Texas Instruments

MSP430F1122IPW - 8MHz 16-Bit Mixed-Signal MCU | Texas Instruments

MPN: MSP430F1122IPW ✓ Aktif
2.5 V to 3.3 V Vdss 20-pin TSSOP (0.173 inch, 4.40 mm width) Package 8 MHz Speed 4 KB Memory
MOQ: 1 |

MSP430F1122IPW Ringkasan

Texas Instruments MSP430F1122IPW is an ultra-low-power 16-bit mixed-signal microcontroller with an 8 MHz MSP430 CPU, 4 KB of Flash memory, 256 bytes of SRAM, a 10-bit ADC, and UART/SPI communication in a 20-pin TSSOP package. It is designed for compact embedded systems requiring analog measurement, timing, and low-power control in a compact footprint.

A mixed-signal microcontroller combines a digital microcontroller core with analog peripherals such as an ADC and integrated reference. The MSP430F1122IPW belongs to the MSP430 family of ultra-low-power microcontrollers, using a 16-bit RISC architecture and 16-bit registers to improve code efficiency for embedded control, sensing, and measurement applications. Its integrated communication peripherals also reduce the need for separate interface devices.

The 8 MHz operating speed provides dedicated processing performance for control loops and measurement tasks. The 4 KB Flash memory supports embedded firmware, while 256 bytes of SRAM provides working memory for stack, variables, and data handling. The integrated 10-bit ADC includes a reference and data transfer controller, while the mixed-signal feature set supports applications combining digital logic with analog front ends.

The MSP430F1122IPW is suitable for low-power sensing, industrial instrumentation, appliance control, and embedded measurement systems. Its 20-pin TSSOP package makes it practical for compact PCB layouts where component count and board area are important. The integrated UART and SPI peripherals simplify connection to sensors, displays, transceivers, and other digital peripherals without requiring separate communication controllers.

Designers should pay attention to the available 4 KB Flash memory when sizing firmware, especially when combining application code, calibration data, and communication routines. The ADC, timer, and communication blocks should be assigned according to the manufacturer's pin and peripheral guidance. Decoupling and analog grounding should be planned carefully around the mixed-signal section to preserve measurement quality.

This product page combines the MSP430F1122IPW technical characteristics, package information, compatible alternatives, and practical design guidance. It is intended to help engineers identify the correct MCU for low-power embedded applications and plan a robust implementation around the manufacturer's MSP430F11x2 and MSP430F12x2 mixed-signal controller documentation.

Pilihan pengganti yang segera untuk MSP430F1122IPW — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

MSP430F1121IPW

✅ Masuk Drop-In
📦 20-pin TSSOP
Related MSP430F11x2 controller with the same 20-pin TSSOP package; verify ADC, timer, UART/SPI, and memory requirements against the target

📋 Alternatif rujukan (tidak dalam katalog)

MSP430F1121IPWR

✅ Masuk Drop-In
📦 20-pin TSSOP
Same MSP430F1121 device family in the 20-pin TSSOP package; exact memory and peripheral differences require datasheet verification

📋 Alternatif rujukan (tidak dalam katalog)

MSP430F1122IPWR

✅ Masuk Drop-In
📦 20-pin TSSOP
Same MSP430F1122 configuration and 20-pin TSSOP footprint; orderable suffix differs, so verify the exact suffix and intended packaging

📋 Alternatif rujukan (tidak dalam katalog)

MSP430F1101AIPW

✅ Masuk Drop-In
📦 20-pin TSSOP
Related MSP430 mixed-signal controller in a 20-pin TSSOP package; memory, ADC, timer, and pin-function differences must be checked

📋 Alternatif rujukan (tidak dalam katalog)

MSP430F1101AIPWR

✅ Masuk Drop-In
📦 20-pin TSSOP
Related MSP430F1101A controller in a 20-pin TSSOP package; exact pin and peripheral compatibility requires verification

📋 Alternatif rujukan (tidak dalam katalog)

