MPC565CZP56 - 56MHz 1MB Flash Automotive MCU | NXP
MPN: MPC565CZP56 ✗ اختتامِ زندگیMPC565CZP56 جائزہ
The MPC565 is a 32-bit RISC microcontroller rather than a general-purpose processor. Its architecture combines a Power Architecture core, an integrated floating-point unit, advanced peripherals, and 1 MB of program flash on one device. This combination is useful in automotive body, powertrain-adjacent, industrial control, communications, and embedded systems where deterministic control, numerical computation, and a broad peripheral set are needed.
Verified distributor and manufacturer information identifies the MPC565CZP56 as a single-core 56 MHz device with 1 MB of flash organized as 1M x 8 and housed in a 388-PBGA package. The manufacturer also describes the device as suitable for high-performance automotive applications and other control-intensive applications. The part is listed with an industrial temperature grade in distributor results and is identified as an automotive-grade device in a secondary datasheet listing, although the official NXP page indicates an end-of-life lifecycle status.
The MPC565CZP56 should be selected only when the original system design, firmware, memory map, and 388-PBGA land pattern can be retained. Its large BGA package presents substantial PCB-layout, assembly, inspection, and repair requirements. The part is a legacy embedded platform rather than a new-design default; procurement should therefore consider traceability, remaining inventory, and long-term support requirements before committing a new production design.
This page combines the verified manufacturer and distributor identity, package and memory information, lifecycle status, available procurement references, and engineering guidance for design review. It does not infer missing electrical limits, peripheral details, pin names, or pricing that are not present in the supplied source data.
کے لیے ڈراپ اِن متبادل MPC565CZP56 — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں MPC565CZP56 (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Operating Temperature, Package, Mounting Type, Code Compression, Core Architecture.
اس پروڈکٹ کے لیے کوئی ڈراپ اِن متبادل دستیاب نہیں۔
متبادل کی درخواست کریںMPC565CZP56 زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Product Type | 32-bit Power Architecture microcontroller |
| Core Architecture | Power Architecture instruction-set architecture |
| Core Frequency | 56 MHz |
| Flash Memory | 1 MB (1M x 8) |
| Architecture Width | 32-bit |
| Processor Core Count | Single-core |
| Floating-Point Unit | Integrated floating-point unit |
| Peripheral Set | Advanced peripheral set |
| پیکیج | 388-PBGA (27 x 27 mm) |
| Package Type | PBGA |
| Terminal Count | 388 balls |
| Temperature Grade | Industrial |
| Automotive Positioning | Automotive-grade application positioning |
| Code Compression | Code compression option |
| لائف سائیکل کی حالت | End of life |
| Manufacturer | NXP Semiconductors |
| Legacy Manufacturer Branding | Motorola / Freescale Semiconductor |
MPC565CZP56 pbga پن کنفیگریشن گائیڈ
MPC565CZP56 (pbga پیکیج) کے لیے پن کنفیگریشن۔ اس ڈیجیٹل IC میں GPIO، کمیونیکیشن انٹرفیس (UART، SPI، I2C) اور پاور پنز شامل ہیں۔ متبادل پن فنکشنز اور کنفیگریشن آپشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ ایمبیڈڈ سسٹم ڈیزائن اور PCB لے آؤٹ کے لیے ضروری۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں MPC565CZP56.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
MPC565CZP56 کے لیے موزوں ہے 6 ایپلیکیشنs: Automotive Body and Chassis Control, Industrial Equipment Controller, Powertrain and Vehicle Network Coordination, Industrial Communications Gateway, Motion and Motor Control, Legacy Test and Measurement Equipment.
Automotive Body and Chassis Control
The MPC565CZP56 fits legacy automotive body or chassis-control platforms where a 32-bit Power Architecture core, 56 MHz operation, and integrated floating-point processing support real-time supervisory and control functions. Its 1 MB of flash can hold application firmware, while the advanced peripheral set is intended to reduce the need for separate support devices. The 388-PBGA package is mechanically demanding, so the design must retain the original ballout and qualified assembly process.
تجویز کردہ
Industrial Equipment Controller
For industrial machinery and test equipment, the MPC565CZP56 provides a 32-bit control core at 56 MHz with 1 MB of onboard flash and floating-point support. Those resources can support state-machine control, communications coordination, motion or sequencing logic, and supervisory diagnostics. The end-of-life status makes it most appropriate for sustaining an existing installation rather than starting a fresh platform. Validate supply continuity and preserve the original 388-PBGA PCB design.
