Microchip Technology

PIC16F726-I/MV - 8-Bit 20MHz MCU | Microchip Technology

MPN: PIC16F726-I/MV ✓ Nakahanda
1.8 V to 5.5 V Vdss 28-pin UQFN (4x4 mm) Package 20 MHz Speed 14 KB Flash (8K x 14 words) Memory
MOQ: 1 |

PIC16F726-I/MV Ulas

The Microchip Technology PIC16F726-I/MV is an 8-bit PIC microcontroller with 20 MHz maximum operating frequency, 14 KB of Flash program memory organized as 8K x 14 words, and 368 bytes of RAM, housed in a 28-pin UQFN (4x4 mm) package. The device operates from 1.8 V to 5.5 V and includes ADC, CCP, I2C, and SPI peripherals. Its -I temperature-grade designation indicates an industrial-temperature option, while the /MV package suffix identifies the 28-pin UQFN package. The PIC16F726 belongs to the PIC16 family of low-power CMOS Flash microcontrollers and is supported by Microchip's PIC XLP technology for applications requiring low standby-current performance. Compared with larger general-purpose microcontrollers, this device provides a compact combination of Flash memory, RAM, serial interfaces, conversion capability, and a small surface-mount footprint. The 28-pin UQFN package is suitable for compact embedded control boards, sensor modules, industrial controllers, and consumer products where a traditional large-lead package would be unnecessary. Its 8-bit architecture and 20 MHz operating speed make it appropriate for control logic, signal acquisition, communication bridging, and low-to-moderate processing workloads. The device includes a 10-bit ADC according to the family comparison information, while the supplied listing identifies an ADC generally. For firmware development, engineers should use the PIC16F726 family data sheet and the appropriate Microchip development toolchain to confirm peripheral configuration, clocking, programming, and package-specific pin assignments. This product page summarizes the manufacturer and distributor information for the exact PIC16F726-I/MV ordering code and emphasizes the 20 MHz speed, 14 KB Flash memory, low-voltage operation, and 28-pin UQFN footprint.

Mga alternatibo na pwedeng ilagay na PIC16F726-I/MV — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

Variante sa Seri na ito

Katulad na modelo sa serye na katugma sa pagpasok PIC16F726-I/MV (parehas na form factor at footprint) — pagkakaiba sa ADC, Package, Communication, Timers, Operating Temperature.

Microchip Technology
ADC: 11-channel, 8-bit
Package: UQFN-28 (MV) 4x4 mm
Communication: EUSART, MSSP (SPI / I2C)
Microchip Technology
ADC: 14-channel, 8-bit
Package: 40-pin UQFN with exposed pad (MV)
Communication: MSSP (SPI/I2C), EUSART
Microchip Technology
ADC: 8-bit, up to 12 channels
Package: 28-pin UQFN (MV) with exposed pad
Timers: Timer0, Timer1, Timer2 (family typical)
Microchip Technology
ADC: 8-bit, 14 channels
Package: 28-SOIC (0.300 inch / 7.50 mm width)
Communication: EUSART, MSSP (SPI / I2C)
Microchip Technology
ADC: 8-channel, 8-bit
Package: 28-pin UQFN (4x4 mm) with exposed pad
Communication: USART, MSSP (SPI / I2C)
Microchip Technology
ADC: 12-bit, up to 14 channels
Package: 40-pin UQFN (5x5 mm) with exposed pad
Communication: UART/USART, I2C, SPI
Microchip Technology
ADC: 8-bit, 14 channels
Package: 40-pin UQFN (5x5 mm) with Exposed Pad
Communication: 1x EUSART, 1x MSSP (SPI / I2C)

PIC16F726-E/MV

✅ Drop-In
Microchip Technology
📦 28-pin UQFN (4x4 mm)
PIC16 enhanced mid-range 8-bit RISC · 14-bit · 14 KB (8K x 14 words) · 368 bytes · 256 bytes · 20 MHz · 1.8 V to 5.5 V · 8-bit, up to 12 channels