MSP430F1122IPW Penilaian maksimum & Ciri-ciri Elektrik

Product Type 16-bit ultra-low-power mixed-signal microcontroller
CPU Architecture MSP430 16-bit RISC
Frekuensi Klock Maksimum 8 MHz
Flash Memory 4 KB
SRAM 256 bytes
ADC Resolution 10 bits
ADC Reference Integrated
Data Transfer Controller Integrated
UART Integrated
SPI Integrated
Timer Built-in 16-bit timer
I/O Pins 14 I/O pins
Tegangan Pemberi Arus 2.5 V to 3.3 V
Kemasan 20-pin TSSOP (0.173 inch, 4.40 mm width)
Jenis Pemasangan Surface Mount

Panduan Konfigurasi Pin MSP430F1122IPW 20-pin tssop (0.173 inch, 4.40 mm width)

Konfigurasi pin untuk MSP430F1122IPW (20-pin tssop (0.173 inch, 4.40 mm width) pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.

Garis bentuk pengecah pakai 20-pin tssop (0.173 inch, 4.40 mm width) untuk MSP430F1122IPW

Tiada data garisan pin yang diperoleh untuk MSP430F1122IPW.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

MSP430F1122IPW patut untuk 6 aplikasis: Low-Power Industrial Sensor Node, Battery-Powered Environmental Monitor, Compact Appliance Control Board, Portable Data-Acquisition Module, Smart Sensor Interface, Embedded Instrumentation and Control.

🏭

Low-Power Industrial Sensor Node

The MSP430F1122IPW fits compact industrial sensor nodes where analog measurement and digital control must share a small, low-power MCU. Its integrated 10-bit ADC can sample a conditioned sensor signal without a separate converter, while the built-in 16-bit timer supports periodic sampling and timing tasks. The 4 KB Flash footprint is suitable for tightly scoped firmware, and UART or SPI can connect the node to a local controller. Keep analog routing away from switching nodes and validate the measurement range against the ADC and supply specifications.

🧩

Battery-Powered Environmental Monitor

The MSP430F1122IPW is appropriate for battery-powered environmental monitoring because its mixed-signal architecture combines an 8 MHz 16-bit processor, 10-bit ADC, timer, and communication interfaces in one device. A duty-cycled design can wake for a measurement, process the result in 256 bytes of SRAM, and return to a low-power state between samples. UART provides a simple diagnostics path, while SPI can support a digital sensor. Confirm the device's low-power mode behavior, ADC settling requirements, and supply voltage range in the datasheet.

🔧

Compact Appliance Control Board

The MSP430F1122IPW can serve as the central controller in a compact appliance control board where a small package, mixed-signal measurement, and serial communications are required. The 14 I/O pins support digital control functions, while the ADC can monitor a potentiometer, temperature signal, or other conditioned analog input. The 8 MHz CPU provides useful control-loop performance without requiring a larger system. The 20-pin TSSOP package reduces board area, although external level translation or protection may be needed for long harness connections.

📡

Portable Data-Acquisition Module

The MSP430F1122IPW is well suited to a small data-acquisition module that must digitize several slow-changing analog signals and transfer results over a serial link. Its 10-bit ADC with integrated reference simplifies the analog front end, while the 16-bit timer can establish deterministic sampling intervals. SPI can connect to an external memory or sensor, and UART can report measurements to a host. Use the 256-byte SRAM carefully for buffers and validate acquisition timing, input impedance, and noise performance against the application bandwidth.

📱

Smart Sensor Interface

The MSP430F1122IPW can act as a smart interface between analog sensors and a higher-level digital system. Its integrated ADC handles the measurement side, while UART and SPI provide flexible connectivity to a sensor, storage device, or communications module. The compact 20-pin TSSOP package helps when the interface must fit behind a sensor or inside a small enclosure. Firmware should configure the ADC, timer, and communication peripheral for the required sampling sequence, and the PCB should provide local bypassing and controlled analog grounding.

