Microchip Technology

MCP3426A6-E/MC - 16-Bit Dual-Channel ADC | Microchip

MPN: MCP3426A6-E/MC ✓ Aktif
2.048 V Vdss 8-DFN, 2 x 3 mm Package
MOQ: 1 |

MCP3426A6-E/MC Ringkasan

Microchip Technology MCP3426A6-E/MC is a 16-bit, dual-channel delta-sigma analog-to-digital converter operating at 15 samples per second in an 8-DFN 2 x 3 mm package. It provides differential inputs, a 2.048 V on-board precision reference, and a two-wire I2C interface for compact measurement systems.

A delta-sigma ADC is an analog-to-digital converter that uses oversampling and digital filtering to provide high resolution and noise performance from low-frequency sensor signals. In the broader device hierarchy, it belongs to the ADC and DAC class, sits below data converters, and operates as a mixed-signal interface IC. Differential inputs allow the converter to reject common-mode noise when a sensor is measured across two input lines.

Key features include up to 16-bit conversion resolution, two independent analog input channels, differential operation, an internal 2.048 V reference, and a two-wire I2C digital interface. The 2.048 V reference establishes a differential input range of ±2.048 V according to the Microchip product page. This combination suits sensors whose output is centered around zero and whose signal amplitude fits the converter’s differential range.

The MCP3426 family combines continuous conversion operation with low-noise delta-sigma conversion. Its two-wire interface reduces the number of signal connections required when the converter shares a bus with other sensors or a microcontroller. The A6 ordering option is identified in distributor records as a 15 SPS configuration, making it appropriate for slow-changing measurements where moderate throughput is more important than maximum sampling speed.

Typical uses include pressure, temperature, strain, and low-level analog sensor instrumentation, as well as industrial monitoring systems and battery-powered measurement nodes. Differential sensor connections are particularly useful when sensor wiring is long or when the measured signal is small relative to environmental electrical noise.

PCB design should preserve a quiet analog signal path, provide effective decoupling at VDD and VREF, and route the differential inputs away from switching nodes and high-current traces. Differential input filtering, grounding, and connector placement can materially affect the noise performance observed in the final conversion result.

This product page combines the manufacturer specifications with practical guidance for PCB implementation, application selection, pin assignment, and drop-in replacement assessment. It also identifies where speed, resolution, package, addressing, or interface differences must be checked before treating another MCP3426 ordering code as a replacement.

Pilihan pengganti yang segera untuk MCP3426A6-E/MC — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

Varietas dalam siri ini

Model serupa yang kompatibel dengan pengganti yang segera MCP3426A6-E/MC (sama faktor bentuk dan kaki) — berbeza dalam Digital Interface, Number of Input Channels, Package, Conversion Rate.

Microchip Technology
Number of Input Channels: 2
Package: 8-DFN (2 x 3 mm)
Microchip Technology
Digital Interface: I2C
Package: 8-DFN (2 x 3 mm)
Conversion Rate: 15 samples/s

MCP3426A0-E/MC

✅ Masuk Drop-In
Microchip Technology
📦 8-DFN, 2 x 3 mm
16 bit · 2 channels · Differential · Delta-sigma · 15 samples/s · 2.048 V · ±2.048 V · 2.7 V to 5.5 V

Hubungi untuk harga

Lihat Datasheet →

MCP3426A1-E/MC

✅ Masuk Drop-In
Microchip Technology
📦 8-DFN, 2 x 3 mm
Up to 16 bits · 2 · Delta-sigma · Differential · 240 samples/s · 2.048 V · ±2.048 V · Two-wire I2C

Hubungi untuk harga

Lihat Datasheet →

MCP3426A4-E/MC

✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan
Microchip Technology
📦 8-DFN, 2 x 3 mm
16 bit · 2 channels · Differential · Delta-sigma · 15 samples/s · 2.048 V · ±2.048 V · I2C

