Texas Instruments

MSP430G2230IDR - 16MHz Mixed-Signal MCU | Texas Instruments

MPN: MSP430G2230IDR ✓ فعال
3.6 V Vdss 0.1 uA Id 8-pin SOIC Package 16 MHz Speed 2 KB Flash Memory
حداقل سفارش: 1 |

MSP430G2230IDR نمای کلی

The Texas Instruments MSP430G2230IDR is a mixed-signal microcontroller with a 16 MHz MSP430 CPU, 2 KB of Flash program memory, 256 bytes of SRAM, and a 10-bit ADC in an 8-pin SOIC package. It also provides SPI and I2C serial interfaces, timers, four I/O pins, and five low-power modes for compact, low-energy measurement systems.

A mixed-signal microcontroller combines a digital microcontroller core with analog measurement and communication peripherals. In the MSP430 family, this integration allows a compact system to sample analog signals, process the measurements, and communicate with sensors or host equipment without requiring several separate devices. The MSP430G2230 is therefore positioned between a general-purpose embedded controller and a dedicated low-power measurement engine.

The headline capabilities are a 16 MHz maximum operating frequency, 2 KB of Flash memory, and 256 bytes of SRAM. Its 10-bit ADC supports embedded analog measurements, while SPI and I2C provide two common paths for connecting serial peripherals. Four I/O pins make the device particularly appropriate for small systems whose external interface needs remain modest. The manufacturer describes five low-power operating modes that are optimized for extended battery life in portable measurement applications.

At the architectural level, the MSP430G2230 uses a 16-bit RISC CPU with 16-bit registers. The product page highlights the architecture, register width, and low-power design as the basis for its portable-measurement positioning. The device can execute code from its internal Flash memory and retain working data in SRAM, while the integrated analog and serial peripherals reduce the need for separate support chips.

Typical applications include battery-powered sensor nodes, compact industrial measurement instruments, portable data loggers, digital thermometers, and low-power monitoring devices. SPI or I2C can connect an external sensor or transceiver, while the ADC can acquire an analog input from a resistive bridge, thermistor, or other transducer. The limited 2 KB program-memory capacity favors compact firmware with tight peripheral control.

PCB implementation requires careful attention to the 8-pin SOIC footprint, exposed pad-free thermal behavior, decoupling, and the device's low-voltage supply limits. Place the supply and ground connections directly to the relevant pins, keep analog input routing away from fast digital transitions, and confirm all operating conditions against the manufacturer datasheet before release.

This page combines the manufacturer's device overview, exact ordering information, package identification, interface details, and practical selection guidance. It also distinguishes verified device capabilities from replacement questions so engineers can assess fit, memory limits, package compatibility, and low-power operation before committing to a design.

جایگزین‌های drop-in برای MSP430G2230IDR — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

گونه‌ها در این سری

مدل‌های هم‌سری که جایگزین مستقیم هستند برای MSP430G2230IDR (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Number of I/O Pins, Package.

Texas Instruments
Number of I/O Pins: 4
Package: 8-pin SOIC (SOIC-8 / D)
مقایسه با MSP430G2230IDR →
Texas Instruments
Number of I/O Pins: 4
Package: 8-pin SOIC (SOIC-8 / D)
مقایسه با MSP430G2230IDR →

MSP430G2210IDR

✅ جایگزین مستقیم
Texas Instruments
📦 8-SOIC
MSP430 CPU16 (16-bit RISC) · MSP430G2xx Value-Series · 16 MHz · 2 KB (2K x 8 + 256 B information memory) · 128 B · 1.8 V to 3.6 V · 220 µA at 1 MHz, 2.2 V · 0.5 µA

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

MSP430G2211IDR

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
📦 8-SOIC
Same MSP430 family and 8-SOIC package; Flash, SRAM, ADC, and serial-interface resources vary from MSP430G2230IDR

📋 جایگزین مرجع (خارج از کاتالوگ)

MSP430G2231IDR

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
📦 8-SOIC
Same MSP430 G2xx family and 8-SOIC package; memory and peripheral configuration differ, requiring datasheet and firmware review

📋 جایگزین مرجع (خارج از کاتالوگ)

