EFM32ZG222F16-B-QFP48 - 24MHz 16KB Cortex-M0+ MCU | Silicon Labs
MPN: EFM32ZG222F16-B-QFP48 ✓ AktifEFM32ZG222F16-B-QFP48 Ringkasan
An ARM Cortex-M0+ microcontroller is a programmable semiconductor that combines a processor core, memory, and peripherals on one chip. The Cortex-M0+ architecture sits within the ARM embedded processor hierarchy, while the EFM32 Zero Gecko family adds low-power operating modes, fast wake-up behavior, autonomous peripherals, analog functions, and communication peripherals. This combination places the device in the broader category of embedded processors and microcontrollers used for control-oriented electronic products.
The EFM32ZG222F16-B-QFP48 provides 16 KB of Flash for firmware, 4 KB of SRAM for working data, and up to 24 MHz processing performance. Its 37 digital I/O pins support external sensing, control, communications, and user-interface functions. The family data sheet also identifies two 16-bit timers, low-power Stop operation down to 0.5 µA, and Run-mode consumption of 114 µA/MHz. These characteristics make the device suitable when both fast control response and long battery life are important.
The device integrates an ARM Cortex-M0+ core with energy-conscious peripherals designed to operate without continuous CPU intervention. Its low-power platform supports fast wake-up from energy-saving states, while the Zero Gecko family emphasizes analog and digital integration in a small package. The 48-pin TQFP provides more I/O and peripheral connectivity than smaller QFN packages, making this configuration useful for designs requiring both compact size and a generous pin count.
Typical applications include smart energy and gas metering, water-monitoring equipment, industrial sensing nodes, low-power connected sensors, portable instrumentation, and embedded control systems. The 24 MHz Cortex-M0+ core can execute protocol handling, acquisition logic, and control algorithms, while the 16 KB Flash budget is best suited to focused firmware rather than large graphical or storage-intensive applications. Its 37 digital I/O pins also permit multiple sensors, indicators, and communication interfaces to share one controller.
When designing the circuit, connect AVDD_x, VDD_DREG, and IOVDD_x according to the recommendations in the EFM32ZG222 data sheet and application note AN0002, EFM32 Hardware Design Considerations. Keep power and ground routing short, place decoupling capacitors close to their supply pins, and confirm the package dimensions and exposed-pad requirements against the exact ordering code before releasing artwork.
This product overview combines the device specifications, drop-in-family comparisons, and application guidance engineers need when evaluating the EFM32ZG222F16-B-QFP48 for an energy-conscious embedded design. It also highlights the trade-offs between Flash capacity, package choice, and low-power operation for faster engineering decisions.
Pilihan pengganti yang segera untuk EFM32ZG222F16-B-QFP48 — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera EFM32ZG222F16-B-QFP48 (sama faktor bentuk dan kaki) — berbeza dalam Flash Memory, Package, Run Mode Current, Stop Mode Current, Timer Count.
EFM32ZG222F16-QFP48
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →EFM32ZG222F32-QFP48
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →EFM32ZG222F8-QFP48
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →EFM32ZG222F16-B-QFP48 Penilaian maksimum & Ciri-ciri Elektrik
| Product Type | 32-bit ARM Cortex-M0+ microcontroller |
| Series | EFM32 Zero Gecko |
| Maximum CPU Frequency | 24 MHz |
| Flash Memory | 16 KB |
| Flash Organization | 16K x 8 bits |
| RAM Memory | 4 KB |
| Digital I/O Pins | 37 pins |
| Timer Count | 2 timers |
| Timer Resolution | 16-bit |
| Supply Voltage Range | 1.98 V to 3.8 V |
| Stop Mode Current | 0.5 µA |
| Run Mode Current | 114 µA/MHz |
| Processor Core | ARM Cortex-M0+ |
| Word Architecture | 32-bit |
| Kemasan | 48-pin TQFP, 7 mm x 7 mm |
| Jenis Pemasangan | Surface mount |
Panduan Konfigurasi Pin EFM32ZG222F16-B-QFP48 48-pin tqfp, 7 mm x 7 mm
Konfigurasi pin untuk EFM32ZG222F16-B-QFP48 (48-pin tqfp, 7 mm x 7 mm pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.
Tiada data garisan pin yang diperoleh untuk EFM32ZG222F16-B-QFP48.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
EFM32ZG222F16-B-QFP48 patut untuk 6 aplikasis: Smart Energy Metering, Gas and Water Monitoring, Industrial Sensor Nodes, Portable Medical Devices, Low-Power Connected Equipment, Compact Embedded Control.
Smart Energy Metering
The EFM32ZG222F16-B-QFP48 fits metering nodes that must measure, process, and communicate data within a constrained energy budget. Its 24 MHz ARM Cortex-M0+ core supports acquisition logic and communication routines, while 16 KB of Flash stores focused firmware and 4 KB of RAM handles working data. The 37 digital I/O pins allow pulse counting, status indication, and external sensor interfaces. According to the EFM32ZG family data sheet, operation down to 0.5 µA in Stop mode helps reduce energy use between measurement events.
