Texas Instruments

OPA187ID - 36V Zero-Drift Precision Op Amp | Texas Instruments

MPN: OPA187ID ✓ Aktif
10 µV typical Vdss 10 mA maximum Id 8-pin SOIC (D) Package
MOQ: 1 |

OPA187ID Ringkasan

Texas Instruments OPA187ID is a single precision operational amplifier built for low-offset, low-drift measurement and signal-conditioning systems. The device provides 10 µV typical offset voltage, 0.001 µV/°C temperature drift, a 36 V maximum supply voltage, and an 8-pin SOIC package. It uses CMOS circuitry and is designed for low-power, precision analog signal chains where input offset and thermal drift must remain small over changing temperatures.

An operational amplifier is an analog building block that amplifies the voltage difference between its inverting and non-inverting inputs while providing high open-loop gain. The OPA187 belongs to the zero-drift precision operational-amplifier family, combining chopper-stabilized input-stage techniques with rail-to-rail output capability. This makes it suitable for instrumentation, sensor interfaces, current measurement, data acquisition, and test-equipment signal paths.

Key features include 10 µV typical input offset voltage, 0.001 µV/°C typical offset drift, rail-to-rail output operation, and a 36 V supply range. The device is also identified by Texas Instruments as MUX-friendly and low power. MUX-friendly operation is useful when a precision amplifier follows an analog multiplexer, where residual channel charge and switching transients can create input errors. Low power reduces system dissipation while retaining the low offset required by instrumentation applications.

The OPA187ID uses a CMOS precision architecture intended to minimize offset voltage and its temperature coefficient. Unlike a conventional bipolar precision amplifier whose offset behavior can change significantly over broad temperature ranges, the zero-drift architecture is intended to keep input-referred error nearly constant. Its rail-to-rail output allows useful output swing near the supply rails, although designers should consult the datasheet output-current and output-voltage limits before operating close to those boundaries.

Typical uses include precision sensor amplification, strain-gauge and bridge excitation measurement, low-current monitoring, industrial process-control signals, laboratory instrumentation, and high-resolution analog-to-digital converter input stages. In these applications, the 10 µV offset and 0.001 µV/°C drift help reduce stationary measurement error. The 36 V supply capability also permits operation from higher-voltage industrial rails when the signal and output-swing requirements remain within the device limits.

A critical design consideration is input-bias-current behavior at higher temperatures and the handling of source impedances. Follow the manufacturer datasheet when selecting input and output networks, bypassing supply pins, and defining the usable output range. The manufacturer also recommends limiting input current to 10 mA because excessive input current can forward-bias internal structures and cause input behavior to change.

This page combines manufacturer specifications, sourcing guidance, package information, application analysis, and verified drop-in comparison details to support faster component selection and PCB-level implementation decisions.

Pilihan pengganti yang segera untuk OPA187ID — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

OPA187IDR

✅ Masuk Drop-In
📦 8-pin SOIC (D)
Identical OPA187ID device and electrical ratings; the orderable packaging form uses tape-and-reel delivery rather than the base ordering form.

📋 Alternatif rujukan (tidak dalam katalog)

OPA187ID Penilaian maksimum & Ciri-ciri Elektrik

Amplifier Type Single zero-drift precision operational amplifier
Number of Channels 1 channel
Input Offset Voltage 10 µV typical
Input Offset Voltage Drift 0.001 µV/°C typical
Maximum Supply Voltage 36 V
Jenis Output Rail-to-rail output
Technology CMOS
Mux Friendly Yes
Gambaran Suhu Operasi -40 °C to +125 °C
Kemasan 8-pin SOIC (D)
Jenis Pemasangan Surface mount
Recommended Input Current Limit 10 mA maximum

Konfigurasi Pin OPA187ID

SOIC-8 Package Pinout Diagram SOIC-8 8-pin small outline IC, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOIC-8
Pin 1 NC — No connect per the manufacturer pin description
Pin 2 IN- — Inverting input
Pin 3 IN+ — Non-inverting input
Pin 4 V- — Negative supply connection
Pin 5 NC — No connect per the manufacturer pin description
Pin 6 OUT — Output
Pin 7 V+ — Positive supply connection
Pin 8 NC — No connect per the manufacturer pin description

Aplikasi Biasa

OPA187ID patut untuk 6 aplikasis: Strain-Gauge Bridge Amplification, Precision Current Measurement, Industrial Sensor Signal Conditioning, High-Resolution ADC Input Stage, Precision Instrumentation and Test Equipment, Low-Level Sensor Multiplexing.