Magkontak para sa presyo

Tingnan ang Datasheet →

PIC16F726T-I/MV

✅ Drop-In
Microchip Technology
📦 28-pin UQFN (4x4 mm)
PIC16 8-bit RISC (mid-range, 14-bit instruction width) · 14 KB Flash (8K x 14 words) · 20 MHz (200 ns instruction cycle) · 2.5 V to 5.5 V · 368 bytes · Up to 36 (package-dependent; 25 in 28-UQFN) · 8-channel, 8-bit · 28-pin UQFN (4x4 mm) with exposed pad

Magkontak para sa presyo

Tingnan ang Datasheet →

PIC16F726-I/MV Mga Pinakamataas na Rating at Electrical Characteristics

Microcontroller Type 8-bit Flash PIC microcontroller
Maximum Operating Frequency 20 MHz
Program Memory 14 KB Flash (8K x 14 words)
Data Memory 368 x 8 bits RAM
Operating Voltage Range 1.8 V to 5.5 V
ADC 1 ADC
Capture/Compare/PWM CCP peripheral
Serial Interfaces I2C and SPI
Packhaging 28-pin UQFN (4x4 mm)
Architecture PIC RISC, 8-bit
Instruction Set 35 single-word instructions
Uri ng Pagpapasok Surface Mount
Low-Power Technology nanoWatt XLP technology
Device Family PIC16 family
Temperature Grade Industrial grade, -I designation

Gabay sa Pin Configuration ng PIC16F726-I/MV 28-pin uqfn (4x4 mm)

Pin configuration para sa PIC16F726-I/MV (28-pin uqfn (4x4 mm) package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.

Pinout diagram ng 28-pin uqfn (4x4 mm) package para sa PIC16F726-I/MV

Wala ng detalyadong pinout data na magagamit para sa PIC16F726-I/MV.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

PIC16F726-I/MV ay nararapat para sa 6 aplikasyons: Industrial Sensor Controller, Low-Voltage IoT Sensor Node, Battery-Powered Data Logger, Motor and Actuator Control, Consumer Interface and Control Module, Communications Protocol Bridge.

🏭

Industrial Sensor Controller

The PIC16F726-I/MV fits compact sensor controllers that must operate from 1.8 V to 5.5 V while handling analog measurement and digital sensor communication. Its ADC supports analog inputs, while I2C and SPI provide flexible links to sensors, transceivers, and memory devices. The 20 MHz operating speed gives firmware enough headroom for filtering, calibration, state management, and communication protocol handling. The 28-pin UQFN package also reduces board area compared with larger leaded packages, making it useful in densely populated industrial instrumentation. Design the front end around the selected ADC input range, provide local bypass capacitors, and confirm that the operating temperature grade matches the deployment environment.

🧩

Low-Voltage IoT Sensor Node

The PIC16F726-I/MV is suitable for a low-power IoT sensor node built around a 1.8 V to 5.5 V rail. Its PIC16 XLP family background supports low-power design, while the ADC can acquire battery, temperature, or environmental sensor information. I2C and SPI allow the controller to connect to compact sensors or a short-range radio without consuming a large pin count. The 14 KB Flash capacity is appropriate for wake routines, sensor compensation, protocol framing, and data buffering. In a duty-cycled design, firmware should disable unused peripherals and use the appropriate sleep mode between measurements. Battery life will depend on sensor load, radio activity, wake frequency, and regulator efficiency rather than microcontroller rating alone.

🔋

Battery-Powered Data Logger

The PIC16F726-I/MV can serve as the control and data-processing device in a battery-powered logger because it supports operation down to 1.8 V and includes 368 bytes of RAM. The 14 KB Flash provides room for acquisition control, timestamps, event logging, and configuration storage. A typical implementation would wake at scheduled intervals, use the ADC to sample a sensor, format a record through I2C or SPI, and return to a low-power state. Its compact 4 x 4 mm UQFN footprint helps minimize board size in portable equipment. For nonvolatile records, add external serial EEPROM or Flash and account for its standby current. Firmware should also define safe behavior for low-battery conditions and unexpected sensor communication failures.

🤖

Motor and Actuator Control

The PIC16F726-I/MV is appropriate for small motor, valve, and actuator controllers where timing, feedback, and serial diagnostics are needed in a compact controller. The CCP peripheral supports precise timing-related functions, while the 20 MHz processor speed allows control logic, debouncing, position tracking, and fault reporting to share one device. I2C can connect to sensors or digital power components, and SPI can support higher-throughput peripherals. The 1.8 V to 5.5 V range permits operation from low-voltage or multi-rail systems when suitable motor drivers and interfaces are used. Keep switching transients away from sensitive ADC and clock paths, and use external driver circuitry for loads that exceed microcontroller pin capabilities.

