PIC16F1455-E/P - 48MHz 8-Bit USB Microcontroller | Microchip
MPN: PIC16F1455-E/P ✓ فعالPIC16F1455-E/P جائزہ
A PIC16F1455 microcontroller belongs to the 8-bit RISC microcontroller category, which sits within the broader embedded-controller and semiconductor hierarchy. Unlike a general-purpose processor, it integrates flash program memory, RAM, oscillators, timers, serial interfaces, and USB support into one device. This integration allows compact USB-connected instruments, control modules, and data-acquisition nodes to operate without a separate external memory or interface controller.
The device's headline characteristics are its 48 MHz operating frequency, 14 KB of Flash memory, and 1024 bytes of RAM. The 14-pin PDIP package provides a through-hole footprint suited to prototyping, legacy industrial boards, and designs assembled through-hole. Its 12 I/O pins support digital control and serial-interface functions, while the integrated USB 2.0 interface reduces the external circuitry needed for direct USB connectivity.
PIC16F1455 devices use the PIC16 enhanced mid-range RISC architecture and combine programmable Flash with integrated USB capability. The 14 KB program memory is organized as 8K by 14 bits according to the product listing, providing dedicated storage for firmware. The 48 MHz clock capability supports faster control-loop execution and responsive USB servicing than entry-level PIC16 devices operating at lower clock rates.
Typical applications include USB-connected sensor interfaces, compact industrial controllers, USB-to-serial protocol bridges, laboratory data-acquisition equipment, and automotive accessory modules. The 14-pin PDIP footprint is particularly useful where a through-hole prototype or repairable controller assembly is preferred over a fine-pitch surface-mount package.
Designers should verify the USB D+ and D- pin multiplexing, programming requirements, and supply-voltage limits against the manufacturer's pin-description and electrical-characteristics tables. USB interface pins that are also used for in-circuit programming have voltage restrictions, so programming setup must be checked before a 5 V operating rail is connected.
کے لیے ڈراپ اِن متبادل PIC16F1455-E/P — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں PIC16F1455-E/P (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Package, Mounting Type, Program Memory Size, USB Interface, USB Module.
PIC16F1455-I/P
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC16F1454-I/P
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC16F1456-I/P
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
PIC16F1457-I/P
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
PIC16F1459-I/P
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC16F1455-E/P زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Product Type | 8-bit Flash Microcontroller |
| Architecture | PIC16 RISC |
| زیادہ سے زیادہ کلاک فریکوئنسی | 48 MHz |
| Program Memory Size | 14 KB (8K x 14 bits) |
| Program Memory Type | Flash |
| RAM Size | 1024 bytes |
| Data EEPROM Size | 0 bytes |
| I/O Pin Count | 12 pins |
| USB Interface | USB 2.0 |
| Supply Voltage Range | 3.3 V to 5 V |
| پیکیج | 14-pin PDIP |
| ماؤنٹنگ ٹائپ | Through-hole |
| Temperature Grade | Extended temperature |
| Automotive Qualification | Automotive |
| پن کی تعداد | 14 pins |
PIC16F1455-E/P پن کنفیگریشن
| پن 1 | MCLR/VPP — Master clear and programming voltage input |
| پن 2 | RA0 — Port A digital input/output |
| پن 3 | RA1 — Port A digital input/output |
| پن 4 | RA2 — Port A digital input/output |
| پن 5 | RA3 — Port A digital input/output |
| پن 6 | RA5/OSC1 — Port A input and oscillator input function |
| پن 7 | OSC2/RA4 — Oscillator output and port A input/output function |
| پن 8 | VDD — Positive supply voltage |
| پن 9 | VSS — Ground reference |
| پن 10 | RB0 — Port B digital input/output |
| پن 11 | RB1 — Port B digital input/output |
| پن 12 | RB2 — Port B digital input/output |
| پن 13 | RB3 — Port B digital input/output |
| پن 14 | RB4 — Port B digital input/output |
عام استعمالات
PIC16F1455-E/P کے لیے موزوں ہے 6 ایپلیکیشنs: USB Connected Sensor Interface, USB-to-Serial Protocol Bridge, Compact Industrial Control Module, USB Data Acquisition Controller, Automotive Accessory Interface, USB-Enabled Programmable Control Board.
USB Connected Sensor Interface
The PIC16F1455-E/P suits compact sensor-interface modules because its 48 MHz clock provides responsive firmware execution, its 14 KB of Flash holds application and USB routines, and its integrated USB 2.0 interface removes the need for a separate USB controller. The 12 available I/O pins can handle digital sensors, status indicators, and control signals. A host can enumerate the module as a dedicated USB device while the microcontroller performs local sampling and configuration. When analog signals are required, confirm the ADC channel count and resolution in the manufacturer datasheet before assigning the analog inputs.
تجویز کردہ
USB-to-Serial Protocol Bridge
The PIC16F1455-E/P can implement a USB-to-serial bridge when a host computer must communicate with legacy serial equipment. Its 48 MHz system clock supports responsive command processing, while 1024 bytes of RAM and 14 KB of Flash provide space for USB descriptors, framing logic, and protocol translation. The integrated USB 2.0 peripheral handles enumeration and data transfer while the remaining I/O pins support the serial side. Firmware must reconcile USB and legacy-port timing, and the serial-interface pin mapping should be confirmed from the device pin table.
