PCM1861DBTR - 2-Channel 192kHz Audio ADC | Texas Instruments
MPN: PCM1861DBTR ✓ AktifPCM1861DBTR Ringkasan
An audio ADC is a mixed-signal semiconductor that converts left- and right-channel analog audio into digital PCM data for processing, storage, transmission, or playback. Its functional chain typically includes an analog input stage, programmable gain amplifier, delta-sigma modulator, digital decimation filter, and serial audio interface. The PCM1861 integrates these functions into one device, reducing the need for a separate external programmable-gain amplifier and simplifying mixed-signal board design.
The primary features include 110 dB signal-to-noise performance, 2-channel audio conversion, 24-bit resolution, and operation up to 192 kHz. Its hardware-controlled architecture allows system-level operating conditions to be managed through external control signals instead of relying entirely on serial commands. An integrated PGA provides analog gain control close to the input source, which can improve signal utilization before conversion and reduce sensitivity to noise introduced by long input paths.
The universal front end supports multiple input configurations and is intended to accommodate common consumer, communications, and industrial audio signals. A 3.3 V single-supply architecture simplifies power planning in portable and embedded systems. I2C and SPI interfaces allow the converter to communicate with a host processor while supporting board-level control, configuration, and digital audio data transfer. The specified -40°C to +125°C temperature range supports operation across consumer, industrial, and extended-temperature equipment.
Typical uses include USB and wireless audio accessories, Bluetooth speaker systems, voice-processing equipment, industrial monitoring terminals, consumer audio converters, and multichannel recording front ends where two-channel conversion is sufficient. The 30-pin TSSOP package also supports compact board layouts, although careful decoupling and analog-layout practices remain essential for preserving converter performance.
For implementation, place the analog inputs and their supporting components close to the converter, keep digital clock and data traces away from sensitive input nodes, and use the supply and grounding arrangement recommended in the manufacturer datasheet. Confirm all clock, filter, interface, and input-mode settings before enabling the device because incorrect configuration can alter channel routing, gain behavior, or data format.
This product page combines the manufacturer’s key device characteristics with practical application guidance, interface and packaging details, replacement considerations, and engineering notes intended to shorten design-in and review time.
Pilihan pengganti yang segera untuk PCM1861DBTR — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
PCM1860DBTR
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
PCM1861DBTR Penilaian maksimum & Ciri-ciri Elektrik
| Converter Type | 2-channel audio ADC |
| Pemecahkatan | 24 bit |
| Maximum Sampling Rate | 192 kHz |
| Signal-to-Noise Ratio | 110 dB |
| Architecture | Hardware-controlled |
| Input Stage | Universal front end with integrated PGA |
| Tegangan Pemberi Arus | 3.3 V single supply |
| Digital Interface | I2C and SPI |
| Kemasan | 30-pin TSSOP (DBT) |
| Jenis Pemasangan | Surface mount |
| Gambaran Suhu Operasi | -40°C to +125°C |
| Channel Count | 2 channels |
| Programmable Gain Amplifier | Integrated |
Panduan Konfigurasi Pin PCM1861DBTR 30-pin tssop (dbt)
Konfigurasi pin untuk PCM1861DBTR (30-pin tssop (dbt) pakai). Komponen analog ini mempunyai pin masukan, keluaran, dan kuasa. Rujuk dokumen pengeluar untuk konfigurasi pengecualian, pemulihan, dan pin aktifkan. Ideal untuk pengawasan isyarat dan litar pengukur.
Tiada data garisan pin yang diperoleh untuk PCM1861DBTR.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
PCM1861DBTR patut untuk 6 aplikasis: USB Audio Converter, Wireless Speaker Front End, Voice Processing Terminal, Industrial Audio Monitor, High-Resolution Audio Interface, Compact Consumer Audio Converter.
USB Audio Converter
The PCM1861DBTR fits a two-channel USB audio front end when the design needs 24-bit conversion up to 192 kHz without a separate programmable-gain amplifier. Its integrated PGA places gain adjustment close to the analog input, while the 110 dB conversion-performance target supports high-fidelity playback or monitoring. The 3.3 V single-supply architecture simplifies USB audio power design, and I2C configuration plus SPI data transfer suit a dedicated audio controller. The primary design check is host timing: configure the supported sample-rate and clock relationships, then verify data framing, latency, and synchronization against the USB streaming architecture.
Disebarkan
Wireless Speaker Front End
PCM1861DBTR provides the analog-to-digital conversion stage for a wireless speaker or networked speaker that accepts left- and right-channel line-level audio. The integrated PGA can accommodate source-level variation without adding a separate gain-control stage, while the universal front end supports common single-ended audio arrangements. Its 3.3 V supply requirement is useful for portable and compact designs, and the 192 kHz maximum rate provides headroom for high-resolution source material. Interface timing must be coordinated with the wireless codec, particularly if audio is streamed continuously and the converter clock cannot be derived from the source.
