Texas Instruments

PCM1861DBTR - 2-Channel 192kHz Audio ADC | Texas Instruments

부품 번호: PCM1861DBTR ✓ 활성
3.3 V single supply Vdss 30-pin TSSOP (DBT) Package
MOQ: 1 |

PCM1861DBTR 개요

The Texas Instruments PCM1861DBTR is a 2-channel, 24-bit audio analog-to-digital converter with a maximum sampling rate of 192 kHz, hardware-controlled operation, and a 30-pin TSSOP package. It accepts a single 3.3 V supply and combines an integrated programmable-gain amplifier with a universal audio front end, making it suitable for compact, high-fidelity audio products. The converter is designed for applications requiring 110 dB dynamic-range performance and flexible I2C or SPI host connectivity.

An audio ADC is a mixed-signal semiconductor that converts left- and right-channel analog audio into digital PCM data for processing, storage, transmission, or playback. Its functional chain typically includes an analog input stage, programmable gain amplifier, delta-sigma modulator, digital decimation filter, and serial audio interface. The PCM1861 integrates these functions into one device, reducing the need for a separate external programmable-gain amplifier and simplifying mixed-signal board design.

The primary features include 110 dB signal-to-noise performance, 2-channel audio conversion, 24-bit resolution, and operation up to 192 kHz. Its hardware-controlled architecture allows system-level operating conditions to be managed through external control signals instead of relying entirely on serial commands. An integrated PGA provides analog gain control close to the input source, which can improve signal utilization before conversion and reduce sensitivity to noise introduced by long input paths.

The universal front end supports multiple input configurations and is intended to accommodate common consumer, communications, and industrial audio signals. A 3.3 V single-supply architecture simplifies power planning in portable and embedded systems. I2C and SPI interfaces allow the converter to communicate with a host processor while supporting board-level control, configuration, and digital audio data transfer. The specified -40°C to +125°C temperature range supports operation across consumer, industrial, and extended-temperature equipment.

Typical uses include USB and wireless audio accessories, Bluetooth speaker systems, voice-processing equipment, industrial monitoring terminals, consumer audio converters, and multichannel recording front ends where two-channel conversion is sufficient. The 30-pin TSSOP package also supports compact board layouts, although careful decoupling and analog-layout practices remain essential for preserving converter performance.

For implementation, place the analog inputs and their supporting components close to the converter, keep digital clock and data traces away from sensitive input nodes, and use the supply and grounding arrangement recommended in the manufacturer datasheet. Confirm all clock, filter, interface, and input-mode settings before enabling the device because incorrect configuration can alter channel routing, gain behavior, or data format.

This product page combines the manufacturer’s key device characteristics with practical application guidance, interface and packaging details, replacement considerations, and engineering notes intended to shorten design-in and review time.

드롭인 대체품: PCM1861DBTR — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

PCM1860DBTR

✅ 드롭인
📦 30-pin TSSOP (DBT)
PCM1860DBTR uses software control rather than the PCM1861DBTR hardware-control arrangement; both retain 2 channels, 24-bit resolution, 110 dB class performance, up to 192 kHz sampling, and the 30-pin TSSOP package.

📋 참조 대체품 (카탈로그에 없음)

PCM1861DBTR 최대 정격 & 전기적 특성

Converter Type 2-channel audio ADC
분해능 24 bit
Maximum Sampling Rate 192 kHz
Signal-to-Noise Ratio 110 dB
Architecture Hardware-controlled
Input Stage Universal front end with integrated PGA
공급 전압 3.3 V single supply
Digital Interface I2C and SPI
패키지 30-pin TSSOP (DBT)
실장 유형 Surface mount
동작 온도 범위 -40°C to +125°C
Channel Count 2 channels
Programmable Gain Amplifier Integrated

PCM1861DBTR 30-pin tssop (dbt) 핀 구성 가이드

PCM1861DBTR(30-pin tssop (dbt) 패키지)의 핀 구성입니다. 이 아날로그 부품에는 입력, 출력, 전원 공급 핀이 있습니다. 오프셋 널, 보상, 인에이블 핀 구성은 제조사 데이터시트를 참조하십시오. 신호 컨디셔닝 및 증폭기 회로에 이상적입니다.

PCM1861DBTR의 30-pin tssop (dbt) 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: PCM1861DBTR.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

PCM1861DBTR 적합 용도: 6 애플리케이션s: USB Audio Converter, Wireless Speaker Front End, Voice Processing Terminal, Industrial Audio Monitor, High-Resolution Audio Interface, Compact Consumer Audio Converter.