🖥️

Embedded Instrumentation and Control

The MSP430F1122IPW is applicable to embedded instrumentation where a controller must acquire analog values, execute timing logic, and communicate with test equipment. The 8 MHz MSP430 CPU provides a 16-bit processing platform for control and measurement functions, and the integrated ADC reference reduces the external analog component count. SPI can connect to a display or storage device, while UART can provide a service interface. For laboratory or industrial environments, add appropriate protection, isolation, calibration, and grounding beyond the MCU's direct electrical requirements.

Ringkasan Produk Disebarkan

MSP430F1121IPW Related MSP430F11x2 mixed-signal controller Dipergunakan di: Low-Power Industrial Sensor Node, Battery-Powered Environmental Monitor, Compact Appliance Control Board, Portable Data-Acquisition Module, Smart Sensor Interface, Embedded Instrumentation and Control MSP430F1101AIPW Related MSP430 mixed-signal controller Dipergunakan di: Low-Power Industrial Sensor Node, Compact Appliance Control Board, Smart Sensor Interface MSP430F1122IPWR Same MSP430F1122 controller family Dipergunakan di: Battery-Powered Environmental Monitor, Portable Data-Acquisition Module, Embedded Instrumentation and Control
What is the MSP430F1122IPW?
The MSP430F1122IPW is a Texas Instruments 16-bit ultra-low-power mixed-signal microcontroller with an 8 MHz CPU, 4 KB of Flash memory, 256 bytes of SRAM, a 10-bit ADC, UART, SPI, and a built-in 16-bit timer. It is packaged in a 20-pin TSSOP and is intended for compact embedded sensing and control systems. According to the manufacturer datasheet, the device includes 14 I/O pins and an integrated ADC reference with a data transfer controller.
What are the key specifications of MSP430F1122IPW that engineers should know?
The MSP430F1122IPW combines an 8 MHz MSP430 16-bit RISC core with 4 KB of Flash, 256 bytes of SRAM, a 10-bit ADC, UART, SPI, and a built-in 16-bit timer in a 20-pin TSSOP package. The operating supply range is 2.5 V to 3.3 V. According to the Texas Instruments product page and datasheet, its 14 I/O pins, integrated ADC reference, and mixed-signal peripherals make it suitable for low-power measurement and embedded control designs.
Where can I download the MSP430F1122IPW datasheet PDF?
The official MSP430F1122IPW datasheet is available from Texas Instruments at the MSP430F1122 product-page link and through the manufacturer PDF URL. The document covers the MSP430x11x2 and MSP430x12x2 mixed-signal microcontroller families, including the 16-bit timer, 10-bit ADC with integrated reference, data transfer controller, UART, SPI, and I/O configuration. Use the manufacturer documentation for pin assignments, electrical limits, and programming guidance.
Where can I find the MSP430F1122IPW pinout?
The MSP430F1122IPW pinout is documented in the manufacturer datasheet, where the 20-pin TSSOP device is shown with its supply pins, ground pins, I/O assignments, reset function, and analog/peripheral connections. The package is a 20-pin TSSOP, also identified in distributor listings as PDSO20. Before routing a PCB, use the pin-description and package diagrams in the official datasheet to confirm every signal and exposed function.
What is the operating voltage of the MSP430F1122IPW?
The MSP430F1122IPW operates from a 2.5 V to 3.3 V supply, as identified in the verified manufacturer and distributor information for this exact device. That range supports common low-voltage embedded systems and allows the MCU to operate directly from 3.3 V rails. Check the datasheet's recommended operating conditions and absolute maximum ratings for the exact pin, temperature, and supply conditions relevant to the design.
How much Flash memory and SRAM does the MSP430F1122IPW have?
The MSP430F1122IPW provides 4 KB of Flash memory and 256 bytes of SRAM. According to the manufacturer product page, the Flash is organized as 4K x 8 for the target device listing, while the SRAM provides working storage for the firmware execution environment. The 4 KB limit is an important design constraint for code size, boot logic, calibration data, and communication routines.
Can the MSP430F1122IPW replace an MSP430F1121IPW?