📱

Consumer Interface and Control Module

The PIC16F726-I/MV is useful in compact consumer control modules that combine button or knob input, status indication, analog sensing, and serial communication. Its 28-pin UQFN package supports dense PCB layouts, while the ADC, CCP, I2C, and SPI peripherals reduce the need for external interface components. The 14 KB Flash is suitable for user-interface state machines, indicator timing, configuration handling, and communication protocols. A design may use CCP for precise timing or PWM-related output while I2C connects to an expander or display controller. Firmware should include input debouncing and communication error recovery. Because consumer products may use compact supply voltages, the complete circuit should be checked across the device's 1.8 V to 5.5 V operating range.

🌐

Communications Protocol Bridge

The PIC16F726-I/MV can act as a small protocol bridge when one system needs to translate between local sensor or controller data and a host interface. I2C and SPI provide dedicated serial connectivity, while the 20 MHz CPU can handle framing, checksums, command parsing, and response generation alongside general control functions. The compact 28-pin UQFN package is advantageous in embedded modules where connector and component space are constrained. A typical circuit would terminate one serial bus at an external transceiver, run the bridge firmware on the PIC16F726, and expose configuration through another interface. Firmware should include timeout handling, CRC or parity checks where required, and deterministic reset behavior to prevent lockups in the communication path.

