PIC16F726-I/MV - 8-Bit 20MHz MCU | Microchip Technology
MPN: PIC16F726-I/MV ✓ AktifPIC16F726-I/MV Ringkasan
Pilihan pengganti yang segera untuk PIC16F726-I/MV — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera PIC16F726-I/MV (sama faktor bentuk dan kaki) — berbeza dalam ADC, Package, Communication, Timers, Operating Temperature.
PIC16F726-E/MV
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →PIC16F726T-I/MV
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →PIC16F726-I/MV Penilaian maksimum & Ciri-ciri Elektrik
| Microcontroller Type | 8-bit Flash PIC microcontroller |
| Maximum Operating Frequency | 20 MHz |
| Program Memory | 14 KB Flash (8K x 14 words) |
| Data Memory | 368 x 8 bits RAM |
| Operating Voltage Range | 1.8 V to 5.5 V |
| ADC | 1 ADC |
| Capture/Compare/PWM | CCP peripheral |
| Serial Interfaces | I2C and SPI |
| Kemasan | 28-pin UQFN (4x4 mm) |
| Architecture | PIC RISC, 8-bit |
| Instruction Set | 35 single-word instructions |
| Jenis Pemasangan | Surface Mount |
| Low-Power Technology | nanoWatt XLP technology |
| Device Family | PIC16 family |
| Temperature Grade | Industrial grade, -I designation |
Panduan Konfigurasi Pin PIC16F726-I/MV 28-pin uqfn (4x4 mm)
Konfigurasi pin untuk PIC16F726-I/MV (28-pin uqfn (4x4 mm) pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.
Tiada data garisan pin yang diperoleh untuk PIC16F726-I/MV.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
PIC16F726-I/MV patut untuk 6 aplikasis: Industrial Sensor Controller, Low-Voltage IoT Sensor Node, Battery-Powered Data Logger, Motor and Actuator Control, Consumer Interface and Control Module, Communications Protocol Bridge.
Industrial Sensor Controller
The PIC16F726-I/MV fits compact sensor controllers that must operate from 1.8 V to 5.5 V while handling analog measurement and digital sensor communication. Its ADC supports analog inputs, while I2C and SPI provide flexible links to sensors, transceivers, and memory devices. The 20 MHz operating speed gives firmware enough headroom for filtering, calibration, state management, and communication protocol handling. The 28-pin UQFN package also reduces board area compared with larger leaded packages, making it useful in densely populated industrial instrumentation. Design the front end around the selected ADC input range, provide local bypass capacitors, and confirm that the operating temperature grade matches the deployment environment.
Disebarkan
Low-Voltage IoT Sensor Node
The PIC16F726-I/MV is suitable for a low-power IoT sensor node built around a 1.8 V to 5.5 V rail. Its PIC16 XLP family background supports low-power design, while the ADC can acquire battery, temperature, or environmental sensor information. I2C and SPI allow the controller to connect to compact sensors or a short-range radio without consuming a large pin count. The 14 KB Flash capacity is appropriate for wake routines, sensor compensation, protocol framing, and data buffering. In a duty-cycled design, firmware should disable unused peripherals and use the appropriate sleep mode between measurements. Battery life will depend on sensor load, radio activity, wake frequency, and regulator efficiency rather than microcontroller rating alone.
Disebarkan
Battery-Powered Data Logger
The PIC16F726-I/MV can serve as the control and data-processing device in a battery-powered logger because it supports operation down to 1.8 V and includes 368 bytes of RAM. The 14 KB Flash provides room for acquisition control, timestamps, event logging, and configuration storage. A typical implementation would wake at scheduled intervals, use the ADC to sample a sensor, format a record through I2C or SPI, and return to a low-power state. Its compact 4 x 4 mm UQFN footprint helps minimize board size in portable equipment. For nonvolatile records, add external serial EEPROM or Flash and account for its standby current. Firmware should also define safe behavior for low-battery conditions and unexpected sensor communication failures.
Disebarkan
Motor and Actuator Control
The PIC16F726-I/MV is appropriate for small motor, valve, and actuator controllers where timing, feedback, and serial diagnostics are needed in a compact controller. The CCP peripheral supports precise timing-related functions, while the 20 MHz processor speed allows control logic, debouncing, position tracking, and fault reporting to share one device. I2C can connect to sensors or digital power components, and SPI can support higher-throughput peripherals. The 1.8 V to 5.5 V range permits operation from low-voltage or multi-rail systems when suitable motor drivers and interfaces are used. Keep switching transients away from sensitive ADC and clock paths, and use external driver circuitry for loads that exceed microcontroller pin capabilities.