The MSP430F1121IPW is a closely related device in the MSP430F11x2 family and is the most relevant same-package replacement candidate, but the replacement should be confirmed against the required peripheral set, memory map, and pin assignments in the manufacturer datasheet. The MSP430F1122IPW provides 4 KB of Flash, 256 bytes of SRAM, a 10-bit ADC, UART, SPI, and an 8 MHz CPU. Firmware and board-level compatibility must be validated before substitution.
Is the MSP430F1122IPW suitable for low-power sensor applications?
Yes, the MSP430F1122IPW is suitable for low-power sensor applications because it is an ultra-low-power mixed-signal MCU with an integrated 10-bit ADC, integrated ADC reference, timer, and 256 bytes of SRAM. These peripherals allow a design to measure an analog signal and process it without adding a separate ADC or timing controller. Use the MSP430 low-power operating modes and the datasheet's peripheral guidance to balance measurement accuracy, response time, and duty cycle.
What is the difference between MSP430F1122IPW and MSP430F1101AIPW?
The MSP430F1122IPW is specified with an 8 MHz CPU, 4 KB of Flash, 256 bytes of SRAM, and a 10-bit ADC, while the MSP430F1101AIPW is a related MSP430 mixed-signal controller with a different device variant and potentially different peripheral or memory characteristics. Both use a 20-pin TSSOP-style package in the listed comparison, but pin compatibility and firmware compatibility must be checked in the individual manufacturer datasheets before treating either as a drop-in replacement.
When should I choose MSP430F1122IPW over another MSP430 controller?
Choose the MSP430F1122IPW when the design needs a compact 20-pin TSSOP mixed-signal controller with an 8 MHz 16-bit CPU, 4 KB of Flash, 256 bytes of SRAM, a 10-bit ADC, UART, SPI, and a timer. It is a practical fit for low-power measurement and control products. Select another MSP430 variant when the application requires more memory, more I/O, a different package, or a peripheral set not present in this device.
What is the best drop-in replacement for MSP430F1122IPW?
The closest drop-in candidates are MSP430F1121IPW and related MSP430F11x2 controllers in the same 20-pin TSSOP family, subject to verification of ADC, timer, communication, memory, and pin-function requirements. The MSP430F1122IPW is the baseline exact device with 4 KB of Flash, 256 bytes of SRAM, UART, SPI, and a 10-bit ADC. Use the manufacturer datasheets and a firmware-level peripheral check rather than relying on package appearance alone.
What can replace the MSP430F1122IPW?
A replacement should begin with the MSP430F1121IPW because it is a same-family MSP430F11x2 device associated with a 20-pin TSSOP listing, then be evaluated against other MSP430 variants from the available family options. The candidate must match the required package footprint and preserve the 10-bit ADC, timer, UART/SPI requirements, memory needs, and board-level pin functions. Firmware, interrupt vectors, and peripheral configuration must also be reviewed before replacement.
How do I design the power and decoupling layout for MSP430F1122IPW?
Place the supply decoupling capacitor close to the MSP430F1122IPW power pins and connect ground returns directly to the device ground pins using the shortest practical paths. Separate sensitive analog inputs and ADC-related routing from noisy digital switching where the board layout permits. Because the device combines digital control with analog measurement, return-current control and stable reference behavior are important. Follow the recommended application circuit and layout guidance in the manufacturer datasheet.
How much memory is available for firmware on MSP430F1122IPW?
The MSP430F1122IPW has 4 KB of Flash for firmware and 256 bytes of SRAM for runtime working memory. This is sufficient for compact control, sensing, and communication firmware when the code is organized carefully. Reserve space for interrupt routines, peripheral initialization, calibration constants, and any boot or update logic. The exact map and programming information are defined in the MSP430F11x2 family documentation.
Where can I buy MSP430F1122IPW and what is its lead time?
The MSP430F1122IPW can be requested through the Request a Quote form on this page, where current commercial terms, quantity breaks, and delivery information should be confirmed. The verified manufacturer and distributor listings identify the exact 20-pin TSSOP device and its technical configuration. Use the quote form rather than relying on a static price or availability snapshot when planning production quantities or checking current lead time.