تجویز کردہ
Compact Industrial Control Module
The PIC16F1455-E/P is appropriate for small industrial controllers that need deterministic control logic, USB connectivity, and through-hole assembly. The 48 MHz maximum clock and PIC16 RISC architecture allow efficient loop execution, while 12 I/O pins support relays, digital sensors, and machine-state inputs. Its 14-pin PDIP format simplifies inspection and replacement on legacy-style boards. Design the supply rails for the USB-connected operating environment, provide the required bypass capacitance, and use the extended-temperature ordering code when ambient conditions exceed the industrial-temperature range.
تجویز کردہ
USB Data Acquisition Controller
The PIC16F1455-E/P can serve as the central controller in a compact USB data-acquisition system. Its 48 MHz clock supports sampling control, the 14 KB Flash accommodates acquisition firmware and configuration tables, and 1024 bytes of RAM provides working space for buffering and protocol handling. USB 2.0 allows the controller to connect directly to a computer without an external bridge. For continuous acquisition, evaluate the available ADC performance, timer resources, and data-buffer depth against the required sample rate; those values are defined in the manufacturer's electrical-characteristics and peripheral sections.
تجویز کردہ
Automotive Accessory Interface
The PIC16F1455-E/P can be used in automotive accessory and service interfaces where USB provides a maintenance or configuration link while the microcontroller handles local vehicle-related logic. The extended-temperature ordering code, 48 MHz clock, and integrated USB 2.0 support combine compact control capability with a useful service interface. Its 14-pin PDIP package is practical for prototypes and ruggedized through-hole modules. Automotive use requires more than the -E designation: verify the exact AEC-Q100 qualification status, transient immunity, supply limits, and applicable automotive validation requirements with Microchip.
تجویز کردہ
USB-Enabled Programmable Control Board
The PIC16F1455-E/P is well suited to a programmable control board that is configured from a USB-connected host. The 48 MHz processor can execute real-time control algorithms, while 14 KB of Flash and 1024 bytes of RAM provide resources for configuration tables, state logic, and a USB command interface. Through-hole assembly in the 14-pin PDIP package makes the board easy to prototype and hand-solder. Plan the USB connector, data-line routing, programming access, and supply conditioning together because the programming and USB functions share pin resources.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا PIC16F1455-E/P — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | PIC16F1455-I/P | PIC16F1454-I/P | PIC16F1456-I/P | PIC16F1457-I/P | PIC16F1459-I/P |
|---|---|---|---|---|---|---|
| Package | 14-pin PDIP | 14-pin PDIP - same | 14-pin PDIP - same | 14-pin PDIP - same | 14-pin PDIP - same | 14-pin PDIP - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Processor Architecture | 8-bit PIC16 RISC | 8-bit PIC16 RISC | 8-bit PIC16 RISC | 8-bit PIC16 RISC | 8-bit PIC16 RISC | 8-bit PIC16 RISC |
| Maximum Clock Frequency | 48 MHz | 48 MHz | 48 MHz | 48 MHz | 48 MHz | 48 MHz |
| Temperature Grade | Extended temperature | Industrial temperature | Industrial temperature | Industrial temperature | Industrial temperature | Industrial temperature |
اہم امتیازی خصوصیات
- Direct family match with a different temperature grade (بمقابلہPIC16F1455-I/P)
- Integrated USB 2.0 in a through-hole controller package (بمقابلہPIC16F1454-I/P)
- Extended-temperature ordering option for wider environmental coverage (بمقابلہPIC16F1455-I/P)
- 48 MHz performance with 12 I/O pins in a 14-pin PDIP (بمقابلہPIC16F1454-I/P)
ڈیزائن نوٹس
Treat the USB data pins and programming pins as a combined constraint during PCB layout. The family documentation identifies an alternative in-circuit programming pair multiplexed with USB D- and D+, so the chosen operating voltage can restrict how programming is performed. Place the USB connector, protection components, programming connector, and decoupling capacitors close to their associated pins, and follow the reference layout in the manufacturer documentation.
Design the 3.3 V to 5 V supply path for both USB attachment and peripheral operation. Use short, low-impedance supply and ground connections, place the required bypass capacitance at the device pins, and account for USB bus current and any attached sensor load. Check the electrical-characteristics table for operating and programming voltage combinations before selecting a regulator, USB power source, or level-shifting arrangement.
Do not approve a family member as a substitute solely because it uses a 14-pin PDIP footprint. Confirm the exact program-memory size, RAM requirement, USB function block, oscillator options, peripheral assignments, and every reused pin. For PIC16F1455-I/P versus PIC16F1455-E/P, verify that the industrial temperature range covers the design environment; for other family members, firmware changes may be required.
Avoid beginning firmware development before checking the configuration settings. The 14 KB Flash limit constrains USB descriptors, boot code, application code, and calibration data, while 1024 bytes of RAM limits buffer depth and stack headroom. Review the linker map after adding USB stacks or logging, and use the manufacturer's low-voltage programming procedure when the shared USB and programming pins are active.
تعمیل کی معلومات
The family is described as automotive, but no explicit AEC-Q100 qualification statement or environmental-compliance declaration was present in the retrieved product information. Verify these requirements with Microchip before releasing a production design.