MPC565CZP56 - 56MHz 1MB Flash Automotive MCU | NXP
MPN: MPC565CZP56 ✗ Akhir HayatMPC565CZP56 Ringkasan
The MPC565 is a 32-bit RISC microcontroller rather than a general-purpose processor. Its architecture combines a Power Architecture core, an integrated floating-point unit, advanced peripherals, and 1 MB of program flash on one device. This combination is useful in automotive body, powertrain-adjacent, industrial control, communications, and embedded systems where deterministic control, numerical computation, and a broad peripheral set are needed.
Verified distributor and manufacturer information identifies the MPC565CZP56 as a single-core 56 MHz device with 1 MB of flash organized as 1M x 8 and housed in a 388-PBGA package. The manufacturer also describes the device as suitable for high-performance automotive applications and other control-intensive applications. The part is listed with an industrial temperature grade in distributor results and is identified as an automotive-grade device in a secondary datasheet listing, although the official NXP page indicates an end-of-life lifecycle status.
The MPC565CZP56 should be selected only when the original system design, firmware, memory map, and 388-PBGA land pattern can be retained. Its large BGA package presents substantial PCB-layout, assembly, inspection, and repair requirements. The part is a legacy embedded platform rather than a new-design default; procurement should therefore consider traceability, remaining inventory, and long-term support requirements before committing a new production design.
This page combines the verified manufacturer and distributor identity, package and memory information, lifecycle status, available procurement references, and engineering guidance for design review. It does not infer missing electrical limits, peripheral details, pin names, or pricing that are not present in the supplied source data.
Pilihan pengganti yang segera untuk MPC565CZP56 — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera MPC565CZP56 (sama faktor bentuk dan kaki) — berbeza dalam Operating Temperature, Package, Mounting Type, Code Compression, Core Architecture.
Tiada pilihan pengganti yang segera untuk produk ini.
Minta AlternatifMPC565CZP56 Penilaian maksimum & Ciri-ciri Elektrik
| Product Type | 32-bit Power Architecture microcontroller |
| Core Architecture | Power Architecture instruction-set architecture |
| Core Frequency | 56 MHz |
| Flash Memory | 1 MB (1M x 8) |
| Architecture Width | 32-bit |
| Processor Core Count | Single-core |
| Floating-Point Unit | Integrated floating-point unit |
| Peripheral Set | Advanced peripheral set |
| Kemasan | 388-PBGA (27 x 27 mm) |
| Package Type | PBGA |
| Terminal Count | 388 balls |
| Temperature Grade | Industrial |
| Automotive Positioning | Automotive-grade application positioning |
| Code Compression | Code compression option |
| Status Lingkungan Hidup | End of life |
| Manufacturer | NXP Semiconductors |
| Legacy Manufacturer Branding | Motorola / Freescale Semiconductor |
Panduan Konfigurasi Pin MPC565CZP56 pbga
Konfigurasi pin untuk MPC565CZP56 (pbga pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.
Tiada data garisan pin yang diperoleh untuk MPC565CZP56.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
MPC565CZP56 patut untuk 6 aplikasis: Automotive Body and Chassis Control, Industrial Equipment Controller, Powertrain and Vehicle Network Coordination, Industrial Communications Gateway, Motion and Motor Control, Legacy Test and Measurement Equipment.
Automotive Body and Chassis Control
The MPC565CZP56 fits legacy automotive body or chassis-control platforms where a 32-bit Power Architecture core, 56 MHz operation, and integrated floating-point processing support real-time supervisory and control functions. Its 1 MB of flash can hold application firmware, while the advanced peripheral set is intended to reduce the need for separate support devices. The 388-PBGA package is mechanically demanding, so the design must retain the original ballout and qualified assembly process.
Disebarkan
Industrial Equipment Controller
For industrial machinery and test equipment, the MPC565CZP56 provides a 32-bit control core at 56 MHz with 1 MB of onboard flash and floating-point support. Those resources can support state-machine control, communications coordination, motion or sequencing logic, and supervisory diagnostics. The end-of-life status makes it most appropriate for sustaining an existing installation rather than starting a fresh platform. Validate supply continuity and preserve the original 388-PBGA PCB design.
