Microchip Technology

PIC16F1455-E/P - 48MHz 8-Bit USB Microcontroller | Microchip

MPN: PIC16F1455-E/P ✓ Aktif
3.3 V to 5 V Vdss 14-pin PDIP Package 48 MHz Speed 14 KB (8K x 14 bits) Memory
MOQ: 1 |

PIC16F1455-E/P Ringkasan

The Microchip Technology PIC16F1455-E/P is an 8-bit PIC16-family flash microcontroller with a 48 MHz system clock, 14 KB of program Flash memory, 1024 bytes of RAM, 12 I/O pins, and USB 2.0 connectivity in a 14-pin PDIP package. The -E device designation identifies the extended-temperature version for industrial and automotive-style operating environments.

A PIC16F1455 microcontroller belongs to the 8-bit RISC microcontroller category, which sits within the broader embedded-controller and semiconductor hierarchy. Unlike a general-purpose processor, it integrates flash program memory, RAM, oscillators, timers, serial interfaces, and USB support into one device. This integration allows compact USB-connected instruments, control modules, and data-acquisition nodes to operate without a separate external memory or interface controller.

The device's headline characteristics are its 48 MHz operating frequency, 14 KB of Flash memory, and 1024 bytes of RAM. The 14-pin PDIP package provides a through-hole footprint suited to prototyping, legacy industrial boards, and designs assembled through-hole. Its 12 I/O pins support digital control and serial-interface functions, while the integrated USB 2.0 interface reduces the external circuitry needed for direct USB connectivity.

PIC16F1455 devices use the PIC16 enhanced mid-range RISC architecture and combine programmable Flash with integrated USB capability. The 14 KB program memory is organized as 8K by 14 bits according to the product listing, providing dedicated storage for firmware. The 48 MHz clock capability supports faster control-loop execution and responsive USB servicing than entry-level PIC16 devices operating at lower clock rates.

Typical applications include USB-connected sensor interfaces, compact industrial controllers, USB-to-serial protocol bridges, laboratory data-acquisition equipment, and automotive accessory modules. The 14-pin PDIP footprint is particularly useful where a through-hole prototype or repairable controller assembly is preferred over a fine-pitch surface-mount package.

Designers should verify the USB D+ and D- pin multiplexing, programming requirements, and supply-voltage limits against the manufacturer's pin-description and electrical-characteristics tables. USB interface pins that are also used for in-circuit programming have voltage restrictions, so programming setup must be checked before a 5 V operating rail is connected.

Pilihan pengganti yang segera untuk PIC16F1455-E/P — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

Varietas dalam siri ini

Model serupa yang kompatibel dengan pengganti yang segera PIC16F1455-E/P (sama faktor bentuk dan kaki) — berbeza dalam Package, Mounting Type, Program Memory Size, USB Interface, USB Module.

Microchip Technology
Package: 14-pin PDIP (P)
USB Module: USB 2.0 full-speed device with internal clock recovery
Microchip Technology
USB Interface: USB 2.0 module with host clock recovery
Microchip Technology
Package: 14-SOIC (SL), 0.154 in / 3.90 mm body width
Mounting Type: Surface Mount
USB Module: USB 2.0 Full-Speed with clock recovery from USB
Microchip Technology
Program Memory Size: 14 KB Flash (8K x 14)
USB Interface: USB 2.0 with clock recovery
Microchip Technology
USB Interface: USB 2.0 Full-Speed (on-chip SIE + transceiver)
Microchip Technology
Package: 20-PDIP (P)
Mounting Type: Through Hole
Program Memory Size: 14 KB (8K x 14)
Microchip Technology
Package: 20-pin PDIP (P), through-hole
Mounting Type: Through Hole
USB Module: USB 2.0 Full-Speed with on-chip clock recovery
Microchip Technology
Package: 20-pin PDIP (P)
Mounting Type: Through-Hole (DIP)
Program Memory Size: 3.5 KB (2K x 14 words)

PIC16F1455-I/P

✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan
Microchip Technology
📦 14-pin PDIP
8-bit PIC16 RISC · 48 MHz · 14 KB Flash (8K x 14) · Flash · 1024 bytes · 48 MHz · 49 instructions · 16 levels

Hubungi untuk harga

Lihat Datasheet →

PIC16F1454-I/P

✅ Masuk Drop-In
Microchip Technology
📦 14-pin PDIP
8-bit Flash microcontroller · Enhanced mid-range PIC16 RISC core · 48 MHz · 200 ns · 49 instructions · 16 levels · 14 KB (8K x 14) · 1 KB

Hubungi untuk harga

Lihat Datasheet →

PIC16F1456-I/P

✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 14-pin PDIP
Same PIC16F145x family and 14-pin PDIP footprint, with a different Flash capacity and peripheral mix; memory and USB requirements must be revalidated.

