Microchip Technology

PIC10F222-E/OT - 8-Bit 8MHz Flash MCU | Microchip Technology

MPN: PIC10F222-E/OT ✓ Aktif
SOT-23-6 Package 8 MHz Speed 768 bytes (512 x 12 bits) Memory
MOQ: 1 |

PIC10F222-E/OT Ringkasan

The Microchip Technology PIC10F222-E/OT is a low-cost, 8-bit, fully static, Flash-based CMOS microcontroller with 768 bytes of program Flash, 23 bytes of RAM, and four I/O lines in a 6-pin SOT-23 package. It operates at up to 8 MHz and provides an 8-bit ADC for compact embedded control designs.

A microcontroller is a programmable semiconductor that combines a processor core, memory, and peripherals on one integrated circuit. The PIC10F222 belongs to the PIC10F family and uses a compact RISC instruction set containing 33 single-word instructions. Most instructions execute in one cycle, while program branches require two cycles, allowing small programs to run with predictable timing in battery-powered and embedded products.

The PIC10F222-E/OT combines 512 program words of 12-bit instruction storage with 23 bytes of data memory. Its four I/O lines support digital control and input functions, while the integrated 8-bit analog-to-digital converter enables the device to measure analog inputs without requiring a separate ADC. A 6-pin SOT-23 package makes the device suitable for space-constrained assemblies where a larger controller is unnecessary.

The PIC10F222-E/OT is built around a fully static CMOS design, allowing processing to continue in low-power operating states. The manufacturer describes 12-bit-wide instructions as highly symmetrical, providing approximately 2:1 code compression compared with conventional 8-bit microcontrollers in the same class. This efficiency helps reduce program-memory requirements for compact control routines.

Typical uses include simple timers, push-button interfaces, LED indicators, battery-powered monitors, analog sensing nodes, and small embedded controllers. Its low pin count simplifies PCB layout, while the ADC allows product designers to combine sensing and control in one device. The extended-temperature ordering option is suited to industrial environments requiring operation from -40°C to +125°C.

When laying out a design, assign each I/O pin to its required external function and keep the analog input connection short to minimize noise pickup. Confirm the oscillator, reset configuration, programming method, and decoupling requirements against the manufacturer datasheet. This page also organizes package information, practical application guidance, direct comparison points, and documented drop-in alternatives for engineering evaluation.

Pilihan pengganti yang segera untuk PIC10F222-E/OT — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

Varietas dalam siri ini

Model serupa yang kompatibel dengan pengganti yang segera PIC10F222-E/OT (sama faktor bentuk dan kaki) — berbeza dalam Instruction Set, Package, Operating Temperature Range, Architecture, Program Memory.

Microchip Technology
Instruction Set: 33 single-word/single-cycle instructions
Package: 8-pin DFN with Exposed Pad (MC)
Microchip Technology
Instruction Set: 33 single-word RISC instructions
Operating Temperature Range: -40 °C to +85 °C
Architecture: Fully static RISC
Microchip Technology
Instruction Set: 33 single-word, single-cycle instructions
Package: 8-PDIP
Program Memory: 768 bytes Flash (512 x 12)
Microchip Technology
Instruction Set: 33 single-word/single-cycle (excluding branches)
Operating Temperature Range: -40 °C to +85 °C (Industrial, "I")

PIC10F222T-I/OT

✅ Masuk Drop-In
Microchip Technology
📦 SOT-23-6
8-bit PIC10 RISC · Flash · 768 B (512 x 12 words) · 16 B · 0 B (no on-chip EEPROM) · 8 MHz (4 MIPS at 4 MHz instruction rate) · 4 (GP0, GP1, GP2, GP3 open-drain input-only)

Hubungi untuk harga

Lihat Datasheet →

PIC10F222-I/OT

✅ Masuk Drop-In
Microchip Technology
📦 SOT-23-6
8-bit Flash-based CMOS microcontroller · 8 MHz · 768 bytes (512 x 12 bits) · 23 bytes RAM · 4 pins · 8 bits · 33 single-word RISC instructions · 1 µs

Hubungi untuk harga

Lihat Datasheet →

PIC10F322T-E/OT

✅ Masuk Drop-In
📦 SOT-23-6
Same Microchip 6-pin SOT-23 footprint and E-grade ordering option; PIC10F322-family program memory, RAM, and peripheral details require confirmation before substitution.

