Microchip Technology

MCP3426A4-E/SN - 16-Bit Dual-Channel I2C ADC | Microchip

MPN: MCP3426A4-E/SN ✓ Aktif
2.048 V Vdss 8-pin SOIC Package
MOQ: 1 |

MCP3426A4-E/SN Ringkasan

The Microchip Technology MCP3426A4-E/SN is a 16-bit, dual-channel, sigma-delta analog-to-digital converter with a maximum conversion rate of 240 samples per second and a 2.7 V to 5.5 V supply range. The device is packaged in an 8-pin SOIC and uses an I2C interface for digital communication. Its on-board 2.048 V precision reference supports a differential input range of ±2.048 V, while the A4 gain configuration is optimized for low-noise measurement at 15 samples per second.

A sigma-delta ADC is a voltage-to-digital converter that uses oversampling, digital filtering, and noise shaping to obtain high resolution from low-noise analog inputs. Within the data-converter hierarchy, the MCP3426 belongs to the delta-sigma ADC family, which is a type of ADC used for precision measurement. Its two-channel differential architecture suits instrumentation, industrial sensing, and low-frequency process-control systems where accurate conversion of small analog signals is more important than maximum sampling speed.

The principal features include up to 16-bit resolution, two analog input channels, an integrated 2.048 V reference, differential input capability, an I2C interface, and operation from 2.7 V to 5.5 V. The A4 configuration converts at 15 samples per second, providing a comparatively slow conversion rate that supports high-resolution, low-noise acquisition. The manufacturer identifies the operating temperature range as -40 °C to +125 °C, making the device suitable for industrial and extended-temperature equipment.

The converter’s sigma-delta architecture shifts much of the signal processing into the digital filter. This is useful when measuring slowly changing sensor outputs because in-band noise can be reduced without requiring a high-frequency SAR converter. Differential inputs also allow a sensor to be measured across two signal nodes, rejecting common-mode disturbances when the sensor return is referenced appropriately. The integrated reference removes the need for an external reference source, simplifying analog front-end design.

Typical uses include pressure and temperature sensor acquisition, current measurement, laboratory instrumentation, environmental monitoring, and low-speed industrial data logging. In these systems, the MCP3426A4-E/SN can digitize a differential sensor output and report the conversion through the I2C bus to a microcontroller or embedded controller. The 240 samples-per-second device-family maximum provides design margin for configurations that require faster acquisition than the A4 operating rate.

For reliable implementation, follow the manufacturer datasheet for analog input biasing, bypass-capacitor placement, I2C pull-up selection, and input common-mode limits. Pay particular attention to source impedance and differential polarity because excessive impedance or an out-of-range common-mode voltage can degrade conversion accuracy. Place input and supply decoupling close to their associated pins and route the differential pair to minimize pickup of switching noise.

This product page combines the manufacturer’s published device characteristics with practical application guidance, pin-assignment information, lifecycle status, sourcing workflow, and a constrained comparison of directly relevant family variants. It is designed to help engineers determine whether the MCP3426A4-E/SN matches the resolution, channel count, interface, speed, package, and temperature requirements of a new precision-measurement design.

Pilihan pengganti yang segera untuk MCP3426A4-E/SN — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

Varietas dalam siri ini

Model serupa yang kompatibel dengan pengganti yang segera MCP3426A4-E/SN (sama faktor bentuk dan kaki) — berbeza dalam Differential Input Range, Package, Operating Temperature Range, Number of Input Channels, Resolution.

Microchip Technology
Differential Input Range: -2.048 V to +2.048 V
Operating Temperature Range: -40 degrees C to +125 degrees C
Microchip Technology
Differential Input Range: ±2.048 V differential
Package: 8-pin SOIC, 0.154 in (3.90 mm) wide
Number of Input Channels: 2
Microchip Technology
Package: 8-pin SOIC, 3.90 mm body width
Operating Temperature Range: -40°C to +125°C
Resolution: Up to 16 bits

MCP3426A4T-E/SN

✅ Masuk Drop-In
📦 8-pin SOIC
Related 8-pin SOIC ordering variant with the same 16-bit, dual-channel A4 conversion specification; temperature-grade and shipment-form suffixes require confirmation against the manufacturer ordering table.

