PIC24FJ32GP205-E/PT - 32MHz 16-bit USB MCU | Microchip
MPN: PIC24FJ32GP205-E/PT ✓ AktifPIC24FJ32GP205-E/PT Ringkasan
A PIC24FJ-series microcontroller is a 16-bit RISC-based embedded controller within the broader MCU and semiconductor hierarchy. It combines program Flash, data RAM, general-purpose I/O, timers, serial interfaces, and communication peripherals in one integrated device. The GP2/GU2 family is especially useful for portable and connected products because its core-independent peripherals can handle time-critical tasks while the main CPU performs application logic.
The PIC24FJ32GP205-E/PT provides 32 KB of ECC Flash, 8 KB of RAM, and 16 MIPS performance at 32 MHz according to Microchip Technology product and distributor information. Its Full Speed USB 2.0 capability supports USB host, device, or OTG roles at the family level. The eXtreme Low-Power architecture also offers sleep-current capability down to a few hundred nanoseconds while retaining complete RAM contents, making the device suitable for designs that spend substantial time in low-energy states.
The 48-pin TQFP package exposes the device's I/O and peripheral connections while supporting conventional surface-mount assembly. The PIC24 architecture's 16-bit instruction set provides more arithmetic and addressing capability than an 8-bit MCU without moving to a larger processor architecture. Core-independent peripherals, two-channel DMA capability, independent low-power timer resources, and programmable I/O improve responsiveness and reduce CPU intervention in data-acquisition and USB applications.
Typical uses include USB-connected data loggers, compact industrial control modules, battery-powered instrumentation, USB-to-serial equipment, sensor-hub controllers, and portable medical or diagnostic peripherals. For these applications, the combination of 32 KB ECC Flash, 8 KB RAM, Full Speed USB, and low-power sleep operation provides enough resources for protocol stacks, data buffering, control loops, and local configuration without requiring a separate USB interface controller.
Design around the device's electrical limits and connector requirements rather than treating USB as a universal interface. Apply the manufacturer pin descriptions when assigning USB, oscillator, programming, and power pins; place bypass capacitors close to their designated supply pins; and validate USB signal routing, impedance, grounding, and ESD protection on the assembled PCB. The -E grade and /PT package suffix should be checked against the product's temperature and assembly requirements before release.
This product page combines the manufacturer's device information with package, sourcing, replacement, and design guidance. It also distinguishes the verified extended-temperature industrial-temperature-grade option from the broader same-family alternatives, helping engineers confirm PCB reuse, temperature requirements, memory capacity, and USB functionality before committing a design to production.
Pilihan pengganti yang segera untuk PIC24FJ32GP205-E/PT — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera PIC24FJ32GP205-E/PT (sama faktor bentuk dan kaki) — berbeza dalam Package, USB, Mounting Type, RoHS Status, ADC.
PIC24FJ32GP205-I/PT
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
PIC24FJ64GP205-E/PT
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak DisahkanHubungi untuk harga
Lihat Datasheet →PIC24FJ64GP205-I/PT
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak DisahkanHubungi untuk harga
Lihat Datasheet →PIC24FJ64GU205-E/PT
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif rujukan (tidak dalam katalog)
PIC24FJ64GU205-I/PT
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak DisahkanHubungi untuk harga
Lihat Datasheet →PIC24FJ32GP205-E/PT Penilaian maksimum & Ciri-ciri Elektrik
| Product Type | 16-bit Flash Microcontroller |
| Maximum CPU Frequency | 32 MHz |
| CPU Performance | 16 MIPS |
| Program Memory | 32 KB ECC Flash |
| Program Memory Organization | 11K x 24 words |
| Data Memory | 8 KB RAM |
| USB Capability | Full Speed USB 2.0 Host/Device/OTG |
| Architecture | PIC24 16-bit |
| Power Management | eXtreme Low-Power (XLP) |
| Sleep Current | A few hundred nA while retaining complete RAM content |
| Kemasan | 48-pin TQFP, 7 mm x 7 mm |
| Jenis Pemasangan | Surface Mount |
| Temperature Grade | Extended temperature |
| DMA Channels | 2 channels |
| High-Current I/O | 18 mA source and 18 mA sink |
| Low-Power Timer Oscillator | 32 kHz independent low-power oscillator |
| Timer1 | 16-bit timer/counter with external crystal oscillator and A/D trigger capability |
| Status RoHS | Compliant |
Panduan Konfigurasi Pin PIC24FJ32GP205-E/PT 48-pin tqfp, 7 mm x 7 mm
Konfigurasi pin untuk PIC24FJ32GP205-E/PT (48-pin tqfp, 7 mm x 7 mm pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.