📋 Alternatif rujukan (tidak dalam katalog)

PIC16F1457-I/P

✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 14-pin PDIP
Same PIC16F145x family and 14-pin PDIP footprint, with a different Flash capacity and peripheral mix; program-memory use and pin-function compatibility require verification.

📋 Alternatif rujukan (tidak dalam katalog)

PIC16F1459-I/P

✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan
Microchip Technology
📦 14-pin PDIP
PIC16 enhanced mid-range 8-bit RISC · 49 instructions · 48 MHz · 14 KB (8K x 14 words) · 1 KB · None (uses HEF NVM instead) · 128 bytes · 16

Hubungi untuk harga

Lihat Datasheet →

PIC16F1455-E/P Penilaian maksimum & Ciri-ciri Elektrik

Product Type 8-bit Flash Microcontroller
Architecture PIC16 RISC
Frekuensi Klock Maksimum 48 MHz
Program Memory Size 14 KB (8K x 14 bits)
Program Memory Type Flash
RAM Size 1024 bytes
Data EEPROM Size 0 bytes
I/O Pin Count 12 pins
USB Interface USB 2.0
Supply Voltage Range 3.3 V to 5 V
Kemasan 14-pin PDIP
Jenis Pemasangan Through-hole
Temperature Grade Extended temperature
Automotive Qualification Automotive
Kiraan Pin 14 pins

Konfigurasi Pin PIC16F1455-E/P

DIP-14 Package Pinout Diagram DIP-14 14-pin dual inline, 7.62mm pitch, JEDEC MS-001. 1 14 2 13 3 12 4 11 5 10 6 9 7 8 DIP-14
Pin 1 MCLR/VPP — Master clear and programming voltage input
Pin 2 RA0 — Port A digital input/output
Pin 3 RA1 — Port A digital input/output
Pin 4 RA2 — Port A digital input/output
Pin 5 RA3 — Port A digital input/output
Pin 6 RA5/OSC1 — Port A input and oscillator input function
Pin 7 OSC2/RA4 — Oscillator output and port A input/output function
Pin 8 VDD — Positive supply voltage
Pin 9 VSS — Ground reference
Pin 10 RB0 — Port B digital input/output
Pin 11 RB1 — Port B digital input/output
Pin 12 RB2 — Port B digital input/output
Pin 13 RB3 — Port B digital input/output
Pin 14 RB4 — Port B digital input/output

Aplikasi Biasa

PIC16F1455-E/P patut untuk 6 aplikasis: USB Connected Sensor Interface, USB-to-Serial Protocol Bridge, Compact Industrial Control Module, USB Data Acquisition Controller, Automotive Accessory Interface, USB-Enabled Programmable Control Board.

🧩

USB Connected Sensor Interface

The PIC16F1455-E/P suits compact sensor-interface modules because its 48 MHz clock provides responsive firmware execution, its 14 KB of Flash holds application and USB routines, and its integrated USB 2.0 interface removes the need for a separate USB controller. The 12 available I/O pins can handle digital sensors, status indicators, and control signals. A host can enumerate the module as a dedicated USB device while the microcontroller performs local sampling and configuration. When analog signals are required, confirm the ADC channel count and resolution in the manufacturer datasheet before assigning the analog inputs.

🌐

USB-to-Serial Protocol Bridge

The PIC16F1455-E/P can implement a USB-to-serial bridge when a host computer must communicate with legacy serial equipment. Its 48 MHz system clock supports responsive command processing, while 1024 bytes of RAM and 14 KB of Flash provide space for USB descriptors, framing logic, and protocol translation. The integrated USB 2.0 peripheral handles enumeration and data transfer while the remaining I/O pins support the serial side. Firmware must reconcile USB and legacy-port timing, and the serial-interface pin mapping should be confirmed from the device pin table.

🏭

Compact Industrial Control Module

The PIC16F1455-E/P is appropriate for small industrial controllers that need deterministic control logic, USB connectivity, and through-hole assembly. The 48 MHz maximum clock and PIC16 RISC architecture allow efficient loop execution, while 12 I/O pins support relays, digital sensors, and machine-state inputs. Its 14-pin PDIP format simplifies inspection and replacement on legacy-style boards. Design the supply rails for the USB-connected operating environment, provide the required bypass capacitance, and use the extended-temperature ordering code when ambient conditions exceed the industrial-temperature range.