🏭

Strain-Gauge Bridge Amplification

The OPA187ID is well suited to precision bridge measurement because its 10 µV typical input offset and 0.001 µV/°C typical drift limit input-referred error as temperature changes. It can serve as a difference amplifier or the precision input stage of an instrumentation amplifier for resistive bridges. The 36 V maximum supply voltage supports higher-voltage excitation or signal-chain requirements, while rail-to-rail output improves usable output range near the ADC input. Designers should confirm the amplifier's common-mode range, bias-current behavior, and output limits against the bridge excitation and full-scale sensor output.

⚡

Precision Current Measurement

OPA187ID can amplify the small voltage produced by a shunt or current sensor where offset and thermal drift determine measurement accuracy. Its 10 µV typical input offset and 0.001 µV/°C typical drift are valuable when resolving microvolt-level signals, and the MUX-friendly characteristic supports designs that sample multiple current channels. The 8-pin SOIC package simplifies conventional analog routing, while the 36 V rating permits operation from an industrial supply. Verify input bias current and common-mode limits before choosing shunt resistance or sensor technology.

🏭

Industrial Sensor Signal Conditioning

The OPA187ID fits low-level industrial sensor conditioning where long cable runs and temperature changes can create errors smaller than the signal itself. Its zero-drift architecture targets offset stability rather than simply minimizing broadband noise, making it appropriate for temperature, pressure, position, and resistance sensors. Rail-to-rail output provides useful headroom for driving an ADC, and the 36 V maximum supply supports higher-voltage industrial rails. Add input protection against surge and common-mode events rather than relying on amplifier inputs to absorb field-sourced energy.

📟

High-Resolution ADC Input Stage

OPA187ID can form the final voltage-gain stage before a high-resolution ADC when DC offset and drift would otherwise consume meaningful code space. Its 10 µV typical offset and 0.001 µV/°C typical drift are especially useful for slow, high-resolution measurements, while rail-to-rail output can increase the usable ADC input span. Place the amplifier close to the ADC when possible to reduce noise pickup, and confirm settling time and output-swing limits against the ADC sampling rate and acquisition window.

🖥️

Precision Instrumentation and Test Equipment

The OPA187ID is appropriate for laboratory and industrial instrumentation that must preserve small DC signals through amplification and measurement. Its zero-drift characteristics reduce calibration sensitivity to ambient temperature, while the MUX-friendly construction can simplify switched-input measurement systems. The 8-pin SOIC format is compatible with conventional instrument-board layouts, and the 36 V supply rating offers design flexibility. Engineers should evaluate noise density, settling behavior, input bias current, and overload behavior as part of the complete signal-chain budget.

🧩

Low-Level Sensor Multiplexing

OPA187ID fits a multiplexed measurement front end because it is specifically identified as MUX-friendly and maintains very low offset drift. The amplifier can condition one selected sensor output at a time, helping preserve repeatability across channels. Rail-to-rail output leaves more of the available supply span for the selected signal, while the compact 8-pin SOIC package supports straightforward routing. The design must still account for mux charge injection, settling after channel selection, source impedance, and input bias current, particularly when the sensor has high impedance.