What is the operating voltage of PIC16F726-I/MV?
The PIC16F726-I/MV operates from 1.8 V to 5.5 V. According to the Mouser product listing for this exact MPN, the device is an 8-bit microcontroller with 14 KB of Flash memory and a 1.8 V to 5.5 V operating range. This range supports low-voltage battery-powered designs as well as conventional embedded systems, although the external components and firmware limits must be selected for the minimum and maximum rail conditions.
How much Flash memory does the PIC16F726-I/MV have?
The PIC16F726-I/MV provides 14 KB of Flash program memory, organized as 8K x 14 words. The DigiKey listing identifies the device as an 8-bit PIC microcontroller with 14 KB of Flash memory and 20 MHz maximum operating frequency. This memory size is suitable for embedded control firmware, protocol handlers, state machines, calibration routines, and moderate data-processing tasks.
What peripherals are available on the PIC16F726-I/MV?
The PIC16F726-I/MV includes an ADC, CCP peripheral, I2C, and SPI. The Mouser listing identifies the ADC, CCP, I2C, and SPI features, while the manufacturer product page identifies the device as part of the PIC16 XLP family. These peripherals allow the MCU to acquire analog signals, time or generate PWM events, and connect to sensors or external digital devices.
What package does PIC16F726-I/MV use?
The PIC16F726-I/MV uses a 28-pin UQFN package measuring 4 x 4 mm. The DigiKey listing specifies the package as 28-UQFN (4x4), and the Microchip product page identifies PIC16F726 as a 28-pin device. Because UQFN packages have fine-pitch leads and an exposed thermal pad, the PCB footprint, land pattern, solder stencil, and assembly process must be checked against the manufacturer package drawing.
Where can I download the PIC16F726 datasheet PDF?
The PIC16F726 datasheet is available through the official Microchip product page for PIC16F726. The manufacturer page links the PIC16 (L)F722/3/4/6/7 Data Sheet, and the verified listing at all-datasheet provides an additional PDF access point. Use the manufacturer document for authoritative pin assignments, electrical limits, timing, programming, and package drawings.
Where can I find the PIC16F726-I/MV pinout?
The PIC16F726-I/MV pinout is found in the pin-description and package-drawing sections of the manufacturer PIC16 (L)F722/3/4/6/7 Data Sheet. The exact device is a 28-pin UQFN package, so use the 28-pin pinout and the corresponding 4 x 4 mm land pattern. Do not substitute the pinout of the 20-pin or 44-pin members of the family.
What is the maximum clock frequency of PIC16F726-I/MV?
The PIC16F726-I/MV has a maximum operating frequency of 20 MHz. The DigiKey listing for the exact ordering code identifies the PIC16F726 as an 8-bit microcontroller rated up to 20 MHz. Actual timing still depends on the selected oscillator, clock configuration, peripheral settings, and operating voltage in the final firmware configuration.
Is PIC16F726-I/MV suitable for low-power applications?
The PIC16F726-I/MV is suitable for low-power applications because it belongs to the PIC16 XLP family and supports operation down to 1.8 V. The manufacturer identifies the family as an Extreme Low Power MCU family featuring nanoWatt XLP technology. The final battery life depends on the selected sleep mode, oscillator, peripheral activity, and duty cycle.
Where can I buy PIC16F726-I/MV online?
Use the Request a Quote form on this page to request PIC16F726-I/MV availability, pricing, and lead time from XAIPART. The verified listings identify the exact MPN at major distributors, but availability and commercial terms can change. Submit the required quantity, target package, and delivery location with the quote request for current sourcing.
What is the price of PIC16F726-I/MV?
The current price of PIC16F726-I/MV is determined by quantity, availability, and delivery requirements and is shown through the XAIPART Request a Quote form. The verified product listings contain pricing and availability links but do not provide a stable current unit-price table. Request a quote on this page rather than relying on an outdated catalog price.
Is PIC16F726-I/MV in stock and what is its lead time?
The verified distributor listings indicate that PIC16F726-I/MV is actively offered, while one listing reports a temporary stock condition. Current stock and lead time must be confirmed through the XAIPART Request a Quote form. Include the required quantity and delivery schedule so the sourcing response reflects the current supplier position rather than a historical listing.
What is the best drop-in replacement for PIC16F726-I/MV?
PIC16F726-E/MV is the closest same-package alternative identified for the PIC16F726-I/MV. It retains the 28-pin UQFN package and the same PIC16F726 device family, but its temperature-grade ordering code differs. Verify the temperature range, clock, memory, and peripheral requirements in the manufacturer datasheet before approving a replacement.
Can PIC16F726-E/MV replace PIC16F726-I/MV?
PIC16F726-E/MV can serve as a package-compatible alternative for PIC16F726-I/MV, with the principal distinction being the temperature-grade code. Both are listed as 28-pin UQFN PIC16F726 devices, and the comparison data identifies the same 8-bit architecture, 20 MHz speed, and 368 x 8-bit RAM. Confirm the required industrial or extended temperature range before substitution.
When should I choose PIC16F726-I/MV instead of another 8-bit MCU?
Choose PIC16F726-I/MV when the design needs 14 KB of Flash, 20 MHz operation, 1.8 V to 5.5 V operation, and integrated ADC, CCP, I2C, and SPI functions in a compact 28-pin UQFN. It is particularly appropriate for compact low-voltage controllers where the 8-bit PIC architecture and nanoWatt XLP family features reduce firmware and hardware complexity.
What are the key specifications of PIC16F726-I/MV that engineers should know?
The key specifications are an 8-bit PIC RISC architecture, 20 MHz maximum frequency, 14 KB Flash, 368 x 8-bit RAM, a 1.8 V to 5.5 V supply range, and a 28-pin 4 x 4 mm UQFN package. The device also provides an ADC, CCP, I2C, and SPI. According to the manufacturer product page and the exact-MPN distributor listings, these features place it in the low-power PIC16 Flash MCU family.