MSP430G2333IDR

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
📦 8-SOIC
Same MSP430 G2xx family and 8-SOIC package; larger memory and altered peripheral resources compared with MSP430G2230IDR

📋 جایگزین مرجع (خارج از کاتالوگ)

MSP430G2111IDR

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
📦 8-SOIC
Same MSP430 family and 8-SOIC package; reduced memory and peripheral set compared with MSP430G2230IDR

📋 جایگزین مرجع (خارج از کاتالوگ)

MSP430G2230IDR حداکثر مقادیر مجاز و مشخصات الکتریکی

Product Type Mixed-signal microcontroller
CPU Architecture 16-bit RISC
حداکثر فرکانس کلاک 16 MHz
Register Width 16 bit
Program Memory Size 2 KB Flash
Program Memory Organization 2K x 8
SRAM Size 256 bytes
ADC Resolution 10 bit
Serial Interfaces SPI and I2C
Number of I/O Pins 4 pins
Timer Integrated timer
Low-Power Modes 5 modes
Low Supply Voltage Range 3.6 V
Off-Mode Current with RAM Retention 0.1 uA
بسته‌بندی 8-pin SOIC
نوع نصب Surface mount

راهنمای پیکربندی پین MSP430G2230IDR 8-pin soic

پیکربندی پین برای MSP430G2230IDR (پکیج 8-pin soic). این IC دیجیتال شامل GPIO، رابط‌های ارتباطی (UART، SPI، I2C) و پین‌های تغذیه است. برای عملکردهای جایگزین پین و گزینه‌های پیکربندی به دیتاشیت سازنده مراجعه کنید. ضروری برای طراحی سیستم‌های نهفته و چیدمان PCB.

نمودار پین‌آوت پکیج 8-pin soic برای MSP430G2230IDR

داده پین‌آوت تفصیلی موجود نیست برای MSP430G2230IDR.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

MSP430G2230IDR مناسب است برای 6 کاربردs: Battery-Powered Sensor Nodes, Portable Data Loggers, Digital Thermometers, Compact Industrial Measurement, Low-Power Environmental Monitoring, Embedded Control and Monitoring.

🧩

Battery-Powered Sensor Nodes

The MSP430G2230IDR fits compact battery-powered sensor nodes because its 16 MHz MSP430 core, 10-bit ADC, and five low-power modes can measure and process a sensor signal without a separate processor. SPI or I2C can connect a digital sensor, while the 2 KB Flash and 256 bytes of SRAM support deliberately small firmware. Power budget the node around actual active time, sleep duration, sensor load, and the supply current of the selected operating mode rather than treating the 16 MHz clock speed as continuous consumption.

📱

Portable Data Loggers

For a portable data logger, the MSP430G2230IDR combines a 16-bit CPU, 256 bytes of SRAM, a timer, and serial interfaces in only eight SOIC pins. The timer can organize periodic sampling, the ADC can acquire an analog transducer signal, and SPI or I2C can transfer records to a host or memory module. Its five low-power modes are central to battery-operated logging because the controller can remain inactive between samples. Firmware and external storage capacity should be planned carefully because the controller itself offers only 2 KB of Flash.

🌡️

Digital Thermometers

The MSP430G2230IDR is appropriate for a digital thermometer that converts a resistive or voltage-based sensor into a digital result. Its 10-bit ADC can acquire the analog input, the 16-bit RISC CPU can perform conversion and filtering, and I2C or SPI can update a display, host, or wireless module. The internal oscillator removes a separate clock component, while the low-power mode structure allows the thermometer to reduce consumption between readings. Sensor excitation, calibration, resolution, and error budget must be evaluated separately from the ADC's nominal 10-bit resolution.

🏭

Compact Industrial Measurement

The MSP430G2230IDR can serve as the control core of a compact industrial measurement module when the signal chain requires analog acquisition and serial connectivity but not extensive processing. The ADC handles a conditioned sensor input, the timer supports periodic conversion or control tasks, and SPI or I2C provides access to external sensors, transceivers, or configuration devices. Five low-power modes help reduce standby demand in intermittently powered instruments. For factory equipment, verify the operating-temperature limits, EMC requirements, isolation needs, and long-term availability against the manufacturer documentation before production release.

