MSP430F2011IPW - 16MHz Ultra-Low-Power MCU | Texas Instruments
MPN: MSP430F2011IPW ✓ NakahandaMSP430F2011IPW Ulas
An ultra-low-power microcontroller is a semiconductor device optimized to minimize energy consumption during both active operation and standby. The MSP430 belongs to the mixed-signal MCU hierarchy, combining a RISC processor, digital peripherals, timers, serial interfaces, and analog functions on one integrated circuit. Its five low-power modes and 16-bit register architecture are intended to extend battery life in portable measurement applications while retaining straightforward embedded-control capabilities.
Key features include a 16 MHz clock, 2 KB of Flash program memory, 128 B of SRAM, ten I/O pins, one 16-bit timer, and an analog comparator. These resources support compact sensor-reading, signal-conditioning, control, and communication tasks without requiring a separate analog IC. The 14-TSSOP package is suitable for space-constrained boards, while the industrial-grade ordering option supports applications across the manufacturer-specified industrial temperature range.
The MSP430F20xx architecture uses a 16-bit RISC CPU with 16-bit registers and a five-mode low-power design. Flash memory supports firmware storage, while the small SRAM holds active variables and stack data. The integrated comparator allows thresholding or basic analog-signal analysis close to the sensing source, reducing the need for long analog traces and helping preserve signal quality in mixed-signal systems.
Typical uses include battery-powered environmental sensors, portable industrial measurement instruments, low-energy condition-monitoring nodes, compact control panels, and small embedded systems that periodically wake to process sensor information. For low-duty-cycle designs, the MCU can remain in a low-power state between measurements and use its timer and comparator to organize acquisition and threshold events.
Design around the 14-TSSOP footprint and keep sensitive analog routing away from switching activity. Confirm the operating voltage, clock configuration, pin multiplexing, and required external components in the manufacturer datasheet before layout. Firmware changes may be necessary when replacing a device with a different MSP430 family member even if the package and several headline specifications are similar.
This page combines the confirmed MSP430F2011IPW specifications with package-aware alternatives, engineering selection guidance, comparison parameters, and practical integration notes. These resources help engineers evaluate whether the device fits an ultra-low-power embedded design before committing the PCB footprint and firmware architecture.
Mga alternatibo na pwedeng ilagay na MSP430F2011IPW — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok MSP430F2011IPW (parehas na form factor at footprint) — pagkakaiba sa CPU Architecture, Package, ADC Resolution, Analog Comparator, Operating Temperature Range.
MSP430F1121IPW
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
MSP430G2201IPW14R
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
MSP430F2011TN
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →MSP430F2012IPW
✅ Drop-In ⚠️ Mga Talaan Hindi NaiwerikmoMagkontak para sa presyo
Tingnan ang Datasheet →MSP430F2013IPW
✅ Drop-In ⚠️ Mga Talaan Hindi NaiwerikmoMagkontak para sa presyo
Tingnan ang Datasheet →MSP430F2011IPW Mga Pinakamataas na Rating at Electrical Characteristics
| Product Type | 16-bit ultra-low-power mixed-signal microcontroller |
| CPU Architecture | MSP430 16-bit RISC |
| Maksimum na Taktiko ng Oras | 16 MHz |
| Flash Memory | 2 KB |
| SRAM | 128 B |
| General-Purpose I/O Pins | 10 pins |
| Timer | 1 built-in 16-bit timer |
| Analog Comparator | 1 integrated analog comparator |
| Volte ng Pagbibigay | 2.5 V or 3.3 V |
| Hanay ng Temperature na Operasyon | -40 °C to +85 °C |
| Packhaging | 14-TSSOP |
| Bilang ng Pin | 14 pins |
| Uri ng Pagpapasok | Surface mount |
| Low-Power Modes | 5 modes |
| Register Width | 16 bits |
| Programming Memory Organization | 2K × 8 bits plus 256 B |
Gabay sa Pin Configuration ng MSP430F2011IPW 14-tssop
Pin configuration para sa MSP430F2011IPW (14-tssop package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa MSP430F2011IPW.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
MSP430F2011IPW ay nararapat para sa 6 aplikasyons: Battery-Powered Environmental Sensors, Portable Industrial Measurement, Low-Energy Condition Monitoring, Smart Sensor Interface, Compact Process-Control Module, Battery-Powered Security Sensor.
Battery-Powered Environmental Sensors
MSP430F2011IPW fits compact environmental sensing nodes that periodically wake to acquire a signal, evaluate it, and return to a low-power state. Its 16 MHz MSP430 CPU provides enough processing capability for basic filtering and control, while 2 KB Flash holds a focused firmware image and 128 B SRAM supports active variables. The integrated analog comparator can perform threshold detection near the sensor, reducing the need to route a small analog signal across the board. Using the five low-power modes and timer-based wake events can lower average system energy, although final battery life also depends on sensor and regulator quiescent current.