Disebarkan
Voice Processing Terminal
The PCM1861DBTR is suitable for voice-capture terminals that digitize stereo or dual-microphone channels before speech enhancement, recognition, or recording. The 24-bit converter and 110 dB performance target help preserve low-level signal detail, while the integrated PGA reduces the complexity of analog gain conditioning. Hardware control allows operating states to be coordinated with a system controller, and the 3.3 V single supply simplifies mixed-signal power planning. For microphone designs, use the input configuration recommended in the datasheet and verify whether the application requires single-ended or differential routing to avoid unnecessary gain and noise penalties.
Disebarkan
Industrial Audio Monitor
PCM1861DBTR can digitize two analog audio channels in an industrial monitoring terminal, condition-control enclosure, or test-equipment front end. Its -40°C to +125°C operating range supports extended-temperature environments, while the integrated PGA adapts the converter to varying line-level inputs. The universal front end reduces the number of separate analog functions required around the ADC, and I2C/SPI connectivity supports controlled configuration in embedded systems. In installations with long cables or noisy machinery, place protection and filtering ahead of the inputs, maintain the recommended analog layout, and isolate digital clock lines from sensitive audio traces.
Disebarkan
High-Resolution Audio Interface
PCM1861DBTR supports a high-resolution stereo audio interface requiring 24-bit data and operation as high as 192 kHz. The 110 dB performance target is useful for consumer listening equipment, studio-oriented accessories, and premium playback products where converter noise can affect perceived performance. The integrated PGA allows source scaling before conversion, and the 3.3 V supply supports compact mixed-signal boards. The design must pay close attention to supported clock modes, digital-filter configuration, output word length, and channel mapping. Those settings determine whether the host receives the intended left/right data at every supported sampling rate.
Disebarkan
Compact Consumer Audio Converter
The PCM1861DBTR fits a compact consumer audio converter requiring two-channel digital capture from analog line inputs. Hardware control can simplify coordination with buttons, indicators, and system modes, while the integrated PGA reduces external analog-component count. Its 30-pin TSSOP package supports conventional surface-mount assembly, and operation from a single 3.3 V rail helps fit small enclosures powered by USB or other low-voltage sources. Production designs should verify the supported input ranges, configure the digital filter appropriately for the target bandwidth, and maintain separation between the analog input section and SPI clock lines to avoid coupling conversion noise into the measured signal.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk PCM1861DBTR — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | PCM1860DBTR |
|---|---|---|
| Package | 30-pin TSSOP (DBT) | 30-pin TSSOP (DBT) |
| Brand | Texas Instruments | Texas Instruments |
| Channel Count | 2 channels | 2 channels |
| Resolution | 24 bit | 24 bit |
| Maximum Sampling Rate | 192 kHz | 192 kHz |
| Signal-to-Noise Ratio | 110 dB | 110 dB |
| Control Method | Hardware controlled | Software controlled |
| Supply Voltage | 3.3 V single supply | 3.3 V single supply |
| Programmable Gain Amplifier | Integrated | Integrated |
| Host Interfaces | I2C and SPI | I2C and SPI |
Penyeberangsung Jelas
- Hardware-controlled system architecture (vsPCM1860DBTR)
- Integrated high-performance stereo conversion (vsPCM1860DBTR)
- Universal front end with integrated PGA (vsPCM1860DBTR)
Catatan Desain
Route analog input traces as short, direct paths and place input filtering or protection components close to the corresponding converter pins. Keep the SPI clock and data traces away from the audio inputs, especially when the converter and digital host share a board. Use a continuous ground reference beneath the analog section and follow the land pattern and thermal-pad guidance in the PCM1861 datasheet for the selected 30-pin TSSOP package.
Use the recommended 3.3 V supply-decoupling network and place it adjacent to the converter's supply and ground pins. Decoupling capacitors should have short ground paths, and the supply trace should have sufficient copper area without creating unnecessary loop inductance. Because converter performance depends on clean analog power, avoid sharing narrow supply branches between the PCM1861DBTR and switching circuitry unless filtering is explicitly designed into the rail.
Do not substitute PCM1860DBTR solely because it has the same TSSOP package and similar headline specifications. Its software-control arrangement may require different host procedures and pin treatment. Before replacement, compare analog input assignments, clock requirements, control pins, serial timing, power-up behavior, filter configuration, and software initialization. A footprint match does not by itself guarantee system compatibility.
Determine the required master-clock and serial-interface timing before finalizing the PCB. Configure the converter's sampling mode, digital filter, data format, and channel mapping to match the receiving controller. Use controlled-impedance digital routing where appropriate, provide a continuous return path beneath clock traces, and keep connector or switching-regulator return currents from crossing the sensitive analog-input region.
Maklumat Kesediaan
Use the manufacturer product page and current material-declaration records to determine the applicable environmental and substance compliance status for the exact orderable MPN.