NXP Semiconductors

PCA9665D - Fm+ Parallel to I2C Controller | NXP | 20-SO

MPN: PCA9665D ✗ Akhir Hayat
2.5 V to 3.6 V Vdss 100 uA Id 20-pin SOIC Package
MOQ: 1 |

PCA9665D Ringkasan

The NXP PCA9665D is an Fm+ parallel-bus to I2C-bus controller packaged in a 20-pin SOIC. It is designed for systems in which a parallel processor or programmable logic device must communicate with I2C peripherals. The controller provides a structured bridge between a parallel host interface and the serial I2C bus, reducing the firmware and wiring burden associated with bit-level I2C transactions. Its nominal supply range is 2.5 V to 3.3 V, and the device consumes approximately 100 uA of supply current.

An I2C bus controller is an interface IC that converts commands and data from a parallel or processor-specific bus into transactions on an I2C serial bus. The I2C interface uses SDA for bidirectional data and SCL for the clock, while the parallel side communicates with a host using a dedicated address and data register arrangement. This device family is useful when a controller, display subsystem, communications equipment, or embedded logic platform needs to access low-speed I2C peripherals without using an I2C-capable host controller.

The PCA9665D is identified by NXP as an Fm+ parallel bus to I2C-bus controller. Its 20-pin SOIC package supports conventional surface-mount assembly and provides a practical upgrade path for designs that require a dedicated parallel-to-I2C bridge. The 2.5 V to 3.3 V operating range is compatible with low-voltage digital systems, while the approximately 100 uA supply current is important in equipment where the interface must not create an unnecessary standing load. Detailed clock, addressing, electrical, and timing limits should be taken from the manufacturer datasheet.

Typical uses include industrial control panels, programmable-logic-based peripherals, test systems, communication modules, display-control boards, and embedded equipment that exposes an I2C bus through a parallel host interface. The PCA9665D is especially useful when the existing host processor does not provide a suitable I2C peripheral. In such designs, the parallel interface can be connected to external logic or a processor bus, while the I2C side reaches sensors, EEPROMs, expanders, and other compatible devices.

When laying out a replacement design, verify the exact package variant, supply voltage, address behavior, clock timing, and signal levels against the NXP datasheet before production release. The D suffix denotes the 20-pin SO option, while other NXP order codes may use different package or shipping arrangements. Check the mechanical drawing and pin table for the selected ordering code rather than assuming every PCA9665-family order code has the same footprint.

Pilihan pengganti yang segera untuk PCA9665D — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

PCA9665A

✅ Masuk Drop-In
📦 20-pin SOIC
Same NXP parallel-to-I2C controller family and 20-pin SO option; electrical and timing differences require datasheet comparison, with no confirmed parameter delta stated.

📋 Alternatif rujukan (tidak dalam katalog)

PCA9665ADP

✅ Masuk Drop-In
📦 20-pin SOIC
Same PCA9665 controller family and 20-pin SO package class; device revision, temperature range, and ordering options may differ, with no confirmed numerical delta stated.

📋 Alternatif rujukan (tidak dalam katalog)

PCA9665D Spesifikasi

Device Type Fm+ parallel bus to I2C-bus controller
Controller Type I2C bus controller
Parallel Interface 8-bit parallel bus
Serial Interface I2C bus
Supply Voltage Range 2.5 V to 3.6 V
Nominal Operating Supply 2.5 V or 3.3 V
Arus Pemberi Arus 100 uA
Kemasan 20-pin SOIC
Package Dimensions 7.50 mm width
Jenis Pemasangan Surface mount
Product Lifecycle No longer manufactured

Panduan Konfigurasi Pin PCA9665D 7.50 mm width

Konfigurasi pin untuk PCA9665D (7.50 mm width pakai). Penomeran pin, fungsi, dan garis bentuk koneksi ditakrifkan dalam dokumen pengeluar. Rujuk dokumen untuk kebentuk dan pedoman pengasman.

Garis bentuk pengecah pakai 7.50 mm width untuk PCA9665D

Tiada data garisan pin yang diperoleh untuk PCA9665D.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

PCA9665D patut untuk 6 aplikasis: Programmable Logic to I2C Peripheral Bridge, Industrial Control Panel Interface, Test and Measurement Control Module, Communications Equipment Peripheral Hub, Display and Audio Control Subsystem, Embedded Sensor and EEPROM Hub.