🔊

USB Audio Converter

The PCM1861DBTR fits a two-channel USB audio front end when the design needs 24-bit conversion up to 192 kHz without a separate programmable-gain amplifier. Its integrated PGA places gain adjustment close to the analog input, while the 110 dB conversion-performance target supports high-fidelity playback or monitoring. The 3.3 V single-supply architecture simplifies USB audio power design, and I2C configuration plus SPI data transfer suit a dedicated audio controller. The primary design check is host timing: configure the supported sample-rate and clock relationships, then verify data framing, latency, and synchronization against the USB streaming architecture.

📱

Wireless Speaker Front End

PCM1861DBTR provides the analog-to-digital conversion stage for a wireless speaker or networked speaker that accepts left- and right-channel line-level audio. The integrated PGA can accommodate source-level variation without adding a separate gain-control stage, while the universal front end supports common single-ended audio arrangements. Its 3.3 V supply requirement is useful for portable and compact designs, and the 192 kHz maximum rate provides headroom for high-resolution source material. Interface timing must be coordinated with the wireless codec, particularly if audio is streamed continuously and the converter clock cannot be derived from the source.

🧩

Voice Processing Terminal

The PCM1861DBTR is suitable for voice-capture terminals that digitize stereo or dual-microphone channels before speech enhancement, recognition, or recording. The 24-bit converter and 110 dB performance target help preserve low-level signal detail, while the integrated PGA reduces the complexity of analog gain conditioning. Hardware control allows operating states to be coordinated with a system controller, and the 3.3 V single supply simplifies mixed-signal power planning. For microphone designs, use the input configuration recommended in the datasheet and verify whether the application requires single-ended or differential routing to avoid unnecessary gain and noise penalties.

🏭

Industrial Audio Monitor

PCM1861DBTR can digitize two analog audio channels in an industrial monitoring terminal, condition-control enclosure, or test-equipment front end. Its -40°C to +125°C operating range supports extended-temperature environments, while the integrated PGA adapts the converter to varying line-level inputs. The universal front end reduces the number of separate analog functions required around the ADC, and I2C/SPI connectivity supports controlled configuration in embedded systems. In installations with long cables or noisy machinery, place protection and filtering ahead of the inputs, maintain the recommended analog layout, and isolate digital clock lines from sensitive audio traces.

🎧

High-Resolution Audio Interface

PCM1861DBTR supports a high-resolution stereo audio interface requiring 24-bit data and operation as high as 192 kHz. The 110 dB performance target is useful for consumer listening equipment, studio-oriented accessories, and premium playback products where converter noise can affect perceived performance. The integrated PGA allows source scaling before conversion, and the 3.3 V supply supports compact mixed-signal boards. The design must pay close attention to supported clock modes, digital-filter configuration, output word length, and channel mapping. Those settings determine whether the host receives the intended left/right data at every supported sampling rate.

🔧

Compact Consumer Audio Converter

The PCM1861DBTR fits a compact consumer audio converter requiring two-channel digital capture from analog line inputs. Hardware control can simplify coordination with buttons, indicators, and system modes, while the integrated PGA reduces external analog-component count. Its 30-pin TSSOP package supports conventional surface-mount assembly, and operation from a single 3.3 V rail helps fit small enclosures powered by USB or other low-voltage sources. Production designs should verify the supported input ranges, configure the digital filter appropriately for the target bandwidth, and maintain separation between the analog input section and SPI clock lines to avoid coupling conversion noise into the measured signal.

