PIC24FJ64GU203-E/M5 - 32MHz 16-Bit MCU | Microchip
MPN: PIC24FJ64GU203-E/M5 ✓ AktifPIC24FJ64GU203-E/M5 Ringkasan
A microcontroller is a programmable semiconductor that integrates a processor core, memory, communication peripherals, timers, and I/O into one compact device. The PIC24FJ64GU203 belongs to Microchip's PIC24FJ family of eXtreme Low-Power devices. Its architecture supports compact control, data acquisition, communications, and USB applications without requiring separate peripheral devices for common serial interfaces.
Key device features include 64 KB of ECC Flash for firmware storage, 8 KB of data RAM, and 26 I/O pins. Full Speed USB 2.0 operation supports Host, Device, and OTG roles. The family also provides core-independent peripherals and low sleep current, with the manufacturer describing sleep consumption as down to a few hundreds of nA while retaining context. These characteristics support systems where USB connectivity and low standby power are both important.
The PIC24FJ64GU203-E/M5 combines a 16-bit PIC24 CPU with an operating frequency up to 32 MHz and an instruction throughput of 16 MIPS. ECC Flash helps detect and manage errors in stored program data, while the two I2C and two SPI channels allow simultaneous connections to sensors, memory, displays, and other serial peripherals. Two UART channels provide additional asynchronous communication paths for external radios or industrial equipment.
Typical applications include USB-connected data loggers, portable instruments, compact control panels, sensor-hub boards, and industrial diagnostic equipment. Its 5 mm by 5 mm UQFN package supports space-constrained designs, while the automotive E temperature grade identifies the target qualification range. The exposed-pad package also requires careful PCB thermal design and assembly-process control.
When laying out the board, follow the manufacturer's 36-UQFN land pattern and preserve the exposed-pad connection specified by the package drawing. Place decoupling capacitors close to the supply pins, route USB D-plus and D-minus as a controlled impedance differential pair, and keep high-current or high-switching nodes away from sensitive analog inputs. Validate programming, clock, and peripheral behavior on the assembled design before production.
This page consolidates the PIC24FJ64GU203-E/M5 device specifications, interface capabilities, application guidance, and available replacement information into an engineering-focused selection resource. It also distinguishes the automotive-grade E/M5 ordering option from the industrial-grade I/M5 variant to help designers assess substitution risk before changing an approved BOM.
Pilihan pengganti yang segera untuk PIC24FJ64GU203-E/M5 — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera PIC24FJ64GU203-E/M5 (sama faktor bentuk dan kaki) — berbeza dalam Package, USB Interface.
PIC24FJ64GU203-I/M5
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →PIC24FJ64GU203-E/M5 Penilaian maksimum & Ciri-ciri Elektrik
| Microcontroller Type | 16-bit PIC24 RISC microcontroller |
| Maximum CPU Frequency | 32 MHz |
| Instruction Throughput | 16 MIPS |
| Program Flash Memory | 64 KB ECC Flash |
| Data RAM | 8 KB |
| I/O Pin Count | 26 I/O |
| Supply Voltage Range | 2 V to 3.6 V |
| USB Interface | Full Speed USB 2.0 Host, Device, and OTG |
| I2C Interface Count | 2 channels |
| SPI Interface Count | 2 channels |
| UART Interface Count | 2 channels |
| Sleep Current | Down to a few hundreds of nA |
| Temperature Grade | Automotive E-grade |
| Kemasan | 36-lead UQFN, 5 mm x 5 mm |
| Package Code | HVQCCN |
| Package Shape | Square no-lead |
| Terminal Count | 36 terminals |
Panduan Konfigurasi Pin PIC24FJ64GU203-E/M5 square no-lead
Konfigurasi pin untuk PIC24FJ64GU203-E/M5 (square no-lead pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.
Tiada data garisan pin yang diperoleh untuk PIC24FJ64GU203-E/M5.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
PIC24FJ64GU203-E/M5 patut untuk 6 aplikasis: USB Data Loggers, Portable Measurement Instruments, Industrial Sensor Hubs, Compact Control Panels, USB OTG Field Equipment, Automotive Diagnostic Accessories.
USB Data Loggers
The PIC24FJ64GU203-E/M5 fits USB data loggers because its Full Speed USB 2.0 Device support operates alongside a 32 MHz PIC24 core and 64 KB ECC Flash. Two I2C and two SPI channels can connect temperature sensors, memory, and external converters, while two UART channels support radio or instrument links. The 8 KB RAM supports working buffers, and the 36-UQFN package preserves a compact footprint. Firmware should use the manufacturer USB stack and validate enumeration, suspend, and bus-power behavior across the required operating environment.
Disebarkan
Portable Measurement Instruments
PIC24FJ64GU203-E/M5 is appropriate for portable measurement instruments that combine low-power standby operation with multiple serial interfaces. The 32 MHz core supports responsive control and data processing, while 8 KB RAM and 64 KB ECC Flash cover embedded acquisition and logging workloads. Two I2C channels can serve sensors, two SPI channels can connect displays or ADC components, and the UART channels provide expansion for external modules. Sleep current down to a few hundreds of nA helps conserve battery capacity, although system leakage and sensor duty cycle determine total runtime.