📡

Low-Power Environmental Monitoring

The MSP430G2230IDR suits low-power environmental monitoring where a remote unit periodically samples an analog quantity and reports it through a serial link. Its internal oscillator, 10-bit ADC, timer, and low-power modes support a compact duty-cycled design, while SPI or I2C can connect temperature, humidity, gas, or pressure sensing components. The four available I/O pins favor applications where a dedicated serial sensor occupies most of the external interface budget. Weatherproofing, condensation, sensor drift, and enclosure-induced thermal effects must be handled separately from the MCU's electrical performance.

🔧

Embedded Control and Monitoring

The MSP430G2230IDR can act as a dedicated embedded controller for a small subsystem that requires local sensing, timing, and serial control. Its 16 MHz 16-bit core provides straightforward control-loop execution, while the integrated ADC, SPI, I2C, and timer reduce external component count. This is useful in an actuator controller, panel interface, or autonomous test fixture where a larger MCU would add cost or board area. The design must account for only four I/O pins, limited SRAM, and 2 KB of Flash, and should reserve interface pins according to the complete manufacturer pin-description table.

What is the operating voltage of MSP430G2230IDR?
The MSP430G2230IDR operates from a 3.6 V low-supply-voltage range according to the Texas Instruments MSP430G2230 product information. The device also includes an internal oscillator, which supports low-power and portable measurement designs. Before applying the rail to a specific board, check the complete recommended operating conditions, absolute maximum ratings, and power-supply sequence in the manufacturer datasheet.
How much Flash and SRAM does MSP430G2230IDR have?
The MSP430G2230IDR contains 2 KB of Flash program memory and 256 bytes of SRAM according to the Texas Instruments product overview. The Flash is organized as 2K x 8, while the SRAM supports working data and stack operations. Its limited memory footprint favors compact applications and makes firmware size, interrupt usage, and library selection important design considerations.
What peripherals are integrated in MSP430G2230IDR?
The MSP430G2230IDR integrates a 10-bit ADC, SPI, I2C, a timer, four I/O pins, and an internal oscillator around its 16 MHz MSP430 CPU core. According to the Texas Instruments device overview, these peripherals support mixed-signal measurement and serial communication. The part also offers five low-power modes for portable systems that spend substantial time between active measurements.
What is the maximum clock frequency of MSP430G2230IDR?
The MSP430G2230IDR has a maximum clock frequency of 16 MHz. Its CPU is a 16-bit RISC architecture with 16-bit registers, as described by Texas Instruments. The device is optimized for portable measurement applications, so firmware should use the clock and low-power modes deliberately rather than treating maximum operating frequency as a continuous-power requirement.
Where can I download the MSP430G2230IDR datasheet?
The official MSP430G2230 datasheet and product resources are available from the Texas Instruments product page at https://www.ti.com/product/MSP430G2230. The ordering-specific page for MSP430G2230IDR is also available at https://www.ti.com/product/MSP430G2230/part-details/MSP430G2230IDR. Use the manufacturer document for the complete pin descriptions, electrical limits, timing parameters, and programming information.
Where can I find the MSP430G2230IDR pinout?
The MSP430G2230IDR is identified in distributor records as an 8-SOIC device, and its official ordering page is https://www.ti.com/product/MSP430G2230/part-details/MSP430G2230IDR. Use the package drawing and pin-description table in the manufacturer datasheet when assigning nets. The public result excerpts do not expose every pin name, so a complete pin list should not be inferred from the ordering code.
Is MSP430G2230IDR suitable for battery-powered sensor nodes?
The MSP430G2230IDR is suitable for compact battery-powered sensor nodes because it combines a 16-bit CPU, 10-bit ADC, SPI, I2C, timer, internal oscillator, and five low-power modes. Texas Instruments specifically positions the MSP430 family for extended battery life in portable measurement applications. Actual battery life depends on duty cycle, sleep duration, supply voltage, sensor load, and leakage of the complete product.
Where can I buy MSP430G2230IDR online?