What is the PCM1861DBTR?
The PCM1861DBTR is a 2-channel, 24-bit audio ADC from Texas Instruments that converts analog stereo audio into digital data at rates up to 192 kHz. According to the Texas Instruments product page, it provides 110 dB dynamic-range performance, hardware-controlled operation, an integrated programmable-gain amplifier, and a universal front end in a 30-pin TSSOP package.
What are the key specifications of PCM1861DBTR that engineers should know?
The key PCM1861DBTR specifications are 2-channel conversion, 24-bit resolution, operation up to 192 kHz, 110 dB signal-to-noise performance, a 3.3 V single supply, and integrated PGA functionality. Texas Instruments describes the device as a hardware-controlled universal-front-end audio ADC with I2C and SPI interfaces, housed in a 30-pin TSSOP package.
Where can I download the PCM1861DBTR datasheet PDF?
The official PCM1861 documentation is available from the Texas Instruments PCM1861 product page at https://www.ti.com/product/PCM1861. The page provides the manufacturer datasheet, ordering information, quality data, application material, and the PCM1861DBTR part details. Use the manufacturer copy for pin assignments, electrical limits, filter settings, and reference-circuit requirements.
Where is the PCM1861DBTR pinout located?
The PCM1861DBTR pinout is documented in the pin-configuration tables and package drawings in the Texas Instruments PCM1861 datasheet. Because the device uses a 30-pin TSSOP package, use that diagram directly for PCB land-pattern assignment. In particular, verify analog inputs, supply pins, ground pins, clock connections, control inputs, and I2C or SPI signals before routing the board.
What interfaces does PCM1861DBTR support?
The PCM1861DBTR supports I2C and SPI for communication with a host controller. The I2C path is used for configuration and control, while the serial audio interface carries converted channel data according to the selected operating configuration. Texas Instruments lists both interface options in its PCM1861 product information and documents the required clocking and mode settings in the datasheet.
Can PCM1861DBTR operate from a single 3.3 V supply?
Yes, the PCM1861DBTR supports single-supply operation at 3.3 V. This simplifies analog and digital rail planning in compact audio products because the converter does not require a separate 5 V analog supply. The supply-decoupling network and grounding arrangement should still follow the manufacturer datasheet to preserve noise and dynamic-range performance.
What is the role of the integrated PGA in PCM1861DBTR?
The integrated programmable-gain amplifier adjusts the analog signal level before conversion, allowing the ADC to use its full input range with a wider variety of source amplitudes. Because gain control is performed near the front end, it can reduce the need for external amplification and shorten sensitive analog paths. The available gain modes and their effect on input range are defined by the PCM1861 datasheet.
What applications are suitable for PCM1861DBTR?
The PCM1861DBTR suits stereo audio conversion in USB accessories, wireless speakers, voice-processing equipment, industrial monitoring systems, consumer audio products, and compact recording front ends. Its combination of 2 channels, 24-bit resolution, up to 192 kHz sampling, and an integrated PGA is useful when a design needs high-quality conversion without a separate programmable-gain amplifier.
PCM1861DBTR vs PCM1860DBTR: which one should be selected?
PCM1861DBTR is the hardware-controlled member of the family, while PCM1860DBTR provides a different control approach. Both are positioned as 2-channel, 110 dB, 192 kHz-class audio ADCs, so selection depends on whether the host system requires hardware control or the alternative device's software-control method. Review the interface and pin-function tables for both devices before treating either as a replacement.
When should I choose PCM1861DBTR over a software-controlled audio ADC?
Choose PCM1861DBTR when the system benefits from hardware-controlled operating states, a local integrated PGA, and a compact 2-channel converter. This architecture can simplify designs in which control signals are handled directly by surrounding hardware. For a system whose control software is the dominant architecture, compare the command overhead and pin requirements of software-controlled alternatives before making the final choice.
Is PCM1861DBTR suitable for USB audio and wireless speaker designs?
Yes, PCM1861DBTR is suitable for USB audio and wireless-speaker front ends that require two-channel conversion. Its 24-bit resolution, 192 kHz maximum rate, 110 dB performance target, and integrated PGA provide the core conversion function, while I2C configuration and SPI data transfer suit embedded audio controllers. Interface timing and converter latency should be checked against the host USB or wireless codec requirements.
What is the best drop-in replacement for PCM1861DBTR?
PCM1860DBTR is the closest same-package family candidate identified for evaluation, but it uses a different control approach and should not be treated as an automatic replacement. Confirm that the external control signals, serial interface behavior, pin functions, register requirements, and clocking are interchangeable with the PCM1861DBTR. A firmware and schematic review is required before substitution.
Can PCM1861DBTR replace PCM1808PWRG4 in an existing design?
PCM1861DBTR should not be assumed to replace PCM1808PWRG4 without a complete footprint, interface, and performance review. The two devices belong to different audio-converter families and use different packages and control arrangements. Reuse is possible only if the original PCB footprint, power rails, clocking, analog connections, and host interface can be redesigned around the PCM1861DBTR.
What is a cross-brand equivalent for PCM1861DBTR?
A cross-brand equivalent should be selected only when it uses the same 30-pin TSSOP footprint and reproduces the required clock, control, serial-interface, analog-input, and power behavior. Analog resolution and sample-rate similarity alone do not establish drop-in compatibility. Compare the manufacturer pin descriptions and digital-interface timing, then preserve a footprint-compatible footprint and verify the digital interface in hardware.
Where can I buy PCM1861DBTR and check current availability?
Use the Request a Quote form on this page to request PCM1861DBTR availability, current lead time, order quantity, and delivery options. The quote request keeps commercial terms tied to the exact PCM1861DBTR MPN and avoids publishing a stale stock statement. Include your target quantity, packaging preference, production schedule, and destination country when submitting the request.
What is the current price and lead time for PCM1861DBTR?
The current commercial terms for PCM1861DBTR are available through the Request a Quote form on this page. Submit the required quantity, packaging preference, production schedule, and shipping destination to receive a current quote and lead-time response for the exact MPN. This avoids attaching a fixed price to inventory that may change with quantity or market conditions.
Is PCM1861DBTR in stock?
PCM1861DBTR availability should be confirmed through the Request a Quote form on this page using the required order quantity and delivery date. Inventory status can vary by package quantity, production schedule, and region. Provide your planned consumption and any date-by-date requirements so the quote response can reflect an actionable supply position.