Disebarkan
Gas and Water Monitoring
The EFM32ZG222F16-B-QFP48 can supervise gas, water, and flow-sensing modules that combine low-duty-cycle measurement with local status reporting. Its 16 KB Flash is suitable for compact acquisition and protocol firmware, and its 37 digital I/O pins provide ample connections for sensor inputs, alarm outputs, and serial interfaces. The device's 114 µA/MHz Run-mode figure and 0.5 µA Stop-mode figure support designs intended to extend battery life between readings.
Disebarkan
Industrial Sensor Nodes
The EFM32ZG222F16-B-QFP48 is appropriate for industrial sensor nodes that gather digital measurements and perform local control near the sensed equipment. Its 24 MHz Cortex-M0+ core provides enough performance for sensor conditioning, filtering, and communication-stack tasks, while 37 digital I/O pins simplify connections to discrete sensors and actuators. The 48-pin TQFP also offers more routing flexibility than a smaller QFN package, which helps when power, debug, and field-service signals must remain accessible.
Disebarkan
Portable Medical Devices
The EFM32ZG222F16-B-QFP48 can support compact medical or wellness devices that need deterministic control, low standby consumption, and a moderate number of external connections. Its 4 KB RAM supports focused data acquisition and state handling, while 16 KB Flash accommodates a compact application rather than a large user interface. The 37 I/O pins can support sensors, indicators, buttons, and a serial host interface, while Stop-mode operation as low as 0.5 µA helps conserve power in intermittent-use products.
Disebarkan
Low-Power Connected Equipment
The EFM32ZG222F16-B-QFP48 fits connected equipment that wakes periodically to exchange information and then returns to a low-power state. The Cortex-M0+ core runs at up to 24 MHz for protocol processing and control, and the EFM32ZG platform provides fast wake-up behavior for reducing inactive time. With 4 KB RAM and 16 KB Flash, the device is best positioned as a secondary controller or compact node rather than the host processor for a graphics-intensive system.
Disebarkan
Compact Embedded Control
The EFM32ZG222F16-B-QFP48 works well as the primary controller in compact products requiring timers, digital control, and embedded logic without a higher-cost application processor. Its two 16-bit timers support periodic events, timing functions, and motor or actuator control, while 37 digital I/O pins reduce the need for external I/O expanders. The 24 MHz processing rate and 16 KB Flash provide a practical balance for focused control firmware, provided the application remains within the device's memory limits.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk EFM32ZG222F16-B-QFP48 — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | EFM32ZG222F16-QFP48 | EFM32ZG222F32-QFP48 | EFM32ZG222F8-QFP48 |
|---|---|---|---|---|
| Package | 48-pin TQFP (7x7) | 48-pin TQFP (7x7) | 48-pin TQFP (7x7) | 48-pin TQFP (7x7) |
| Brand | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs |
| Processor Core | ARM Cortex-M0+ | ARM Cortex-M0+ | ARM Cortex-M0+ | ARM Cortex-M0+ |
| Maximum CPU Frequency | 24 MHz | 24 MHz | 24 MHz | 24 MHz |
| Flash Memory | 16 KB | 16 KB | 32 KB | 8 KB |
| RAM Memory | 4 KB | 4 KB | 4 KB | Not stated |
| Digital I/O Pins | 37 pins | 37 pins | 37 pins | Not stated |
| Timer Configuration | 2 x 16-bit timers | 2 x 16-bit timers | 2 x 16-bit timers | Not stated |
| Product Family | EFM32 Zero Gecko | EFM32 Zero Gecko | EFM32 Zero Gecko | EFM32 Zero Gecko |
Penyeberangsung Jelas
- Higher Flash capacity than the reduced-memory same-package option (vsEFM32ZG222F8-QFP48)
- Lower Flash demand than the higher-memory same-package option (vsEFM32ZG222F32-QFP48)
- Closest ordering-code match within the documented family (vsEFM32ZG222F16-QFP48)
Catatan Desain
Connect AVDD_x, VDD_DREG, and IOVDD_x according to the Silicon Labs EFM32ZG222 data sheet and application note AN0002, EFM32 Hardware Design Considerations. Place the required decoupling capacitors directly beside their associated supply and ground pins, and keep the high-current return path short. Check the device's permitted 1.98 V to 3.8 V supply range before designing the regulator and any external analog circuitry.
Route the 24 MHz clock and debug signals away from sensitive analog inputs, and provide the shortest practical ground return between the MCU, decoupling capacitors, and analog sources. The 48-pin TQFP footprint offers additional perimeter access, but that does not remove the need for disciplined topology: place decoupling before branch traces, maintain a continuous ground reference, and review final pin assignments against the package drawing and pin-description table.
Estimated: average Run-mode current at a 24 MHz active clock is 2.736 mA, calculated from the family figure of 114 µA/MHz. This excludes external sensors, communication hardware, and regulator losses. Use this value as an initial active-state budget only, then measure the finished design because peripheral activity and duty cycle can materially change the result.
Do not substitute a lower-Flash member without checking the final linked image size, including startup code, protocol libraries, and update mechanisms. EFM32ZG222F8-QFP48 has 8 KB of Flash versus 16 KB in the target, so apparently minor firmware growth can make a nominal footprint-compatible replacement unusable. Likewise, verify ordering suffixes and temperature requirements before approving any substitution.
Maklumat Kesediaan
Compliance status requires confirmation against the exact ordering code and current manufacturer declarations.