📊

USB Data Acquisition Controller

The PIC16F1455-E/P can serve as the central controller in a compact USB data-acquisition system. Its 48 MHz clock supports sampling control, the 14 KB Flash accommodates acquisition firmware and configuration tables, and 1024 bytes of RAM provides working space for buffering and protocol handling. USB 2.0 allows the controller to connect directly to a computer without an external bridge. For continuous acquisition, evaluate the available ADC performance, timer resources, and data-buffer depth against the required sample rate; those values are defined in the manufacturer's electrical-characteristics and peripheral sections.

🚗

Automotive Accessory Interface

The PIC16F1455-E/P can be used in automotive accessory and service interfaces where USB provides a maintenance or configuration link while the microcontroller handles local vehicle-related logic. The extended-temperature ordering code, 48 MHz clock, and integrated USB 2.0 support combine compact control capability with a useful service interface. Its 14-pin PDIP package is practical for prototypes and ruggedized through-hole modules. Automotive use requires more than the -E designation: verify the exact AEC-Q100 qualification status, transient immunity, supply limits, and applicable automotive validation requirements with Microchip.

🔧

USB-Enabled Programmable Control Board

The PIC16F1455-E/P is well suited to a programmable control board that is configured from a USB-connected host. The 48 MHz processor can execute real-time control algorithms, while 14 KB of Flash and 1024 bytes of RAM provide resources for configuration tables, state logic, and a USB command interface. Through-hole assembly in the 14-pin PDIP package makes the board easy to prototype and hand-solder. Plan the USB connector, data-line routing, programming access, and supply conditioning together because the programming and USB functions share pin resources.

