MSP430F2011IPW - 16MHz Ultra-Low-Power MCU | Texas Instruments
MPN: MSP430F2011IPW ✓ AktifMSP430F2011IPW Ringkasan
An ultra-low-power microcontroller is a semiconductor device optimized to minimize energy consumption during both active operation and standby. The MSP430 belongs to the mixed-signal MCU hierarchy, combining a RISC processor, digital peripherals, timers, serial interfaces, and analog functions on one integrated circuit. Its five low-power modes and 16-bit register architecture are intended to extend battery life in portable measurement applications while retaining straightforward embedded-control capabilities.
Key features include a 16 MHz clock, 2 KB of Flash program memory, 128 B of SRAM, ten I/O pins, one 16-bit timer, and an analog comparator. These resources support compact sensor-reading, signal-conditioning, control, and communication tasks without requiring a separate analog IC. The 14-TSSOP package is suitable for space-constrained boards, while the industrial-grade ordering option supports applications across the manufacturer-specified industrial temperature range.
The MSP430F20xx architecture uses a 16-bit RISC CPU with 16-bit registers and a five-mode low-power design. Flash memory supports firmware storage, while the small SRAM holds active variables and stack data. The integrated comparator allows thresholding or basic analog-signal analysis close to the sensing source, reducing the need for long analog traces and helping preserve signal quality in mixed-signal systems.
Typical uses include battery-powered environmental sensors, portable industrial measurement instruments, low-energy condition-monitoring nodes, compact control panels, and small embedded systems that periodically wake to process sensor information. For low-duty-cycle designs, the MCU can remain in a low-power state between measurements and use its timer and comparator to organize acquisition and threshold events.
Design around the 14-TSSOP footprint and keep sensitive analog routing away from switching activity. Confirm the operating voltage, clock configuration, pin multiplexing, and required external components in the manufacturer datasheet before layout. Firmware changes may be necessary when replacing a device with a different MSP430 family member even if the package and several headline specifications are similar.
This page combines the confirmed MSP430F2011IPW specifications with package-aware alternatives, engineering selection guidance, comparison parameters, and practical integration notes. These resources help engineers evaluate whether the device fits an ultra-low-power embedded design before committing the PCB footprint and firmware architecture.
Pilihan pengganti yang segera untuk MSP430F2011IPW — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera MSP430F2011IPW (sama faktor bentuk dan kaki) — berbeza dalam CPU Architecture, Package, ADC Resolution, Analog Comparator, Operating Temperature Range.
MSP430F1121IPW
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
MSP430G2201IPW14R
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
MSP430F2011TN
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →MSP430F2012IPW
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak DisahkanHubungi untuk harga
Lihat Datasheet →MSP430F2013IPW
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak DisahkanHubungi untuk harga
Lihat Datasheet →MSP430F2011IPW Penilaian maksimum & Ciri-ciri Elektrik
| Product Type | 16-bit ultra-low-power mixed-signal microcontroller |
| CPU Architecture | MSP430 16-bit RISC |
| Frekuensi Klock Maksimum | 16 MHz |
| Flash Memory | 2 KB |
| SRAM | 128 B |
| General-Purpose I/O Pins | 10 pins |
| Timer | 1 built-in 16-bit timer |
| Analog Comparator | 1 integrated analog comparator |
| Tegangan Pemberi Arus | 2.5 V or 3.3 V |
| Gambaran Suhu Operasi | -40 °C to +85 °C |
| Kemasan | 14-TSSOP |
| Kiraan Pin | 14 pins |
| Jenis Pemasangan | Surface mount |
| Low-Power Modes | 5 modes |
| Register Width | 16 bits |
| Programming Memory Organization | 2K × 8 bits plus 256 B |
Panduan Konfigurasi Pin MSP430F2011IPW 14-tssop
Konfigurasi pin untuk MSP430F2011IPW (14-tssop pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.
Tiada data garisan pin yang diperoleh untuk MSP430F2011IPW.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
MSP430F2011IPW patut untuk 6 aplikasis: Battery-Powered Environmental Sensors, Portable Industrial Measurement, Low-Energy Condition Monitoring, Smart Sensor Interface, Compact Process-Control Module, Battery-Powered Security Sensor.
Battery-Powered Environmental Sensors
MSP430F2011IPW fits compact environmental sensing nodes that periodically wake to acquire a signal, evaluate it, and return to a low-power state. Its 16 MHz MSP430 CPU provides enough processing capability for basic filtering and control, while 2 KB Flash holds a focused firmware image and 128 B SRAM supports active variables. The integrated analog comparator can perform threshold detection near the sensor, reducing the need to route a small analog signal across the board. Using the five low-power modes and timer-based wake events can lower average system energy, although final battery life also depends on sensor and regulator quiescent current.
