MSP430G2230IDR - 16MHz Mixed-Signal MCU | Texas Instruments
MPN: MSP430G2230IDR ✓ AktifMSP430G2230IDR Ringkasan
A mixed-signal microcontroller combines a digital microcontroller core with analog measurement and communication peripherals. In the MSP430 family, this integration allows a compact system to sample analog signals, process the measurements, and communicate with sensors or host equipment without requiring several separate devices. The MSP430G2230 is therefore positioned between a general-purpose embedded controller and a dedicated low-power measurement engine.
The headline capabilities are a 16 MHz maximum operating frequency, 2 KB of Flash memory, and 256 bytes of SRAM. Its 10-bit ADC supports embedded analog measurements, while SPI and I2C provide two common paths for connecting serial peripherals. Four I/O pins make the device particularly appropriate for small systems whose external interface needs remain modest. The manufacturer describes five low-power operating modes that are optimized for extended battery life in portable measurement applications.
At the architectural level, the MSP430G2230 uses a 16-bit RISC CPU with 16-bit registers. The product page highlights the architecture, register width, and low-power design as the basis for its portable-measurement positioning. The device can execute code from its internal Flash memory and retain working data in SRAM, while the integrated analog and serial peripherals reduce the need for separate support chips.
Typical applications include battery-powered sensor nodes, compact industrial measurement instruments, portable data loggers, digital thermometers, and low-power monitoring devices. SPI or I2C can connect an external sensor or transceiver, while the ADC can acquire an analog input from a resistive bridge, thermistor, or other transducer. The limited 2 KB program-memory capacity favors compact firmware with tight peripheral control.
PCB implementation requires careful attention to the 8-pin SOIC footprint, exposed pad-free thermal behavior, decoupling, and the device's low-voltage supply limits. Place the supply and ground connections directly to the relevant pins, keep analog input routing away from fast digital transitions, and confirm all operating conditions against the manufacturer datasheet before release.
This page combines the manufacturer's device overview, exact ordering information, package identification, interface details, and practical selection guidance. It also distinguishes verified device capabilities from replacement questions so engineers can assess fit, memory limits, package compatibility, and low-power operation before committing to a design.
Pilihan pengganti yang segera untuk MSP430G2230IDR — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera MSP430G2230IDR (sama faktor bentuk dan kaki) — berbeza dalam Number of I/O Pins, Package.
MSP430G2210IDR
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →MSP430G2211IDR
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif rujukan (tidak dalam katalog)
MSP430G2231IDR
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif rujukan (tidak dalam katalog)
MSP430G2333IDR
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif rujukan (tidak dalam katalog)
MSP430G2111IDR
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif rujukan (tidak dalam katalog)
MSP430G2230IDR Penilaian maksimum & Ciri-ciri Elektrik
| Product Type | Mixed-signal microcontroller |
| CPU Architecture | 16-bit RISC |
| Frekuensi Klock Maksimum | 16 MHz |
| Register Width | 16 bit |
| Program Memory Size | 2 KB Flash |
| Program Memory Organization | 2K x 8 |
| SRAM Size | 256 bytes |
| ADC Resolution | 10 bit |
| Serial Interfaces | SPI and I2C |
| Number of I/O Pins | 4 pins |
| Timer | Integrated timer |
| Low-Power Modes | 5 modes |
| Low Supply Voltage Range | 3.6 V |
| Off-Mode Current with RAM Retention | 0.1 uA |
| Kemasan | 8-pin SOIC |
| Jenis Pemasangan | Surface mount |
Panduan Konfigurasi Pin MSP430G2230IDR 8-pin soic
Konfigurasi pin untuk MSP430G2230IDR (8-pin soic pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.
Tiada data garisan pin yang diperoleh untuk MSP430G2230IDR.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
MSP430G2230IDR patut untuk 6 aplikasis: Battery-Powered Sensor Nodes, Portable Data Loggers, Digital Thermometers, Compact Industrial Measurement, Low-Power Environmental Monitoring, Embedded Control and Monitoring.
Battery-Powered Sensor Nodes
The MSP430G2230IDR fits compact battery-powered sensor nodes because its 16 MHz MSP430 core, 10-bit ADC, and five low-power modes can measure and process a sensor signal without a separate processor. SPI or I2C can connect a digital sensor, while the 2 KB Flash and 256 bytes of SRAM support deliberately small firmware. Power budget the node around actual active time, sleep duration, sensor load, and the supply current of the selected operating mode rather than treating the 16 MHz clock speed as continuous consumption.
