P1014NSE5FFA - QorIQ P1014 800MHz e500v2 MPU 425-TEPBGA | NXP
MPN: P1014NSE5FFA ✓ AktifP1014NSE5FFA Ringkasan
A communications processor is a specialized system-on-chip that combines one or more CPU cores with integrated peripherals and on-chip accelerators designed for networking infrastructure. The QorIQ family evolved from Freescale's (now NXP) PowerQUICC line, adding high-speed interfaces (USB, SATA, GbE, PCIe) and DDR3 memory controllers while keeping power consumption low. The P1014 sits in the entry-tier QorIQ P1 family alongside the P1010, balancing compute headroom with low power for fanless designs.
Key specifications include a 32-bit e500v2 core at 800 MHz, integrated SEC 4.x crypto engine, three 10/100/1000 Ethernet MACs (one RGMII + two SGMII), three PCIe Gen2 controllers, one USB 2.0 controller, one SATA 2.0 controller, and a 32-bit DDR3 memory controller with ECC. Memory interfaces include a 16-bit local bus and IFC for NAND/NOR flash. The 425-TEPBGA is a 19 mm x 19 mm fine-pitch wire-bond BGA designed for multilayer PCB stacks with low-impedance power delivery.
Typical applications include industrial gateways, factory-floor protocol converters, smart-grid energy routers, small-cell base stations, network-attached storage controllers, and IoT edge appliances requiring deterministic networking with hardware crypto offload. The SEC engine accelerates IPsec, SSL/TLS, and MACsec without burdening the e500 core.
Design considerations include careful power-rail sequencing (core and I/O domains are separate), thermal management through the package's center thermal balls, and impedance-controlled PCB stackup for DDR3, RGMII, and SGMII signaling. A board-level reference design from NXP's QorIQ development platform is recommended as a starting layout.
Pilihan pengganti yang segera untuk P1014NSE5FFA — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera P1014NSE5FFA (sama faktor bentuk dan kaki) — berbeza dalam USB, SATA, Operating Temperature, Package, Memory Controller.
P1014NSE5HFB
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
P1014NSN5HFA
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →P1014NSE5FFA Penilaian maksimum & Ciri-ciri Elektrik
| Processor Type | PowerPC e500v2 |
| Core Count | 1 |
| Core Architecture | 32-Bit Power Architecture |
| Core Frequency | 800 MHz |
| Suhu Operasi | 0C to +105C |
| Kemasan / Case | 425-TEPBGA |
| Jenis Pemasangan | Surface Mount |
| Packaging | Tray |
| Status RoHS | RoHS Compliant |
| Lead Free Status | Lead Free |
| Ethernet MACs | 3 (1x RGMII + 2x SGMII) |
| PCIe Controllers | 3 x PCIe Gen2 |
| USB | 1 x USB 2.0 |
| SATA | 1 x SATA 2.0 |
| Memory Controller | 32-bit DDR3 with ECC |
| Security Engine | SEC 4.x (IPsec/SSL/MACsec acceleration) |
Panduan Konfigurasi Pin P1014NSE5FFA 425-tepbga
Konfigurasi pin untuk P1014NSE5FFA (425-tepbga pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.
Tiada data garisan pin yang diperoleh untuk P1014NSE5FFA.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
P1014NSE5FFA patut untuk 6 aplikasis: Industrial Gateway & Protocol Converter, Smart Grid Energy Router, Small-Cell Base Station Controller, Network-Attached Storage (NAS) Controller, IoT Edge Appliance with Secure VPN, Industrial Firewall / UTM Appliance.
Industrial Gateway & Protocol Converter
The P1014NSE5FFA's 800 MHz e500v2 core, integrated SEC 4.x crypto engine, and trio of GbE MACs make it a strong fit for industrial gateways bridging Modbus/TCP, EtherNet/IP, and PROFINET traffic at the network edge. The 0C to 105C industrial temperature grade plus lead-free TEPBGA package support fanless DIN-rail enclosure designs in factory automation. Designers typically pair the P1014 with external RGMII PHYs and DDR3 with ECC to deliver deterministic, secure protocol translation.
Disebarkan
Smart Grid Energy Router
The P1014NSE5FFA's hardware-accelerated IPsec/SSL/MACsec engine plus GbE and PCIe interfaces suit smart-grid energy routers that aggregate AMI data over VPN tunnels. The SEC engine offloads AES-GCM and RSA operations so the e500v2 core can dedicate cycles to metering and protocol parsing. DDR3 with ECC adds the SEU resilience required for utility substation deployments, while the 0C-105C junction range covers outdoor cabinets.