Disebarkan
Portable Industrial Measurement
The MSP430F2011IPW is appropriate for handheld or portable industrial instruments that combine sensing, thresholding, and local control. Its ten I/O pins can support digital status inputs, indicators, and control outputs, while the 16-bit timer provides a dedicated timing resource for measurement intervals or pulse-related tasks. The 2 KB Flash limitation favors a focused application rather than a large graphical user interface, and the 128 B SRAM requires disciplined memory allocation. A 2.5 V or 3.3 V architecture helps align the MCU with low-voltage industrial sensors and mixed-signal front ends.
Disebarkan
Low-Energy Condition Monitoring
MSP430F2011IPW can serve as the control core in a low-energy condition-monitoring node for equipment, pipes, storage, or remote assets. The MCU can remain in one of five low-power modes between events, then use timer inputs, digital I/O, and the analog comparator to determine whether operator attention is required. The 16-bit RISC CPU and 16-bit registers simplify arithmetic tasks compared with an 8-bit controller, while the 2 KB Flash limit favors compact event classification rather than extensive data logging. Local filtering reduces traffic and energy use by sending only meaningful state changes upstream.
Disebarkan
Smart Sensor Interface
The MSP430F2011IPW is well suited to smart-signal interfaces that combine a sensor, a simple threshold function, and a digital output. Its integrated analog comparator can monitor an analog level while the MSP430 CPU handles configuration, debouncing, and state reporting. At 16 MHz, the controller has ample speed for short digital routines without requiring a high-power application processor. The 14-TSSOP package helps preserve board area in compact sensor assemblies, but ten I/O pins may constrain designs requiring several alarms, communications lines, and sensor selects simultaneously.
Disebarkan
Compact Process-Control Module
MSP430F2011IPW can implement a small process-control module when the required task is limited to analog thresholding, timing, and discrete outputs. Its timer supports deterministic periodic activity, and the comparator provides a basic input for detecting a process limit without a full external ADC. The 16-bit CPU helps with scaling and control calculations, although 2 KB Flash and 128 B SRAM impose strict code and data budgeting. A 14-TSSOP footprint simplifies compact controller layouts, and operation from 2.5 V or 3.3 V supports common embedded and industrial logic levels.
Disebarkan
Battery-Powered Security Sensor
MSP430F2011IPW can support a compact battery-powered security sensor that evaluates a digital detector or analog threshold and reports an event. Its ultra-low-power architecture is valuable in installations where battery replacement is inconvenient, and its five low-power modes permit long idle intervals between checks. The integrated comparator can supervise a slowly varying analog alarm signal, while the timer and ten I/O pins handle heartbeat timing, sensor enable, and status indication. The 2 KB Flash footprint is sufficient for a dedicated monitoring routine but not for storing extensive event history locally.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk MSP430F2011IPW — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | MSP430F1121IPW | MSP430G2201IPW14R | MSP430F2011TN | MSP430F2012IPW | MSP430F2013IPW |
|---|---|---|---|---|---|---|
| Package | 14-TSSOP | 14-TSSOP | 14-TSSOP | 14-TSSOP | 14-TSSOP | 14-TSSOP |
Penyeberangsung Jelas
- Compact mixed-signal integration (vsMSP430G2201IPW14R)
- Documented industrial ordering configuration (vsMSP430F1121IPW)
- Low-power mixed-signal resource balance (vsMSP430F2012IPW)
Catatan Desain
Estimated power budgeting should include MCU active current, the selected low-power-mode current, regulator quiescent current, and every sensor load. The 16 MHz MSP430F2011IPW can consume more energy while active than during its five low-power modes, so schedule the processor to sleep between samples. Calculate average energy from measured mode currents, wake duration, and event frequency rather than relying only on the maximum clock frequency.
Reserve the manufacturer-specified 14-TSSOP land pattern and follow the datasheet's decoupling recommendations. Place the nearest supply capacitor at the power and ground pins, keep analog comparator inputs away from fast digital edges, and provide a clean ground return for the sensing path. Confirm the exposed requirements for reset and clock configuration before routing because incorrect test or programming connections can interfere with startup.
Avoid treating a 14-TSSOP footprint match as proof of complete interchangeability. Pin multiplexing, alternate peripheral functions, timer counts, comparator channels, interrupt vectors, and low-power behavior can differ among MSP430 devices. For every replacement, build a pin-by-pin comparison table and recompile the firmware against the exact device header before releasing the PCB or production firmware.
Route comparator and sensor inputs away from clock, timer-driven, and serial output traces. Keep the analog input path short, use a stable reference or supply arrangement appropriate to the comparator input limits, and avoid sharing a high-impedance sensing node with digital multiplexing functions. When switching between low-power modes, allow the analog and reference paths to settle before taking a threshold measurement.
Maklumat Kesediaan
The MSP430F2011IPW is an industrial-temperature microcontroller rather than an automotive-qualified device. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations require confirmation from the manufacturer product documentation.