🔧

Programmable Logic to I2C Peripheral Bridge

The NXP PCA9665D fits programmable-logic systems that need to control I2C sensors, EEPROMs, or expanders without implementing serial timing in logic fabric. The parallel side accepts host commands while the controller handles I2C-bus transactions, simplifying the architecture and reducing host firmware involvement. Its 2.5 V to 3.6 V supply range fits common 3.3 V logic systems, while approximately 100 uA supply current keeps the standing load moderate. Because PCA9665D is no longer manufactured, an existing board can use it for controlled maintenance, but a new design should validate the PCA9665A or PCA9665ADP option against the required package, timing, and register behavior.

🏭

Industrial Control Panel Interface

PCA9665D can connect a parallel control section to I2C-managed display drivers, configuration EEPROMs, sensors, or I/O expanders in an industrial panel. The 20-pin SOIC format supports conventional surface-mount assembly, and the 2.5 V to 3.3 V nominal operation suits low-voltage control electronics. Its approximately 100 uA supply current is useful where the interface remains active continuously. For new production, engineers should treat the obsolete status as a supply-risk issue and confirm that any replacement preserves the pin arrangement, command timing, clock limit, and electrical limits documented by NXP.

📟

Test and Measurement Control Module

The PCA9665D is suitable for test modules that coordinate I2C peripherals through a parallel logic interface. It can bridge a tester controller or programmable instrument toward sensors, memories, and low-speed measurement components while operating from a 2.5 V to 3.3 V supply. The approximately 100 uA supply current avoids making the interface a major standing-power contributor. A replacement design must preserve timing margin at the intended I2C clock rate and should account for the D revision's no-longer-manufactured lifecycle through controlled sourcing and full board-level validation.

🌐

Communications Equipment Peripheral Hub

In communications hardware, PCA9665D can provide a dedicated path from a parallel system bus to I2C configuration or monitoring devices. This architecture is useful when a communication processor lacks spare I2C resources or when multiple board-level functions require a controlled bus bridge. The 2.5 V to 3.6 V operating range supports conventional digital rails, and the approximately 100 uA supply current suits embedded equipment. For production continuity, engineers should compare a currently obtainable NXP-family part for identical pin behavior, signal levels, address handling, and timing before declaring it a direct replacement.

📺

Display and Audio Control Subsystem

PCA9665D can serve low-speed control peripherals in a display or audio subsystem, including I2C display controllers, volume devices, interface expanders, and configuration memories. A parallel host section can issue commands without tying the subsystem's main processor to the I2C protocol. The 20-pin SOIC package is appropriate for compact controller boards, while the 2.5 V to 3.3 V operating range aligns with many mixed-signal subsystems. Designers should verify logic thresholds and timing carefully during any replacement, particularly for display update paths where bus latency or an address-map difference could affect operation.

🧩

Embedded Sensor and EEPROM Hub

The PCA9665D can connect a parallel embedded subsystem to I2C sensors, EEPROMs, and low-power peripheral ICs. Its approximately 100 uA supply current is valuable in compact equipment where the interface must coexist with always-on monitoring functions. The 2.5 V to 3.6 V supply range supports both 2.5 V and 3.3 V designs, subject to the detailed electrical requirements in the manufacturer datasheet. Since NXP lists PCA9665D as no longer manufactured, existing deployments may use controlled retained inventory, while new boards should evaluate PCA9665A or PCA9665ADP and verify pin, clock, and register compatibility.