📋 Alternatif rujukan (tidak dalam katalog)

PIC10F322T-I/OT

✅ Masuk Drop-In
📦 SOT-23-6
Same Microchip SOT-23-6 footprint and I-grade ordering option; PIC10F322-family memory and peripheral differences must be checked against the original firmware requirements.

📋 Alternatif rujukan (tidak dalam katalog)

PIC10F222-E/OT Penilaian maksimum & Ciri-ciri Elektrik

Device Type 8-bit fully static Flash-based CMOS microcontroller
Frekuensi Klock Maksimum 8 MHz
Program Memory 768 bytes (512 x 12 bits)
Data Memory 23 bytes
Number of I/O Lines 4 lines
Architecture RISC
Instruction Count 33 single-word instructions
Typical Instruction Cycle 1 µs
Program Branch Cycle 2 cycles
Instruction Width 12 bits
Code Compression Typically 2:1
ADC Resolution 8 bits
ADC Quantity 1
Gambaran Suhu Operasi -40°C to +125°C
Kemasan SOT-23-6
Jenis Pemasangan Surface mount
Program Memory Type Flash
Processor Type 8-bit

Panduan Konfigurasi Pin PIC10F222-E/OT sot-23-6

Konfigurasi pin untuk PIC10F222-E/OT (sot-23-6 pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.

Garis bentuk pengecah pakai sot-23-6 untuk PIC10F222-E/OT

Tiada data garisan pin yang diperoleh untuk PIC10F222-E/OT.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

PIC10F222-E/OT patut untuk 6 aplikasis: Battery-Powered Sensor Nodes, Industrial Switch and Button Interfaces, LED Status and Warning Indicators, Analog Control and Threshold Modules, Small Motor and Actuator Controllers, Portable Measurement and Metering Devices.

🔋

Battery-Powered Sensor Nodes

The PIC10F222-E/OT fits compact battery-powered sensing nodes because it combines an 8-bit ADC, 23 bytes of RAM, four I/O lines, and fully static CMOS operation in a 6-pin SOT-23-6 package. The ADC can acquire an analog sensor signal while the microcontroller performs thresholding, filtering, and state updates without a separate data converter. Its 8 MHz clock also supports short control routines and timed sampling. Because the device has only 512 program words, firmware should focus on acquisition, calibration, and status reporting rather than complex protocol stacks.

🏭

Industrial Switch and Button Interfaces

The PIC10F222-E/OT is suitable for small industrial control panels that need debounced inputs, indicator control, and a compact controller footprint. Its four I/O lines can monitor switches and drive simple outputs, while the integrated 8-bit ADC can support an analog control or status input. The -40°C to +125°C operating range suits equipment deployed across industrial temperature conditions. Firmware should include debounce timing, contact-state filtering, fault counters, and a defined output state for startup or fault conditions.

💡

LED Status and Warning Indicators

The PIC10F222-E/OT can implement compact LED status, warning, or acknowledgment panels where several indicators and a simple input are required. Its 23 bytes of RAM and 768 bytes of Flash are adequate for animation tables, blink patterns, countdown timers, and switch acknowledgment routines. The four I/O lines reduce component count compared with a larger controller, and the SOT-23-6 package simplifies dense panel layouts. Designers should size current-limiting resistors from the MCU output characteristics and the LED forward voltage rather than assuming all indicators can be driven simultaneously.

🎛️

Analog Control and Threshold Modules

The PIC10F222-E/OT works well in small analog control modules where one sensor level must be converted into a digital decision. The 8-bit ADC handles coarse measurements, while the microcontroller applies thresholds, hysteresis, and timing before controlling an output. Its RISC core executes most instructions in one cycle at 8 MHz, allowing responsive control without a larger processor. For accuracy-critical designs, verify ADC reference tolerances, input acquisition time, source impedance, and output-drive limits in the manufacturer data sheet, and add filtering when the sensor signal changes rapidly.