📋 Alternatif rujukan (tidak dalam katalog)

MCP3426A4-E/SN Penilaian maksimum & Ciri-ciri Elektrik

ADC Type Sigma-delta
Pemecahkatan 16 bit
Number of Input Channels 2 channels
Maximum Conversion Rate 240 samples/s
A4 Conversion Rate 15 samples/s
Internal Reference Voltage 2.048 V
Differential Input Range ±2.048 V
Supply Voltage Range 2.7 V to 5.5 V
Digital Interface I2C
Input Type Differential
Gambaran Suhu Operasi -40 °C to +125 °C
Kemasan 8-pin SOIC
Jenis Pemasangan Surface mount
Status RoHS Compliant

Konfigurasi Pin MCP3426A4-E/SN

SOIC-8 Package Pinout Diagram SOIC-8 8-pin small outline IC, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOIC-8
Pin 1 SCL — I2C clock input
Pin 2 SDA — I2C bidirectional data input and output
Pin 3 AIN1+ — Positive input for analog channel 1
Pin 4 AIN1- — Negative input for analog channel 1
Pin 5 AIN0+ — Positive input for analog channel 0
Pin 6 AIN0- — Negative input for analog channel 0
Pin 7 VSS — Ground connection
Pin 8 VDD — Positive supply connection

Aplikasi Biasa

MCP3426A4-E/SN patut untuk 6 aplikasis: Precision Temperature Sensing, Industrial Pressure Sensor Acquisition, Battery Current Measurement, Environmental Monitoring, Laboratory Instrumentation, Data Logging and Sensor Hubs.

🌡️

Precision Temperature Sensing

The MCP3426A4-E/SN is appropriate for ratiometric or differential temperature-sensor interfaces that require accurate, slow measurements rather than high-speed sampling. Its 16-bit resolution and 15-sample-per-second A4 conversion rate provide a useful balance for thermal monitoring, where sensor drift is normally much slower than the ADC conversion rate. The integrated 2.048 V reference stabilizes the measurement reference, while the differential input architecture can reduce common-mode errors when the sensor return is properly connected. In a practical circuit, the sensor drives AIN0+ and AIN0-, with filtering placed close to the converter. The designer should verify that the sensor excitation, output voltage, and common-mode level remain within the input limits and account for the 2.7 V to 5.5 V supply requirement when choosing pull-up and protection components.

🏭

Industrial Pressure Sensor Acquisition

The MCP3426A4-E/SN can digitize differential outputs from bridge and strain-gauge pressure sensors when the measured signal changes at a rate compatible with 15 samples per second. Its 16-bit resolution can preserve small changes in sensor output, while the ±2.048 V differential range provides room for bipolar signals around the internal reference. The two analog channels allow a pressure transducer and a temperature reference or calibration channel to be acquired with one converter. Place input filtering and sensor excitation decoupling near the PCB rather than routing the sensitive pair across switching nodes. The 2.7 V to 5.5 V operating range supports common embedded supply rails, but the final front end must maintain the common-mode voltage required by the sensor and should include protection suitable for the industrial environment.

⚡

Battery Current Measurement

The MCP3426A4-E/SN is useful for low-rate battery or energy-storage current measurements where a shunt produces a differential voltage. At 15 samples per second in the A4 configuration, it can capture gradual current changes without the conversion burden of a high-rate ADC. The 2.048 V internal reference allows a shunt amplifier to be scaled against a stable reference, and the second channel can monitor a related voltage or current channel. Designers should select the shunt and amplifier for low offset and noise because converter resolution does not eliminate errors contributed by the analog front end. Differential routing, grounding, and isolation from switching converters are critical, particularly when the shunt sits near a high-current power path. The complete measurement chain must remain compatible with the ADC's 2.7 V to 5.5 V supply and input limits.

🧩

Environmental Monitoring

The MCP3426A4-E/SN fits environmental monitoring systems that measure slowly changing gas, humidity, or water-quality sensor outputs through differential amplifier stages. The A4 operating rate of 15 samples per second is appropriate for periodic readings, while up to 16-bit resolution can improve the useful dynamic range of small sensor signals. Two input channels can serve two sensor nodes, a reference channel, or a diagnostic input. A practical implementation should use low-leakage protection components because sensor outputs may source only microamps, and it should place anti-alias filtering at the analog inputs. The internal 2.048 V reference reduces the component count, while I2C permits periodic readings from a host microcontroller. Verify that each sensor signal remains inside the differential and common-mode limits throughout its operating range.