Ringkasan Produk Disebarkan

PCA9665A Same-family NXP parallel-to-I2C controller candidate Dipergunakan di: Programmable Logic to I2C Peripheral Bridge, Industrial Control Panel Interface, Test and Measurement Control Module, Communications Equipment Peripheral Hub, Display and Audio Control Subsystem, Embedded Sensor and EEPROM Hub PCA9665ADP Same-family NXP controller candidate Dipergunakan di: Programmable Logic to I2C Peripheral Bridge, Industrial Control Panel Interface, Test and Measurement Control Module, Communications Equipment Peripheral Hub, Display and Audio Control Subsystem, Embedded Sensor and EEPROM Hub
What is the NXP PCA9665D?
The NXP PCA9665D is an Fm+ parallel-bus to I2C-bus controller in a 20-pin SOIC package. According to the NXP product information, it is intended to provide a hardware interface between a parallel host bus and an I2C peripheral bus. This makes it useful when the principal processor does not have an I2C controller or when a programmable-logic subsystem must communicate with I2C devices.
What is the operating voltage of PCA9665D?
The PCA9665D operates from a 2.5 V to 3.6 V supply, with nominal use at 2.5 V or 3.3 V. The DigChip specification record for PCA9665D,118 lists the same 2.3 V to 3.6 V description range, so system-level designs should use the manufacturer limits and timing data for final sign-off. The interface is therefore intended primarily for low-voltage digital equipment.
Where can I download the PCA9665D datasheet PDF?
The official PCA9665D datasheet is available through the NXP product page at https://www.nxp.com/part/PCA9665D. That page identifies the component as an Fm+ parallel bus to I2C-bus controller and provides the manufacturer data sheet under the PCA9665 and PCA9665A document family. Use the NXP copy for authoritative pin assignments, electrical limits, timing, and package drawings.
Where is the PCA9665D pinout located?
The PCA9665D pinout is located in the pin-description table and package drawing in the NXP manufacturer datasheet linked from the official product page. The device is offered in a 20-pin SOIC, but numbering and signal names should be taken directly from the datasheet because related PCA9665 order codes can use different package options. The pin table should govern every PCB connection.
Is PCA9665D still manufactured by NXP?
No, NXP lists PCA9665D as no longer manufactured on its official product page. That status should be treated as obsolete or end-of-life rather than an active-production choice. For a new design, engineers should review NXP's shipping discontinuance and replacement information, while existing users should confirm availability and long-term sourcing through the Request a Quote form on this page.
Where can I buy PCA9665D online?
The Request a Quote form on this page is the appropriate route for current PCA9665D sourcing, package-variant identification, and lead-time confirmation for NXP's discontinued catalog part. Because the manufacturer lists PCA9665D as no longer manufactured, inventory can be limited and may represent retained stock rather than new production. Request the exact ordering code, quantity, and documentation needed before committing a design.
What is the price of PCA9665D?
Current PCA9665D commercial terms are requested through the Request a Quote form on this page rather than stated as a static figure. The component is no longer manufactured by NXP, so pricing can vary with available inventory, package suffix, quantity, and whether the material is new, factory-retained, or previously installed. Submit the required part and quantity for a current quotation.
What is the lead time for PCA9665D?
The current PCA9665D lead time must be confirmed through the Request a Quote form on this page. NXP lists the device as no longer manufactured, so a normal active-part production schedule may not apply. For an existing product, provide the annual usage, exact suffix, and quality requirements when requesting the quotation so the supplier can identify suitable inventory and its delivery schedule.
Is PCA9665D in stock?
PCA9665D stock status should be confirmed through the Request a Quote form on this page. NXP marks the product as no longer manufactured, meaning any supply is likely constrained and should not be interpreted as a new-production guarantee. Specify the exact package suffix, target quantity, date code requirements, and whether factory-retained material is acceptable.
What can replace PCA9665D?
PCA9665A is the closest documented same-family NXP option because the official product page groups PCA9665 and PCA9665A under the same data-sheet family, but it should be treated as a design-review candidate rather than an automatic drop-in replacement. Confirm package, pin assignments, electrical limits, timing, and register behavior before substitution. Use the Request a Quote form to identify currently obtainable NXP-family configurations.
Is PCA9665A the same as PCA9665D?
No, PCA9665A and PCA9665D are related NXP devices, but related product-family status does not prove that they are pin-for-pin interchangeable. The official NXP page places both devices under the PCA9665 and PCA9665A data-sheet family. Compare the exact package drawing, pin table, supply limits, timing, command set, and I2C behavior before deciding whether the A revision can replace the D version.
What is the best NXP equivalent for PCA9665D?
PCA9665A is the leading NXP-family equivalent to investigate for PCA9665D because both are documented under the same NXP data-sheet family. It is not automatically a drop-in replacement until its package and pin configuration are confirmed against the D revision. No independently verified cross-brand drop-in equivalent was identified, so a redesign may be required if a same-footprint part cannot be validated.
When should I choose PCA9665D over another I2C controller?
Choose PCA9665D when an existing 8-bit parallel system must reach I2C peripherals and a dedicated bridge is preferable to adding or multiplexing a host I2C controller. Its 2.5 V to 3.6 V operating range suits conventional low-voltage digital logic, and its approximately 100 uA supply current is suitable for modest embedded systems. Because the part is no longer manufactured, choose it primarily for controlled replacement and legacy-product maintenance.
Is PCA9665D suitable for a programmable-logic design?
PCA9665D can fit a programmable-logic design when the logic must operate an I2C peripheral bus through a parallel interface. The Fm+ parallel-to-I2C function allows external logic to present commands and data without implementing I2C timing in programmable logic. The design must still account for the D revision's exact pinout, electrical characteristics, address setup, clock-rate limit, and the manufacturer-specified external components.
What are the key specifications of PCA9665D that engineers should know?
The key PCA9665D specifications are its Fm+ parallel-bus to I2C-bus controller function, 2.5 V to 3.6 V supply range, approximately 100 uA supply current, and 20-pin SOIC package. NXP identifies the component as no longer manufactured. Before schematic release, engineers should confirm the maximum bus clock, addressing range, timing, pin assignments, and all absolute maximum ratings in the manufacturer datasheet.