Disebarkan
Powertrain and Vehicle Network Coordination
The MPC565CZP56 can serve as a supervisory controller in older vehicle electronic systems where deterministic 32-bit computation and floating-point support are useful. NXP specifically describes the MPC565 family as suitable for high-performance automotive applications, including control-intensive use cases. The design still requires validation of communication peripherals, electrical limits, temperature range, diagnostic requirements, and any AEC-Q100 evidence because those details are not present in the supplied source data.
Disebarkan
Industrial Communications Gateway
The 56 MHz 32-bit core and 1 MB flash make the MPC565CZP56 suitable for maintaining legacy communications and protocol tasks in an embedded gateway. A floating-point unit can support numerical processing, while the advanced peripheral set is intended to provide integration for control-oriented designs. Because no verified pinout, I/O map, or transceiver interface is supplied, board-level engineering must use the original NXP documentation before selecting external interface components.
Disebarkan
Motion and Motor Control
The MPC565CZP56's 32-bit Power Architecture core, 56 MHz frequency, and floating-point capability can support supervisory motion control in legacy industrial or vehicle systems. It may coordinate sequencing, calculations, and peripheral-driven control actions when the original application software already targets this device. The verified sources do not specify motor-control timers, PWM channels, or pin assignments, so those functions must be confirmed from the original datasheet and firmware configuration.
Disebarkan
Legacy Test and Measurement Equipment
A legacy test or measurement instrument can use the MPC565CZP56 as a high-level control processor when its original firmware, memory map, and peripheral assignments are already fixed. The 56 MHz core and 1 MB flash provide embedded execution and storage, while the floating-point unit can assist calibration and signal-processing supervisory tasks. The end-of-life status and large 388-PBGA package require long-term sourcing, inspection, and thermal planning rather than a new-design cost optimization.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk MPC565CZP56 — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini |
|---|---|
| Package | 388-PBGA (27 x 27 mm) |
| Brand | NXP Semiconductors |
| Core Architecture | Power Architecture instruction-set architecture |
| Core Frequency | 56 MHz |
| Flash Memory | 1 MB (1M x 8) |
| Architecture Width | 32-bit |
| Processor Configuration | Single-core |
| Floating-Point Support | Integrated floating-point unit |
| Temperature Grade | Industrial |
| Lifecycle Status | End of life |
Penyeberangsung Jelas
- Integrated 56 MHz Power Architecture control core (vsMPC565MVR56)
- On-chip 1 MB flash (vsMPC566MZP56)
- Integrated floating-point processing (vsMPC565MVR56)
- Legacy 388-PBGA integration (vsMPC566MZP56)
Catatan Desain
Preserve the original 388-PBGA land pattern, ball numbering, power-plane distribution, and escape-routing strategy when sustaining or reproducing the MPC565CZP56 design. The supplied data confirms a 27 mm by 27 mm PBGA but does not provide the ball map, so do not derive a footprint from package size alone. Validate the PCB against the original NXP design rules and assembly capability.
Estimate power dissipation and junction temperature from the actual supply voltage, I/O loading, clock activity, and peripheral use before approving a legacy MPC565CZP56 design. Because the supplied data does not contain operating voltage, current, thermal resistance, or package power limits, those values must come from the original datasheet. Use the calculated result as an engineering estimate and verify it with thermal analysis and hardware testing.
Do not substitute a related MPC565 or MPC566 suffix solely because the core family and flash capacity appear similar. Confirm package dimensions, ballout, voltage limits, clock requirements, peripheral mapping, temperature grade, software model, and qualification status. The supplied cross-reference results identify related devices but do not establish any pin-compatible replacement for the MPC565CZP56.
Review every high-speed interface and shared bus against the original NXP timing, impedance, termination, and decoupling requirements. The 56 MHz core frequency and 388-BBGA package do not by themselves define signal-integrity limits. Maintain the original component placement and reference-design layout as closely as possible, especially where high-pin-count BGA escape routing and sensitive interfaces are involved.
Use the original power-supply design and decoupling network for the MPC565CZP56 rather than estimating capacitor values from the 56 MHz core frequency. Confirm supply voltage, sequencing, I/O limits, current consumption, and power-state behavior from the complete manufacturer documentation. Any supply redesign should be checked for startup margin, noise, voltage tolerance, and interaction with the vehicle or industrial system.
Maklumat Kesediaan
The supplied sources identify automotive positioning and an industrial temperature grade, but they do not provide verified RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations. Compliance must be confirmed from the applicable manufacturer or distributor documentation.