What are the key specifications of PIC16F1455 that engineers should know?
The PIC16F1455 is an 8-bit flash microcontroller rated for operation up to 48 MHz, with 14 KB of program Flash memory, 1024 bytes of RAM, 12 I/O pins, and USB 2.0 connectivity. The PIC16F1455-E/P places this device in a 14-pin PDIP package, and the E suffix denotes the extended-temperature configuration. These figures establish the part as a compact embedded USB controller suitable for industrial, control, and data-acquisition products.
What is the PIC16F1455-E/P and what does it do?
The PIC16F1455-E/P is a Microchip Technology PIC16-family 8-bit RISC microcontroller with USB 2.0 connectivity, a 48 MHz maximum clock frequency, and 14 KB of Flash memory. It integrates programmable Flash, 1024 bytes of RAM, 12 I/O pins, oscillators, timers, and USB functions in a 14-pin PDIP package. It is designed for compact USB-connected control, sensing, and communication equipment.
Where can I download the PIC16F1455 datasheet PDF?
The authoritative PIC16F1455 datasheet is available from the Microchip Technology product page for PIC16F1455. Open the product-page resources for the manufacturer datasheet and select the PDF documentation for the PIC16F1459 family. Use the pin-description table and electrical-characteristics sections to confirm USB pin multiplexing, programming connections, supply limits, and timing before laying out a PCB.
Where can I find the PIC16F1455-E/P pinout?
The PIC16F1455-E/P pinout is defined in the pin-description table in the manufacturer datasheet for the PIC16F1459 family. The 14-pin PDIP version includes MCLR, port A functions, oscillator functions, port B functions, VDD, and VSS. USB D+ and D- are multiplexed with programming-related functions, so the pin table must be used when assigning external circuitry and programming headers.
How do I program a PIC16F1455?
A PIC16F1455 can be programmed through its in-circuit serial programming interface using a compatible programmer and the correct programming adapter. The PIC16F1455 family provides low-voltage programming, and the manufacturer supports programming through MPLAB-compatible tools. Check the datasheet's programming-pin multiplexing carefully because the USB data pins can overlap with programming signals and may impose voltage restrictions during programming.
Can PIC16F1455 operate as a USB device?
Yes, the PIC16F1455 includes USB 2.0 connectivity in an 8-bit microcontroller that also provides 14 KB of Flash and 1024 bytes of RAM. Its 48 MHz clock capability supports responsive firmware execution and USB service handling. USB firmware, pull-up control, clock configuration, and bus decoupling should be implemented according to the USB implementation guidance in the manufacturer documentation.
What is the difference between PIC16F1455-E/P and PIC16F1455-I/P?
The principal ordering-code difference between PIC16F1455-E/P and PIC16F1455-I/P is the temperature grade indicated by the E and I suffixes, while both use the 14-pin PDIP package and belong to the PIC16F1455 family. The E/P ordering code denotes the extended-temperature configuration. The manufacturer temperature tables should be checked when both order codes appear equivalent in a purchasing system.
Is PIC16F1455-E/P suitable for USB sensor acquisition equipment?
The PIC16F1455-E/P is suitable for compact USB sensor-acquisition equipment because it combines a 48 MHz clock, 14 KB of Flash, 1024 bytes of RAM, 12 I/O pins, and USB 2.0 in one package. It can collect digital sensor states and perform local control while presenting a USB interface to a host computer. Analog sensor conditioning requires the device's ADC capabilities and external components to be confirmed against the datasheet.
What can replace the PIC16F1455-E/P?
The closest drop-in replacement for the PIC16F1455-E/P is PIC16F1455-I/P because it retains the same device family, 14-pin PDIP package, and core electrical specifications while changing the temperature grade. Other family members can have different Flash capacities, USB feature sets, or peripheral configurations, so they are not automatic substitutes. Confirm the pin table, program-memory requirements, and USB function block before approving any replacement.
Is PIC16F1455 the same as PIC16F1454?
No, the PIC16F1454 and PIC16F1455 are related PIC16 devices but they are not automatically interchangeable. The PIC16F1455 is specified with 14 KB of Flash and 1024 bytes of RAM, while the PIC16F1454 appears in the family comparison with a different configuration. Their exact program-memory, RAM, and USB requirements must be compared before treating either device as a substitute for the other.
Which drop-in alternative is best for an industrial PIC16F1455-E/P design?
PIC16F1455-I/P is the most direct drop-in alternative for an industrial design because it keeps the same PIC16F1455 family, 48 MHz maximum clock, 14 KB Flash, 1024 bytes of RAM, and 14-pin PDIP package. The deciding factor is the temperature grade: select the E/P ordering code when the application requires the extended-temperature specification and the I/P ordering code when the industrial grade is sufficient.
When should I choose PIC16F1455-E/P instead of a smaller package MCU?
Choose PIC16F1455-E/P when USB connectivity, a 48 MHz clock, 14 KB of Flash, and through-hole assembly in a 14-pin PDIP package are priorities. A smaller surface-mount MCU may offer a smaller footprint, but it can require a different PCB layout and may not provide the same integrated USB function set. The PDIP package also simplifies prototyping, inspection, and repair of controller assemblies.
What is the best Microchip equivalent for PIC16F1455-E/P?
The best Microchip equivalent for PIC16F1455-E/P is PIC16F1455-I/P, provided its temperature rating meets the application's operating range. It preserves the 14-pin PDIP package, 48 MHz clock capability, 14 KB Flash, 1024 bytes of RAM, and USB-equipped PIC16F1455 function set. No verified cross-manufacturer pin-compatible replacement was identified for this configuration, so a different manufacturer's MCU should not be treated as drop-in without a complete pin and peripheral-function review.
Where can I buy PIC16F1455-E/P online?
Use the Request a Quote form on this page to request PIC16F1455-E/P pricing, current inventory, minimum order quantity, and lead time. The manufacturer lists the PIC16F1455 family as an active product, while real-time distributor inventory can fluctuate by package and temperature code. Providing the exact 14-pin PDIP ordering code avoids confusion with surface-mount or other temperature-grade variants.
What is the lead time for PIC16F1455-E/P?
Current lead time for PIC16F1455-E/P should be requested through the Request a Quote form on this page because stock and delivery timing vary with order volume and market conditions. The manufacturer lists the PIC16F1455 family as active, but active status does not guarantee immediate inventory for every package suffix. Include your requested quantity and target delivery date in the quote request.
Is PIC16F1455-E/P in stock and what does it cost?
Request current PIC16F1455-E/P availability and a delivered quotation through the Request a Quote form on this page. Live inventory can change between transactions, and pricing depends on quantity, packaging, and order timing. Use the exact MPN PIC16F1455-E/P when requesting a quote so the 14-pin PDIP, extended-temperature configuration is quoted correctly.