What is the OPA187ID?
The OPA187ID is a single-channel, low-power, zero-drift precision operational amplifier from Texas Instruments. It offers 10 µV typical input offset voltage, 0.001 µV/°C typical offset drift, rail-to-rail output operation, a maximum supply voltage of 36 V, and an 8-pin SOIC package. According to the Texas Instruments OPA187 product page and manufacturer datasheet, it is optimized for precision instrumentation, sensor interfaces, and multiplexed analog signal chains.
Where can I download the OPA187ID datasheet PDF?
The official OPA187ID datasheet PDF is available from Texas Instruments at https://www.ti.com/lit/ds/symlink/opa187.pdf. The document contains the recommended operating conditions, electrical characteristics, pin configuration, application information, and ordering information for the OPA187 family. Use the pin-description table and ordering table in the manufacturer datasheet when assigning PCB connections and confirming the exact OPA187ID package suffix.
What are the key specifications of OPA187ID that engineers should know?
The OPA187ID combines a 10 µV typical input offset with 0.001 µV/°C typical offset drift in an 8-pin SOIC package. According to the Texas Instruments product page, it also supports operation up to 36 V, uses CMOS circuitry, provides rail-to-rail output, is MUX-friendly, and is designed for low-power operation. These characteristics make it particularly useful for bridge sensors, precision current measurement, process-control signals, and ADC input conditioning.
What is the OPA187ID pinout?
The OPA187ID is packaged in an 8-pin SOIC and uses the standard single-op-amp signal arrangement, with non-inverting input, inverting input, positive supply, negative supply, output, and the remaining positions designated by the manufacturer pin table. The official ordering page confirms an 8-pin SOIC package. Use the Texas Instruments datasheet pin diagram when routing the PCB because exposed or no-connect assignments must follow that drawing exactly.
Where can I buy OPA187ID and how do I request a quote?
The OPA187ID can be requested through the Request a Quote form on this XAIPART product page. The form allows buyers to specify quantity, target packaging, delivery requirements, and project needs without relying on a static price table. Current commercial terms should be confirmed through that form because market availability and production volume can change, while the exact MPN and package suffix remain important for receiving the correct device.
What is the current price of OPA187ID?
The current commercial price for OPA187ID should be requested through the Request a Quote form on this page. The submitted quantity and required delivery schedule determine the applicable quotation, and static unit prices can become stale as component supply conditions change. Buyers should identify the complete OPA187ID ordering code when requesting a quote so the quotation matches the 8-pin SOIC device rather than another package or reel variant.
What is the lead time for OPA187ID?
The current OPA187ID lead time and minimum order quantity should be confirmed with the Request a Quote form on this page. Lead time can vary with order volume, package form, shipment destination, and component availability, so it should not be inferred from general marketplace listings. Include the required delivery date and annual usage in the request to obtain a production-suitable schedule.
Is OPA187ID in stock?
Current OPA187ID inventory should be checked through the Request a Quote form on this page. The form is the appropriate channel for confirming stock, allocation, and shipment timing for the exact 8-pin SOIC ordering code. Because inventory changes rapidly, treat any listing status as transient rather than a guaranteed production allocation, and state your required schedule when requesting confirmation.
OPA187ID vs OPA188ID - which is better for precision measurement?
The OPA187ID is the zero-drift choice when offset stability is the primary requirement because the manufacturer specifies 10 µV typical offset and 0.001 µV/°C typical drift. The OPA188ID is a related low-noise amplifier rather than a zero-drift model, so its offset and temperature-coefficient behavior must be checked separately. For a precision DC measurement with slow or static signals, the OPA187ID generally aligns more closely with the target architecture.
Is OPA187ID suitable for multiplexed sensor signals?
Yes, the OPA187ID is suitable for multiplexed sensor signals because Texas Instruments identifies it as MUX-friendly. Its precision offset specification helps reduce channel-dependent errors after analog switching, while its rail-to-rail output supports a broad output range. Designers should still account for mux charge injection, settling time, source impedance, and the amplifier's input-current limits when defining the measurement system.
When should I choose OPA187ID over a conventional precision op amp?
Choose the OPA187ID when the measurement is dominated by offset voltage or offset drift and the signal does not require the noise characteristics of a conventional low-noise precision amplifier. Its 10 µV typical offset and 0.001 µV/°C typical drift are particularly valuable in bridge sensors, temperature probes, and slow high-resolution measurements. Confirm AC performance, settling behavior, output swing, and input bias current against the manufacturer datasheet before finalizing the amplifier choice.
What can replace OPA187ID?
The OPA187IDR is a traceable drop-in alternative because it is the manufacturer's reel-packaged ordering form of the same OPA187ID device in the same 8-pin SOIC package. A functional substitute must also match the 10 µV-class offset, 0.001 µV/°C-class drift, supply range, output architecture, and pin behavior. No second-source cross-brand equivalent was established from the available cross-reference results, so another part should not be called drop-in without engineering verification.
What is the best drop-in replacement for OPA187ID?
The OPA187IDR is the best confirmed drop-in choice among the located records because it preserves the OPA187ID function, electrical class, and 8-pin SOIC footprint while changing the orderable packaging form. The cross-reference results do not establish five distinct pin-compatible devices, and a tape-and-reel packaging change does not create a meaningful second-source option. For risk reduction, evaluate a different amplifier family only after checking offset, drift, noise, bias current, common-mode range, and stability.
Is OPA187ID suitable for a 24 V industrial control signal?
The OPA187ID is suitable for many 24 V industrial control-signal front ends because its maximum supply voltage is 36 V, leaving headroom above a 24 V rail. The amplifier can support a 2.5 V, 3.3 V, 5 V, or other midscale reference within the supply range for current-to-voltage conversion. Confirm the allowed common-mode and output ranges, input-current limit, transients, and protection network before connecting field wiring.
How should OPA187ID input current be limited?
Texas Instruments recommends limiting input current to 10 mA because excessive current can flow as input voltage increases and can forward-bias internal structures. If the source cannot sink that current, the input may begin sourcing current and alter the effective positive-supply behavior. Keep normal input currents well below the recommended limit and add input clamping or series resistance where transients, fault conditions, or floating sources could exceed the safe operating area.
How should OPA187ID be used in a precision bridge-sensor circuit?
Use the OPA187ID in a low-noise instrumentation-amplifier or difference stage where its 10 µV typical offset and 0.001 µV/°C typical drift reduce input-referred error. Keep sensor and feedback resistances suitable for the amplifier's input-current behavior, place compensation and bias networks according to the manufacturer guidance, and verify common-mode range across the full sensor output. The rail-to-rail output is useful when the required ADC input range approaches a supply rail.