Use the Request a Quote form on this page to request MSP430G2230IDR pricing, stock confirmation, and current lead time. The orderable manufacturer part is MSP430G2230IDR, and its suffix identifies the SOIC-8 reel configuration. A firm allocation should be confirmed for the quantity and date required rather than relying on a family-level availability statement.
What is the price of MSP430G2230IDR?
Current MSP430G2230IDR pricing is available through the Request a Quote form on this page. The form can return the appropriate unit-price breaks for the requested quantity and confirm packaging, stock, and lead time. Quote-based review helps prevent a family-level starting price from being mistaken for the price of the exact MSP430G2230IDR ordering code.
What is the lead time for MSP430G2230IDR?
The current lead time for MSP430G2230IDR should be confirmed through the Request a Quote form on this page. Include the required quantity, reel format, target shipment date, and whether partial shipments are acceptable. The manufacturer product page identifies MSP430G2230IDR as the specific orderable device, but it does not establish a shipment commitment for an individual project.
Is MSP430G2230IDR in stock?
Stock for MSP430G2230IDR should be confirmed through the Request a Quote form on this page. Provide the required quantity and delivery date so the response can reflect the exact orderable MPN and reel configuration. Generic MCU inventory levels are not a reliable indicator because package, quantity, and production schedules can affect allocation.
What can replace MSP430G2230IDR?
No pin-to-pin drop-in replacement for MSP430G2230IDR is established by the available cross-reference results. MSP430G2230QDEP uses a different package, and MSP430G2210IDR is a different device whose compatibility cannot be assumed merely from the shared MSP430G2xx family. A valid replacement must match the 8-pin SOIC footprint, 16 MHz speed, memory capacity, ADC, serial interfaces, pin functions, and power requirements.
Is MSP430G2210IDR the same as MSP430G2230IDR?
No. MSP430G2210IDR and MSP430G2230IDR are related MSP430G2xx devices, but they are not automatically interchangeable. The cross-reference material presents them as a comparison pair rather than confirming identical pinout, memory, or peripheral compatibility. Review the manufacturer datasheets and compare every assigned pin and electrical limit before considering MSP430G2210IDR as a replacement.
Can MSP430F112IDWR replace MSP430G2230IDR?
The available comparison identifies MSP430F112IDWR as a different device, not a verified drop-in replacement for MSP430G2230IDR. Package, pin assignment, memory, clock, and peripheral differences can prevent PCB-level substitution. Treat MSP430F112IDWR as a redesign candidate unless its manufacturer documentation proves pin compatibility with the MSP430G2230IDR 8-pin SOIC footprint.
MSP430G2230IDR vs MSP430G2230QDEP: which package should I choose?
Choose MSP430G2230IDR when the PCB requires the 8-pin SOIC package, and choose MSP430G2230QDEP when the PCB is designed for its QFN package. The two orderable devices belong to the same device family, but a package change is not a drop-in substitution. Confirm pin numbering, exposed-pad requirements, board area, and assembly process in the manufacturer documentation.
When should I choose MSP430G2230IDR instead of another MCU?
Choose MSP430G2230IDR when a compact 8-pin SOIC design needs a 16 MHz 16-bit CPU, 2 KB of Flash, 256 bytes of SRAM, a 10-bit ADC, SPI, I2C, timers, and five low-power modes. Its strengths are mixed-signal integration and low-power portable measurement. Select a different MCU when the application needs more memory, more I/O, a larger ADC, or a package already supported by a proven board design.
What are the key specifications of MSP430G2230IDR that engineers should know?
The key MSP430G2230IDR specifications are a 16 MHz 16-bit RISC core, 2 KB of Flash, 256 bytes of SRAM, a 10-bit ADC, SPI and I2C, a timer, four I/O pins, an internal oscillator, five low-power modes, and an 8-pin SOIC package. Texas Instruments describes the device as a mixed-signal microcontroller optimized for portable measurement and extended battery life.
What is the best cross-brand equivalent for MSP430G2230IDR?
No cross-brand equivalent is established as a verified drop-in replacement for MSP430G2230IDR. Cross-brand MCU substitution requires more than a similar clock rate: the 8-pin SOIC pinout, ADC inputs, serial-interface pins, timer resources, memory map, and firmware behavior must all be compatible. The available cross-reference results provide comparison tools but do not identify a qualifying cross-brand part.