Impormasyon ng Talumpati sa Engineering for PIC16F726-I/MV — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose PIC16F726-I/MV for compact 8-bit embedded designs that need 14 KB of Flash, 20 MHz processing, operation from 1.8 V to 5.5 V, and integrated ADC, CCP, I2C, and SPI interfaces in a 28-pin 4 x 4 mm UQFN package. Choose PIC16F726-E/MV when the same electrical and package configuration is needed with the E temperature-grade designation, after confirming that it meets the deployment temperature requirement. Choose PIC16F726T-I/MV when its ordering suffix satisfies the required production configuration while preserving the same package, memory, speed, and peripheral set. For all three choices, validate the exact temperature range, pin functions, programming requirements, exposed-pad layout, and lifecycle status against the manufacturer datasheet. None should be selected when the design requires a larger pin count, more Flash memory, or a different architecture, and no cross-brand drop-in alternative was established from the available cross-reference information.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto PIC16F726-E/MV PIC16F726T-I/MV
Brand Microchip Technology Microchip Technology Microchip Technology
Package 28-pin UQFN (4x4 mm) 28-pin UQFN (4x4 mm) 28-pin UQFN (4x4 mm)
Architecture 8-bit PIC RISC 8-bit PIC RISC 8-bit PIC RISC
Maximum Frequency 20 MHz 20 MHz 20 MHz
Program Memory 14 KB Flash 14 KB Flash 14 KB Flash
RAM 368 x 8 bits 368 x 8 bits 368 x 8 bits
Supply Voltage 1.8 V to 5.5 V 1.8 V to 5.5 V 1.8 V to 5.5 V
ADC 1 ADC 1 ADC 1 ADC
Peripheral Highlights CCP, I2C, SPI CCP, I2C, SPI CCP, I2C, SPI
Ordering-Code Difference PIC16F726-I/MV E temperature-grade code T ordering suffix

Pangunahing mga Pagkakaiba

  • Exact 28-pin UQFN footprint with low-voltage operation (kumpara saPIC16F726-E/MV)
  • 20 MHz processing with integrated serial connectivity (kumpara saPIC16F726T-I/MV)
  • Compact 14 KB Flash MCU in a 4 x 4 mm package (kumpara saPIC16F726-E/MV)

Talaan ng Disenyo

Use the manufacturer 28-pin UQFN land pattern and exposed-pad thermal design rather than adapting a generic QFN footprint. Confirm pad dimensions, pitch, solder-mask clearance, and stencil thickness against the PIC16F726 package drawing. The 4 x 4 mm package has limited assembly tolerance, so verify the PCB design rule, placement orientation, and reflow profile before releasing production artwork.

Design the power rail for the complete 1.8 V to 5.5 V operating range and include local bypass capacitance at the device supply pins as specified by the manufacturer application guidance. Because low-voltage operation is a principal feature, evaluate regulator dropout, startup behavior, and transient margin at the lowest supply condition. Decouple analog and digital sections appropriately, and route return currents away from sensitive measurement paths.

Keep the 20 MHz clock path short and isolated from I2C, SPI, and ADC inputs. Place the decoupling capacitor close to the supply pin, provide a clean ground reference near the exposed pad, and avoid routing communication traces beneath the MCU unless the stackup and return path have been reviewed. For analog measurements, use a quiet reference point and separate high-current switching returns from the sensor ground path.

Do not confuse the 28-pin PIC16F726 UQFN device with the 20-pin or 44-pin members of the family. Confirm that the firmware target and development board correspond to the 28-pin package and that all required I/O, power, programming, and exposed-pad connections are present. Also verify the selected temperature-grade suffix before using a different PIC16F726 ordering code in an industrial or extended-temperature design.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

The manufacturer product page recommends automotive-design resources for PIC16F726, but the exact compliance declarations for PIC16F726-I/MV were not present in the cited product and distributor snippets. No compliance status has been assumed.

Data napatotohanan sa: 2026-11-15 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

PIC16F726-I/MV PIC16F726-I/MV datasheet PIC16F726-I/MV datasheet pdf PIC16F726-I/MV pinout PIC16F726-I/MV UQFN-28 PIC16F726-I/MV price PIC16F726-I/MV stock PIC16F726-I/MV replacement PIC16F726-I/MV equivalent PIC16F726-I/MV vs PIC16F726-E/MV PIC16F726 20MHz 14KB flash PIC16F726 1.8V ADC CCP I2C SPI Microchip PIC16F726-I/MV PIC16F726-I/MV low power sensor controller PIC16F726-I/MV development board

Mga kaugnay na Mga Komponente at mga Tuntunin

Microchip Technology PIC16F726-I/MV PIC16F726 PIC16F726-E/MV PIC16F726T-I/MV PIC16 PIC XLP 8-bit microcontroller Flash microcontroller PIC RISC architecture nanoWatt XLP technology 28-pin UQFN UQFN package family surface mount SMD 1.8 V to 5.5 V operation 20 MHz operating frequency 14 KB Flash program memory 368 x 8-bit RAM ADC CCP peripheral I2C SPI low-power embedded control
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