Data referensi kejuruteraan untuk OPA187ID — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose OPA187ID when your design needs low input offset and very low temperature drift rather than merely low broadband noise. Its 10 µV typical offset and 0.001 µV/°C typical drift are especially useful for bridge sensors, temperature probes, precision current measurement, and slow high-resolution ADC channels. The MUX-friendly characteristic also makes it suitable for switched sensor inputs. OPA187IDR is the same electrical device in a tape-and-reel ordering form, so it can be used when that packaging option fits the assembly process. No distinct second-source amplifier was established from the available cross-reference results. Consequently, do not select an unrelated precision op amp as a drop-in replacement without checking offset, drift, input bias current, common-mode range, output swing, gain-bandwidth product, noise, stability, and SOIC pin behavior.

Perbandingan dengan Gantian

Parametr Produk Ini OPA187IDR
Package 8-pin SOIC (D) 8-pin SOIC (D) - same
Brand Texas Instruments Texas Instruments
Amplifier Type Single zero-drift precision operational amplifier Single zero-drift precision operational amplifier
Number of Channels 1 channel 1 channel
Input Offset Voltage 10 µV typical 10 µV typical
Offset Voltage Drift 0.001 µV/°C typical 0.001 µV/°C typical
Maximum Supply Voltage 36 V 36 V
Output Architecture Rail-to-rail output Rail-to-rail output
Multiplexer Compatibility MUX-friendly MUX-friendly
Technology CMOS CMOS
Operating Temperature Range -40 °C to +125 °C -40 °C to +125 °C
Orderable Packaging Form OPA187ID base ordering code OPA187IDR tape-and-reel ordering code

Penyeberangsung Jelas

  • Exceptionally low temperature-dependent offset drift (vsOPA187IDR)
  • Precision offset suitable for slow high-resolution signals (vsOPA187IDR)
  • Rail-to-rail operation with a 36 V maximum supply (vsOPA187IDR)
  • MUX-friendly precision architecture (vsOPA187IDR)

Catatan Desain

Keep the OPA187ID input current below the manufacturer's recommended 10 mA limit. Excessive input current can forward-bias internal structures, causing the input to source current and alter the apparent positive-supply behavior. Use series input resistance, source impedance, and appropriate clamping when the source can experience transients, floating conditions, or fault voltages. This limit is especially important when the amplifier follows protection networks whose leakage may rise at temperature.

Route the OPA187ID as a precision analog amplifier rather than as a general-purpose high-speed signal path. Keep the feedback network close to pins 2 and 6, provide a direct return from the ground connection to the analog ground reference, and place input and output paths away from switching nodes and high-current traces. Verify that the chosen SOIC layout has no exposed-pad requirement. The manufacturer pin diagram remains the controlling reference for every connection.

Account for amplifier offset, input bias current, mux charge injection, and settling after channel selection as separate error sources. A 10 µV offset specification alone does not establish total accuracy. For high-impedance sensors, calculate the bias-current-induced voltage error at the source impedance and confirm that the selected feedback resistors do not create unacceptable Johnson noise or introduce excessive parasitic capacitance. Bench-test mux transitions at the intended sampling rate.

The 36 V maximum supply rating is an absolute operating constraint, not a recommended operating point. Include transient margin for industrial supply variation and protection against ESD or wiring surges. Decouple the supply pins close to the device according to the manufacturer application guidance, and confirm the amplifier's common-mode and output ranges at the actual supply voltage. The 8-pin SOIC has no specified exposed thermal pad in the listed package configuration.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

The manufacturer product page and ordering information identify the device as an 8-pin SOIC with an operating range of -40 °C to +125 °C. Separate environmental and material-compliance declarations were not present in the retrieved records, so these fields remain unknown.

Pencarian Berhubungan

OPA187ID datasheet OPA187ID pinout OPA187ID datasheet pdf OPA187ID equivalent OPA187ID replacement OPA187ID cross reference OPA187ID vs OPA188ID OPA187ID zero drift op amp OPA187ID 36V amplifier OPA187ID 8-SOIC OPA187ID sensor amplifier OPA187ID price OPA187ID stock Texas Instruments OPA187ID

Komponen dan Tanda berkaitan

Texas Instruments OPA187ID OPA187IDR OPA188ID zero-drift operational amplifier precision operational amplifier analog signal conditioner input offset voltage offset voltage drift rail-to-rail output MUX-friendly amplifier CMOS operational amplifier 8-pin SOIC SOIC package family surface-mount package 36 V operational amplifier bridge sensor strain-gauge measurement precision current measurement industrial sensor interface high-resolution ADC Texas Instruments OPA187 datasheet
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