Tiada data garisan pin yang diperoleh untuk PIC24FJ32GP205-E/PT.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
PIC24FJ32GP205-E/PT patut untuk 6 aplikasis: USB Data Logger, Industrial Sensor Hub, Portable Medical Peripheral, USB-to-Serial Interface, Battery-Powered Sensor Node, USB Control Module.
USB Data Logger
The PIC24FJ32GP205-E/PT fits compact USB data loggers because it combines Full Speed USB 2.0 support with a 32 MHz, 16 MIPS core and 8 KB of RAM. The MCU can buffer sensor or system records, format data, and exchange files through a USB host or device port without a separate interface controller. Its eXtreme Low-Power behavior is particularly useful when the logger spends long intervals idle between acquisition sessions. The -E temperature-grade ordering option should be matched to the intended operating environment, while the 32 KB ECC Flash budget must include application code, configuration, and logging firmware.
Disebarkan
Industrial Sensor Hub
The PIC24FJ32GP205-E/PT is suitable for an industrial sensor hub that gathers readings from multiple peripherals and forwards them through USB. Its 16-bit architecture, 32 MHz clock, and 16 MIPS execution rate provide useful arithmetic and addressing performance for sampling logic, filtering, and protocol handling. Core-independent peripherals and the two-channel DMA capability can reduce CPU involvement during data movement. Designers should allocate the 8 KB RAM carefully, confirm the exact enabled pin functions in the 48-pin datasheet, and select external sensors or converters whose electrical interfaces match the available I/O and timing resources.
Disebarkan
Portable Medical Peripheral
The PIC24FJ32GP205-E/PT can control a portable medical peripheral that records measurements, manages a local interface, and periodically connects to a host over USB. The 32 KB ECC Flash supports compact firmware, while the 16-bit core and 32 MHz operating frequency help process control and data-formatting tasks. Low sleep current down to a few hundred nanoseconds, with RAM retention, supports battery-conscious operation. Medical designs still require application-specific risk controls, validation, isolation decisions, and compliance work that is separate from the MCU's component-level status.
Disebarkan
USB-to-Serial Interface
The PIC24FJ32GP205-E/PT is appropriate for a USB-to-serial interface because it combines a Full Speed USB peripheral with multiple general-purpose I/O and timer resources. Firmware can implement protocol conversion, buffering, configuration, and status reporting within the 8 KB RAM and 32 KB ECC Flash limits. The 16 MIPS performance provides headroom for interrupt-driven serial handling alongside USB tasks. Designers should select UART and timer pins from the manufacturer pin tables, account for logic-level translation outside the MCU, and validate enumeration behavior and driver compatibility on the finished product.
Disebarkan
Battery-Powered Sensor Node
The PIC24FJ32GP205-E/PT suits battery-powered sensor nodes that must wake periodically, acquire data, and retain state between active intervals. Its eXtreme Low-Power architecture can reduce sleep current to a few hundred nanoseconds while retaining complete RAM contents, while the 16-bit CPU handles measurements and local processing after wake-up. USB can provide configuration or log extraction when the node is connected. Overall battery life also depends on sensor standby current, regulator quiescent current, USB-state behavior, and the selected external components, so those items must be evaluated as part of the complete power budget.
