MSP430F1122IPW - 8MHz 16-Bit Mixed-Signal MCU | Texas Instruments
部品番号: MSP430F1122IPW ✓ 生産中MSP430F1122IPW 概要
A mixed-signal microcontroller combines a digital microcontroller core with analog peripherals such as an ADC and integrated reference. The MSP430F1122IPW belongs to the MSP430 family of ultra-low-power microcontrollers, using a 16-bit RISC architecture and 16-bit registers to improve code efficiency for embedded control, sensing, and measurement applications. Its integrated communication peripherals also reduce the need for separate interface devices.
The 8 MHz operating speed provides dedicated processing performance for control loops and measurement tasks. The 4 KB Flash memory supports embedded firmware, while 256 bytes of SRAM provides working memory for stack, variables, and data handling. The integrated 10-bit ADC includes a reference and data transfer controller, while the mixed-signal feature set supports applications combining digital logic with analog front ends.
The MSP430F1122IPW is suitable for low-power sensing, industrial instrumentation, appliance control, and embedded measurement systems. Its 20-pin TSSOP package makes it practical for compact PCB layouts where component count and board area are important. The integrated UART and SPI peripherals simplify connection to sensors, displays, transceivers, and other digital peripherals without requiring separate communication controllers.
Designers should pay attention to the available 4 KB Flash memory when sizing firmware, especially when combining application code, calibration data, and communication routines. The ADC, timer, and communication blocks should be assigned according to the manufacturer's pin and peripheral guidance. Decoupling and analog grounding should be planned carefully around the mixed-signal section to preserve measurement quality.
This product page combines the MSP430F1122IPW technical characteristics, package information, compatible alternatives, and practical design guidance. It is intended to help engineers identify the correct MCU for low-power embedded applications and plan a robust implementation around the manufacturer's MSP430F11x2 and MSP430F12x2 mixed-signal controller documentation.
ドロップイン代替品: MSP430F1122IPW — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
MSP430F1121IPW
✅ ドロップイン📋 参考代替品(カタログ未掲載)
MSP430F1121IPWR
✅ ドロップイン📋 参考代替品(カタログ未掲載)
MSP430F1122IPWR
✅ ドロップイン📋 参考代替品(カタログ未掲載)
MSP430F1101AIPW
✅ ドロップイン📋 参考代替品(カタログ未掲載)
MSP430F1101AIPWR
✅ ドロップイン📋 参考代替品(カタログ未掲載)
MSP430F1122IPW 最大定格&電気的特性
| Product Type | 16-bit ultra-low-power mixed-signal microcontroller |
| CPU Architecture | MSP430 16-bit RISC |
| 最大クロック周波数 | 8 MHz |
| Flash Memory | 4 KB |
| SRAM | 256 bytes |
| ADC Resolution | 10 bits |
| ADC Reference | Integrated |
| Data Transfer Controller | Integrated |
| UART | Integrated |
| SPI | Integrated |
| Timer | Built-in 16-bit timer |
| I/O Pins | 14 I/O pins |
| 電源電圧 | 2.5 V to 3.3 V |
| パッケージ | 20-pin TSSOP (0.173 inch, 4.40 mm width) |
| 実装タイプ | Surface Mount |
MSP430F1122IPW 20-pin tssop (0.173 inch, 4.40 mm width) ピン配置ガイド
MSP430F1122IPW (20-pin tssop (0.173 inch, 4.40 mm width) パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: MSP430F1122IPW.
詳細は データシート をご参照ください。
主な用途
MSP430F1122IPW の用途: 6 件s: Low-Power Industrial Sensor Node, Battery-Powered Environmental Monitor, Compact Appliance Control Board, Portable Data-Acquisition Module, Smart Sensor Interface, Embedded Instrumentation and Control.
Low-Power Industrial Sensor Node
The MSP430F1122IPW fits compact industrial sensor nodes where analog measurement and digital control must share a small, low-power MCU. Its integrated 10-bit ADC can sample a conditioned sensor signal without a separate converter, while the built-in 16-bit timer supports periodic sampling and timing tasks. The 4 KB Flash footprint is suitable for tightly scoped firmware, and UART or SPI can connect the node to a local controller. Keep analog routing away from switching nodes and validate the measurement range against the ADC and supply specifications.