엔지니어링 참조 데이터: PCM1861DBTR — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose PCM1861DBTR when the system requires a 2-channel, 24-bit audio ADC operating up to 192 kHz and hardware-controlled operating states. Its integrated PGA and universal front end are useful when analog gain adjustment must occur close to the converter, while single 3.3 V operation simplifies compact consumer, voice, monitoring, and USB-audio designs. PCM1860DBTR is the closest same-package alternative and offers similar headline conversion specifications, but its software-control approach can require different firmware and initialization. Treat it as a drop-in candidate only after checking every pin function and timing requirement. For designs where software-configured control is preferred, PCM1860DBTR may be more natural. Neither device should be assumed to replace an unrelated converter family unless its footprint, clock architecture, interface protocol, and analog requirements have all been verified.

대체품과의 비교

파라미터 이 제품 PCM1860DBTR
Package 30-pin TSSOP (DBT) 30-pin TSSOP (DBT)
Brand Texas Instruments Texas Instruments
Channel Count 2 channels 2 channels
Resolution 24 bit 24 bit
Maximum Sampling Rate 192 kHz 192 kHz
Signal-to-Noise Ratio 110 dB 110 dB
Control Method Hardware controlled Software controlled
Supply Voltage 3.3 V single supply 3.3 V single supply
Programmable Gain Amplifier Integrated Integrated
Host Interfaces I2C and SPI I2C and SPI

주요 차별점

  • Hardware-controlled system architecture (vs PCM1860DBTR)
  • Integrated high-performance stereo conversion (vs PCM1860DBTR)
  • Universal front end with integrated PGA (vs PCM1860DBTR)

설계 노트

Route analog input traces as short, direct paths and place input filtering or protection components close to the corresponding converter pins. Keep the SPI clock and data traces away from the audio inputs, especially when the converter and digital host share a board. Use a continuous ground reference beneath the analog section and follow the land pattern and thermal-pad guidance in the PCM1861 datasheet for the selected 30-pin TSSOP package.

Use the recommended 3.3 V supply-decoupling network and place it adjacent to the converter's supply and ground pins. Decoupling capacitors should have short ground paths, and the supply trace should have sufficient copper area without creating unnecessary loop inductance. Because converter performance depends on clean analog power, avoid sharing narrow supply branches between the PCM1861DBTR and switching circuitry unless filtering is explicitly designed into the rail.

Do not substitute PCM1860DBTR solely because it has the same TSSOP package and similar headline specifications. Its software-control arrangement may require different host procedures and pin treatment. Before replacement, compare analog input assignments, clock requirements, control pins, serial timing, power-up behavior, filter configuration, and software initialization. A footprint match does not by itself guarantee system compatibility.

Determine the required master-clock and serial-interface timing before finalizing the PCB. Configure the converter's sampling mode, digital filter, data format, and channel mapping to match the receiving controller. Use controlled-impedance digital routing where appropriate, provide a continuous return path beneath clock traces, and keep connector or switching-regulator return currents from crossing the sensitive analog-input region.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

Use the manufacturer product page and current material-declaration records to determine the applicable environmental and substance compliance status for the exact orderable MPN.

데이터 검증일: 2026-11-20 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

PCM1861DBTR datasheet PCM1861DBTR datasheet pdf PCM1861DBTR pinout PCM1861DBTR 30-TSSOP pinout Texas Instruments PCM1861DBTR PCM1861DBTR 192kHz audio ADC PCM1861DBTR equivalent PCM1861DBTR replacement PCM1861DBTR vs PCM1860DBTR PCM1861DBTR hardware controlled ADC PCM1861DBTR application circuit PCM1861DBTR price PCM1861DBTR stock PCM1861DBTR USB audio converter

관련 부품 & 용어

Texas Instruments PCM1861DBTR PCM1860DBTR PCM1861 PCM186x family audio ADC analog-to-digital converter mixed-signal semiconductor delta-sigma ADC programmable-gain amplifier PGA universal front end I2C SPI 110 dB signal-to-noise ratio 24-bit resolution 192 kHz sampling rate 3.3 V single supply 30-pin TSSOP TSSOP package family surface-mount package USB audio voice processing RoHS REACH
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기