Disebarkan
Small-Cell Base Station Controller
The P1014NSE5FFA's PCIe Gen2 lanes and SGMII Ethernet MACs enable a compact small-cell base-station controller board where the QorIQ handles L2 switching, S1/X2 signalling, and OAM while offloading crypto to the SEC engine. The 800 MHz e500v2 core runs Linux with the QorIQ SDK and supports the real-time scheduling needed for radio-resource management. SGMII allows direct attachment to small-cell RF front-end modules.
Disebarkan
Network-Attached Storage (NAS) Controller
The P1014NSE5FFA's integrated SATA 2.0 host plus PCIe Gen2 and GbE MACs make it a fit for entry-level NAS controllers managing one or two SATA drives over a GbE link. The e500v2 core runs a lightweight NAS OS and the SEC engine accelerates SMB/Kerberos handshakes for authenticated file shares. DDR3 with ECC protects against bit-flips in always-on storage service scenarios.
Disebarkan
IoT Edge Appliance with Secure VPN
The P1014NSE5FFA's SEC 4.x engine and PCIe-based Wi-Fi/5G modem attach points suit IoT edge appliances that aggregate sensor data and forward it securely over IPsec VPN to the cloud. The e500v2 core handles MQTT/CoAP protocol translation while the SEC engine encrypts payloads. USB 2.0 supports an external cellular modem and SATA can host local logging SSDs.
Disebarkan
Industrial Firewall / UTM Appliance
The P1014NSE5FFA's GbE MACs and SEC engine deliver IPsec/SSL/MACsec acceleration in a unified-threat-management appliance for OT networks. Deep-packet inspection runs on the e500v2 core while the SEC engine handles AES-NI-equivalent bulk crypto, sustaining multi-Gbps tunnel throughput. The PCIe lane can host an expansion NIC for additional ports, and the 0C-105C grade supports DIN-rail mounting.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk P1014NSE5FFA — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | P1014NSE5HFB | P1014NSN5HFA |
|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 425-TEPBGA | 425-TEPBGA - same | 425-TEPBGA - same |
| Core Architecture | PowerPC e500v2 | PowerPC e500v2 | PowerPC e500v2 |
| Core Count | 1 | 1 | 1 |
| Operating Temperature | 0C to +105C | 0C to +105C | 0C to +105C |
| RoHS Status | Compliant | Compliant | Compliant |
| Security Engine | SEC 4.x | SEC 4.x | SEC 4.x |
| Ethernet MACs | 3 (1x RGMII + 2x SGMII) | 3 (1x RGMII + 2x SGMII) | 3 (1x RGMII + 2x SGMII) |
Penyeberangsung Jelas
- Highest-frequency QorIQ P1014 bin with full SEC 4.x engine (vsP1014NSN5HFA)
- Same package as P1014NSE5HFB enabling drop-in re-spin (vsP1014NSE5HFB)
- Integrated 3-port GbE + 3-port PCIe + SATA + USB on-chip (vsDiscrete MPU + companion Ethernet switch)
Catatan Desain
Estimated: The 425-TEPBGA at 19 mm body size typically uses a 0.8 mm ball pitch with 4-6 layer PCB stackup; the design must allocate at least 4 inner layers for ground and power planes under the package. Escape routing on the outer layers should use via-in-pad only with filled-and-capped vias to meet BGA reliability requirements. Matched-length DDR3 traces must keep delta within 25 mil and the impedance-controlled to 50 ohm single-ended.
The P1014 requires multiple voltage rails (core ~1.0 V, DDR3 I/O, SERDES analog, I/O) that must be sequenced per the QorIQ P1014 reference manual. Use a dedicated power-rail sequencer such as TPS3823 and verify that POR stays asserted until all rails are stable. Decoupling should place 0.1 uF X7R capacitors on every power pin within 2 mm of the BGA ball.
Estimated: At an ambient of 85C with 800 MHz CPU at full load, the 425-TEPBGA can dissipate ~3-5 W depending on peripheral activity; thermal balls at the package center should be soldered to a copper thermal pad with thermal vias to an inner heat-spreading plane. For fanless DIN-rail designs, plan at least 25 mm^2 of 2 oz copper directly under the thermal balls to keep junction below 105C.
Do not assume the P1014NSE5FFA and P1010NSE5HHB share the same ball map - verify against NXP's official pin-compatibility matrix before layout reuse. SERDES reference-clock jitter must stay under the limits in the QorIQ P1014 datasheet, otherwise PCIe/SGMII link training fails. Always validate DDR3 write-leveling across temperature corners before production release.
Maklumat Kesediaan
RoHS compliant and lead-free per NXP product page and DigiKey listing. Halogen-free and conflict-minerals status not stated in the verified web data.