🧰

Laboratory Instrumentation

The MCP3426A4-E/SN is appropriate for bench instruments that measure slowly varying, low-level differential voltages and need accurate digital results. Its 16-bit resolution, integrated reference, and dual-channel architecture can simplify front-panel sensor conditioning or calibration logging. The 15-sample-per-second A4 rate suits meters, chart recorders, and process-calibration equipment, although it should not be selected for waveform capture or fast transient analysis. Use the second channel to capture a reference or monitor an excitation source, and retain a separate precision reference path if absolute accuracy requirements exceed the internal reference performance. PCB layout should keep the differential inputs away from relay contacts, display drivers, and other switching devices. Firmware must also accommodate the converter's configured data rate and conversion latency before reporting a measurement.

📡

Data Logging and Sensor Hubs

The MCP3426A4-E/SN can serve as the analog acquisition element in a compact industrial or building sensor hub. Two differential channels can monitor two slow sensor outputs, while the I2C interface connects the converter to a host processor without requiring a dedicated parallel data bus. The A4 rate of 15 samples per second is appropriate for periodic logging of temperature, pressure, flow proxies, and similar signals. Integrated 2.048 V reference and 16-bit resolution reduce front-end complexity, although external calibration may be required for stringent system accuracy. Select passive filtering components carefully so that settling time is adequate for the operating mode and source impedance. The converter should be powered from a clean regulated rail, and the host firmware should detect conversion completion and identify each channel consistently after power-up.