Data referensi kejuruteraan untuk PIC16F1455-E/P — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose PIC16F1455-E/P when the design needs an 8-bit USB controller with a 48 MHz clock, 14 KB of Flash, 1024 bytes of RAM, and a 14-pin PDIP footprint, particularly when the extended-temperature grade is required. PIC16F1455-I/P is the most direct substitution because the core device and package remain the same; select it when its industrial temperature range covers the application. The other PIC16F145x alternatives share the family and package style but may differ in program memory, RAM, USB capability, and peripheral configuration, so they are suitable only after a complete pin, firmware, and BOM review. No verified cross-manufacturer drop-in equivalent was identified for this ordering code, meaning a non-Microchip MCU should not be treated as a direct replacement without validating every multiplexed function and electrical requirement.

Perbandingan dengan Gantian

Parametr Produk Ini PIC16F1455-I/P PIC16F1454-I/P PIC16F1456-I/P PIC16F1457-I/P PIC16F1459-I/P
Package 14-pin PDIP 14-pin PDIP - same 14-pin PDIP - same 14-pin PDIP - same 14-pin PDIP - same 14-pin PDIP - same
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Processor Architecture 8-bit PIC16 RISC 8-bit PIC16 RISC 8-bit PIC16 RISC 8-bit PIC16 RISC 8-bit PIC16 RISC 8-bit PIC16 RISC
Maximum Clock Frequency 48 MHz 48 MHz 48 MHz 48 MHz 48 MHz 48 MHz
Temperature Grade Extended temperature Industrial temperature Industrial temperature Industrial temperature Industrial temperature Industrial temperature

Penyeberangsung Jelas

  • Direct family match with a different temperature grade (vsPIC16F1455-I/P)
  • Integrated USB 2.0 in a through-hole controller package (vsPIC16F1454-I/P)
  • Extended-temperature ordering option for wider environmental coverage (vsPIC16F1455-I/P)
  • 48 MHz performance with 12 I/O pins in a 14-pin PDIP (vsPIC16F1454-I/P)

Catatan Desain

Treat the USB data pins and programming pins as a combined constraint during PCB layout. The family documentation identifies an alternative in-circuit programming pair multiplexed with USB D- and D+, so the chosen operating voltage can restrict how programming is performed. Place the USB connector, protection components, programming connector, and decoupling capacitors close to their associated pins, and follow the reference layout in the manufacturer documentation.

Design the 3.3 V to 5 V supply path for both USB attachment and peripheral operation. Use short, low-impedance supply and ground connections, place the required bypass capacitance at the device pins, and account for USB bus current and any attached sensor load. Check the electrical-characteristics table for operating and programming voltage combinations before selecting a regulator, USB power source, or level-shifting arrangement.

Do not approve a family member as a substitute solely because it uses a 14-pin PDIP footprint. Confirm the exact program-memory size, RAM requirement, USB function block, oscillator options, peripheral assignments, and every reused pin. For PIC16F1455-I/P versus PIC16F1455-E/P, verify that the industrial temperature range covers the design environment; for other family members, firmware changes may be required.

Avoid beginning firmware development before checking the configuration settings. The 14 KB Flash limit constrains USB descriptors, boot code, application code, and calibration data, while 1024 bytes of RAM limits buffer depth and stack headroom. Review the linker map after adding USB stacks or logging, and use the manufacturer's low-voltage programming procedure when the shared USB and programming pins are active.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

The family is described as automotive, but no explicit AEC-Q100 qualification statement or environmental-compliance declaration was present in the retrieved product information. Verify these requirements with Microchip before releasing a production design.

Pencarian Berhubungan

pic16f1455 datasheet pic16f1455 microcontroller pic16f1455 programming pic16f1455 pdf pic16f1455 usb PIC16F1455-E/P datasheet PIC16F1455-E/P pinout PIC16F1455-E/P equivalent PIC16F1455-E/P replacement PIC16F1455-E/P vs PIC16F1455-I/P PIC16F1455 48MHz 14KB flash PIC16F1455 14-pin PDIP PIC16F1455 USB sensor interface PIC16F1455-E/P price Microchip PIC16F1455-E/P

Komponen dan Tanda berkaitan

Microchip Technology PIC16F1455 PIC16F1455-E/P PIC16F1455-I/P PIC16F1454-I/P PIC16F1456-I/P PIC16F1457-I/P PIC16F1459-I/P PIC16 8-bit RISC microcontroller USB 2.0 flash program memory static RAM 48 MHz system clock in-circuit serial programming ICSP low-voltage programming 14-pin PDIP through-hole package industrial control USB sensor interface USB data acquisition automotive accessory interface PIC16F1459 family
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