Disebarkan
Industrial Sensor Hubs
The PIC24FJ64GU203-E/M5 supports industrial sensor-hub designs that need to aggregate several low-speed sensors and expose data through USB. Its two I2C and two SPI channels allow parallel connection of digital sensors, transceivers, and memory devices, while two UARTs support downstream controllers. The automotive E-grade ordering option is useful when the enclosure experiences extended-temperature environments, but the required qualification and maximum operating temperature must be confirmed against the system specification. ECC Flash also improves control over errors in stored firmware.
Disebarkan
Compact Control Panels
A compact user control panel can use the PIC24FJ64GU203-E/M5 to manage display inputs, indicators, communications, and USB host or device connections. The 26 I/O pins provide dedicated digital interfaces, while the 32 MHz processor supports responsive menu and signal-processing tasks. Two UARTs are useful for auxiliary controllers, and the dual I2C and SPI channels can connect touch controllers, displays, or expansion boards. The 5 mm by 5 mm UQFN package reduces board area, although its exposed pad requires uninterrupted copper and controlled assembly reflow conditions.
Disebarkan
USB OTG Field Equipment
PIC24FJ64GU203-E/M5 is well suited to field equipment that may operate as a USB host, USB device, or OTG endpoint. Full Speed USB 2.0 support permits direct connection to a host computer, removable storage, or another portable device without an external interface controller. The 32 MHz PIC24 core, 64 KB ECC Flash, and 8 KB RAM provide a compact control platform. Designers should account for the additional power and signal-management requirements of OTG roles, including correct pull-up or pull-down implementation and role-swap handling.
Disebarkan
Automotive Diagnostic Accessories
The automotive E-grade PIC24FJ64GU203-E/M5 can support compact diagnostic and service accessories that require USB connectivity and low-power operation. Two UART channels can interface with vehicle or test equipment, while I2C and SPI support sensors and external transceivers. The 32 MHz processing rate supports protocol handling and control tasks, and the 64 KB ECC Flash is suitable for embedded application firmware. The E-grade designation makes the ordering option relevant to automotive-temperature designs, but AEC-Q100 status, temperature limits, and all functional-safety requirements must be verified separately before deployment.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk PIC24FJ64GU203-E/M5 — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | PIC24FJ64GU203-I/M5 |
|---|---|---|
| Brand | Microchip Technology | Microchip Technology |
| Package | 36-UQFN (5x5) | 36-UQFN (5x5) |
| CPU Architecture | 16-bit PIC24 RISC | 16-bit PIC RISC |
| Maximum Frequency | 32 MHz | 32 MHz |
| Instruction Throughput | 16 MIPS | 16 MIPS |
| Program Memory | 64 KB ECC Flash | 64 KB Flash |
| Data Memory | 8 KB RAM | 8 KB RAM |
| Temperature Grade | Automotive E-grade | Industrial I-grade |
| USB Support | Full Speed USB 2.0 Host, Device, and OTG | USB |
| Low-Power Feature | XLP | XLP |
| Terminal Count | 36 terminals | 36 terminals |
Penyeberangsung Jelas
- Automotive E temperature-grade ordering option (vsPIC24FJ64GU203-I/M5)
- Full USB role support for compact embedded designs (vsPIC24FJ64GU203-I/M5)
- ECC program memory in a compact 36-UQFN device (vsPIC24FJ64GU203-I/M5)
Catatan Desain
Use the Microchip recommended land pattern for the 36-UQFN 5 mm by 5 mm package rather than a generic 36-pin QFN footprint. Preserve the exposed-pad connection with a solder mask opening and thermal-via pattern that match the package drawing. Confirm paste volume and reflow profile against assembly requirements, because the compact terminal pitch and exposed pad can otherwise produce solder-bridging or voiding defects.
Route the USB D-plus and D-minus pair as a short, continuous differential pair with the geometry specified by Microchip. Keep the pair away from clocks, switching regulators, high-current loads, and long parallel traces. Provide the required USB connection and filtering components close to the controller pins. Differential impedance and USB signal quality should be verified on prototypes because the same 2 V to 3.6 V device also supports low-power and sensor-oriented functions.
Place the required bypass and decoupling capacitors at the device supply pins using the shortest possible current-loop paths. Separate the noisy return current from sensitive analog and communications returns, and keep the exposed-pad connection electrically continuous to ground. If the design uses USB bus power, account for the additional transient and supply-current requirements of USB alongside the PIC24FJ64GU203-E/M5's active and sleep consumption.
Do not treat the E-grade and I-grade ordering codes as unconditional equivalents. PIC24FJ64GU203-E/M5 targets an automotive temperature grade, while PIC24FJ64GU203-I/M5 targets an industrial grade. Before substitution, compare the family datasheet, operating-temperature limits, qualification requirements, USB behavior, clock configuration, pin multiplexing, and application firmware. Also verify the exposed-pad footprint during the PCB review.
Maklumat Kesediaan
The automotive E-grade suffix is identified for PIC24FJ64GU203-E/M5, but a specific AEC-Q100 qualification statement and separate RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not established.