تجویز کردہ
Powertrain and Vehicle Network Coordination
The MPC565CZP56 can serve as a supervisory controller in older vehicle electronic systems where deterministic 32-bit computation and floating-point support are useful. NXP specifically describes the MPC565 family as suitable for high-performance automotive applications, including control-intensive use cases. The design still requires validation of communication peripherals, electrical limits, temperature range, diagnostic requirements, and any AEC-Q100 evidence because those details are not present in the supplied source data.
تجویز کردہ
Industrial Communications Gateway
The 56 MHz 32-bit core and 1 MB flash make the MPC565CZP56 suitable for maintaining legacy communications and protocol tasks in an embedded gateway. A floating-point unit can support numerical processing, while the advanced peripheral set is intended to provide integration for control-oriented designs. Because no verified pinout, I/O map, or transceiver interface is supplied, board-level engineering must use the original NXP documentation before selecting external interface components.
تجویز کردہ
Motion and Motor Control
The MPC565CZP56's 32-bit Power Architecture core, 56 MHz frequency, and floating-point capability can support supervisory motion control in legacy industrial or vehicle systems. It may coordinate sequencing, calculations, and peripheral-driven control actions when the original application software already targets this device. The verified sources do not specify motor-control timers, PWM channels, or pin assignments, so those functions must be confirmed from the original datasheet and firmware configuration.
تجویز کردہ
Legacy Test and Measurement Equipment
A legacy test or measurement instrument can use the MPC565CZP56 as a high-level control processor when its original firmware, memory map, and peripheral assignments are already fixed. The 56 MHz core and 1 MB flash provide embedded execution and storage, while the floating-point unit can assist calibration and signal-processing supervisory tasks. The end-of-life status and large 388-PBGA package require long-term sourcing, inspection, and thermal planning rather than a new-design cost optimization.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا MPC565CZP56 — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ |
|---|---|
| Package | 388-PBGA (27 x 27 mm) |
| Brand | NXP Semiconductors |
| Core Architecture | Power Architecture instruction-set architecture |
| Core Frequency | 56 MHz |
| Flash Memory | 1 MB (1M x 8) |
| Architecture Width | 32-bit |
| Processor Configuration | Single-core |
| Floating-Point Support | Integrated floating-point unit |
| Temperature Grade | Industrial |
| Lifecycle Status | End of life |
اہم امتیازی خصوصیات
- Integrated 56 MHz Power Architecture control core (بمقابلہMPC565MVR56)
- On-chip 1 MB flash (بمقابلہMPC566MZP56)
- Integrated floating-point processing (بمقابلہMPC565MVR56)
- Legacy 388-PBGA integration (بمقابلہMPC566MZP56)
ڈیزائن نوٹس
Preserve the original 388-PBGA land pattern, ball numbering, power-plane distribution, and escape-routing strategy when sustaining or reproducing the MPC565CZP56 design. The supplied data confirms a 27 mm by 27 mm PBGA but does not provide the ball map, so do not derive a footprint from package size alone. Validate the PCB against the original NXP design rules and assembly capability.
Estimate power dissipation and junction temperature from the actual supply voltage, I/O loading, clock activity, and peripheral use before approving a legacy MPC565CZP56 design. Because the supplied data does not contain operating voltage, current, thermal resistance, or package power limits, those values must come from the original datasheet. Use the calculated result as an engineering estimate and verify it with thermal analysis and hardware testing.
Do not substitute a related MPC565 or MPC566 suffix solely because the core family and flash capacity appear similar. Confirm package dimensions, ballout, voltage limits, clock requirements, peripheral mapping, temperature grade, software model, and qualification status. The supplied cross-reference results identify related devices but do not establish any pin-compatible replacement for the MPC565CZP56.
Review every high-speed interface and shared bus against the original NXP timing, impedance, termination, and decoupling requirements. The 56 MHz core frequency and 388-BBGA package do not by themselves define signal-integrity limits. Maintain the original component placement and reference-design layout as closely as possible, especially where high-pin-count BGA escape routing and sensitive interfaces are involved.
Use the original power-supply design and decoupling network for the MPC565CZP56 rather than estimating capacitor values from the 56 MHz core frequency. Confirm supply voltage, sequencing, I/O limits, current consumption, and power-state behavior from the complete manufacturer documentation. Any supply redesign should be checked for startup margin, noise, voltage tolerance, and interaction with the vehicle or industrial system.
تعمیل کی معلومات
The supplied sources identify automotive positioning and an industrial temperature grade, but they do not provide verified RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations. Compliance must be confirmed from the applicable manufacturer or distributor documentation.