Disebarkan
USB Control Module
The PIC24FJ32GP205-E/PT can serve as the central controller in a compact USB control module that translates host commands into actuator, indicator, or configuration activity. Its 32 MHz operating speed and 16 MIPS rate support responsive interrupt-driven control, while two-channel DMA capability can assist with peripheral data movement. The 48-pin TQFP provides a conventional surface-mount assembly option but requires careful escape routing because its fine-pitch footprint limits copper width between leads. Validate USB impedance, decoupling, programming access, signal integrity, and thermal performance at production volume before board release.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk PIC24FJ32GP205-E/PT — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | PIC24FJ32GP205-I/PT | PIC24FJ64GP205-E/PT | PIC24FJ64GP205-I/PT | PIC24FJ64GU205-E/PT | PIC24FJ64GU205-I/PT |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 48-pin TQFP (7 mm x 7 mm) | 48-pin TQFP (7 mm x 7 mm) | 48-pin TQFP (7 mm x 7 mm) | 48-pin TQFP (7 mm x 7 mm) | 48-pin TQFP (7 mm x 7 mm) | 48-pin TQFP (7 mm x 7 mm) |
| CPU Architecture | 16-bit PIC24 | 16-bit PIC24 | 16-bit PIC24 | 16-bit PIC24 | 16-bit PIC24 | 16-bit PIC24 |
| Maximum CPU Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Performance | 16 MIPS | 16 MIPS | 16 MIPS | 16 MIPS | 16 MIPS | 16 MIPS |
| Program Memory | 32 KB ECC Flash | 32 KB ECC Flash | 64 KB ECC Flash | 64 KB ECC Flash | 64 KB ECC Flash | 64 KB ECC Flash |
| Data Memory | 8 KB RAM | 8 KB RAM | 8 KB RAM | 8 KB RAM | 8 KB RAM | 8 KB RAM |
| USB Support | Full Speed USB 2.0 Host/Device/OTG | Full Speed USB 2.0 Host/Device/OTG | Full Speed USB 2.0 Host/Device/OTG | Full Speed USB 2.0 Host/Device/OTG | Full Speed USB 2.0 Host/Device/OTG | Full Speed USB 2.0 Host/Device/OTG |
| Temperature Designation | -E extended temperature | -I industrial temperature | -E extended temperature | -I industrial temperature | -E extended temperature | -I industrial temperature |
| DMA Capability | 2 channels | 2 channels | 2 channels | 2 channels | 2 channels | 2 channels |
Penyeberangsung Jelas
- Matches the 32 MB target memory configuration without increasing flash capacity (vsPIC24FJ64GP205-E/PT)
- Provides the required -E temperature-grade designation (vsPIC24FJ32GP205-I/PT)
- Retains the 16-bit, 32 MHz performance profile while offering 8 KB RAM (vsPIC24FJ64GP205-E/PT)
Catatan Desain
Route USB D+ and D- as a short, tightly matched pair between the PIC24FJ32GP205-E/PT and the connector. Apply the PCB stack-up and impedance target recommended by the USB implementation specification rather than relying on a generic trace-width rule. Keep the pair away from switching supplies, inductors, crystal circuits, and high-current return paths. Provide a continuous ground plane beneath the pair and locate ESD protection close to the user-accessible connector.
Use the manufacturer reference circuit to determine which supply pins require local bypass capacitance and how those capacitors should be placed. Place the smallest effective high-frequency capacitor nearest the corresponding pin and retain the larger bulk capacitance at the supply entry point. Check startup, USB attach, active-current, and sleep-current budgets at the system level because the microcontroller's low sleep current does not remove regulator or load losses from the battery budget.
Treat the 48-pin TQFP as a fine-pitch assembly and preserve access to programming and test signals. Maintain the manufacturer land pattern and pin-1 orientation, and avoid placing tall components where they can interfere with a socket, programming fixture, or rework operation. Review oscillator components, USB routing, decoupling, and ground return paths together because changing one area can affect clock integrity, USB signal quality, and electromagnetic emissions.
Do not approve a same-family or cross-brand substitute solely from the 48-pin package name. Compare the complete 48-pin table, alternate-function mapping, USB capability, clock pins, programming pins, memory size, and temperature limits. The 64 KB alternatives can preserve the footprint but alter code-storage capacity and potentially the enabled feature set, so firmware, linker, and qualification reviews are required before substitution.
Maklumat Kesediaan
The product listing identifies the exact MPN as RoHS compliant. REACH, lead-free, halogen-free, conflict-minerals, and automotive qualification details require separate manufacturer or lot documentation.