Hubungi untuk harga

Lihat Datasheet →

MCP3426A6-E/MC Penilaian maksimum & Ciri-ciri Elektrik

Converter Type 16-bit delta-sigma ADC
Number of Input Channels 2 channels
Conversion Rate 15 SPS
Pemecahkatan Up to 16 bits
Input Architecture Differential inputs
Internal Reference Voltage 2.048 V
Differential Input Range ±2.048 V
Digital Interface Two-wire I2C
Kemasan 8-DFN, 2 x 3 mm
Jenis Pemasangan Surface mount
Exposed Pad Present

Konfigurasi Pin MCP3426A6-E/MC

QFN-8 (2x2mm, EP) Package Pinout Diagram QFN-8 2x2mm, P0.5mm, EP 0.7x1.3mm, JEDEC MO-229. Pin 1 by dot. 1 2 3 4 5 6 7 8 QFN-8 (2x2mm, EP)
Pin 1 VDD — Positive analog supply input
Pin 2 VREF — Reference voltage input and internal reference bypass connection
Pin 3 AIN0- — Negative input for analog channel 0
Pin 4 AIN0+ — Positive input for analog channel 0
Pin 5 AIN1- — Negative input for analog channel 1
Pin 6 AIN1+ — Positive input for analog channel 1
Pin 7 SCL — I2C clock input
Pin 8 SDA — I2C data input and output

Aplikasi Biasa

MCP3426A6-E/MC patut untuk 6 aplikasis: Industrial Pressure Sensing, Precision Temperature Acquisition, Battery-Powered Sensor Nodes, Strain and Load Cell Instrumentation, Environmental Monitoring Equipment, Battery Chemistry Measurement.

🏭

Industrial Pressure Sensing

The MCP3426A6-E/MC suits bridge or ratiometric pressure sensors whose output is small, differential, and changes relatively slowly. Its two differential input channels can monitor two sensing elements, while the 2.048 V internal reference supports measurements within a ±2.048 V differential range. At 15 SPS, the converter is suited to static or slowly varying process variables rather than transient waveform capture. Differential routing helps reduce common-mode pickup from factory wiring and surrounding switching equipment. Engineers should verify the sensor output range, input common-mode limits, and excitation scheme before finalizing the analog front end.

🌡️

Precision Temperature Acquisition

The MCP3426A6-E/MC can digitize low-level outputs from resistive temperature sensors, RTD conditioning networks, or temperature sensors with a differential output. A 15 SPS conversion rate is generally appropriate for thermal measurements that evolve over seconds rather than milliseconds, and the 16-bit conversion resolution preserves fine code-level detail. The ±2.048 V differential range can accommodate suitably conditioned bipolar signals without a separate external reference. The compact 8-DFN package also conserves board space in multi-channel monitoring equipment. Input filtering and thermal placement remain important because sensor noise and gradient can dominate the final measurement accuracy.

🔋

Battery-Powered Sensor Nodes

The MCP3426A6-E/MC is appropriate for compact, battery-operated sensor nodes that report slow-changing measurements over a two-wire serial bus. The 15 SPS rate limits conversion throughput to a level that many environmental, energy, and occupancy sensors do not need, helping align acquisition demand with low-power system behavior. Its dual-channel architecture can reduce the number of separate converter packages when two low-frequency analog quantities must be measured. The 8-DFN 2 x 3 mm footprint supports dense portable assemblies. Firmware must request the supported conversion rate, handle the programmed I2C address correctly, and use sleep or duty-cycle strategies between measurements.

⚖️

Strain and Load Cell Instrumentation

The MCP3426A6-E/MC is well matched to differential strain-gauge and load-cell front ends, where the useful signal appears across two bridge nodes and common-mode voltage can be substantial. The converter evaluates the difference between the analog input pairs rather than measuring either node independently, which helps reject shared noise. Up to 16-bit resolution supports detailed signal representation, and the 2.048 V internal reference defines a differential measurement range of ±2.048 V. Mechanical excitation, settling time, bridge supply behavior, and cable interference must be considered. A stable excitation source and careful guard or return-path layout are often more important to final accuracy than converter resolution alone.