⚙️

Small Motor and Actuator Controllers

The PIC10F222-E/OT can control a simple actuator, relay, or low-current motor stage where the application needs only a few inputs and outputs. The MCU can store motion sequences, impose timing limits, detect a switch input, and provide a fail-safe output state after reset. Its 8 MHz processing rate provides enough throughput for basic position or duty-cycle management, while the 6-pin package keeps the controller compact. An appropriate transistor or driver stage is required for loads beyond the microcontroller's output capability, and inductive loads need suitable suppression and grounding.

📊

Portable Measurement and Metering Devices

The PIC10F222-E/OT supports compact metering products that measure one analog quantity, apply calibration, and report a result through a simple display or output. The integrated 8-bit ADC avoids a separate converter, while 23 bytes of RAM and 512 program words support lightweight filtering and conversion routines. Its SOT-23-6 package is useful in handheld instruments and fixed meters with limited board space. For precision measurement, evaluate the ADS1262IPW when higher-resolution conversion is required; otherwise follow the PIC10F222 ADC timing and reference-layout recommendations.

What are the key specifications of PIC10F222-E/OT that engineers should know?
The PIC10F222-E/OT is an 8-bit, 8 MHz, fully static Flash-based CMOS microcontroller with 768 bytes of program Flash, 23 bytes of RAM, four I/O lines, and an 8-bit ADC. It uses 33 single-word RISC instructions, executes most instructions in one cycle, and is packaged in 6-pin SOT-23. According to the Microchip PIC10F220/222 Data Sheet, the 12-bit instruction architecture typically provides 2:1 code compression for compact embedded programs.
Where can I download the PIC10F222-E/OT datasheet PDF?
The official PIC10F220/222 Data Sheet is available from Microchip Technology at https://ww1.microchip.com/downloads/en/DeviceDoc/40001270F.pdf. It contains the device architecture, electrical characteristics, memory organization, ADC information, and package details needed for a PIC10F222 design. The manufacturer product page for PIC10F222 is also available at https://www.microchip.com/en-us/product/PIC10F222 and provides linked technical documentation and product resources.
What does the PIC10F222-E/OT E suffix mean?
The E suffix identifies the extended-temperature version of the PIC10F222 in the SOT-23-6 ordering code. The listed operating range is -40°C to +125°C, making this version appropriate for industrial equipment exposed to temperatures above the commercial range. The /OT suffix identifies the 6-pin SOT-23 package with tape-and-reel ordering. Confirm ordering-code details against the Microchip product page before releasing a production BOM.
How much Flash and RAM does the PIC10F222 have?
The PIC10F222-E/OT provides 768 bytes of Flash program memory, organized as 512 words of 12 bits, and 23 bytes of RAM. According to the Microchip PIC10F220/222 Data Sheet, the 12-bit-wide, symmetrical instruction design typically produces approximately 2:1 code compression relative to conventional 8-bit instruction formats. This makes the device suitable for compact control loops, state machines, and modest data-handling routines.
Does PIC10F222-E/OT include an ADC?
Yes, the PIC10F222-E/OT includes one 8-bit analog-to-digital converter. It allows a design to measure an analog input with the same microcontroller used for control and digital I/O, reducing the number of external components in compact sensor or monitoring products. The ADC implementation, input channels, conversion timing, and reference arrangement should be selected from the pin and electrical tables in the manufacturer data sheet.
What is the PIC10F222 instruction set and execution speed?
The PIC10F222 uses a RISC instruction set with 33 single-word instructions. According to the Microchip product description, all instructions are single-cycle, corresponding to 1 µs at the 8 MHz operating frequency, except program branches, which require two cycles. Its 12-bit-wide instruction format is symmetrical and typically compresses code by about 2:1, improving utilization of the device's 512-word program memory.
Where can I buy PIC10F222-E/OT and check current availability?