Disebarkan
Consumer Interface and Control Module
The PIC16F726-I/MV is useful in compact consumer control modules that combine button or knob input, status indication, analog sensing, and serial communication. Its 28-pin UQFN package supports dense PCB layouts, while the ADC, CCP, I2C, and SPI peripherals reduce the need for external interface components. The 14 KB Flash is suitable for user-interface state machines, indicator timing, configuration handling, and communication protocols. A design may use CCP for precise timing or PWM-related output while I2C connects to an expander or display controller. Firmware should include input debouncing and communication error recovery. Because consumer products may use compact supply voltages, the complete circuit should be checked across the device's 1.8 V to 5.5 V operating range.
Disebarkan
Communications Protocol Bridge
The PIC16F726-I/MV can act as a small protocol bridge when one system needs to translate between local sensor or controller data and a host interface. I2C and SPI provide dedicated serial connectivity, while the 20 MHz CPU can handle framing, checksums, command parsing, and response generation alongside general control functions. The compact 28-pin UQFN package is advantageous in embedded modules where connector and component space are constrained. A typical circuit would terminate one serial bus at an external transceiver, run the bridge firmware on the PIC16F726, and expose configuration through another interface. Firmware should include timeout handling, CRC or parity checks where required, and deterministic reset behavior to prevent lockups in the communication path.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk PIC16F726-I/MV — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | PIC16F726-E/MV | PIC16F726T-I/MV |
|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 28-pin UQFN (4x4 mm) | 28-pin UQFN (4x4 mm) | 28-pin UQFN (4x4 mm) |
| Architecture | 8-bit PIC RISC | 8-bit PIC RISC | 8-bit PIC RISC |
| Maximum Frequency | 20 MHz | 20 MHz | 20 MHz |
| Program Memory | 14 KB Flash | 14 KB Flash | 14 KB Flash |
| RAM | 368 x 8 bits | 368 x 8 bits | 368 x 8 bits |
| Supply Voltage | 1.8 V to 5.5 V | 1.8 V to 5.5 V | 1.8 V to 5.5 V |
| ADC | 1 ADC | 1 ADC | 1 ADC |
| Peripheral Highlights | CCP, I2C, SPI | CCP, I2C, SPI | CCP, I2C, SPI |
| Ordering-Code Difference | PIC16F726-I/MV | E temperature-grade code | T ordering suffix |
Penyeberangsung Jelas
- Exact 28-pin UQFN footprint with low-voltage operation (vsPIC16F726-E/MV)
- 20 MHz processing with integrated serial connectivity (vsPIC16F726T-I/MV)
- Compact 14 KB Flash MCU in a 4 x 4 mm package (vsPIC16F726-E/MV)
Catatan Desain
Use the manufacturer 28-pin UQFN land pattern and exposed-pad thermal design rather than adapting a generic QFN footprint. Confirm pad dimensions, pitch, solder-mask clearance, and stencil thickness against the PIC16F726 package drawing. The 4 x 4 mm package has limited assembly tolerance, so verify the PCB design rule, placement orientation, and reflow profile before releasing production artwork.
Design the power rail for the complete 1.8 V to 5.5 V operating range and include local bypass capacitance at the device supply pins as specified by the manufacturer application guidance. Because low-voltage operation is a principal feature, evaluate regulator dropout, startup behavior, and transient margin at the lowest supply condition. Decouple analog and digital sections appropriately, and route return currents away from sensitive measurement paths.
Keep the 20 MHz clock path short and isolated from I2C, SPI, and ADC inputs. Place the decoupling capacitor close to the supply pin, provide a clean ground reference near the exposed pad, and avoid routing communication traces beneath the MCU unless the stackup and return path have been reviewed. For analog measurements, use a quiet reference point and separate high-current switching returns from the sensor ground path.
Do not confuse the 28-pin PIC16F726 UQFN device with the 20-pin or 44-pin members of the family. Confirm that the firmware target and development board correspond to the 28-pin package and that all required I/O, power, programming, and exposed-pad connections are present. Also verify the selected temperature-grade suffix before using a different PIC16F726 ordering code in an industrial or extended-temperature design.
Maklumat Kesediaan
The manufacturer product page recommends automotive-design resources for PIC16F726, but the exact compliance declarations for PIC16F726-I/MV were not present in the cited product and distributor snippets. No compliance status has been assumed.