🧩

Environmental Monitoring Equipment

The MCP3426A6-E/MC can monitor environmental sensors that change over seconds or minutes, including gas, humidity, pH, and light sensors with conditioned analog outputs. Two differential channels allow one converter to service two sensing channels while retaining a compact 8-DFN footprint. The 15 SPS operation provides frequent updates without requiring a high-speed SAR ADC, and the internal 2.048 V reference simplifies analog-range planning. Because environmental sensors often have slow response times, input filters can suppress periodic interference without preventing useful updates. The I2C interface also supports compact embedded instrumentation with a microcontroller controlling conversion timing and data acquisition.

🔋

Battery Chemistry Measurement

The MCP3426A6-E/MC can acquire differential cell-voltage or balancing-system signals in laboratory battery monitoring equipment where accuracy is required at relatively low update rates. Its 16-bit resolution can represent small voltage changes, while the two input channels can monitor adjacent elements or two measurement points. The 15 SPS rate is suitable for battery aging and capacity tests in which voltage evolves gradually. The differential architecture helps reject common-mode variation if the measurement remains within the specified input and common-mode limits. Designers should compensate sensor and wiring errors in calibration, confirm whether the chosen ordering code’s configuration supports the intended I2C address, and provide stable reference and supply decoupling.

What is the MCP3426A6-E/MC?
The MCP3426A6-E/MC is a 16-bit, dual-channel delta-sigma analog-to-digital converter from Microchip Technology. According to the manufacturer product page, it accepts differential inputs, provides an on-board 2.048 V precision reference, supports a ±2.048 V differential input range, and uses a two-wire I2C interface. The device is packaged in an 8-DFN package measuring 2 x 3 mm.
What is the conversion speed of MCP3426A6-E/MC?
The MCP3426A6-E/MC performs conversions at 15 samples per second. This rate is identified in the Mouser product record for the exact ordering code. It is appropriate for slow-changing analog quantities such as temperature, pressure, strain, and chemical sensor outputs, where the higher throughput of faster converter options is generally unnecessary.
Where can I download the MCP3426A6-E/MC datasheet PDF?
The MCP3426A6-E/MC datasheet PDF is available directly from Microchip Technology at the official MCP3426/7/8 data-sheet URL listed on this page. The document covers the MCP3426, MCP3427, and MCP3428 family members and is the appropriate source for the pin description, electrical characteristics, ordering information, internal reference details, and application circuits.
Where can I find the MCP3426A6-E/MC pinout?
The MCP3426A6-E/MC pin assignment is shown in the Microchip MCP3426/7/8 data sheet and is represented here for its 8-DFN package. The device includes VDD, VREF, four differential analog-input pins, SCL, SDA, and an exposed ground pad. Use the manufacturer pin-description table when assigning tracks and thermal-pad connections.
What are the key specifications of MCP3426A6-E/MC that engineers should know?
The MCP3426A6-E/MC combines up to 16-bit resolution, two differential input channels, a 15 SPS conversion rate, a 2.048 V internal reference, and a two-wire I2C interface. According to Microchip’s product page, the internal reference supports a ±2.048 V differential input range. The device is packaged in a compact 8-DFN 2 x 3 mm surface-mount package.
Can MCP3426A6-E/MC measure bipolar signals?
Yes. The MCP3426A6-E/MC supports differential bipolar measurement because its two input pins define a voltage difference rather than a single signal relative to ground. With the on-board 2.048 V reference, the manufacturer specifies a differential input range of ±2.048 V. Input common-mode and overvoltage limits must still be checked in the device electrical characteristics.
MCP3426A6-E/MC vs MCP3426A0-E/MC - which is better?
MCP3426A0-E/MC is identified by DigiKey as a parametric equivalent and substitute for MCP3426A6-E/MC. Both belong to the same 8-DFN MCP3426 family, but the ordering suffix can encode factory-programmed I2C address options and related configuration details. Choose the part whose address and configuration match the existing bus design, and verify the complete ordering information before replacement.