Inirekomenda
Portable Industrial Measurement
The MSP430F2011IPW is appropriate for handheld or portable industrial instruments that combine sensing, thresholding, and local control. Its ten I/O pins can support digital status inputs, indicators, and control outputs, while the 16-bit timer provides a dedicated timing resource for measurement intervals or pulse-related tasks. The 2 KB Flash limitation favors a focused application rather than a large graphical user interface, and the 128 B SRAM requires disciplined memory allocation. A 2.5 V or 3.3 V architecture helps align the MCU with low-voltage industrial sensors and mixed-signal front ends.
Inirekomenda
Low-Energy Condition Monitoring
MSP430F2011IPW can serve as the control core in a low-energy condition-monitoring node for equipment, pipes, storage, or remote assets. The MCU can remain in one of five low-power modes between events, then use timer inputs, digital I/O, and the analog comparator to determine whether operator attention is required. The 16-bit RISC CPU and 16-bit registers simplify arithmetic tasks compared with an 8-bit controller, while the 2 KB Flash limit favors compact event classification rather than extensive data logging. Local filtering reduces traffic and energy use by sending only meaningful state changes upstream.
Inirekomenda
Smart Sensor Interface
The MSP430F2011IPW is well suited to smart-signal interfaces that combine a sensor, a simple threshold function, and a digital output. Its integrated analog comparator can monitor an analog level while the MSP430 CPU handles configuration, debouncing, and state reporting. At 16 MHz, the controller has ample speed for short digital routines without requiring a high-power application processor. The 14-TSSOP package helps preserve board area in compact sensor assemblies, but ten I/O pins may constrain designs requiring several alarms, communications lines, and sensor selects simultaneously.
Inirekomenda
Compact Process-Control Module
MSP430F2011IPW can implement a small process-control module when the required task is limited to analog thresholding, timing, and discrete outputs. Its timer supports deterministic periodic activity, and the comparator provides a basic input for detecting a process limit without a full external ADC. The 16-bit CPU helps with scaling and control calculations, although 2 KB Flash and 128 B SRAM impose strict code and data budgeting. A 14-TSSOP footprint simplifies compact controller layouts, and operation from 2.5 V or 3.3 V supports common embedded and industrial logic levels.
Inirekomenda
Battery-Powered Security Sensor
MSP430F2011IPW can support a compact battery-powered security sensor that evaluates a digital detector or analog threshold and reports an event. Its ultra-low-power architecture is valuable in installations where battery replacement is inconvenient, and its five low-power modes permit long idle intervals between checks. The integrated comparator can supervise a slowly varying analog alarm signal, while the timer and ten I/O pins handle heartbeat timing, sensor enable, and status indication. The 2 KB Flash footprint is sufficient for a dedicated monitoring routine but not for storing extensive event history locally.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for MSP430F2011IPW — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | MSP430F1121IPW | MSP430G2201IPW14R | MSP430F2011TN | MSP430F2012IPW | MSP430F2013IPW |
|---|---|---|---|---|---|---|
| Package | 14-TSSOP | 14-TSSOP | 14-TSSOP | 14-TSSOP | 14-TSSOP | 14-TSSOP |
Pangunahing mga Pagkakaiba
- Compact mixed-signal integration (kumpara saMSP430G2201IPW14R)
- Documented industrial ordering configuration (kumpara saMSP430F1121IPW)
- Low-power mixed-signal resource balance (kumpara saMSP430F2012IPW)
Talaan ng Disenyo
Estimated power budgeting should include MCU active current, the selected low-power-mode current, regulator quiescent current, and every sensor load. The 16 MHz MSP430F2011IPW can consume more energy while active than during its five low-power modes, so schedule the processor to sleep between samples. Calculate average energy from measured mode currents, wake duration, and event frequency rather than relying only on the maximum clock frequency.
Reserve the manufacturer-specified 14-TSSOP land pattern and follow the datasheet's decoupling recommendations. Place the nearest supply capacitor at the power and ground pins, keep analog comparator inputs away from fast digital edges, and provide a clean ground return for the sensing path. Confirm the exposed requirements for reset and clock configuration before routing because incorrect test or programming connections can interfere with startup.
Avoid treating a 14-TSSOP footprint match as proof of complete interchangeability. Pin multiplexing, alternate peripheral functions, timer counts, comparator channels, interrupt vectors, and low-power behavior can differ among MSP430 devices. For every replacement, build a pin-by-pin comparison table and recompile the firmware against the exact device header before releasing the PCB or production firmware.
Route comparator and sensor inputs away from clock, timer-driven, and serial output traces. Keep the analog input path short, use a stable reference or supply arrangement appropriate to the comparator input limits, and avoid sharing a high-impedance sensing node with digital multiplexing functions. When switching between low-power modes, allow the analog and reference paths to settle before taking a threshold measurement.
Impormasyon ng Pagsunod sa Kautusan
The MSP430F2011IPW is an industrial-temperature microcontroller rather than an automotive-qualified device. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations require confirmation from the manufacturer product documentation.