Portable Data Loggers
For a portable data logger, the MSP430G2230IDR combines a 16-bit CPU, 256 bytes of SRAM, a timer, and serial interfaces in only eight SOIC pins. The timer can organize periodic sampling, the ADC can acquire an analog transducer signal, and SPI or I2C can transfer records to a host or memory module. Its five low-power modes are central to battery-operated logging because the controller can remain inactive between samples. Firmware and external storage capacity should be planned carefully because the controller itself offers only 2 KB of Flash.
Digital Thermometers
The MSP430G2230IDR is appropriate for a digital thermometer that converts a resistive or voltage-based sensor into a digital result. Its 10-bit ADC can acquire the analog input, the 16-bit RISC CPU can perform conversion and filtering, and I2C or SPI can update a display, host, or wireless module. The internal oscillator removes a separate clock component, while the low-power mode structure allows the thermometer to reduce consumption between readings. Sensor excitation, calibration, resolution, and error budget must be evaluated separately from the ADC's nominal 10-bit resolution.
Compact Industrial Measurement
The MSP430G2230IDR can serve as the control core of a compact industrial measurement module when the signal chain requires analog acquisition and serial connectivity but not extensive processing. The ADC handles a conditioned sensor input, the timer supports periodic conversion or control tasks, and SPI or I2C provides access to external sensors, transceivers, or configuration devices. Five low-power modes help reduce standby demand in intermittently powered instruments. For factory equipment, verify the operating-temperature limits, EMC requirements, isolation needs, and long-term availability against the manufacturer documentation before production release.
Low-Power Environmental Monitoring
The MSP430G2230IDR suits low-power environmental monitoring where a remote unit periodically samples an analog quantity and reports it through a serial link. Its internal oscillator, 10-bit ADC, timer, and low-power modes support a compact duty-cycled design, while SPI or I2C can connect temperature, humidity, gas, or pressure sensing components. The four available I/O pins favor applications where a dedicated serial sensor occupies most of the external interface budget. Weatherproofing, condensation, sensor drift, and enclosure-induced thermal effects must be handled separately from the MCU's electrical performance.
Embedded Control and Monitoring
The MSP430G2230IDR can act as a dedicated embedded controller for a small subsystem that requires local sensing, timing, and serial control. Its 16 MHz 16-bit core provides straightforward control-loop execution, while the integrated ADC, SPI, I2C, and timer reduce external component count. This is useful in an actuator controller, panel interface, or autonomous test fixture where a larger MCU would add cost or board area. The design must account for only four I/O pins, limited SRAM, and 2 KB of Flash, and should reserve interface pins according to the complete manufacturer pin-description table.
Data referensi kejuruteraan untuk MSP430G2230IDR — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini |
|---|---|
| Product Type | Mixed-signal microcontroller |
| Brand | Texas Instruments |
| Package | 8-pin SOIC |
| Maximum Clock Frequency | 16 MHz |
| Program Memory | 2 KB Flash |
| SRAM | 256 bytes |
| ADC Resolution | 10 bit |
| Serial Interfaces | SPI and I2C |
| Number of I/O Pins | 4 pins |
| Low-Power Modes | 5 modes |
Catatan Desain
Design the power budget around the MCU's active and low-power operating states rather than the 16 MHz maximum clock frequency. The manufacturer identifies a 3.6 V low-supply-voltage range and a 0.1 uA off-mode current with RAM retention. Keep analog and digital return currents controlled, place the supply bypass capacitor close to the device, and verify the final leakage budget with the sensor, pull resistors, interface transceiver, and protection components included.
Assign the PCB for an 8-pin SOIC footprint only after checking the official package drawing and pin-description table. Route the supply and ground pins with short, low-impedance paths, place decoupling capacitance at the device, and preserve the manufacturer's solder-pad and copper recommendations. The limited four-I/O footprint makes every pin assignment significant; review reset, programming, serial communication, and analog functions before routing.
Keep the ADC input path away from SPI, I2C, timer, and other fast digital routes to reduce coupling into the measurement result. Use a compact ground return for the analog source, place any input filtering close to the ADC pin, and isolate high-impedance sensor nodes from nearby switching nodes. Although the ADC resolution is 10 bit, layout noise can still affect repeatability and the useful measurement error, so validate the complete sensor and signal-conditioning path on hardware.
Do not assume that another MSP430G2xx orderable device is interchangeable. MSP430G2230QDEP has a different package, while related devices can differ in Flash, SRAM, I/O, ADC channels, and pin multiplexing. For firmware work, use the MSP430G2230IDR device definition and the exact timing and electrical limits from the manufacturer documentation. Treat the 2 KB Flash limit as a design constraint that affects drivers, libraries, diagnostics, and update routines.
Maklumat Kesediaan
The available product excerpts do not state the compliance classifications. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status in the current manufacturer documentation before procurement.