Use the Request a Quote form on this page to request current availability, quantity breaks, and lead time for the PIC10F222-E/OT. The quote request identifies the exact 6-pin SOT-23 ordering code and helps purchasing confirm current component sourcing and delivery expectations without relying on a static listing. For technical qualification, use the linked Microchip datasheet and product page.
What is the current price of PIC10F222-E/OT?
The current commercial price is not stated in a static product description because pricing and availability can change with quantity and supply conditions. Submit the Request a Quote form on this page with your required quantity and delivery location to obtain current pricing for the exact PIC10F222-E/OT part number. Engineers should also request the intended package and reel configuration to eliminate suffix ambiguity.
What is the lead time and stock status of PIC10F222-E/OT?
Current lead time and stock status should be confirmed through the Request a Quote form on this page. Provide the required quantity, reel size, target date, and ship-to country so purchasing can return a current sourcing commitment for PIC10F222-E/OT. The Microchip product page can be used to confirm the device family and documentation, while current logistics should be handled through the quotation request.
What is the best drop-in replacement for PIC10F222-E/OT?
PIC10F222T-I/OT is the closest documented drop-in candidate because it retains the same SOT-23-6 footprint and 8-bit, 8 MHz, 768-byte Flash configuration, while changing the ordering temperature designation. Before substitution, confirm the required temperature grade, pin functions, programming configuration, and qualification requirements. Request a quote for the exact replacement MPN so purchasing can avoid ordering a suffix with unintended environmental specifications.
Can PIC10F222T-I/OT replace PIC10F222-E/OT?
PIC10F222T-I/OT can serve as a footprint-compatible candidate because both parts use SOT-23-6 and the documented listing identifies 8-bit, 8 MHz operation with 768 bytes of Flash. The ordering temperature options differ, so replacement is appropriate only when the target's I-grade requirements meet the original design's environmental needs. Verify the full pin, electrical, and programming specifications in the manufacturer data sheet before production use.
PIC10F222-E/OT vs PIC10F222T-I/OT: which is better for industrial control?
PIC10F222-E/OT is the better direct choice when the design explicitly requires the extended-temperature E-grade ordering option, with a listed range of -40°C to +125°C. PIC10F222T-I/OT uses the industrial I designation and shares the SOT-23-6 package and core PIC10F222 architecture. Select between them by matching the required environmental qualification and procurement configuration, not by pin count alone.
When should I choose PIC10F222-E/OT over a larger PIC microcontroller?
Choose PIC10F222-E/OT when the product needs only modest code storage, 23 bytes of RAM, four I/O lines, one 8-bit ADC, and a compact 6-pin footprint. A larger PIC is preferable when the firmware, RAM, I/O, communication peripherals, or precision ADC requirements exceed those limits. The PIC10F222 is effective for simple timers, sensors, indicators, and compact state machines where minimizing size and complexity is the priority.
Is PIC10F222-E/OT suitable for battery-powered sensing devices?
The PIC10F222-E/OT is suitable for many battery-powered sensing devices because it combines a fully static CMOS implementation, 23 bytes of RAM, four I/O lines, and an integrated 8-bit ADC in a compact SOT-23-6 package. The actual battery life depends on the selected clock configuration, active duty cycle, ADC sampling rate, and external sensor current. Use the manufacturer sleep and operating-current characteristics to calculate the system power budget.
How do I design the PCB layout for PIC10F222-E/OT?
Place the microcontroller close to the pins it drives, route analog inputs away from switching nodes, and follow the recommended decoupling connection in the manufacturer data sheet. Because the device is only available in a 6-pin SOT-23-6 package, pad spacing is tight; inspect the recommended land pattern and assembly tolerances before layout release. Preserve the required programming access and confirm all exposed signals and ground connections during schematic review.

