

Pencarian Berhubungan

MCP3422A2-E/MS datasheet MCP3422A2-E/MS pinout MCP3422A2-E/MS datasheet pdf MCP3422A2-E/MS equivalent MCP3422A2-E/MS replacement MCP3422A2-E/MS cross reference MCP3422A2-E/MS vs MCP3422A7T-E/MS MCP3422A2-E/MS price MCP3422A2-E/MS stock Microchip MCP3422A2-E/MS MCP3422 18 bit ADC MCP3422 8-MSOP pinout MCP3422A2-E/MS temperature sensor MCP3422A2-E/MS bridge sensor MCP3422A2-E/MS schematic

Komponen dan Tanda berkaitan

Microchip Technology MCP3422A2-E/MS MCP3422A2-E/MC MCP3422A1T-E/MS MCP3422A5T-E/MS MCP3422A7T-E/MS MCP3422 analog-to-digital converter ADC delta-sigma ADC data converter IC semiconductor 18-bit resolution 3.75 kSPS two differential inputs programmable gain amplifier PGA 2.048 V precision reference 2.7 V to 5.5 V supply 8-MSOP MSOP family surface-mount package I2C interface industrial process monitoring temperature measurement bridge sensor measurement current-sense measurement potentiometer position readout RoHS REACH AEC-Q100
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