Data referensi kejuruteraan untuk MSP430F1122IPW — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose the MSP430F1122IPW for compact, low-power mixed-signal designs that need an 8 MHz 16-bit MSP430 core, 4 KB of Flash, 256 bytes of SRAM, a 10-bit ADC, UART, SPI, and a timer in a 20-pin TSSOP package. It is a strong fit for sensor nodes, compact instrumentation, appliance control, and battery-powered monitoring. Consider MSP430F1121IPW when its family resources satisfy the design and the exact peripheral and pin requirements are verified. Use MSP430F1101AIPW or MSP430F1101AIPWR when the alternate MSP430 resource set better matches the application, while checking pin multiplexing and firmware compatibility. The listed alternatives are same-package engineering candidates, not automatic substitutions: confirm memory, ADC, timer, communication, reset, and pin-function requirements against the manufacturer datasheets before approving a replacement.

Perbandingan dengan Gantian

Parametr Produk Ini MSP430F1121IPW MSP430F1121IPWR MSP430F1122IPWR MSP430F1101AIPW MSP430F1101AIPWR
Package 20-pin TSSOP 20-pin TSSOP 20-pin TSSOP 20-pin TSSOP 20-pin TSSOP 20-pin TSSOP
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments

Penyeberangsung Jelas

  • Integrated mixed-signal peripherals (vsMSP430F1101AIPW)
  • 16-bit MSP430 processing core (vsMSP430F1121IPW)
  • Compact 20-pin TSSOP implementation (vsMSP430F1101AIPWR)

Catatan Desain

Place the supply bypass capacitor immediately beside the MSP430F1122IPW supply pins and connect the device ground pins to the ground plane with short, low-inductance paths. The mixed-signal architecture makes supply and return routing part of measurement performance, not only digital stability. Use the recommended application circuit in the manufacturer datasheet and keep analog input traces away from high-current return paths.

Keep analog inputs, ADC-related components, and reference connections away from switching nodes and noisy digital traces. Route the analog signal toward the MCU rather than distributing it across the board, and provide a controlled ground reference for the measurement section. Because the target uses a compact 20-pin TSSOP package, verify pad geometry, pin numbering, and assembly clearances against the manufacturer package drawing before releasing the PCB.

Do not select a replacement solely because it uses a 20-pin TSSOP package. Confirm the exact MSP430 variant, 4 KB Flash requirement, 256-byte SRAM requirement, ADC characteristics, timer resources, UART/SPI availability, reset behavior, and pin multiplexing. The alternatives listed here are useful engineering candidates from the MSP430 family, but firmware and board compatibility must be validated using the individual device datasheets.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

The verified product information identifies the device and package but does not provide specific compliance statements. Confirm RoHS, REACH, lead-free, halogen-free, and automotive qualification status from the manufacturer's current product documentation or declarations.

Data disahkan pada: 2026-11-15 — data yang disahkan dan disusun semula oleh pasukan kejuruteraan komponen XAIPART

Pencarian Berhubungan

MSP430F1122IPW MSP430F1122IPW datasheet MSP430F1122IPW datasheet pdf MSP430F1122IPW pinout MSP430F1122IPW schematic MSP430F1122IPW equivalent MSP430F1122IPW replacement MSP430F1122IPW cross reference MSP430F1122IPW vs MSP430F1121IPW MSP430F1122IPW price MSP430F1122IPW stock Texas Instruments MSP430F1122IPW MSP430F1122 20 pin TSSOP pinout MSP430F1122 low power sensor application

Komponen dan Tanda berkaitan

Texas Instruments MSP430F1122IPW MSP430F1122 MSP430F1121IPW MSP430F1121IPWR MSP430F1122IPWR MSP430F1101AIPW MSP430F1101AIPWR MSP430 16-bit RISC mixed-signal microcontroller ultra-low-power microcontroller 8 MHz 4 KB Flash 256-byte SRAM 10-bit ADC integrated ADC reference data transfer controller UART SPI 16-bit timer 20-pin TSSOP surface-mount package embedded sensor node industrial instrumentation
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