Data referensi kejuruteraan untuk PIC10F222-E/OT — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose PIC10F222-E/OT when the design needs an 8-bit controller with 768 bytes of Flash, 23 bytes of RAM, four I/O lines, and an integrated 8-bit ADC in a compact SOT-23-6 package. Its 8 MHz RISC core is well suited to timers, simple state machines, button interfaces, status indicators, and small analog monitoring products. Choose PIC10F222T-I/OT when the I-grade ordering option meets the environmental requirement and the same core, memory, and package are desired. PIC10F222-I/OT is another footprint-compatible ordering option, but its qualification and temperature details must be matched to the product. PIC10F322T-E/OT and PIC10F322T-I/OT retain the SOT-23-6 footprint but belong to a related family whose memory and peripheral differences may affect firmware; use them only after a complete pin and functional comparison. Move to a larger PIC or higher-resolution ADC when code size, RAM, I/O count, communications, or measurement precision exceeds the PIC10F222's capabilities.

Perbandingan dengan Gantian

Parametr Produk Ini PIC10F222T-I/OT PIC10F222-I/OT PIC10F322T-E/OT PIC10F322T-I/OT
Package SOT-23-6 SOT-23-6 SOT-23-6 SOT-23-6 SOT-23-6
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Processor Architecture 8-bit RISC 8-bit RISC 8-bit RISC 8-bit PIC10F family 8-bit PIC10F family
Operating Temperature Range -40°C to +125°C I-grade designation; confirm numeric range I-grade designation; confirm numeric range E-grade designation; confirm numeric range I-grade designation; confirm numeric range
Programming Memory Type Flash Flash Flash Flash Flash

Penyeberangsung Jelas

  • Combines an ADC and four I/O lines in a 6-pin package (vsATTINY13A-SUR)
  • Compact Flash-based control with 12-bit instructions (vsATTINY20-MMHR)
  • SOT-23-6 footprint-compatible family options (vsPIC10F222-I/OT)

Catatan Desain

Use the SOT-23-6 land pattern and pin-1 orientation specified by the manufacturer, then confirm pad dimensions against the PCB assembly process. Place the device close to its local decoupling capacitor and keep the connection path short. With only six pins, a layout error can easily affect power, programming, reset, or an analog function simultaneously; perform a pin-by-pin schematic and footprint review before release.

Route the analog input directly to its assigned device pin and keep it away from switching nodes, clock edges, and high-current return paths. The 8-bit ADC is appropriate for coarse measurements, but accuracy also depends on source impedance, acquisition time, reference stability, and input filtering. Follow the ADC application information in the Microchip data sheet and include calibration only after characterizing offset and gain across the intended operating range.

Budget the device supply for both active and low-power operating states rather than relying on the maximum clock rate alone. A battery design should account for ADC sampling energy, sensor load, indicator drive, and leakage during storage. Define a safe output state for every externally controlled pin so the board remains predictable during reset, brownout, programming, and firmware faults.

Do not assume that SOT-23-6 compatibility alone guarantees interchangeable behavior across PIC10F222 and PIC10F322 variants. Program memory, RAM, oscillator options, peripheral assignments, and interrupt behavior can differ even when the package and pin count match. For every substitution, compare the manufacturer ordering information, pin descriptions, electrical limits, programming configuration, and generated firmware requirements.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

No explicit compliance certification for the exact ordering code was identified. AEC-Q100 is not applicable because this is not an automotive-qualified ordering variant.

Pencarian Berhubungan

pic10f222 datasheet pic10f222 pdf pic10f222 pwm PIC10F222-E/OT datasheet PIC10F222-E/OT pinout PIC10F222-E/OT SOT-23-6 footprint PIC10F222 8-bit microcontroller specifications PIC10F222-E/OT equivalent PIC10F222-E/OT replacement PIC10F222E/OT price PIC10F222E/OT stock Microchip PIC10F222-E/OT

Komponen dan Tanda berkaitan

Microchip Technology PIC10F222-E/OT PIC10F222 PIC10F222T-I/OT PIC10F222-I/OT PIC10F322T-E/OT PIC10F322T-I/OT PIC10F family microcontroller embedded controller 8-bit RISC processor Flash memory RAM 8-bit ADC SOT-23-6 surface-mount package fully static CMOS RoHS REACH industrial control battery-powered sensor analog control program memory digital I/O
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