What is the difference between MCP3426A6-E/MC and MCP3426A1-E/MC?
MCP3426A6-E/MC and MCP3426A1-E/MC are MCP3426-family orderings that use the same 8-DFN format and support dual-channel delta-sigma conversion. Their factory-programmed I2C address or configuration suffixes differ, which can affect compatibility with an existing bus. The A6 code is identified as the 15 SPS configuration, while a complete comparison should check addressing, conversion rate, and operating limits.
When should I choose MCP3426A6-E/MC over another MCP3426 ordering code?
Choose MCP3426A6-E/MC when the design needs the 15 SPS configuration, dual differential channels, the 2.048 V internal reference, and an 8-DFN 2 x 3 mm footprint. Select another ordering code only when it provides a required I2C address, conversion rate, or qualification level while preserving the same package and electrical limits. A compatibility review should include address selection and firmware expectations.
Is MCP3426A6-E/MC suitable for low-level sensor measurement?
The MCP3426A6-E/MC is suitable for low-level sensor measurement when the signal remains within its ±2.048 V differential range. Differential inputs help reject common-mode disturbances, while the internal 2.048 V reference provides a stable conversion basis. For very slow signals, consider whether 15 SPS provides enough update rate and use input filtering appropriate to the sensor bandwidth.
What can replace MCP3426A6-E/MC?
MCP3426A0-E/MC is the clearest verified replacement candidate for MCP3426A6-E/MC because it is identified as a parametric equivalent and uses the same MCP3426 family format. Before substituting it, confirm the factory-programmed I2C address, conversion timing, exposed-pad layout, supply requirements, and temperature grade against the original design. No verified cross-brand drop-in replacement was identified.
Is there a verified cross-brand equivalent for MCP3426A6-E/MC?
No verified cross-brand drop-in equivalent for MCP3426A6-E/MC was identified in the available manufacturer and cross-reference information. A replacement must match the 8-DFN footprint, differential input architecture, reference arrangement, I2C address behavior, supply voltage, and conversion timing. A similarly specified ADC with a different package or register map should not be treated as a direct replacement.
Where to buy MCP3426A6-E/MC online?
Use the Request a Quote form on this page to request availability, current lead time, and ordering support for MCP3426A6-E/MC. The form allows the exact 8-DFN ordering code to be reviewed for quantity, packaging, and delivery requirements without relying on a static stock statement. Lifecycle and technical suitability should be confirmed before releasing a production order.
What is the price of MCP3426A6-E/MC?
The current commercial price for MCP3426A6-E/MC should be requested through the Request a Quote form on this page. Quote handling accounts for the exact MPN, quantity, delivery terms, and supply conditions. Engineers should not substitute a price shown for a different MCP3426 ordering code because suffix and address options can affect catalog identity and availability.
What is the lead time and stock status for MCP3426A6-E/MC?
Request the current lead time, minimum order quantity, and stock allocation for MCP3426A6-E/MC through the Request a Quote form on this page. Availability can vary with order quantity and purchasing conditions, so a confirmed quotation is more useful than a generic inventory claim. Include the required delivery date and the exact manufacturer ordering code in the request.

Data referensi kejuruteraan untuk MCP3426A6-E/MC — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose MCP3426A6-E/MC for compact, low-frequency measurements that require two differential inputs, up to 16-bit resolution, a 2.048 V internal reference, and a 15 SPS conversion rate. It is particularly suitable for pressure, temperature, strain, battery, and environmental sensors whose output lies within the ±2.048 V differential range. MCP3426A0-E/MC is the best documented alternative when its factory-programmed configuration and address match the board. MCP3426A1-E/MC or MCP3426A4-E/MC should be selected only after confirming their ordering-code differences, conversion timing, and I2C behavior. No cross-brand part is recommended as a direct replacement because the available information does not establish a pin-compatible 8-DFN device with equivalent addressing and electrical behavior.