داده‌های مرجع مهندسی برای MSP430G2230IDR — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose MSP430G2230IDR for a compact 8-pin SOIC design that needs a 16 MHz 16-bit mixed-signal controller with a 10-bit ADC, SPI, I2C, timers, four I/O pins, and five low-power modes. It is particularly effective for battery-powered sensor nodes, portable measurements, and small data-logging systems where code size must remain modest. MSP430G2230QDEP may be appropriate for a new QFN-based board, but it is not a drop-in replacement for an existing SOIC layout. MSP430G2210IDR and MSP430F112IDWR should be treated as redesign candidates because their package, pinout, memory, and peripheral combinations require individual review. No verified cross-brand equivalent is established for this footprint and mixed-signal feature set. Before selecting a substitute, compare pin functions, ADC channels, serial interfaces, clock requirements, memory, supply limits, programming, and firmware dependencies rather than relying on nominal clock speed or family name.

مقایسه با جایگزین‌ها

پارامتر این محصول
Product Type Mixed-signal microcontroller
Brand Texas Instruments
Package 8-pin SOIC
Maximum Clock Frequency 16 MHz
Program Memory 2 KB Flash
SRAM 256 bytes
ADC Resolution 10 bit
Serial Interfaces SPI and I2C
Number of I/O Pins 4 pins
Low-Power Modes 5 modes

یادداشت‌های طراحی

Design the power budget around the MCU's active and low-power operating states rather than the 16 MHz maximum clock frequency. The manufacturer identifies a 3.6 V low-supply-voltage range and a 0.1 uA off-mode current with RAM retention. Keep analog and digital return currents controlled, place the supply bypass capacitor close to the device, and verify the final leakage budget with the sensor, pull resistors, interface transceiver, and protection components included.

Assign the PCB for an 8-pin SOIC footprint only after checking the official package drawing and pin-description table. Route the supply and ground pins with short, low-impedance paths, place decoupling capacitance at the device, and preserve the manufacturer's solder-pad and copper recommendations. The limited four-I/O footprint makes every pin assignment significant; review reset, programming, serial communication, and analog functions before routing.

Keep the ADC input path away from SPI, I2C, timer, and other fast digital routes to reduce coupling into the measurement result. Use a compact ground return for the analog source, place any input filtering close to the ADC pin, and isolate high-impedance sensor nodes from nearby switching nodes. Although the ADC resolution is 10 bit, layout noise can still affect repeatability and the useful measurement error, so validate the complete sensor and signal-conditioning path on hardware.

Do not assume that another MSP430G2xx orderable device is interchangeable. MSP430G2230QDEP has a different package, while related devices can differ in Flash, SRAM, I/O, ADC channels, and pin multiplexing. For firmware work, use the MSP430G2230IDR device definition and the exact timing and electrical limits from the manufacturer documentation. Treat the 2 KB Flash limit as a design constraint that affects drivers, libraries, diagnostics, and update routines.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

The available product excerpts do not state the compliance classifications. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status in the current manufacturer documentation before procurement.

تاریخ تأیید داده‌ها: 2026-11-10 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

msp430g2230idr soic-8 MSP430G2230IDR datasheet MSP430G2230IDR datasheet pdf MSP430G2230IDR pinout MSP430G2230IDR specifications MSP430G2230IDR equivalent MSP430G2230IDR replacement MSP430G2230IDR vs MSP430G2230QDEP Texas Instruments MSP430G2230IDR MSP430G2230IDR price MSP430G2230IDR stock MSP430G2230IDR application circuit

قطعات و اصطلاحات مرتبط

Texas Instruments MSP430G2230IDR MSP430G2230 MSP430G2230QDEP MSP430G2210IDR MSP430F112IDWR MSP430 mixed-signal microcontroller microcontroller embedded controller 16-bit RISC CPU 10-bit ADC SPI I2C timer internal oscillator Flash memory SRAM low-power mode portable measurement sensor node data logger 8-pin SOIC surface-mount package
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