Ringkasan Produk Disebarkan

MCP3427 Related delta-sigma ADC family member Dipergunakan di: Precision Temperature Sensing, Industrial Pressure Sensor Acquisition, Battery Current Measurement, Environmental Monitoring, Data Logging and Sensor Hubs MCP3428 Related delta-sigma ADC family member Dipergunakan di: Precision Temperature Sensing, Industrial Pressure Sensor Acquisition, Environmental Monitoring, Laboratory Instrumentation, Data Logging and Sensor Hubs MCP3426 Same Microchip dual-channel delta-sigma ADC family Dipergunakan di: Battery Current Measurement, Laboratory Instrumentation
What is the MCP3426A4-E/SN?
The MCP3426A4-E/SN is a 16-bit, dual-channel, delta-sigma analog-to-digital converter with differential inputs, an integrated 2.048 V reference, and an I2C interface. According to the Microchip MCP3426/7/8 datasheet, the A4 configuration operates at 15 samples per second within a 240-sample-per-second device family, and the converter is packaged in an 8-pin SOIC.
What is the resolution and conversion rate of MCP3426A4-E/SN?
The MCP3426A4-E/SN provides up to 16-bit resolution and operates at 15 samples per second in its A4 configuration. The manufacturer identifies 240 samples per second as the maximum rate for the device family. This lower A4 rate supports precision acquisition, while the published specifications confirm the part also accepts a 2.7 V to 5.5 V supply.
What is the input voltage range of MCP3426A4-E/SN?
The MCP3426A4-E/SN supports a differential input range of ±2.048 V using the on-board 2.048 V precision reference. According to the Microchip MCP3426/7/8 datasheet, both analog channels use differential inputs. The supply itself operates separately over 2.7 V to 5.5 V, so the reference voltage and signal range should not be confused with supply voltage.
Where can I download the MCP3426A4-E/SN datasheet PDF?
The official MCP3426A4-E/SN datasheet PDF is available from Microchip Technology at the MCP3426/7/8 Data Sheet link on this page. The document covers the 16-bit delta-sigma converter, dual differential channels, 2.048 V internal reference, I2C operation, electrical characteristics, and the 8-pin SOIC pin assignments. Use the manufacturer PDF for final schematic, layout, and timing decisions.
Where can I find the MCP3426A4-E/SN pinout?
The MCP3426A4-E/SN uses an 8-pin SOIC with I2C, supply, ground, and two differential analog-channel connections. The complete numbered assignment is shown in the pinout section of this page, while the Microchip MCP3426/7/8 datasheet remains the authoritative source for package drawings and connection details. Confirm pin polarity before routing AIN+ and AIN- traces.
Where can I buy MCP3426A4-E/SN online?
Use the Request a Quote form on this page to request MCP3426A4-E/SN availability, volume pricing, and lead time. The form is the appropriate channel for an exact 8-pin SOIC order and can also clarify factory packaging, tube quantities, and reel requirements. Avoid substituting the 8-DFN MCP3426A4-E/MC variant because its package is not pin-compatible with the SOIC footprint.
What is the price of MCP3426A4-E/SN?
The current unit price for MCP3426A4-E/SN is not stated here because pricing changes with quantity and market conditions. Submit the Request a Quote form on this page with your required quantity, packaging preference, and target date. The quote team can confirm the exact MCP3426A4-E/SN ordering code, commercial availability, and applicable volume breaks.
What is the lead time for MCP3426A4-E/SN?
The current lead time for MCP3426A4-E/SN should be confirmed through the Request a Quote form on this page. Include the required quantity, tube or reel preference, destination, and required delivery date so procurement can plan around current production and inventory conditions. The part is listed as active, but a project-specific delivery commitment requires a current quotation.
Is MCP3426A4-E/SN in stock?
The MCP3426A4-E/SN is offered by multiple authorized supply channels, but real-time stock can change without notice. Use the Request a Quote form on this page to request current availability for the exact 8-pin SOIC ordering code. Specify quantity and packaging requirements to obtain a stock confirmation rather than relying on a general family-level inventory indication.
MCP3426A4-E/SN vs MCP3426A4T-E/SN - which is better?
MCP3426A4-E/SN and MCP3426A4T-E/SN are closely related orderable versions of the same 16-bit, dual-channel 8-pin SOIC converter, but the suffix difference must be checked against the manufacturer ordering table for temperature and shipping-package details. The MCP3426A4-E/SN is the selected SOIC part on this page. Use the Request a Quote form and state the required package form before ordering either variant.
When should I choose MCP3426A4-E/SN over another delta-sigma ADC?
Choose MCP3426A4-E/SN when the design needs two differential channels, up to 16-bit resolution, an integrated 2.048 V reference, an I2C interface, and an 8-pin SOIC footprint. Its 15-sample-per-second A4 rate favors slow precision measurements rather than waveform capture. For faster acquisition, higher channel counts, or another package, select a converter whose speed and pinout satisfy those requirements.
Is MCP3426A4-E/SN suitable for low-frequency sensor measurements?
Yes, the MCP3426A4-E/SN is well suited to low-frequency differential sensor measurements because the A4 configuration converts at 15 samples per second and supports up to 16-bit resolution. The integrated 2.048 V reference simplifies excitation and scaling, while differential inputs help reject common-mode disturbance. Verify the sensor output range and common-mode voltage against the manufacturer specifications before finalizing the analog front end.
What can replace MCP3426A4-E/SN?
A true drop-in replacement for MCP3426A4-E/SN must use the same 8-pin SOIC footprint, preserve the I2C pinout, provide two differential inputs, and match the 16-bit, 2.7 V to 5.5 V operating requirements closely enough for the application. The available family comparison identifies MCP3426A4T-E/SN as the closest related ordering variant. Any substitution should still be checked for register compatibility, conversion rate, and temperature grade.
Is MCP3426A4-E/SN the same as MCP3426A4-E/MC?
No, MCP3426A4-E/SN and MCP3426A4-E/MC are not the same physical orderable device. The MCP3426A4-E/SN is an 8-pin SOIC, whereas the MCP3426A4-E/MC is an 8-DFN package measuring 2 mm by 3 mm. Their footprints differ, so the DFN version is not a direct drop-in replacement for an existing SOIC PCB layout.
What are the key specifications of MCP3426A4-E/SN that engineers should know?
The key specifications are 16-bit resolution, two differential channels, a 15-sample-per-second A4 conversion rate, a 240-sample-per-second family maximum, a 2.048 V internal reference, and a ±2.048 V differential input range. According to the Microchip MCP3426/7/8 datasheet, the device operates from 2.7 V to 5.5 V, supports I2C communication, uses an 8-pin SOIC package, and is rated from -40 °C to +125 °C.