Perbandingan dengan Gantian

Parametr Produk Ini MCP3426A0-E/MC MCP3426A1-E/MC MCP3426A4-E/MC
Package 8-DFN, 2 x 3 mm 8-DFN, 2 x 3 mm 8-DFN, 2 x 3 mm 8-DFN, 2 x 3 mm
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Converter Type 16-bit delta-sigma ADC 16-bit delta-sigma ADC 16-bit delta-sigma ADC 16-bit delta-sigma ADC
Input Channels 2 channels 2 channels 2 channels 2 channels
Input Architecture Differential Differential Differential Differential
Internal Reference 2.048 V 2.048 V 2.048 V 2.048 V
Differential Input Range ±2.048 V ±2.048 V ±2.048 V ±2.048 V
Digital Interface Two-wire I2C Two-wire I2C Two-wire I2C Two-wire I2C
Factory-Programmed Configuration A6 ordering code A0 ordering code A1 ordering code A4 ordering code

Penyeberangsung Jelas

  • Verified same-family substitute with matching physical architecture (vsMCP3426A0-E/MC)
  • Dual differential channels in a compact footprint (vsMCP3426A1-E/MC)
  • 15 SPS operating point for slow-changing measurements (vsMCP3426A4-E/MC)

Catatan Desain

Place the VDD and VREF decoupling capacitors immediately beside their associated device pins, with the VREF connection routed away from analog input traces. The manufacturer application guidance emphasizes short, compact connections around the converter because long supply and reference paths can introduce impedance and coupling. Connect the exposed pad according to the data-sheet land pattern, and provide uninterrupted ground-plane area beneath the package.

Route AIN0+ and AIN0- as a closely coupled differential pair, and keep AIN1+ and AIN1- together on the opposite side of the device when practical. Avoid crossing sensitive input traces with digital clock lines, relay-control nets, DC-DC converter switches, and high-current return paths. Connectors and sensor returns can introduce common-mode and ground-potential errors, so input grounding should be evaluated as part of the complete measurement chain.

Apply differential filtering close to the analog pins when the sensor bandwidth permits it. Filter values should preserve the required response time at the 15 SPS conversion rate rather than unnecessarily suppressing useful signal changes. For slow sensors, additional digital averaging in firmware can improve repeatability, but it must not create an aliased result if the analog signal changes significantly between conversion commands.

Do not treat every MCP3426 ordering code as electrically interchangeable without checking the factory-programmed configuration and I2C address. The physical package can remain unchanged while bus addressing or conversion timing differs. Also keep the differential input voltage and each input’s common-mode voltage within the manufacturer’s limits; the ±2.048 V differential range alone does not imply unrestricted input-node voltages.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

Compliance status for the exact MCP3426A6-E/MC ordering code was not stated in the available manufacturer or distributor information. Confirm RoHS, REACH, automotive qualification, lead-free, halogen-free, and conflict-minerals documentation with Microchip before releasing a regulated production design.

Data disahkan pada: 2026-11-15 — data yang disahkan dan disusun semula oleh pasukan kejuruteraan komponen XAIPART

Pencarian Berhubungan

MCP3426A6-E/MC datasheet MCP3426A6-E/MC pinout MCP3426A6-E/MC specifications MCP3426A6-E/MC equivalent MCP3426A6-E/MC replacement MCP3426A6-E/MC price MCP3426A6-E/MC stock MCP3426 16-bit ADC MCP3426 8-DFN pinout MCP3426A6-E/MC vs MCP3426A0-E/MC MCP3426A6-E/MC pressure sensor MCP3426A6-E/MC application circuit Microchip MCP3426A6-E/MC MCP3426 dual channel delta sigma ADC

Komponen dan Tanda berkaitan

Microchip Technology MCP3426A6-E/MC MCP3426A0-E/MC MCP3426A1-E/MC MCP3426A4-E/MC MCP3426 delta-sigma ADC analog-to-digital converter mixed-signal IC data converter 16-bit resolution dual channel differential input 2.048 V reference two-wire I2C 15 SPS 8-DFN QFN family surface-mount package pressure sensor temperature sensor strain gauge RoHS REACH AEC-Q100
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