おすすめ
Battery-Powered Environmental Monitor
The MSP430F1122IPW is appropriate for battery-powered environmental monitoring because its mixed-signal architecture combines an 8 MHz 16-bit processor, 10-bit ADC, timer, and communication interfaces in one device. A duty-cycled design can wake for a measurement, process the result in 256 bytes of SRAM, and return to a low-power state between samples. UART provides a simple diagnostics path, while SPI can support a digital sensor. Confirm the device's low-power mode behavior, ADC settling requirements, and supply voltage range in the datasheet.
おすすめ
Compact Appliance Control Board
The MSP430F1122IPW can serve as the central controller in a compact appliance control board where a small package, mixed-signal measurement, and serial communications are required. The 14 I/O pins support digital control functions, while the ADC can monitor a potentiometer, temperature signal, or other conditioned analog input. The 8 MHz CPU provides useful control-loop performance without requiring a larger system. The 20-pin TSSOP package reduces board area, although external level translation or protection may be needed for long harness connections.
おすすめ
Portable Data-Acquisition Module
The MSP430F1122IPW is well suited to a small data-acquisition module that must digitize several slow-changing analog signals and transfer results over a serial link. Its 10-bit ADC with integrated reference simplifies the analog front end, while the 16-bit timer can establish deterministic sampling intervals. SPI can connect to an external memory or sensor, and UART can report measurements to a host. Use the 256-byte SRAM carefully for buffers and validate acquisition timing, input impedance, and noise performance against the application bandwidth.
おすすめ
Smart Sensor Interface
The MSP430F1122IPW can act as a smart interface between analog sensors and a higher-level digital system. Its integrated ADC handles the measurement side, while UART and SPI provide flexible connectivity to a sensor, storage device, or communications module. The compact 20-pin TSSOP package helps when the interface must fit behind a sensor or inside a small enclosure. Firmware should configure the ADC, timer, and communication peripheral for the required sampling sequence, and the PCB should provide local bypassing and controlled analog grounding.
おすすめ
Embedded Instrumentation and Control
The MSP430F1122IPW is applicable to embedded instrumentation where a controller must acquire analog values, execute timing logic, and communicate with test equipment. The 8 MHz MSP430 CPU provides a 16-bit processing platform for control and measurement functions, and the integrated ADC reference reduces the external analog component count. SPI can connect to a display or storage device, while UART can provide a service interface. For laboratory or industrial environments, add appropriate protection, isolation, calibration, and grounding beyond the MCU's direct electrical requirements.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: MSP430F1122IPW — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | MSP430F1121IPW | MSP430F1121IPWR | MSP430F1122IPWR | MSP430F1101AIPW | MSP430F1101AIPWR |
|---|---|---|---|---|---|---|
| Package | 20-pin TSSOP | 20-pin TSSOP | 20-pin TSSOP | 20-pin TSSOP | 20-pin TSSOP | 20-pin TSSOP |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
主な差別化要因
- Integrated mixed-signal peripherals (vs MSP430F1101AIPW)
- 16-bit MSP430 processing core (vs MSP430F1121IPW)
- Compact 20-pin TSSOP implementation (vs MSP430F1101AIPWR)
設計ノート
Place the supply bypass capacitor immediately beside the MSP430F1122IPW supply pins and connect the device ground pins to the ground plane with short, low-inductance paths. The mixed-signal architecture makes supply and return routing part of measurement performance, not only digital stability. Use the recommended application circuit in the manufacturer datasheet and keep analog input traces away from high-current return paths.
Keep analog inputs, ADC-related components, and reference connections away from switching nodes and noisy digital traces. Route the analog signal toward the MCU rather than distributing it across the board, and provide a controlled ground reference for the measurement section. Because the target uses a compact 20-pin TSSOP package, verify pad geometry, pin numbering, and assembly clearances against the manufacturer package drawing before releasing the PCB.
Do not select a replacement solely because it uses a 20-pin TSSOP package. Confirm the exact MSP430 variant, 4 KB Flash requirement, 256-byte SRAM requirement, ADC characteristics, timer resources, UART/SPI availability, reset behavior, and pin multiplexing. The alternatives listed here are useful engineering candidates from the MSP430 family, but firmware and board compatibility must be validated using the individual device datasheets.
コンプライアンス情報
The verified product information identifies the device and package but does not provide specific compliance statements. Confirm RoHS, REACH, lead-free, halogen-free, and automotive qualification status from the manufacturer's current product documentation or declarations.