Data referensi kejuruteraan untuk MCP3426A4-E/SN — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose MCP3426A4-E/SN for precision, low-frequency acquisition requiring two differential channels, 16-bit resolution, a 2.048 V internal reference, and an I2C-connected 8-pin SOIC footprint. It is particularly suitable for temperature, pressure, current, and environmental sensors whose useful bandwidth is well below the 15-sample-per-second A4 conversion rate. MCP3426A4T-E/SN is the closest related ordering variant identified for the same family, but suffix-specific temperature and shipment-form details must be confirmed before substitution. The MCP3426A4-E/MC is not a drop-in option because it uses an 8-DFN package. For faster sampling, more channels, different accuracy targets, or another interface, evaluate a converter with matching electrical and pin requirements rather than forcing the MCP3426A4-E/SN into an incompatible design.

Perbandingan dengan Gantian

Parametr Produk Ini MCP3426A4T-E/SN
Package 8-pin SOIC 8-pin SOIC
Brand Microchip Technology Microchip Technology
ADC Type Sigma-delta Sigma-delta
Resolution 16 bit 16 bit
Input Channels 2 channels 2 channels
A4 Conversion Rate 15 samples/s 15 samples/s
Internal Reference 2.048 V 2.048 V
Differential Input Range ±2.048 V ±2.048 V
Supply Voltage Range 2.7 V to 5.5 V 2.7 V to 5.5 V
Digital Interface I2C I2C
Operating Temperature Range -40 °C to +125 °C Confirm suffix-specific rating in the Microchip ordering table

Penyeberangsung Jelas

  • Integrated precision reference simplifies the measurement chain (vsMCP3426A4T-E/SN)
  • A4 operating mode prioritizes precision over maximum throughput (vsMCP3426A4T-E/SN)
  • Two differential channels in a compact 8-pin SOIC (vsMCP3426A4T-E/SN)

Catatan Desain

Route AIN0+ and AIN0- as a closely coupled differential pair, and do the same for AIN1+ and AIN1-. Keep these traces away from switching-regulator outputs, relay contacts, crystals, and high-current paths. Place input filtering close to the corresponding pins and connect the return path to the device ground reference without sharing narrow segments with noisy currents.

The MCP3426A4-E/SN operates from 2.7 V to 5.5 V. Place the required supply bypass capacitor close to VDD and VSS, and verify that the selected regulator remains stable with the converter's load transitions. Because the device uses an internal 2.048 V reference, measurement accuracy still depends on clean supply voltage and low-noise analog layout; an unstable or noisy supply can degrade the acquired result.

Do not treat the 240-sample-per-second family maximum as the MCP3426A4-E/SN conversion rate; the A4 configuration operates at 15 samples per second. Firmware must allow enough conversion time before reading a completed result. Also confirm differential polarity, input common-mode limits, and source impedance because a numerically correct ADC cannot compensate for an out-of-range or improperly biased analog input.

Avoid long analog traces through electrically noisy board regions. Use continuous ground planes, return both differential inputs through the same analog section, and consider guarding sensitive nodes if leakage from high-impedance sensors is significant. The digital I2C lines may be longer than the analog pair, but they still require suitable pull-up resistors and should be kept separate from sensitive input traces to minimize conversion injection.

Maklumat Kesediaan

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

The component listing identifies MCP3426A4-E/SN as RoHS compliant. No separate REACH, halogen-free, conflict-minerals, or automotive-qualification statement is established by the available technical information.

Data disahkan pada: 2026-11-15 — data yang disahkan dan disusun semula oleh pasukan kejuruteraan komponen XAIPART

Pencarian Berhubungan

MCP3426A4-E/SN datasheet MCP3426A4-E/SN pinout MCP3426A4-E/SN specifications MCP3426A4-E/SN price MCP3426A4-E/SN stock MCP3426A4-E/SN equivalent MCP3426A4-E/SN replacement MCP3426A4-E/SN vs MCP3426A4T-E/SN Microchip MCP3426A4-E/SN MCP3426A4 16 bit ADC MCP3426A4-E/SN application circuit MCP3426A4-E/SN footprint

Komponen dan Tanda berkaitan

Microchip Technology MCP3426A4-E/SN MCP3426A4T-E/SN MCP3426 MCP3427 MCP3428 delta-sigma ADC sigma-delta analog-to-digital converter ADC data converter semiconductor I2C differential input internal reference 2.048 V precision reference 16-bit resolution SOIC-8 surface mount SMD RoHS industrial sensor measurement pressure sensor current measurement environmental monitoring
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