Data referensi kejuruteraan untuk PCA9665D — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose PCA9665D for maintenance or replication of an existing design when a parallel host must communicate with I2C peripherals and the 20-pin SOIC footprint, 2.5 V to 3.6 V supply range, and approximately 100 uA operating current already meet the design requirements. Because NXP lists the part as no longer manufactured, use controlled sourcing through the Request a Quote form and plan for lifecycle risk. Evaluate PCA9665A first for a same-family redesign, then verify its package, pinout, electrical limits, timing, and command behavior. Consider PCA9665ADP when its ordering and qualification attributes fit the application. Do not assume that either related part is a drop-in replacement without a complete datasheet comparison. No verified cross-brand, same-footprint equivalent was identified, so a new design should allow for redesign if the NXP-family options cannot be sourced or validated.

Perbandingan dengan Gantian

Parametr Produk Ini PCA9665A PCA9665ADP
Device Function Fm+ parallel bus to I2C-bus controller Parallel-to-I2C controller in the PCA9665 family PCA9665-family parallel-to-I2C controller
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors
Package 20-pin SOIC 20-pin SOIC 20-pin SOIC
Mounting Type Surface mount Surface mount Surface mount

Penyeberangsung Jelas

  • Dedicated parallel-to-I2C controller function (vsPCA9665A)
  • Low standby consumption for an interface bridge (vsPCA9665ADP)
  • Established 20-pin SOIC footprint for legacy maintenance (vsPCA9665A)

Catatan Desain

Do not treat PCA9665, PCA9665A, and other related order codes as automatically interchangeable. NXP groups the PCA9665 and PCA9665A devices under one data-sheet family, but revision behavior, temperature grade, and ordering options can differ. Before substitution, compare the exact pin table, package drawing, supply limits, I2C clock timing, address configuration, command registers, and reset requirements. For a legacy repair, preserving the original footprint and avoiding changes to the parallel host timing are the safest priorities.

Lay out the PCA9665D as a standard 20-pin SOIC device and route the I2C SDA and SCL signals as a compact, controlled bus. Keep the parallel-side traces away from the serial interface when possible to reduce coupling into sensitive edges. Confirm whether the selected design requires pull-up resistors on SDA and SCL, use the values and capacitance limits specified by NXP, and avoid long stubs that increase capacitive loading and signal-integrity risk.

Design the interface supply around the manufacturer's 2.5 V to 3.6 V range and the approximately 100 uA supply-current specification. Place local supply decoupling close to the device and keep the return path short, but do not assume the operating current remains at 100 uA under every bus state because dynamic activity and external loads can affect the total demand. Review the complete electrical characteristics and absolute maximum ratings before setting voltage tolerances or adding downstream loading.

The PCA9665D's I2C timing margin depends on bus capacitance, clock rate, pull-up strength, and the behavior of connected peripherals. Calculate the effective bus capacitance and verify rise times at the intended I2C frequency rather than copying a nominal clock limit from another member of the family. Keep SCL and SDA routing symmetrical where practical, minimize stub lengths, and test the slowest and fastest peripheral operating conditions on the completed board.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

NXP's official product page confirms the product identity and no-longer-manufactured lifecycle status but does not provide extractable compliance declarations in the cited material. Compliance fields remain unknown rather than being inferred.

Pencarian Berhubungan

PCA9665D datasheet PCA9665D datasheet pdf PCA9665D pinout PCA9665D specifications PCA9665D operating voltage PCA9665D 20-SO package PCA9665D equivalent PCA9665D replacement PCA9665D vs PCA9665A NXP PCA9665D PCA9665D application circuit PCA9665D price PCA9665D stock PCA9665D obsolete replacement

Komponen dan Tanda berkaitan

NXP Semiconductors PCA9665D PCA9665A PCA9665ADP PCA9665 Fm+ parallel bus to I2C-bus controller I2C bus controller parallel bus controller I2C SDA SCL 8-bit parallel bus interface controller I2C bus parallel interface serial interface host interface 2.5 V to 3.6 V 100 uA supply current 20-pin SOIC SOIC package surface-mount assembly programmable logic industrial control test and measurement
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